diff mbox

fdc: simplify media change handling

Message ID 1335294956-4396-1-git-send-email-hpoussin@reactos.org
State New
Headers show

Commit Message

Hervé Poussineau April 24, 2012, 7:15 p.m. UTC 
This also (partly) fixes IBM OS/2 Warp 4.0 floppy installation, where
not all floppies have the same format (2x80x18 for the first ones,
2x80x23 for the next ones).

Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
---
 hw/fdc.c |   29 +++++++++++------------------
 1 file changed, 11 insertions(+), 18 deletions(-)

Comments

Pavel Hrdina April 24, 2012, 8:21 p.m. UTC | #1 
On 04/24/2012 09:15 PM, Hervé Poussineau wrote:
> This also (partly) fixes IBM OS/2 Warp 4.0 floppy installation, where
> not all floppies have the same format (2x80x18 for the first ones,
> 2x80x23 for the next ones).
>
> Signed-off-by: Hervé Poussineau<hpoussin@reactos.org>
Hi, it isn't fix the media missing issue. I booted guest with media 
inserted, then eject media using qemu monitor and try to mount it. With 
this patch guest ended with kernel panic.

Pavel
diff mbox

Patch

diff --git a/hw/fdc.c b/hw/fdc.c
index a0236b7..bc0c3f6 100644
--- a/hw/fdc.c
+++ b/hw/fdc.c
@@ -702,6 +702,15 @@  static void fdctrl_raise_irq(FDCtrl *fdctrl, uint8_t status0)
         qemu_set_irq(fdctrl->irq, 1);
         fdctrl->sra |= FD_SRA_INTPEND;
     }
+    if (status0 & FD_SR0_SEEK) {
+        FDrive *cur_drv;
+        /* A seek clears the disk change line (if a disk is inserted) */
+        cur_drv = get_cur_drv(fdctrl);
+        if (cur_drv->max_track) {
+            cur_drv->media_changed = 0;
+        }
+    }
+
     fdctrl->reset_sensei = 0;
     fdctrl->status0 = status0;
     FLOPPY_DPRINTF("Set interrupt status to 0x%02x\n", fdctrl->status0);
@@ -933,23 +942,7 @@  static void fdctrl_write_ccr(FDCtrl *fdctrl, uint32_t value)
 
 static int fdctrl_media_changed(FDrive *drv)
 {
-    int ret;
-
-    if (!drv->bs)
-        return 0;
-    if (drv->media_changed) {
-        drv->media_changed = 0;
-        ret = 1;
-    } else {
-        ret = bdrv_media_changed(drv->bs);
-        if (ret < 0) {
-            ret = 0;            /* we don't know, assume no */
-        }
-    }
-    if (ret) {
-        fd_revalidate(drv);
-    }
-    return ret;
+    return drv->media_changed;
 }
 
 /* Digital input register : 0x07 (read-only) */
@@ -1853,6 +1846,7 @@  static void fdctrl_change_cb(void *opaque, bool load)
     FDrive *drive = opaque;
 
     drive->media_changed = 1;
+    fd_revalidate(drive);
 }
 
 static const BlockDevOps fdctrl_block_ops = {
@@ -1883,7 +1877,6 @@  static int fdctrl_connect_drives(FDCtrl *fdctrl)
         fd_init(drive);
         fd_revalidate(drive);
         if (drive->bs) {
-            drive->media_changed = 1;
             bdrv_set_dev_ops(drive->bs, &fdctrl_block_ops, drive);
         }
     }