diff mbox

[net-next,3/6] e1000e: cleanup remaining strings split across multiple lines

Message ID 1334394991-5839-4-git-send-email-jeffrey.t.kirsher@intel.com
State Accepted, archived
Delegated to: David Miller
Headers show

Commit Message

Kirsher, Jeffrey T April 14, 2012, 9:16 a.m. UTC 
From: Bruce Allan <bruce.w.allan@intel.com>

Now that split strings generate checkpatch warnings (per Chapter 2 of
Documentation/CodingStyle to make it easier to grep the code for the
string) cleanup the remaining instances of them in the driver.

Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/e1000e/ethtool.c |   19 ++++++++-----------
 drivers/net/ethernet/intel/e1000e/param.c   |    8 ++++----
 2 files changed, 12 insertions(+), 15 deletions(-)
diff mbox

Patch

diff --git a/drivers/net/ethernet/intel/e1000e/ethtool.c b/drivers/net/ethernet/intel/e1000e/ethtool.c
index 6302b10..4f1edd9 100644
--- a/drivers/net/ethernet/intel/e1000e/ethtool.c
+++ b/drivers/net/ethernet/intel/e1000e/ethtool.c
@@ -259,8 +259,7 @@  static int e1000_set_settings(struct net_device *netdev,
 	 * cannot be changed
 	 */
 	if (hw->phy.ops.check_reset_block(hw)) {
-		e_err("Cannot change link characteristics when SoL/IDER is "
-		      "active.\n");
+		e_err("Cannot change link characteristics when SoL/IDER is active.\n");
 		return -EINVAL;
 	}
 
@@ -727,9 +726,8 @@  static bool reg_pattern_test(struct e1000_adapter *adapter, u64 *data,
 				      (test[pat] & write));
 		val = E1000_READ_REG_ARRAY(&adapter->hw, reg, offset);
 		if (val != (test[pat] & write & mask)) {
-			e_err("pattern test reg %04X failed: got 0x%08X "
-			      "expected 0x%08X\n", reg + offset, val,
-			      (test[pat] & write & mask));
+			e_err("pattern test reg %04X failed: got 0x%08X expected 0x%08X\n",
+			      reg + offset, val, (test[pat] & write & mask));
 			*data = reg;
 			return 1;
 		}
@@ -744,8 +742,8 @@  static bool reg_set_and_check(struct e1000_adapter *adapter, u64 *data,
 	__ew32(&adapter->hw, reg, write & mask);
 	val = __er32(&adapter->hw, reg);
 	if ((write & mask) != (val & mask)) {
-		e_err("set/check reg %04X test failed: got 0x%08X "
-		      "expected 0x%08X\n", reg, (val & mask), (write & mask));
+		e_err("set/check reg %04X test failed: got 0x%08X expected 0x%08X\n",
+		      reg, (val & mask), (write & mask));
 		*data = reg;
 		return 1;
 	}
@@ -797,8 +795,8 @@  static int e1000_reg_test(struct e1000_adapter *adapter, u64 *data)
 	ew32(STATUS, toggle);
 	after = er32(STATUS) & toggle;
 	if (value != after) {
-		e_err("failed STATUS register test got: 0x%08X expected: "
-		      "0x%08X\n", after, value);
+		e_err("failed STATUS register test got: 0x%08X expected: 0x%08X\n",
+		      after, value);
 		*data = 1;
 		return 1;
 	}
@@ -1791,8 +1789,7 @@  static void e1000_get_wol(struct net_device *netdev,
 		wol->supported &= ~WAKE_UCAST;
 
 		if (adapter->wol & E1000_WUFC_EX)
-			e_err("Interface does not support directed (unicast) "
-			      "frame wake-up packets\n");
+			e_err("Interface does not support directed (unicast) frame wake-up packets\n");
 	}
 
 	if (adapter->wol & E1000_WUFC_EX)
diff --git a/drivers/net/ethernet/intel/e1000e/param.c b/drivers/net/ethernet/intel/e1000e/param.c
index ff796e4..feb6eeb 100644
--- a/drivers/net/ethernet/intel/e1000e/param.c
+++ b/drivers/net/ethernet/intel/e1000e/param.c
@@ -166,8 +166,8 @@  E1000_PARAM(WriteProtectNVM, "Write-protect NVM [WARNING: disabling this can lea
  *
  * Default Value: 1 (enabled)
  */
-E1000_PARAM(CrcStripping, "Enable CRC Stripping, disable if your BMC needs " \
-                          "the CRC");
+E1000_PARAM(CrcStripping,
+	    "Enable CRC Stripping, disable if your BMC needs the CRC");
 
 struct e1000_option {
 	enum { enable_option, range_option, list_option } type;
@@ -360,8 +360,8 @@  void __devinit e1000e_check_options(struct e1000_adapter *adapter)
 				adapter->itr = 20000;
 				break;
 			case 4:
-				e_info("%s set to simplified (2000-8000 ints) "
-				       "mode\n", opt.name);
+				e_info("%s set to simplified (2000-8000 ints) mode\n",
+				       opt.name);
 				adapter->itr_setting = 4;
 				break;
 			default: