diff mbox

sky2: in free_buffers() do proper checks before call of rx_clean()

Message ID 20120413102413.41c0d053@nehalam.linuxnetplumber.net
State RFC, archived
Delegated to: David Miller
Headers show

Commit Message

stephen hemminger April 13, 2012, 5:24 p.m. UTC 
How about this instead? It moves the rx_clean out of free_buffers and
into the proper place in the unwind code.


--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

--- a/drivers/net/ethernet/marvell/sky2.c	2012-04-12 08:07:11.572640522 -0700
+++ b/drivers/net/ethernet/marvell/sky2.c	2012-04-13 10:19:39.466839378 -0700
@@ -1630,7 +1630,8 @@  static int sky2_alloc_buffers(struct sky
 	if (!sky2->rx_ring)
 		goto nomem;
 
-	return sky2_alloc_rx_skbs(sky2);
+	return 0;
+
 nomem:
 	return -ENOMEM;
 }
@@ -1639,8 +1640,6 @@  static void sky2_free_buffers(struct sky
 {
 	struct sky2_hw *hw = sky2->hw;
 
-	sky2_rx_clean(sky2);
-
 	if (sky2->rx_le) {
 		pci_free_consistent(hw->pdev, RX_LE_BYTES,
 				    sky2->rx_le, sky2->rx_le_map);
@@ -1761,9 +1760,13 @@  static int sky2_open(struct net_device *
 	if (err)
 		goto err_out;
 
+	err = sky2_alloc_rx_skbs(sky2);
+	if (err)
+		goto err_clean;
+
 	/* With single port, IRQ is setup when device is brought up */
 	if (hw->ports == 1 && (err = sky2_setup_irq(hw, dev->name)))
-		goto err_out;
+		goto err_clean;
 
 	sky2_hw_up(sky2);
 
@@ -1783,6 +1786,8 @@  static int sky2_open(struct net_device *
 
 	return 0;
 
+err_clean:
+	sky2_rx_clean(sky2);
 err_out:
 	sky2_free_buffers(sky2);
 	return err;
@@ -2158,6 +2163,7 @@  static int sky2_close(struct net_device
 
 	sky2_hw_down(sky2);
 
+	sky2_rx_clean(sky2);
 	sky2_free_buffers(sky2);
 
 	return 0;