Patchwork [git,commit] qemu/microblazebe-mmu: add new sample config

login
register
mail settings
Submitter Peter Korsgaard
Date April 4, 2012, 8:49 p.m.
Message ID <20120405111656.3FA6196A0E@busybox.osuosl.org>
Download mbox | patch
Permalink /patch/150931/
State Not Applicable
Headers show

Comments

Peter Korsgaard - April 4, 2012, 8:49 p.m.
commit: http://git.buildroot.net/buildroot/commit/?id=082751ea823b5b887f88e2cebd7c093726c2a02b
branch: http://git.buildroot.net/buildroot/commit/?id=refs/heads/master

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Tested-by: Stephan Hoffmann <sho@reLinux.de>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
---
 board/qemu/microblazebe-mmu/kernel-3.3.config |   68 +++++
 board/qemu/microblazebe-mmu/readme.txt        |    6 +
 board/qemu/microblazebe-mmu/system.dts        |  367 +++++++++++++++++++++++++
 configs/qemu_microblazebe_mmu_defconfig       |   16 +
 4 files changed, 457 insertions(+), 0 deletions(-)

Patch

diff --git a/board/qemu/microblazebe-mmu/kernel-3.3.config b/board/qemu/microblazebe-mmu/kernel-3.3.config
new file mode 100644
index 0000000..7083cf5
--- /dev/null
+++ b/board/qemu/microblazebe-mmu/kernel-3.3.config
@@ -0,0 +1,68 @@ 
+CONFIG_EXPERIMENTAL=y
+CONFIG_SYSVIPC=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE="rootfs.cpio"
+CONFIG_INITRAMFS_COMPRESSION_GZIP=y
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_EXPERT=y
+CONFIG_KALLSYMS_ALL=y
+CONFIG_KALLSYMS_EXTRA_PASS=y
+# CONFIG_HOTPLUG is not set
+# CONFIG_BASE_FULL is not set
+# CONFIG_FUTEX is not set
+# CONFIG_EPOLL is not set
+# CONFIG_SIGNALFD is not set
+# CONFIG_SHMEM is not set
+CONFIG_SLAB=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_BLK_DEV_BSG is not set
+CONFIG_OPT_LIB_ASM=y
+CONFIG_XILINX_MICROBLAZE0_FAMILY="spartan3adsp"
+CONFIG_XILINX_MICROBLAZE0_USE_MSR_INSTR=1
+CONFIG_XILINX_MICROBLAZE0_USE_PCMP_INSTR=1
+CONFIG_XILINX_MICROBLAZE0_USE_BARREL=1
+CONFIG_XILINX_MICROBLAZE0_USE_HW_MUL=1
+CONFIG_HZ_100=y
+CONFIG_MMU=y
+CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE_FORCE=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+# CONFIG_INET_LRO is not set
+# CONFIG_IPV6 is not set
+CONFIG_PROC_DEVICETREE=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_SIZE=8192
+CONFIG_NETDEVICES=y
+CONFIG_NET_ETHERNET=y
+CONFIG_XILINX_EMACLITE=y
+# CONFIG_INPUT is not set
+# CONFIG_SERIO is not set
+# CONFIG_VT is not set
+CONFIG_SERIAL_UARTLITE=y
+CONFIG_SERIAL_UARTLITE_CONSOLE=y
+# CONFIG_HW_RANDOM is not set
+# CONFIG_HWMON is not set
+# CONFIG_USB_SUPPORT is not set
+CONFIG_EXT2_FS=y
+# CONFIG_DNOTIFY is not set
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_CIFS=y
+CONFIG_CIFS_STATS=y
+CONFIG_CIFS_STATS2=y
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_DEBUG_KERNEL=y
+CONFIG_DETECT_HUNG_TASK=y
+CONFIG_DEBUG_SLAB=y
+CONFIG_DEBUG_SPINLOCK=y
+CONFIG_DEBUG_INFO=y
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+CONFIG_EARLY_PRINTK=y
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
diff --git a/board/qemu/microblazebe-mmu/readme.txt b/board/qemu/microblazebe-mmu/readme.txt
new file mode 100644
index 0000000..c59c0bd
--- /dev/null
+++ b/board/qemu/microblazebe-mmu/readme.txt
@@ -0,0 +1,6 @@ 
+Run the emulation with:
+
+ qemu-system-microblaze -M petalogix-s3adsp1800 -kernel output/images/linux.bin -serial stdio
+
+The login prompt will appear in the terminal that started Qemu.
+
diff --git a/board/qemu/microblazebe-mmu/system.dts b/board/qemu/microblazebe-mmu/system.dts
new file mode 100644
index 0000000..3f85df2
--- /dev/null
+++ b/board/qemu/microblazebe-mmu/system.dts
@@ -0,0 +1,367 @@ 
+/*
+ * Device Tree Generator version: 1.1
+ *
+ * (C) Copyright 2007-2008 Xilinx, Inc.
+ * (C) Copyright 2007-2009 Michal Simek
+ *
+ * Michal SIMEK <monstr@monstr.eu>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ * CAUTION: This file is automatically generated by libgen.
+ * Version: Xilinx EDK 10.1.03 EDK_K_SP3.6
+ *
+ * XPS project directory: Xilinx-ML505-ll_temac-sgdma-MMU-FDT-edk101
+ */
+
+/dts-v1/;
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "xlnx,microblaze";
+	hard-reset-gpios = <&LEDs_8Bit 2 1>;
+	model = "testing";
+	DDR2_SDRAM: memory@90000000 {
+		device_type = "memory";
+		reg = < 0x90000000 0x10000000 >;
+	} ;
+	aliases {
+		ethernet0 = &Hard_Ethernet_MAC;
+		serial0 = &RS232_Uart_1;
+	} ;
+	chosen {
+		bootargs = "console=ttyUL0,115200 highres=on";
+		linux,stdout-path = "/plb@0/serial@84000000";
+	} ;
+	cpus {
+		#address-cells = <1>;
+		#cpus = <0x1>;
+		#size-cells = <0>;
+		microblaze_0: cpu@0 {
+			clock-frequency = <125000000>;
+			compatible = "xlnx,microblaze-7.10.d";
+			d-cache-baseaddr = <0x90000000>;
+			d-cache-highaddr = <0x9fffffff>;
+			d-cache-line-size = <0x10>;
+			d-cache-size = <0x2000>;
+			device_type = "cpu";
+			i-cache-baseaddr = <0x90000000>;
+			i-cache-highaddr = <0x9fffffff>;
+			i-cache-line-size = <0x10>;
+			i-cache-size = <0x2000>;
+			model = "microblaze,7.10.d";
+			reg = <0>;
+			timebase-frequency = <125000000>;
+			xlnx,addr-tag-bits = <0xf>;
+			xlnx,allow-dcache-wr = <0x1>;
+			xlnx,allow-icache-wr = <0x1>;
+			xlnx,area-optimized = <0x0>;
+			xlnx,cache-byte-size = <0x2000>;
+			xlnx,d-lmb = <0x1>;
+			xlnx,d-opb = <0x0>;
+			xlnx,d-plb = <0x1>;
+			xlnx,data-size = <0x20>;
+			xlnx,dcache-addr-tag = <0xf>;
+			xlnx,dcache-always-used = <0x1>;
+			xlnx,dcache-byte-size = <0x2000>;
+			xlnx,dcache-line-len = <0x4>;
+			xlnx,dcache-use-fsl = <0x1>;
+			xlnx,debug-enabled = <0x1>;
+			xlnx,div-zero-exception = <0x1>;
+			xlnx,dopb-bus-exception = <0x0>;
+			xlnx,dynamic-bus-sizing = <0x1>;
+			xlnx,edge-is-positive = <0x1>;
+			xlnx,family = "virtex5";
+			xlnx,endianness = <0x1>;
+			xlnx,fpu-exception = <0x1>;
+			xlnx,fsl-data-size = <0x20>;
+			xlnx,fsl-exception = <0x0>;
+			xlnx,fsl-links = <0x0>;
+			xlnx,i-lmb = <0x1>;
+			xlnx,i-opb = <0x0>;
+			xlnx,i-plb = <0x1>;
+			xlnx,icache-always-used = <0x1>;
+			xlnx,icache-line-len = <0x4>;
+			xlnx,icache-use-fsl = <0x1>;
+			xlnx,ill-opcode-exception = <0x1>;
+			xlnx,instance = "microblaze_0";
+			xlnx,interconnect = <0x1>;
+			xlnx,interrupt-is-edge = <0x0>;
+			xlnx,iopb-bus-exception = <0x0>;
+			xlnx,mmu-dtlb-size = <0x4>;
+			xlnx,mmu-itlb-size = <0x2>;
+			xlnx,mmu-tlb-access = <0x3>;
+			xlnx,mmu-zones = <0x10>;
+			xlnx,number-of-pc-brk = <0x1>;
+			xlnx,number-of-rd-addr-brk = <0x0>;
+			xlnx,number-of-wr-addr-brk = <0x0>;
+			xlnx,opcode-0x0-illegal = <0x1>;
+			xlnx,pvr = <0x2>;
+			xlnx,pvr-user1 = <0x0>;
+			xlnx,pvr-user2 = <0x0>;
+			xlnx,reset-msr = <0x0>;
+			xlnx,sco = <0x0>;
+			xlnx,unaligned-exceptions = <0x1>;
+			xlnx,use-barrel = <0x1>;
+			xlnx,use-dcache = <0x1>;
+			xlnx,use-div = <0x1>;
+			xlnx,use-ext-brk = <0x1>;
+			xlnx,use-ext-nm-brk = <0x1>;
+			xlnx,use-extended-fsl-instr = <0x0>;
+			xlnx,use-fpu = <0x2>;
+			xlnx,use-hw-mul = <0x2>;
+			xlnx,use-icache = <0x1>;
+			xlnx,use-interrupt = <0x1>;
+			xlnx,use-mmu = <0x3>;
+			xlnx,use-msr-instr = <0x1>;
+			xlnx,use-pcmp-instr = <0x1>;
+		} ;
+	} ;
+	mb_plb: plb@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "xlnx,plb-v46-1.03.a", "xlnx,plb-v46-1.00.a", "simple-bus";
+		ranges ;
+		FLASH: flash@a0000000 {
+			bank-width = <2>;
+			compatible = "xlnx,xps-mch-emc-2.00.a", "cfi-flash";
+			reg = < 0xa0000000 0x2000000 >;
+			xlnx,family = "virtex5";
+			xlnx,include-datawidth-matching-0 = <0x1>;
+			xlnx,include-datawidth-matching-1 = <0x0>;
+			xlnx,include-datawidth-matching-2 = <0x0>;
+			xlnx,include-datawidth-matching-3 = <0x0>;
+			xlnx,include-negedge-ioregs = <0x0>;
+			xlnx,include-plb-ipif = <0x1>;
+			xlnx,include-wrbuf = <0x1>;
+			xlnx,max-mem-width = <0x10>;
+			xlnx,mch-native-dwidth = <0x20>;
+			xlnx,mch-plb-clk-period-ps = <0x1f40>;
+			xlnx,mch-splb-awidth = <0x20>;
+			xlnx,mch0-accessbuf-depth = <0x10>;
+			xlnx,mch0-protocol = <0x0>;
+			xlnx,mch0-rddatabuf-depth = <0x10>;
+			xlnx,mch1-accessbuf-depth = <0x10>;
+			xlnx,mch1-protocol = <0x0>;
+			xlnx,mch1-rddatabuf-depth = <0x10>;
+			xlnx,mch2-accessbuf-depth = <0x10>;
+			xlnx,mch2-protocol = <0x0>;
+			xlnx,mch2-rddatabuf-depth = <0x10>;
+			xlnx,mch3-accessbuf-depth = <0x10>;
+			xlnx,mch3-protocol = <0x0>;
+			xlnx,mch3-rddatabuf-depth = <0x10>;
+			xlnx,mem0-width = <0x10>;
+			xlnx,mem1-width = <0x20>;
+			xlnx,mem2-width = <0x20>;
+			xlnx,mem3-width = <0x20>;
+			xlnx,num-banks-mem = <0x1>;
+			xlnx,num-channels = <0x0>;
+			xlnx,priority-mode = <0x0>;
+			xlnx,synch-mem-0 = <0x0>;
+			xlnx,synch-mem-1 = <0x0>;
+			xlnx,synch-mem-2 = <0x0>;
+			xlnx,synch-mem-3 = <0x0>;
+			xlnx,synch-pipedelay-0 = <0x2>;
+			xlnx,synch-pipedelay-1 = <0x2>;
+			xlnx,synch-pipedelay-2 = <0x2>;
+			xlnx,synch-pipedelay-3 = <0x2>;
+			xlnx,tavdv-ps-mem-0 = <0x1adb0>;
+			xlnx,tavdv-ps-mem-1 = <0x3a98>;
+			xlnx,tavdv-ps-mem-2 = <0x3a98>;
+			xlnx,tavdv-ps-mem-3 = <0x3a98>;
+			xlnx,tcedv-ps-mem-0 = <0x1adb0>;
+			xlnx,tcedv-ps-mem-1 = <0x3a98>;
+			xlnx,tcedv-ps-mem-2 = <0x3a98>;
+			xlnx,tcedv-ps-mem-3 = <0x3a98>;
+			xlnx,thzce-ps-mem-0 = <0x88b8>;
+			xlnx,thzce-ps-mem-1 = <0x1b58>;
+			xlnx,thzce-ps-mem-2 = <0x1b58>;
+			xlnx,thzce-ps-mem-3 = <0x1b58>;
+			xlnx,thzoe-ps-mem-0 = <0x1b58>;
+			xlnx,thzoe-ps-mem-1 = <0x1b58>;
+			xlnx,thzoe-ps-mem-2 = <0x1b58>;
+			xlnx,thzoe-ps-mem-3 = <0x1b58>;
+			xlnx,tlzwe-ps-mem-0 = <0x88b8>;
+			xlnx,tlzwe-ps-mem-1 = <0x0>;
+			xlnx,tlzwe-ps-mem-2 = <0x0>;
+			xlnx,tlzwe-ps-mem-3 = <0x0>;
+			xlnx,twc-ps-mem-0 = <0x2af8>;
+			xlnx,twc-ps-mem-1 = <0x3a98>;
+			xlnx,twc-ps-mem-2 = <0x3a98>;
+			xlnx,twc-ps-mem-3 = <0x3a98>;
+			xlnx,twp-ps-mem-0 = <0x11170>;
+			xlnx,twp-ps-mem-1 = <0x2ee0>;
+			xlnx,twp-ps-mem-2 = <0x2ee0>;
+			xlnx,twp-ps-mem-3 = <0x2ee0>;
+			xlnx,xcl0-linesize = <0x4>;
+			xlnx,xcl0-writexfer = <0x1>;
+			xlnx,xcl1-linesize = <0x4>;
+			xlnx,xcl1-writexfer = <0x1>;
+			xlnx,xcl2-linesize = <0x4>;
+			xlnx,xcl2-writexfer = <0x1>;
+			xlnx,xcl3-linesize = <0x4>;
+			xlnx,xcl3-writexfer = <0x1>;
+		} ;
+		Hard_Ethernet_MAC: xps-ll-temac@81c00000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "xlnx,compound";
+			ranges ;
+			ethernet@81c00000 {
+				compatible = "xlnx,xps-ll-temac-1.01.b", "xlnx,xps-ll-temac-1.00.a";
+				device_type = "network";
+				interrupt-parent = <&xps_intc_0>;
+				interrupts = < 5 2 >;
+				llink-connected = <&PIM3>;
+				local-mac-address = [ 00 0a 35 00 00 00 ];
+				reg = < 0x81c00000 0x40 >;
+				xlnx,bus2core-clk-ratio = <0x1>;
+				xlnx,phy-type = <0x1>;
+				xlnx,phyaddr = <0x1>;
+				xlnx,rxcsum = <0x0>;
+				xlnx,rxfifo = <0x1000>;
+				xlnx,temac-type = <0x0>;
+				xlnx,txcsum = <0x0>;
+				xlnx,txfifo = <0x1000>;
+			} ;
+		} ;
+		IIC_EEPROM: i2c@81600000 {
+			compatible = "xlnx,xps-iic-2.00.a";
+			interrupt-parent = <&xps_intc_0>;
+			interrupts = < 6 2 >;
+			reg = < 0x81600000 0x10000 >;
+			xlnx,clk-freq = <0x7735940>;
+			xlnx,family = "virtex5";
+			xlnx,gpo-width = <0x1>;
+			xlnx,iic-freq = <0x186a0>;
+			xlnx,scl-inertial-delay = <0x0>;
+			xlnx,sda-inertial-delay = <0x0>;
+			xlnx,ten-bit-adr = <0x0>;
+		} ;
+		LEDs_8Bit: gpio@81400000 {
+			compatible = "xlnx,xps-gpio-1.00.a";
+			interrupt-parent = <&xps_intc_0>;
+			interrupts = < 7 2 >;
+			reg = < 0x81400000 0x10000 >;
+			xlnx,all-inputs = <0x0>;
+			xlnx,all-inputs-2 = <0x0>;
+			xlnx,dout-default = <0x0>;
+			xlnx,dout-default-2 = <0x0>;
+			xlnx,family = "virtex5";
+			xlnx,gpio-width = <0x8>;
+			xlnx,interrupt-present = <0x1>;
+			xlnx,is-bidir = <0x1>;
+			xlnx,is-bidir-2 = <0x1>;
+			xlnx,is-dual = <0x0>;
+			xlnx,tri-default = <0xffffffff>;
+			xlnx,tri-default-2 = <0xffffffff>;
+			#gpio-cells = <2>;
+			gpio-controller;
+		} ;
+
+		gpio-leds {
+			compatible = "gpio-leds";
+
+			heartbeat {
+				label = "Heartbeat";
+				gpios = <&LEDs_8Bit 4 1>;
+				linux,default-trigger = "heartbeat";
+			};
+
+			yellow {
+				label = "Yellow";
+				gpios = <&LEDs_8Bit 5 1>;
+			};
+
+			red {
+				label = "Red";
+				gpios = <&LEDs_8Bit 6 1>;
+			};
+
+			green {
+				label = "Green";
+				gpios = <&LEDs_8Bit 7 1>;
+			};
+		} ;
+		RS232_Uart_1: serial@84000000 {
+			clock-frequency = <125000000>;
+			compatible = "xlnx,xps-uartlite-1.00.a";
+			current-speed = <115200>;
+			device_type = "serial";
+			interrupt-parent = <&xps_intc_0>;
+			interrupts = < 8 0 >;
+			port-number = <0>;
+			reg = < 0x84000000 0x10000 >;
+			xlnx,baudrate = <0x1c200>;
+			xlnx,data-bits = <0x8>;
+			xlnx,family = "virtex5";
+			xlnx,odd-parity = <0x0>;
+			xlnx,use-parity = <0x0>;
+		} ;
+		SysACE_CompactFlash: sysace@83600000 {
+			compatible = "xlnx,xps-sysace-1.00.a";
+			interrupt-parent = <&xps_intc_0>;
+			interrupts = < 4 2 >;
+			reg = < 0x83600000 0x10000 >;
+			xlnx,family = "virtex5";
+			xlnx,mem-width = <0x10>;
+		} ;
+		debug_module: debug@84400000 {
+			compatible = "xlnx,mdm-1.00.d";
+			reg = < 0x84400000 0x10000 >;
+			xlnx,family = "virtex5";
+			xlnx,interconnect = <0x1>;
+			xlnx,jtag-chain = <0x2>;
+			xlnx,mb-dbg-ports = <0x1>;
+			xlnx,uart-width = <0x8>;
+			xlnx,use-uart = <0x1>;
+			xlnx,write-fsl-ports = <0x0>;
+		} ;
+		mpmc@90000000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "xlnx,mpmc-4.02.a";
+			ranges ;
+			PIM3: sdma@84600180 {
+				compatible = "xlnx,ll-dma-1.00.a";
+				interrupt-parent = <&xps_intc_0>;
+				interrupts = < 2 2 1 2 >;
+				reg = < 0x84600180 0x80 >;
+			} ;
+		} ;
+		xps_intc_0: interrupt-controller@81800000 {
+			#interrupt-cells = <0x2>;
+			compatible = "xlnx,xps-intc-1.00.a";
+			interrupt-controller ;
+			reg = < 0x81800000 0x10000 >;
+			xlnx,kind-of-intr = <0x100>;
+			xlnx,num-intr-inputs = <0x9>;
+		} ;
+		xps_timer_1: timer@83c00000 {
+			compatible = "xlnx,xps-timer-1.00.a";
+			interrupt-parent = <&xps_intc_0>;
+			interrupts = < 3 2 >;
+			reg = < 0x83c00000 0x10000 >;
+			xlnx,count-width = <0x20>;
+			xlnx,family = "virtex5";
+			xlnx,gen0-assert = <0x1>;
+			xlnx,gen1-assert = <0x1>;
+			xlnx,one-timer-only = <0x0>;
+			xlnx,trig0-assert = <0x1>;
+			xlnx,trig1-assert = <0x1>;
+		} ;
+	} ;
+}  ;
diff --git a/configs/qemu_microblazebe_mmu_defconfig b/configs/qemu_microblazebe_mmu_defconfig
new file mode 100644
index 0000000..378e972
--- /dev/null
+++ b/configs/qemu_microblazebe_mmu_defconfig
@@ -0,0 +1,16 @@ 
+BR2_microblaze=y
+BR2_microblazebe=y
+BR2_TOOLCHAIN_EXTERNAL=y
+BR2_TOOLCHAIN_EXTERNAL_XILINX_MICROBLAZEBE_V2=y
+BR2_TOOLCHAIN_EXTERNAL_DOWNLOAD=y
+BR2_TOOLCHAIN_EXTERNAL_CUSTOM_GLIBC=y
+BR2_TOOLCHAIN_EXTERNAL_CXX=y
+BR2_TARGET_GENERIC_GETTY_PORT="ttyUL0"
+# BR2_TARGET_ROOTFS_TAR is not set
+BR2_TARGET_ROOTFS_INITRAMFS=y
+BR2_LINUX_KERNEL=y
+BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/microblazebe-mmu/kernel-3.3.config"
+BR2_LINUX_KERNEL_DTS_FILE="board/qemu/microblazebe-mmu/system.dts"
+BR2_LINUX_KERNEL_IMAGE_TARGET_CUSTOM=y
+BR2_LINUX_KERNEL_IMAGE_TARGET_NAME="linux.bin"