Patchwork [01/11] manual: rework the whole documentation stub

login
register
mail settings
Submitter Samuel Martin
Date March 20, 2012, 11:09 p.m.
Message ID <1332285001-12881-2-git-send-email-s.martin49@gmail.com>
Download mbox | patch
Permalink /patch/147856/
State Superseded
Headers show

Comments

Samuel Martin - March 20, 2012, 11:09 p.m.
The new skeleton of the manual as it has been thought:
1.  About Buildroot:
     Presentation of Buildroot
2.  Starting up:
     Everything to quickly and easily start working with Buildroot
3.  Working with Buildroot
     Basics to make your work fitting your needs
4.  Troubleshooting
5.  Going further in Buildroot's innards
     Explaination of how buildroot is organised, how it works, etc
6.  Developer Guidelines
7.  Getting involved
8.  Contibuting to Buildroot
9.  Legal notice
10. Appendix

It is easy to distinguish two parts in this plan:
- Sections 1 to 4 mainly address people starting with Buildroot
- Sections 5 to 10 are more focused on how to develop Buildroot itself

Most of the existing sections have just been moved in the hierarchy,
few were split and dispatch in, what i think was the relevant section,
and numerous others have been created.

Signed-off-by: Samuel MARTIN <s.martin49@gmail.com>
---
 docs/manual/adding-packages-autotargets.txt  |    6 +++---
 docs/manual/adding-packages-cmaketargets.txt |    6 +++---
 docs/manual/adding-packages-conclusion.txt   |    2 +-
 docs/manual/adding-packages-directory.txt    |    6 +++---
 docs/manual/adding-packages-gentargets.txt   |    6 +++---
 docs/manual/adding-packages-gettext.txt      |    2 +-
 docs/manual/adding-packages-handwritten.txt  |    4 +---
 docs/manual/adding-packages.txt              |    3 ++-
 docs/manual/advanced.txt                     |   10 ++++++++++
 docs/manual/board-support.txt                |    3 ++-
 docs/manual/ccache-support.txt               |    3 ++-
 docs/manual/common-usage.txt                 |    4 ++++
 docs/manual/contribute.txt                   |    2 ++
 docs/manual/customize-busybox-config.txt     |    6 +++---
 docs/manual/customize-kernel-config.txt      |    3 ++-
 docs/manual/customize-rootfs.txt             |    3 ++-
 docs/manual/customize-toolchain.txt          |   10 +++++-----
 docs/manual/customize-uclibc-config.txt      |    4 ++--
 docs/manual/customize.txt                    |    2 +-
 docs/manual/developer-guide.txt              |    8 ++++++++
 docs/manual/download-location.txt            |    2 +-
 docs/manual/embedded-basics.txt              |    2 ++
 docs/manual/external-toolchain.txt           |    4 ++--
 docs/manual/get-involved.txt                 |    2 ++
 docs/manual/getting.txt                      |    3 ++-
 docs/manual/going-further.txt                |    8 ++++++++
 docs/manual/how-buildroot-works.txt          |    2 +-
 docs/manual/legal-notice.txt                 |    4 ++++
 docs/manual/make-tips.txt                    |    2 ++
 docs/manual/manual.txt                       |   21 +++++++++++----------
 docs/manual/prerequisite.txt                 |    2 ++
 docs/manual/rebuilding-packages.txt          |    2 +-
 docs/manual/starting-up.txt                  |    9 +++++++++
 docs/manual/troubleshooting.txt              |    2 ++
 docs/manual/using-buildroot-toolchain.txt    |    2 +-
 docs/manual/working-with.txt                 |   12 ++++++++++++
 docs/manual/writing-rules.txt                |   11 +++++++++++
 37 files changed, 133 insertions(+), 50 deletions(-)
 create mode 100644 docs/manual/advanced.txt
 create mode 100644 docs/manual/common-usage.txt
 create mode 100644 docs/manual/contribute.txt
 create mode 100644 docs/manual/developer-guide.txt
 create mode 100644 docs/manual/embedded-basics.txt
 create mode 100644 docs/manual/get-involved.txt
 create mode 100644 docs/manual/going-further.txt
 create mode 100644 docs/manual/legal-notice.txt
 create mode 100644 docs/manual/make-tips.txt
 create mode 100644 docs/manual/prerequisite.txt
 create mode 100644 docs/manual/starting-up.txt
 create mode 100644 docs/manual/troubleshooting.txt
 create mode 100644 docs/manual/working-with.txt
 create mode 100644 docs/manual/writing-rules.txt

Patch

diff --git a/docs/manual/adding-packages-autotargets.txt b/docs/manual/adding-packages-autotargets.txt
index 428a182..dcc7a24 100644
--- a/docs/manual/adding-packages-autotargets.txt
+++ b/docs/manual/adding-packages-autotargets.txt
@@ -1,10 +1,10 @@ 
 Infrastructure for autotools-based packages
--------------------------------------------
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 
 [[autotargets-tutorial]]
 
 +AUTOTARGETS+ tutorial
-~~~~~~~~~~~~~~~~~~~~~~
+^^^^^^^^^^^^^^^^^^^^^^
 
 First, let's see how to write a +.mk+ file for an autotools-based
 package, with an example :
@@ -64,7 +64,7 @@  package to be built.
 [[autotargets-reference]]
 
 +AUTOTARGETS+ reference
-~~~~~~~~~~~~~~~~~~~~~~~
+^^^^^^^^^^^^^^^^^^^^^^^
 
 The main macro of the autotools package infrastructure is
 +AUTOTARGETS+. It has the same number of arguments and the
diff --git a/docs/manual/adding-packages-cmaketargets.txt b/docs/manual/adding-packages-cmaketargets.txt
index 3e400ec..a6b2273 100644
--- a/docs/manual/adding-packages-cmaketargets.txt
+++ b/docs/manual/adding-packages-cmaketargets.txt
@@ -1,10 +1,10 @@ 
 Infrastructure for CMake-based packages
----------------------------------------
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 
 [[cmaketargets-tutorial]]
 
 +CMAKETARGETS+ tutorial
-~~~~~~~~~~~~~~~~~~~~~~~
+^^^^^^^^^^^^^^^^^^^^^^^
 
 First, let's see how to write a +.mk+ file for a CMake-based package,
 with an example :
@@ -63,7 +63,7 @@  package to be built.
 [[cmaketargets-reference]]
 
 +CMAKETARGETS+ reference
-~~~~~~~~~~~~~~~~~~~~~~~~
+^^^^^^^^^^^^^^^^^^^^^^^^
 
 The main macro of the CMake package infrastructure is
 +CMAKETARGETS+. It has the same number of arguments and the same
diff --git a/docs/manual/adding-packages-conclusion.txt b/docs/manual/adding-packages-conclusion.txt
index 3475827..d03dc4e 100644
--- a/docs/manual/adding-packages-conclusion.txt
+++ b/docs/manual/adding-packages-conclusion.txt
@@ -1,5 +1,5 @@ 
 Conclusion
-----------
+~~~~~~~~~~
 
 As you can see, adding a software package to Buildroot is simply a
 matter of writing a Makefile using an  existing example and modifying it
diff --git a/docs/manual/adding-packages-directory.txt b/docs/manual/adding-packages-directory.txt
index 2670f2f..1428f37 100644
--- a/docs/manual/adding-packages-directory.txt
+++ b/docs/manual/adding-packages-directory.txt
@@ -1,5 +1,5 @@ 
 Package directory
------------------
+~~~~~~~~~~~~~~~~~
 
 First of all, create a directory under the +package+ directory for
 your software, for example +libfoo+.
@@ -10,7 +10,7 @@  one of these categories, then create your package directory in these.
 
 
 +Config.in+ file
-~~~~~~~~~~~~~~~~
+^^^^^^^^^^^^^^^^
 
 Then, create a file named +Config.in+. This file will contain the
 option descriptions related to our +libfoo+ software that will be used
@@ -146,7 +146,7 @@  so, the dependency also needs to be expressed in the +.mk+ file of the
 package.
 
 The +.mk+ file
-~~~~~~~~~~~~~~
+^^^^^^^^^^^^^^
 
 Finally, here's the hardest part. Create a file named +libfoo.mk+. It
 describes how the package should be downloaded, configured, built,
diff --git a/docs/manual/adding-packages-gentargets.txt b/docs/manual/adding-packages-gentargets.txt
index cfcee8c..c0ad89d 100644
--- a/docs/manual/adding-packages-gentargets.txt
+++ b/docs/manual/adding-packages-gentargets.txt
@@ -1,5 +1,5 @@ 
 Infrastructure for packages with specific build systems
--------------------------------------------------------
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 
 By 'packages with specific build systems' we mean all the packages
 whose build system is not one of the standard ones, such as
@@ -9,7 +9,7 @@  system is based on hand-written Makefiles or shell scripts.
 [[gentargets-tutorial]]
 
 +GENTARGETS+ Tutorial
-~~~~~~~~~~~~~~~~~~~~~
+^^^^^^^^^^^^^^^^^^^^^
 
 ------------------------------
 01: #############################################################
@@ -90,7 +90,7 @@  Makefile code necessary to make your package working.
 [[gentargets-reference]]
 
 +GENTARGETS+ Reference
-~~~~~~~~~~~~~~~~~~~~~~
+^^^^^^^^^^^^^^^^^^^^^^
 
 The +GENTARGETS+ macro takes one optional argument. This argument can
 be used to tell if the package is a target package (cross-compiled for
diff --git a/docs/manual/adding-packages-gettext.txt b/docs/manual/adding-packages-gettext.txt
index 1ed834e..7eced86 100644
--- a/docs/manual/adding-packages-gettext.txt
+++ b/docs/manual/adding-packages-gettext.txt
@@ -1,5 +1,5 @@ 
 Gettext integration and interaction with packages
--------------------------------------------------
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 
 Many packages that support internationalization use the gettext
 library. Dependencies for this library are fairly complicated and
diff --git a/docs/manual/adding-packages-handwritten.txt b/docs/manual/adding-packages-handwritten.txt
index beb25f6..25fa93c 100644
--- a/docs/manual/adding-packages-handwritten.txt
+++ b/docs/manual/adding-packages-handwritten.txt
@@ -1,7 +1,5 @@ 
-[[handwritten-tutorial]]
-
 Manual Makefile
----------------
+~~~~~~~~~~~~~~~
 
 *NOTE: new manual makefiles should not be created, and existing manual
 makefiles should be converted either to the generic, autotools or
diff --git a/docs/manual/adding-packages.txt b/docs/manual/adding-packages.txt
index 0217e9f..91649d4 100644
--- a/docs/manual/adding-packages.txt
+++ b/docs/manual/adding-packages.txt
@@ -1,5 +1,6 @@ 
+[[adding-packages]]
 Adding new packages to Buildroot
-================================
+--------------------------------
 
 This section covers how new packages (userspace libraries or
 applications) can be integrated into Buildroot. It also shows how
diff --git a/docs/manual/advanced.txt b/docs/manual/advanced.txt
new file mode 100644
index 0000000..f433c13
--- /dev/null
+++ b/docs/manual/advanced.txt
@@ -0,0 +1,10 @@ 
+Advanced usage
+--------------
+
+include::using-buildroot-toolchain.txt[]
+
+include::external-toolchain.txt[]
+
+include::ccache-support.txt[]
+
+include::download-location.txt[]
diff --git a/docs/manual/board-support.txt b/docs/manual/board-support.txt
index d1d9d63..e8142ab 100644
--- a/docs/manual/board-support.txt
+++ b/docs/manual/board-support.txt
@@ -1,5 +1,6 @@ 
+[[board-support]]
 Creating your own board support
-===============================
+-------------------------------
 
 Creating your own board support in Buildroot allows users of a
 particular hardware platform to easily build a system that is known to
diff --git a/docs/manual/ccache-support.txt b/docs/manual/ccache-support.txt
index ab8cbad..37a9f92 100644
--- a/docs/manual/ccache-support.txt
+++ b/docs/manual/ccache-support.txt
@@ -1,5 +1,6 @@ 
+[[ccache]]
 Using +ccache+ in Buildroot
-===========================
+~~~~~~~~~~~~~~~~~~~~~~~~~~~
 
 http://ccache.samba.org[ccache] is a compiler cache. It stores the
 object files resulting from each compilation process, and is able to
diff --git a/docs/manual/common-usage.txt b/docs/manual/common-usage.txt
new file mode 100644
index 0000000..ff8543f
--- /dev/null
+++ b/docs/manual/common-usage.txt
@@ -0,0 +1,4 @@ 
+Daily use
+---------
+
+include::rebuilding-packages.txt[]
diff --git a/docs/manual/contribute.txt b/docs/manual/contribute.txt
new file mode 100644
index 0000000..30ae800
--- /dev/null
+++ b/docs/manual/contribute.txt
@@ -0,0 +1,2 @@ 
+Contibuting to Buildroot
+========================
diff --git a/docs/manual/customize-busybox-config.txt b/docs/manual/customize-busybox-config.txt
index 60e6a55..880fe3a 100644
--- a/docs/manual/customize-busybox-config.txt
+++ b/docs/manual/customize-busybox-config.txt
@@ -1,6 +1,6 @@ 
-Customizing the Busybox configuration
--------------------------------------
 [[busybox-custom]]
+Customizing the Busybox configuration
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 
 http://www.busybox.net/[Busybox] is very configurable, and you may
 want to customize it. You can follow these simple steps to do so. This
@@ -20,5 +20,5 @@  Otherwise, you can simply change the
 options you want to change, without using the configuration tool.
 
 If you want to use an existing config file for busybox, then see
-section xref:env-vars[].
+xref:env-vars[].
 
diff --git a/docs/manual/customize-kernel-config.txt b/docs/manual/customize-kernel-config.txt
index 6bafe46..93470be 100644
--- a/docs/manual/customize-kernel-config.txt
+++ b/docs/manual/customize-kernel-config.txt
@@ -1,5 +1,6 @@ 
+[[kernel-custom]]
 Customizing the Linux kernel configuration
-------------------------------------------
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 
 The Linux kernel configuration can be customized just like
 xref:busybox-custom[BusyBox] and xref:uclibc-custom[uClibc] using
diff --git a/docs/manual/customize-rootfs.txt b/docs/manual/customize-rootfs.txt
index 8c3ea82..123c97f 100644
--- a/docs/manual/customize-rootfs.txt
+++ b/docs/manual/customize-rootfs.txt
@@ -1,5 +1,6 @@ 
+[[rootfs-custom]]
 Customizing the generated target filesystem
--------------------------------------------
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 
 There are a few ways to customize the resulting target filesystem:
 
diff --git a/docs/manual/customize-toolchain.txt b/docs/manual/customize-toolchain.txt
index 08b60a2..b4ac4a4 100644
--- a/docs/manual/customize-toolchain.txt
+++ b/docs/manual/customize-toolchain.txt
@@ -1,12 +1,12 @@ 
-Customizing the toolchain
--------------------------
 [[toolchain-custom]]
+Customizing the toolchain
+~~~~~~~~~~~~~~~~~~~~~~~~~
 
 There are three distinct types of toolchain backend supported in Buildroot,
 available under the menu +Toolchain+, invoking +make menuconfig+.
 
 Using the external toolchain backend
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
 
 There is no way of tuning an external toolchain since Buildroot does not
 generate it.
@@ -15,7 +15,7 @@  It also requires to set the Buildroot settings according to the toolchain ones
 (see xref:external-toolchain[]).
 
 Using the internal Buildroot toolchain backend
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
 
 The internal Buildroot toolchain backend *only* allows to generate
 *http://www.uclibc.org/[uClibc]-based toolchains*.
@@ -32,7 +32,7 @@  This is directly available after selecting the +Buildroot toolchain+ type in
 the menu +Toolchain+.
 
 Using the Crosstool-NG backend
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
 
 The http://crosstool-ng.org[crosstool-NG] toolchain backend enables a rather
 limited set of settings under the Buildroot +Toolchain+ menu (ie. when invoking
diff --git a/docs/manual/customize-uclibc-config.txt b/docs/manual/customize-uclibc-config.txt
index e2e6799..6db4e41 100644
--- a/docs/manual/customize-uclibc-config.txt
+++ b/docs/manual/customize-uclibc-config.txt
@@ -1,6 +1,6 @@ 
-Customizing the uClibc configuration
-------------------------------------
 [[uclibc-custom]]
+Customizing the uClibc configuration
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 
 Just like xref:busybox-custom[BusyBox], http://www.uclibc.org/[uClibc]
 offers a lot of configuration options. They allow you to select
diff --git a/docs/manual/customize.txt b/docs/manual/customize.txt
index e8235de..8778fdd 100644
--- a/docs/manual/customize.txt
+++ b/docs/manual/customize.txt
@@ -1,5 +1,5 @@ 
 Customization
-=============
+-------------
 
 include::customize-rootfs.txt[]
 
diff --git a/docs/manual/developer-guide.txt b/docs/manual/developer-guide.txt
new file mode 100644
index 0000000..14589c2
--- /dev/null
+++ b/docs/manual/developer-guide.txt
@@ -0,0 +1,8 @@ 
+Developer Guidelines
+====================
+
+include::writing-rules.txt[]
+
+include::adding-packages.txt[]
+
+include::board-support.txt[]
diff --git a/docs/manual/download-location.txt b/docs/manual/download-location.txt
index cb6147f..7ac98c0 100644
--- a/docs/manual/download-location.txt
+++ b/docs/manual/download-location.txt
@@ -1,5 +1,5 @@ 
 Location of downloaded packages
-===============================
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 
 It might be useful to know that the various tarballs that are
 downloaded by the Makefiles are all stored in the +DL_DIR+ which by
diff --git a/docs/manual/embedded-basics.txt b/docs/manual/embedded-basics.txt
new file mode 100644
index 0000000..e1c66e3
--- /dev/null
+++ b/docs/manual/embedded-basics.txt
@@ -0,0 +1,2 @@ 
+Embedded system basics & Reasons to use Buildroot
+-------------------------------------------------
diff --git a/docs/manual/external-toolchain.txt b/docs/manual/external-toolchain.txt
index 62eb0a3..30efe42 100644
--- a/docs/manual/external-toolchain.txt
+++ b/docs/manual/external-toolchain.txt
@@ -1,6 +1,6 @@ 
-Using an external toolchain
-===========================
 [[external-toolchain]]
+Using an external toolchain
+~~~~~~~~~~~~~~~~~~~~~~~~~~~
 
 Using an already existing toolchain is useful for different
 reasons:
diff --git a/docs/manual/get-involved.txt b/docs/manual/get-involved.txt
new file mode 100644
index 0000000..df3b055
--- /dev/null
+++ b/docs/manual/get-involved.txt
@@ -0,0 +1,2 @@ 
+Getting involved
+================
diff --git a/docs/manual/getting.txt b/docs/manual/getting.txt
index 42ca009..6cfdefb 100644
--- a/docs/manual/getting.txt
+++ b/docs/manual/getting.txt
@@ -1,5 +1,6 @@ 
+[[getting-buildroot]]
 Getting Buildroot
-=================
+-----------------
 
 Buildroot releases are made approximately every 3 months. Direct Git
 access and daily snapshots are also available, if you want more
diff --git a/docs/manual/going-further.txt b/docs/manual/going-further.txt
new file mode 100644
index 0000000..67162a6
--- /dev/null
+++ b/docs/manual/going-further.txt
@@ -0,0 +1,8 @@ 
+Going further in Buildroot's innards
+====================================
+
+include::embedded-basics.txt[]
+
+include::how-buildroot-works.txt[]
+
+include::advanced.txt[]
diff --git a/docs/manual/how-buildroot-works.txt b/docs/manual/how-buildroot-works.txt
index 481e5a4..1e86ca3 100644
--- a/docs/manual/how-buildroot-works.txt
+++ b/docs/manual/how-buildroot-works.txt
@@ -1,5 +1,5 @@ 
 How Buildroot works
-===================
+-------------------
 
 As mentioned above, Buildroot is basically a set of Makefiles that
 download, configure, and compile software with the correct options. It
diff --git a/docs/manual/legal-notice.txt b/docs/manual/legal-notice.txt
new file mode 100644
index 0000000..3d741a9
--- /dev/null
+++ b/docs/manual/legal-notice.txt
@@ -0,0 +1,4 @@ 
+Legal notice
+============
+
+TODO
diff --git a/docs/manual/make-tips.txt b/docs/manual/make-tips.txt
new file mode 100644
index 0000000..646efdf
--- /dev/null
+++ b/docs/manual/make-tips.txt
@@ -0,0 +1,2 @@ 
+'make' tips
+-----------
diff --git a/docs/manual/manual.txt b/docs/manual/manual.txt
index 732b50c..3e7a7ef 100644
--- a/docs/manual/manual.txt
+++ b/docs/manual/manual.txt
@@ -11,24 +11,25 @@  image::logo.png[]
 
 include::introduction.txt[]
 
-include::getting.txt[]
+include::starting-up.txt[]
 
-include::using.txt[]
 
-include::customize.txt[]
 
-include::rebuilding-packages.txt[]
+include::working-with.txt[]
 
-include::how-buildroot-works.txt[]
+include::troubleshooting.txt[]
 
-include::using-buildroot-toolchain.txt[]
 
-include::external-toolchain.txt[]
 
-include::ccache-support.txt[]
+include::going-further.txt[]
 
-include::download-location.txt[]
+include::developer-guide.txt[]
+
+include::get-involved.txt[]
+
+include::contribute.txt[]
+
+include::legal-notice.txt[]
 
-include::adding-packages.txt[]
 
 include::appendix.txt[]
diff --git a/docs/manual/prerequisite.txt b/docs/manual/prerequisite.txt
new file mode 100644
index 0000000..f50672b
--- /dev/null
+++ b/docs/manual/prerequisite.txt
@@ -0,0 +1,2 @@ 
+System requirements
+-------------------
diff --git a/docs/manual/rebuilding-packages.txt b/docs/manual/rebuilding-packages.txt
index 9a41a88..6e4ee2f 100644
--- a/docs/manual/rebuilding-packages.txt
+++ b/docs/manual/rebuilding-packages.txt
@@ -1,5 +1,5 @@ 
 Understanding how to rebuild packages
-=====================================
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 
 One of the most common questions asked by Buildroot users is how to
 rebuild a given package or how to remove a package without rebuilding
diff --git a/docs/manual/starting-up.txt b/docs/manual/starting-up.txt
new file mode 100644
index 0000000..3a74ea6
--- /dev/null
+++ b/docs/manual/starting-up.txt
@@ -0,0 +1,9 @@ 
+Starting up
+===========
+
+include::prerequisite.txt[]
+
+include::getting.txt[]
+
+include::using.txt[]
+
diff --git a/docs/manual/troubleshooting.txt b/docs/manual/troubleshooting.txt
new file mode 100644
index 0000000..4eddddd
--- /dev/null
+++ b/docs/manual/troubleshooting.txt
@@ -0,0 +1,2 @@ 
+Troubleshooting
+===============
diff --git a/docs/manual/using-buildroot-toolchain.txt b/docs/manual/using-buildroot-toolchain.txt
index 712e9a8..24e797f 100644
--- a/docs/manual/using-buildroot-toolchain.txt
+++ b/docs/manual/using-buildroot-toolchain.txt
@@ -1,5 +1,5 @@ 
 Using the generated toolchain outside Buildroot
-===============================================
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 
 You may want to compile, for your target, your own programs or other
 software that are not packaged in Buildroot. In order to do this you
diff --git a/docs/manual/working-with.txt b/docs/manual/working-with.txt
new file mode 100644
index 0000000..01f1041
--- /dev/null
+++ b/docs/manual/working-with.txt
@@ -0,0 +1,12 @@ 
+Working with Buildroot
+======================
+[[working-with-br]]
+
+include::make-tips.txt[]
+
+include::customize.txt[]
+
+include::common-usage.txt[]
+
+Tweaking Buildroot
+------------------
diff --git a/docs/manual/writing-rules.txt b/docs/manual/writing-rules.txt
new file mode 100644
index 0000000..284cee2
--- /dev/null
+++ b/docs/manual/writing-rules.txt
@@ -0,0 +1,11 @@ 
+Writing rules
+-------------
+
++Config.in+ file
+~~~~~~~~~~~~~~~~
+
+The +.mk+ file
+~~~~~~~~~~~~~~
+
+The documentation
+~~~~~~~~~~~~~~~~~