diff mbox

[net-next,19/34] sc92031: stop using net_device.{base_addr, irq}

Message ID ad0c2d0b63aea5748f5b335c6348e27d0ca6bd0e.1331814082.git.romieu@fr.zoreil.com
State Changes Requested, archived
Delegated to: David Miller
Headers show

Commit Message

Francois Romieu March 15, 2012, 1:57 p.m. UTC 
Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
---
 drivers/net/ethernet/silan/sc92031.c |   35 ++++++++++-----------------------
 1 files changed, 11 insertions(+), 24 deletions(-)
diff mbox

Patch

diff --git a/drivers/net/ethernet/silan/sc92031.c b/drivers/net/ethernet/silan/sc92031.c
index a284d64..da3df6b 100644
--- a/drivers/net/ethernet/silan/sc92031.c
+++ b/drivers/net/ethernet/silan/sc92031.c
@@ -39,9 +39,7 @@ 
 #define SC92031_NAME "sc92031"
 
 /* BAR 0 is MMIO, BAR 1 is PIO */
-#ifndef SC92031_USE_BAR
-#define SC92031_USE_BAR 0
-#endif
+#define SC92031_USE_PIO	0
 
 /* Maximum number of multicast addresses to filter (vs. Rx-all-multicast). */
 static int multicast_filter_limit = 64;
@@ -366,7 +364,7 @@  static void sc92031_disable_interrupts(struct net_device *dev)
 	mmiowb();
 
 	/* wait for any concurrent interrupt/tasklet to finish */
-	synchronize_irq(dev->irq);
+	synchronize_irq(priv->pdev->irq);
 	tasklet_disable(&priv->tasklet);
 }
 
@@ -1114,10 +1112,13 @@  static void sc92031_tx_timeout(struct net_device *dev)
 #ifdef CONFIG_NET_POLL_CONTROLLER
 static void sc92031_poll_controller(struct net_device *dev)
 {
-	disable_irq(dev->irq);
-	if (sc92031_interrupt(dev->irq, dev) != IRQ_NONE)
+	struct sc92031_priv *priv = netdev_priv(dev);
+	const int irq = priv->pdev->irq;
+
+	disable_irq(irq);
+	if (sc92031_interrupt(irq, dev) != IRQ_NONE)
 		sc92031_tasklet((unsigned long)dev);
-	enable_irq(dev->irq);
+	enable_irq(irq);
 }
 #endif
 
@@ -1402,7 +1403,6 @@  static int __devinit sc92031_probe(struct pci_dev *pdev,
 	struct net_device *dev;
 	struct sc92031_priv *priv;
 	u32 mac0, mac1;
-	unsigned long base_addr;
 
 	err = pci_enable_device(pdev);
 	if (unlikely(err < 0))
@@ -1422,7 +1422,7 @@  static int __devinit sc92031_probe(struct pci_dev *pdev,
 	if (unlikely(err < 0))
 		goto out_request_regions;
 
-	port_base = pci_iomap(pdev, SC92031_USE_BAR, 0);
+	port_base = pci_iomap(pdev, SC92031_USE_PIO, 0);
 	if (unlikely(!port_base)) {
 		err = -EIO;
 		goto out_iomap;
@@ -1437,14 +1437,6 @@  static int __devinit sc92031_probe(struct pci_dev *pdev,
 	pci_set_drvdata(pdev, dev);
 	SET_NETDEV_DEV(dev, &pdev->dev);
 
-#if SC92031_USE_BAR == 0
-	dev->mem_start = pci_resource_start(pdev, SC92031_USE_BAR);
-	dev->mem_end = pci_resource_end(pdev, SC92031_USE_BAR);
-#elif SC92031_USE_BAR == 1
-	dev->base_addr = pci_resource_start(pdev, SC92031_USE_BAR);
-#endif
-	dev->irq = pdev->irq;
-
 	/* faked with skb_copy_and_csum_dev */
 	dev->features = NETIF_F_SG | NETIF_F_HIGHDMA |
 		NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM;
@@ -1478,13 +1470,8 @@  static int __devinit sc92031_probe(struct pci_dev *pdev,
 	if (err < 0)
 		goto out_register_netdev;
 
-#if SC92031_USE_BAR == 0
-	base_addr = dev->mem_start;
-#elif SC92031_USE_BAR == 1
-	base_addr = dev->base_addr;
-#endif
-	printk(KERN_INFO "%s: SC92031 at 0x%lx, %pM, IRQ %d\n", dev->name,
-			base_addr, dev->dev_addr, dev->irq);
+	printk(KERN_INFO "%s: SC92031 at 0x%p, %pM, IRQ %d\n", dev->name,
+	       port_base, dev->dev_addr, pdev->irq);
 
 	return 0;