@@ -23,6 +23,7 @@ config BLUESTONE
default n
select PPC44x_SIMPLE
select APM821xx
+ select PPC4xx_PCI_EXPRESS
select IBM_EMAC_RGMII
help
This option enables support for the APM APM821xx Evaluation board.
@@ -1050,6 +1050,74 @@ static struct ppc4xx_pciex_hwops ppc460ex_pcie_hwops __initdata =
.check_link = ppc4xx_pciex_check_link_sdr,
};
+static int __init apm821xx_pciex_core_init(struct device_node *np)
+{
+ /* Return the number of pcie port */
+ return 1;
+}
+
+static int apm821xx_pciex_init_port_hw(struct ppc4xx_pciex_port *port)
+{
+ u32 val;
+
+ /*
+ * Do a software reset on PCIe ports.
+ * This code is to fix the issue that pci drivers doesn't re-assign
+ * bus number for PCIE devices after Uboot
+ * scanned and configured all the buses (eg. PCIE NIC IntelPro/1000
+ * PT quad port, SAS LSI 1064E)
+ */
+
+ mtdcri(SDR0, PESDR0_460EX_PHY_CTL_RST, 0x0);
+ mdelay(10);
+
+ if (port->endpoint)
+ val = PTYPE_LEGACY_ENDPOINT << 20;
+ else
+ val = PTYPE_ROOT_PORT << 20;
+
+ val |= LNKW_X1 << 12;
+
+ mtdcri(SDR0, port->sdr_base + PESDRn_DLPSET, val);
+ mtdcri(SDR0, port->sdr_base + PESDRn_UTLSET1, 0x00000000);
+ mtdcri(SDR0, port->sdr_base + PESDRn_UTLSET2, 0x01010000);
+
+ mtdcri(SDR0, PESDR0_460EX_L0CDRCTL, 0x00003230);
+ mtdcri(SDR0, PESDR0_460EX_L0DRV, 0x00000130);
+ mtdcri(SDR0, PESDR0_460EX_L0CLK, 0x00000006);
+
+ mtdcri(SDR0, PESDR0_460EX_PHY_CTL_RST, 0x10000000);
+ mdelay(50);
+ mtdcri(SDR0, PESDR0_460EX_PHY_CTL_RST, 0x30000000);
+
+ mtdcri(SDR0, port->sdr_base + PESDRn_RCSSET,
+ mfdcri(SDR0, port->sdr_base + PESDRn_RCSSET) |
+ (PESDRx_RCSSET_RSTGU | PESDRx_RCSSET_RSTPYN));
+
+ /* Poll for PHY reset */
+ val = PESDR0_460EX_RSTSTA - port->sdr_base;
+ if (ppc4xx_pciex_wait_on_sdr(port, val, 0x1, 1, 100)) {
+ printk(KERN_WARNING "PCIE: Can't reset PHY\n");
+ return -EBUSY;
+ } else {
+ mtdcri(SDR0, port->sdr_base + PESDRn_RCSSET,
+ (mfdcri(SDR0, port->sdr_base + PESDRn_RCSSET) &
+ ~(PESDRx_RCSSET_RSTGU | PESDRx_RCSSET_RSTDL)) |
+ PESDRx_RCSSET_RSTPYN);
+
+ port->has_ibpre = 1;
+ return 0;
+ }
+}
+
+static struct ppc4xx_pciex_hwops apm821xx_pcie_hwops __initdata = {
+ .want_sdr = true,
+ .core_init = apm821xx_pciex_core_init,
+ .port_init_hw = apm821xx_pciex_init_port_hw,
+ .setup_utl = ppc460ex_pciex_init_utl,
+ .check_link = ppc4xx_pciex_check_link_sdr,
+};
+
static int __init ppc460sx_pciex_core_init(struct device_node *np)
{
/* HSS drive amplitude */
@@ -1362,6 +1430,8 @@ static int __init ppc4xx_pciex_check_core_init(struct device_node *np)
ppc4xx_pciex_hwops = &ppc460ex_pcie_hwops;
if (of_device_is_compatible(np, "ibm,plb-pciex-460sx"))
ppc4xx_pciex_hwops = &ppc460sx_pcie_hwops;
+ if (of_device_is_compatible(np, "ibm,plb-pciex-apm821xx"))
+ ppc4xx_pciex_hwops = &apm821xx_pcie_hwops;
#endif /* CONFIG_44x */
#ifdef CONFIG_40x
if (of_device_is_compatible(np, "ibm,plb-pciex-405ex"))
This patch extends PCI-E driver to support PCI-E for APM821xx SoC on Bluestone board. Notes: this patch includes the fix base on Duc comment. Signed-off-by: Vinh Nguyen Huu Tuong <vhtnguyen@apm.com> --- arch/powerpc/platforms/44x/Kconfig | 1 + arch/powerpc/sysdev/ppc4xx_pci.c | 70 ++++++++++++++++++++++++++++++++++++ 2 files changed, 71 insertions(+), 0 deletions(-)