Patchwork [GIT,PULL] ARM: OMAP: i2c, gpio, spi, regulator and mmc DTS updates

login
register
mail settings
Submitter Cousson, Benoit
Date March 14, 2012, 11:39 p.m.
Message ID <4F612C29.40608@ti.com>
Download mbox
Permalink /patch/146784/
State New
Headers show

Pull-request

git://git.kernel.org/pub/scm/linux/kernel/git/bcousson/linux-omap-dt.git for_3.4/dts/all

Comments

Cousson, Benoit - March 14, 2012, 11:39 p.m.
Hi Tony,

Here are the remaining DTS patches for 3.4.

On top of the previous pull request, I just added the MMC DTS since the driver adaptation just got queued.

It will be still be good to have that for 3.4 if possible, otherwise we will have a bunch of drivers DT adapted but no DTS file to use them :-(

This series is based on your lo/dt-part2 branch.

Thanks,
Benoit


The following changes since commit 328ae2cb50af2f96b6061eb462aa92966a462bbc:
  Ilya Yanok (1):
        arm/dts: mt_ventoux: very basic support for TeeJet Mt.Ventoux board

are available in the git repository at:

  git://git.kernel.org/pub/scm/linux/kernel/git/bcousson/linux-omap-dt.git for_3.4/dts/all

Benoit Cousson (11):
      arm/dts: twl6030: Add DTS file for twl6030 PMIC
      arm/dts: twl4030: Add DTS file for twl4030 PM + Audio IC
      arm/dts: omap4-panda: Add twl6030 and i2c EEPROM
      arm/dts: omap4-sdp: Add twl6030, i2c3 and i2c4 devices
      arm/dts: omap3-beagle: Add twl4030 and i2c EEPROM
      ARM: OMAP2+: board-generic: Remove i2c static init
      arm/dts: OMAP4: Add gpio nodes
      arm/dts: OMAP3: Add gpio nodes
      arm/dts: OMAP4: Add SPI controller nodes
      arm/dts: OMAP3: Add SPI controller nodes
      arm/dts: omap4-sdp: Add ks8851 ethernet SPI device

Rajendra Nayak (3):
      arm/dts: twl: Pass regulator data from dt
      arm/dts: OMAP4: Add mmc controller nodes and board data
      arm/dts: OMAP3: Add mmc controller nodes and board data

 arch/arm/boot/dts/omap3-beagle.dts  |   49 +++++++++++++++
 arch/arm/boot/dts/omap3.dtsi        |  102 ++++++++++++++++++++++++++++++
 arch/arm/boot/dts/omap4-panda.dts   |   56 +++++++++++++++++
 arch/arm/boot/dts/omap4-sdp.dts     |   97 +++++++++++++++++++++++++++++
 arch/arm/boot/dts/omap4.dtsi        |  117 +++++++++++++++++++++++++++++++++++
 arch/arm/boot/dts/twl4030.dtsi      |   39 ++++++++++++
 arch/arm/boot/dts/twl6030.dtsi      |   86 +++++++++++++++++++++++++
 arch/arm/mach-omap2/board-generic.c |   37 +----------
 arch/arm/mach-omap2/devices.c       |    4 +-
 arch/arm/mach-omap2/gpio.c          |    8 ++-
 10 files changed, 557 insertions(+), 38 deletions(-)
 create mode 100644 arch/arm/boot/dts/twl4030.dtsi
 create mode 100644 arch/arm/boot/dts/twl6030.dtsi
Tony Lindgren - March 15, 2012, 12:46 a.m.
Hi,

* Cousson, Benoit <b-cousson@ti.com> [120314 16:41]:
> Hi Tony,
> 
> Here are the remaining DTS patches for 3.4.
> 
> On top of the previous pull request, I just added the MMC DTS since the driver adaptation just got queued.
> 
> It will be still be good to have that for 3.4 if possible, otherwise we will have a bunch of drivers DT adapted but no DTS file to use them :-(

This might be doable as a follow-up patch series at the end
of the merge window or at -rc1 when the related driver changes
have been merged.

Arnd and Olof, what do you guys think?

Regards,

Tony

 
> This series is based on your lo/dt-part2 branch.
> 
> Thanks,
> Benoit
> 
> 
> The following changes since commit 328ae2cb50af2f96b6061eb462aa92966a462bbc:
>   Ilya Yanok (1):
>         arm/dts: mt_ventoux: very basic support for TeeJet Mt.Ventoux board
> 
> are available in the git repository at:
> 
>   git://git.kernel.org/pub/scm/linux/kernel/git/bcousson/linux-omap-dt.git for_3.4/dts/all
> 
> Benoit Cousson (11):
>       arm/dts: twl6030: Add DTS file for twl6030 PMIC
>       arm/dts: twl4030: Add DTS file for twl4030 PM + Audio IC
>       arm/dts: omap4-panda: Add twl6030 and i2c EEPROM
>       arm/dts: omap4-sdp: Add twl6030, i2c3 and i2c4 devices
>       arm/dts: omap3-beagle: Add twl4030 and i2c EEPROM
>       ARM: OMAP2+: board-generic: Remove i2c static init
>       arm/dts: OMAP4: Add gpio nodes
>       arm/dts: OMAP3: Add gpio nodes
>       arm/dts: OMAP4: Add SPI controller nodes
>       arm/dts: OMAP3: Add SPI controller nodes
>       arm/dts: omap4-sdp: Add ks8851 ethernet SPI device
> 
> Rajendra Nayak (3):
>       arm/dts: twl: Pass regulator data from dt
>       arm/dts: OMAP4: Add mmc controller nodes and board data
>       arm/dts: OMAP3: Add mmc controller nodes and board data
> 
>  arch/arm/boot/dts/omap3-beagle.dts  |   49 +++++++++++++++
>  arch/arm/boot/dts/omap3.dtsi        |  102 ++++++++++++++++++++++++++++++
>  arch/arm/boot/dts/omap4-panda.dts   |   56 +++++++++++++++++
>  arch/arm/boot/dts/omap4-sdp.dts     |   97 +++++++++++++++++++++++++++++
>  arch/arm/boot/dts/omap4.dtsi        |  117 +++++++++++++++++++++++++++++++++++
>  arch/arm/boot/dts/twl4030.dtsi      |   39 ++++++++++++
>  arch/arm/boot/dts/twl6030.dtsi      |   86 +++++++++++++++++++++++++
>  arch/arm/mach-omap2/board-generic.c |   37 +----------
>  arch/arm/mach-omap2/devices.c       |    4 +-
>  arch/arm/mach-omap2/gpio.c          |    8 ++-
>  10 files changed, 557 insertions(+), 38 deletions(-)
>  create mode 100644 arch/arm/boot/dts/twl4030.dtsi
>  create mode 100644 arch/arm/boot/dts/twl6030.dtsi
>
Arnd Bergmann - March 15, 2012, 8:01 a.m.
On Thursday 15 March 2012, Tony Lindgren wrote:
> * Cousson, Benoit <b-cousson@ti.com> [120314 16:41]:
> > Hi Tony,
> > 
> > Here are the remaining DTS patches for 3.4.
> > 
> > On top of the previous pull request, I just added the MMC DTS since the driver adaptation just got queued.
> > 
> > It will be still be good to have that for 3.4 if possible, otherwise we will
> > have a bunch of drivers DT adapted but no DTS file to use them :-(
> 
> This might be doable as a follow-up patch series at the end
> of the merge window or at -rc1 when the related driver changes
> have been merged.
> 
> Arnd and Olof, what do you guys think?

I'll have to look at the patches more closely, but from the diffstat it definitely
looks ok for a later merge once the driver is in. If you can rebase the branch on
top of the mmc tree (or the merge of that tree with whatever else is needed), it
should give us a bisectable history and I can stick it into a late/* branch right
away.

	Arnd
Cousson, Benoit - March 29, 2012, 2:08 p.m.
Hi Arnd and Olof,

On 3/15/2012 9:01 AM, Arnd Bergmann wrote:
> On Thursday 15 March 2012, Tony Lindgren wrote:
>> * Cousson, Benoit<b-cousson@ti.com>  [120314 16:41]:
>>> Hi Tony,
>>>
>>> Here are the remaining DTS patches for 3.4.
>>>
>>> On top of the previous pull request, I just added the MMC DTS since the driver adaptation just got queued.
>>>
>>> It will be still be good to have that for 3.4 if possible, otherwise we will
>>> have a bunch of drivers DT adapted but no DTS file to use them :-(
>>
>> This might be doable as a follow-up patch series at the end
>> of the merge window or at -rc1 when the related driver changes
>> have been merged.
>>
>> Arnd and Olof, what do you guys think?
>
> I'll have to look at the patches more closely, but from the diffstat it definitely
> looks ok for a later merge once the driver is in. If you can rebase the branch on
> top of the mmc tree (or the merge of that tree with whatever else is needed), it
> should give us a bisectable history and I can stick it into a late/* branch right
> away.

FYI, MMC DT adaptation just got merged, I2C, GPIO, SPI, regulator DT 
adaptation were already merged before, so it means that this branch can 
be merged to take advantage of all the DT adapted drivers.

Thanks,
Benoit
Olof Johansson - March 29, 2012, 6:31 p.m.
On Thu, Mar 29, 2012 at 7:08 AM, Cousson, Benoit <b-cousson@ti.com> wrote:
> Hi Arnd and Olof,
>
>
> On 3/15/2012 9:01 AM, Arnd Bergmann wrote:
>>
>> On Thursday 15 March 2012, Tony Lindgren wrote:
>>>
>>> * Cousson, Benoit<b-cousson@ti.com>  [120314 16:41]:
>>>>
>>>> Hi Tony,
>>>>
>>>> Here are the remaining DTS patches for 3.4.
>>>>
>>>> On top of the previous pull request, I just added the MMC DTS since the
>>>> driver adaptation just got queued.
>>>>
>>>> It will be still be good to have that for 3.4 if possible, otherwise we
>>>> will
>>>> have a bunch of drivers DT adapted but no DTS file to use them :-(
>>>
>>>
>>> This might be doable as a follow-up patch series at the end
>>> of the merge window or at -rc1 when the related driver changes
>>> have been merged.
>>>
>>> Arnd and Olof, what do you guys think?
>>
>>
>> I'll have to look at the patches more closely, but from the diffstat it
>> definitely
>> looks ok for a later merge once the driver is in. If you can rebase the
>> branch on
>> top of the mmc tree (or the merge of that tree with whatever else is
>> needed), it
>> should give us a bisectable history and I can stick it into a late/*
>> branch right
>> away.
>
>
> FYI, MMC DT adaptation just got merged, I2C, GPIO, SPI, regulator DT
> adaptation were already merged before, so it means that this branch can be
> merged to take advantage of all the DT adapted drivers.

I've pulled this in as late/omap-dt, included in next/dt3 and
for-next. I'll let it sit in linux-next for at least one day before
it's sent in. Since it's just device tree additions, risk for
regressions should be low.


-Olof
Olof Johansson - April 15, 2012, 1:19 a.m.
Benoit, Tony,

On Thu, Mar 29, 2012 at 11:31 AM, Olof Johansson <olof@lixom.net> wrote:
> On Thu, Mar 29, 2012 at 7:08 AM, Cousson, Benoit <b-cousson@ti.com> wrote:
>> FYI, MMC DT adaptation just got merged, I2C, GPIO, SPI, regulator DT
>> adaptation were already merged before, so it means that this branch can be
>> merged to take advantage of all the DT adapted drivers.
>
> I've pulled this in as late/omap-dt, included in next/dt3 and
> for-next. I'll let it sit in linux-next for at least one day before
> it's sent in. Since it's just device tree additions, risk for
> regressions should be low.

As you've noticed, this didn't make it into 3.4 due to the window
closing early. :(

I've renamed the branch in arm-soc to omap/dt-missed-3.4 and merged it
into next/dt for the 3.5 merge window.


-Olof
Tony Lindgren - April 16, 2012, 6 p.m.
* Olof Johansson <olof@lixom.net> [120414 18:22]:
> Benoit, Tony,
> 
> On Thu, Mar 29, 2012 at 11:31 AM, Olof Johansson <olof@lixom.net> wrote:
> > On Thu, Mar 29, 2012 at 7:08 AM, Cousson, Benoit <b-cousson@ti.com> wrote:
> >> FYI, MMC DT adaptation just got merged, I2C, GPIO, SPI, regulator DT
> >> adaptation were already merged before, so it means that this branch can be
> >> merged to take advantage of all the DT adapted drivers.
> >
> > I've pulled this in as late/omap-dt, included in next/dt3 and
> > for-next. I'll let it sit in linux-next for at least one day before
> > it's sent in. Since it's just device tree additions, risk for
> > regressions should be low.
> 
> As you've noticed, this didn't make it into 3.4 due to the window
> closing early. :(
> 
> I've renamed the branch in arm-soc to omap/dt-missed-3.4 and merged it
> into next/dt for the 3.5 merge window.

OK, no problem. Thanks for the update.

Tony
Cousson, Benoit - April 16, 2012, 8:29 p.m.
Hi Olof,

On 4/15/2012 3:19 AM, Olof Johansson wrote:
> Benoit, Tony,
>
> On Thu, Mar 29, 2012 at 11:31 AM, Olof Johansson<olof@lixom.net>  wrote:
>> On Thu, Mar 29, 2012 at 7:08 AM, Cousson, Benoit<b-cousson@ti.com>  wrote:
>>> FYI, MMC DT adaptation just got merged, I2C, GPIO, SPI, regulator DT
>>> adaptation were already merged before, so it means that this branch can be
>>> merged to take advantage of all the DT adapted drivers.
>>
>> I've pulled this in as late/omap-dt, included in next/dt3 and
>> for-next. I'll let it sit in linux-next for at least one day before
>> it's sent in. Since it's just device tree additions, risk for
>> regressions should be low.
>
> As you've noticed, this didn't make it into 3.4 due to the window
> closing early. :(

Yes, I did :-(

> I've renamed the branch in arm-soc to omap/dt-missed-3.4 and merged it
> into next/dt for the 3.5 merge window.

OK, cool, I was about to ping you about that series. I'll then be able 
to use it as a stable base for further OMAP DT patches.

Thanks,
Benoit