mbox

[U-Boot,GIT,PULL] Pull request: u-boot-imx

Message ID 4F58655A.50305@denx.de
State Superseded
Delegated to: Albert ARIBAUD
Headers show

Pull-request

git://www.denx.de/git/u-boot-imx.git master

Message

Stefano Babic March 8, 2012, 7:52 a.m. UTC
Hi Albert,

please pull from u-boot-imx, thanks.

The following changes since commit 32ec258f829808dd7cf74fd83ba999fdaaeab715:

  IXP: Fix GPIO_INT_ACT_LOW_SET() (2012-03-08 08:11:45 +0100)

are available in the git repository at:
  git://www.denx.de/git/u-boot-imx.git master

Dirk Behme (1):
      imximage: Remove overwriting of flash_offset

Eric Nelson (2):
      i.MX6: mx6qsabrelite: add ext2 support
      mx6q: mx6qsabrelite: setup_spi() should be called in board_init to
allow use for environment

Fabio Estevam (5):
      mx51evk: Fix CONFIG_SYS_MEMTEST_END
      mx53evk: Fix CONFIG_SYS_MEMTEST_END
      mx53smd: Fix CONFIG_SYS_MEMTEST_END
      efikamx: Fix CONFIG_SYS_MEMTEST_END
      mx31pdk: Fix CONFIG_SYS_MEMTEST_END

Helmut Raiger (1):
      mx31: add "ARM11P power gating" to get_reset_cause

 arch/arm/cpu/arm1136/mx31/generic.c           |    2 ++
 board/freescale/mx6qsabrelite/mx6qsabrelite.c |    8 ++++----
 include/configs/efikamx.h                     |    2 +-
 include/configs/mx31pdk.h                     |    2 +-
 include/configs/mx51evk.h                     |    2 +-
 include/configs/mx53evk.h                     |    2 +-
 include/configs/mx53smd.h                     |    2 +-
 include/configs/mx6qsabrelite.h               |    1 +
 tools/imximage.c                              |   18 ++++++++++++++----
 tools/imximage.h                              |    1 +
 10 files changed, 27 insertions(+), 13 deletions(-)

Comments

Albert ARIBAUD March 26, 2012, 8:45 p.m. UTC | #1
Hi Stefano,

Le 08/03/2012 08:52, Stefano Babic a écrit :
> Hi Albert,
>
> please pull from u-boot-imx, thanks.
>
> The following changes since commit 32ec258f829808dd7cf74fd83ba999fdaaeab715:
>
>    IXP: Fix GPIO_INT_ACT_LOW_SET() (2012-03-08 08:11:45 +0100)
>
> are available in the git repository at:
>    git://www.denx.de/git/u-boot-imx.git master
>
> Dirk Behme (1):
>        imximage: Remove overwriting of flash_offset
>
> Eric Nelson (2):
>        i.MX6: mx6qsabrelite: add ext2 support
>        mx6q: mx6qsabrelite: setup_spi() should be called in board_init to
> allow use for environment
>
> Fabio Estevam (5):
>        mx51evk: Fix CONFIG_SYS_MEMTEST_END
>        mx53evk: Fix CONFIG_SYS_MEMTEST_END
>        mx53smd: Fix CONFIG_SYS_MEMTEST_END
>        efikamx: Fix CONFIG_SYS_MEMTEST_END
>        mx31pdk: Fix CONFIG_SYS_MEMTEST_END
>
> Helmut Raiger (1):
>        mx31: add "ARM11P power gating" to get_reset_cause
>
>   arch/arm/cpu/arm1136/mx31/generic.c           |    2 ++
>   board/freescale/mx6qsabrelite/mx6qsabrelite.c |    8 ++++----
>   include/configs/efikamx.h                     |    2 +-
>   include/configs/mx31pdk.h                     |    2 +-
>   include/configs/mx51evk.h                     |    2 +-
>   include/configs/mx53evk.h                     |    2 +-
>   include/configs/mx53smd.h                     |    2 +-
>   include/configs/mx6qsabrelite.h               |    1 +
>   tools/imximage.c                              |   18 ++++++++++++++----
>   tools/imximage.h                              |    1 +
>   10 files changed, 27 insertions(+), 13 deletions(-)

Applied to u-boot-arm/master, thanks.

Amicalement,
Albert ARIBAUD March 26, 2012, 9:08 p.m. UTC | #2
Le 26/03/2012 22:45, Albert ARIBAUD a écrit :
> Hi Stefano,
>
> Le 08/03/2012 08:52, Stefano Babic a écrit :
>> Hi Albert,
>>
>> please pull from u-boot-imx, thanks.
>>
>> The following changes since commit
>> 32ec258f829808dd7cf74fd83ba999fdaaeab715:
>>
>> IXP: Fix GPIO_INT_ACT_LOW_SET() (2012-03-08 08:11:45 +0100)
>>
>> are available in the git repository at:
>> git://www.denx.de/git/u-boot-imx.git master
>>
>> Dirk Behme (1):
>> imximage: Remove overwriting of flash_offset
>>
>> Eric Nelson (2):
>> i.MX6: mx6qsabrelite: add ext2 support
>> mx6q: mx6qsabrelite: setup_spi() should be called in board_init to
>> allow use for environment
>>
>> Fabio Estevam (5):
>> mx51evk: Fix CONFIG_SYS_MEMTEST_END
>> mx53evk: Fix CONFIG_SYS_MEMTEST_END
>> mx53smd: Fix CONFIG_SYS_MEMTEST_END
>> efikamx: Fix CONFIG_SYS_MEMTEST_END
>> mx31pdk: Fix CONFIG_SYS_MEMTEST_END
>>
>> Helmut Raiger (1):
>> mx31: add "ARM11P power gating" to get_reset_cause
>>
>> arch/arm/cpu/arm1136/mx31/generic.c | 2 ++
>> board/freescale/mx6qsabrelite/mx6qsabrelite.c | 8 ++++----
>> include/configs/efikamx.h | 2 +-
>> include/configs/mx31pdk.h | 2 +-
>> include/configs/mx51evk.h | 2 +-
>> include/configs/mx53evk.h | 2 +-
>> include/configs/mx53smd.h | 2 +-
>> include/configs/mx6qsabrelite.h | 1 +
>> tools/imximage.c | 18 ++++++++++++++----
>> tools/imximage.h | 1 +
>> 10 files changed, 27 insertions(+), 13 deletions(-)
>
> Applied to u-boot-arm/master, thanks.
>
> Amicalement,

Correction: I seem to have misapplied this and the TI tree, so I rolled 
back my changes...

The imx master branch has moved and no longer starts with the commits 
above from the base above. Stefano, can you rebase on u-boot-arm and 
re-issue an up-to-date request?

Amicalement,
Stefano Babic March 27, 2012, 7:39 a.m. UTC | #3
On 26/03/2012 23:08, Albert ARIBAUD wrote:
> Le 26/03/2012 22:45, Albert ARIBAUD a écrit :
>> Hi Stefano,
>>
>> Le 08/03/2012 08:52, Stefano Babic a écrit :
>>> Hi Albert,
>>>
>>> please pull from u-boot-imx, thanks.
>>>
>>> The following changes since commit
>>> 32ec258f829808dd7cf74fd83ba999fdaaeab715:
>>>
>>> IXP: Fix GPIO_INT_ACT_LOW_SET() (2012-03-08 08:11:45 +0100)
>>>
>>> are available in the git repository at:
>>> git://www.denx.de/git/u-boot-imx.git master
>>>
>>> Dirk Behme (1):
>>> imximage: Remove overwriting of flash_offset
>>>
>>> Eric Nelson (2):
>>> i.MX6: mx6qsabrelite: add ext2 support
>>> mx6q: mx6qsabrelite: setup_spi() should be called in board_init to
>>> allow use for environment
>>>
>>> Fabio Estevam (5):
>>> mx51evk: Fix CONFIG_SYS_MEMTEST_END
>>> mx53evk: Fix CONFIG_SYS_MEMTEST_END
>>> mx53smd: Fix CONFIG_SYS_MEMTEST_END
>>> efikamx: Fix CONFIG_SYS_MEMTEST_END
>>> mx31pdk: Fix CONFIG_SYS_MEMTEST_END
>>>
>>> Helmut Raiger (1):
>>> mx31: add "ARM11P power gating" to get_reset_cause
>>>
>>> arch/arm/cpu/arm1136/mx31/generic.c | 2 ++
>>> board/freescale/mx6qsabrelite/mx6qsabrelite.c | 8 ++++----
>>> include/configs/efikamx.h | 2 +-
>>> include/configs/mx31pdk.h | 2 +-
>>> include/configs/mx51evk.h | 2 +-
>>> include/configs/mx53evk.h | 2 +-
>>> include/configs/mx53smd.h | 2 +-
>>> include/configs/mx6qsabrelite.h | 1 +
>>> tools/imximage.c | 18 ++++++++++++++----
>>> tools/imximage.h | 1 +
>>> 10 files changed, 27 insertions(+), 13 deletions(-)
>>
>> Applied to u-boot-arm/master, thanks.
>>
>> Amicalement,
> 
> Correction: I seem to have misapplied this and the TI tree, so I rolled
> back my changes...
> 
> The imx master branch has moved and no longer starts with the commits
> above from the base above. Stefano, can you rebase on u-boot-arm and
> re-issue an up-to-date request?

Yes, you're right- I had to rebase on u-boot.git because I needed some
fixes. I will resend my pull request.

Stefano
> 
> Amicalement,