[8/9] powerpc/mpc8548cds: rename mpc8548cds.dts to mpc8548cds_32b.dts and create mpc8548cds.dtsi

Message ID	1331024805-15926-7-git-send-email-chenhui.zhao@freescale.com (mailing list archive)
State	Accepted, archived
Delegated to:	Kumar Gala
Headers	show Return-Path: <linuxppc-dev-bounces+patchwork-incoming=ozlabs.org@lists.ozlabs.org> From: Zhao Chenhui <chenhui.zhao@freescale.com> To: <linuxppc-dev@lists.ozlabs.org> Subject: [PATCH 8/9] powerpc/mpc8548cds: rename mpc8548cds.dts to mpc8548cds_32b.dts and create mpc8548cds.dtsi Date: Tue, 6 Mar 2012 17:06:44 +0800 Message-ID: <1331024805-15926-7-git-send-email-chenhui.zhao@freescale.com> In-Reply-To: <1331024805-15926-1-git-send-email-chenhui.zhao@freescale.com> References: <1331024805-15926-1-git-send-email-chenhui.zhao@freescale.com> MIME-Version: 1.0 Precedence: list Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Errors-To: linuxppc-dev-bounces+patchwork-incoming=ozlabs.org@lists.ozlabs.org Sender: linuxppc-dev-bounces+patchwork-incoming=ozlabs.org@lists.ozlabs.org

diff --git a/arch/powerpc/boot/Makefile b/arch/powerpc/boot/Makefile index 8844a17..f6622e0 100644 --- a/arch/powerpc/boot/Makefile +++ b/arch/powerpc/boot/Makefile @@ -247,7 +247,7 @@ image-$(CONFIG_ASP834x) += dtbImage.asp834x-redboot image-$(CONFIG_MPC8540_ADS) += cuImage.mpc8540ads image-$(CONFIG_MPC8560_ADS) += cuImage.mpc8560ads image-$(CONFIG_MPC85xx_CDS) += cuImage.mpc8541cds \ - cuImage.mpc8548cds \ + cuImage.mpc8548cds_32b \ cuImage.mpc8555cds image-$(CONFIG_MPC85xx_MDS) += cuImage.mpc8568mds image-$(CONFIG_MPC85xx_DS) += cuImage.mpc8544ds \ diff --git a/arch/powerpc/boot/dts/mpc8548cds.dts b/arch/powerpc/boot/dts/mpc8548cds.dts deleted file mode 100644 index 0683983..0000000 --- a/arch/powerpc/boot/dts/mpc8548cds.dts +++ /dev/null @@ -1,357 +0,0 @@ -/* - * MPC8548 CDS Device Tree Source - * - * Copyright 2006, 2008, 2011 Freescale Semiconductor Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ - -/include/ "fsl/mpc8548si-pre.dtsi" - -/ { - model = "MPC8548CDS"; - compatible = "MPC8548CDS", "MPC85xxCDS"; - - aliases { - ethernet0 = &enet0; - ethernet1 = &enet1; - ethernet2 = &enet2; - ethernet3 = &enet3; - serial0 = &serial0; - serial1 = &serial1; - pci0 = &pci0; - pci1 = &pci1; - pci2 = &pci2; - }; - - memory { - device_type = "memory"; - reg = <0 0 0x0 0x8000000>; // 128M at 0x0 - }; - - lbc: localbus@e0005000 { - reg = <0 0xe0005000 0 0x1000>; - - ranges = <0x0 0x0 0x0 0xff000000 0x01000000 - 0x1 0x0 0x0 0xf8004000 0x00001000>; - - nor@0,0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "cfi-flash"; - reg = <0x0 0x0 0x01000000>; - bank-width = <2>; - device-width = <2>; - - partition@0 { - reg = <0x0 0x0b00000>; - label = "ramdisk-nor"; - }; - - partition@300000 { - reg = <0x0b00000 0x0400000>; - label = "kernel-nor"; - }; - - partition@700000 { - reg = <0x0f00000 0x060000>; - label = "dtb-nor"; - }; - - partition@760000 { - reg = <0x0f60000 0x020000>; - label = "env-nor"; - read-only; - }; - - partition@780000 { - reg = <0x0f80000 0x080000>; - label = "u-boot-nor"; - read-only; - }; - }; - - board-control@1,0 { - compatible = "fsl,mpc8548cds-fpga"; - reg = <0x1 0x0 0x1000>; - }; - }; - - soc: soc8548@e0000000 { - ranges = <0 0x0 0xe0000000 0x100000>; - - i2c@3000 { - eeprom@50 { - compatible = "atmel,24c64"; - reg = <0x50>; - }; - - eeprom@56 { - compatible = "atmel,24c64"; - reg = <0x56>; - }; - - eeprom@57 { - compatible = "atmel,24c64"; - reg = <0x57>; - }; - }; - - i2c@3100 { - eeprom@50 { - compatible = "atmel,24c64"; - reg = <0x50>; - }; - }; - - enet0: ethernet@24000 { - tbi-handle = <&tbi0>; - phy-handle = <&phy0>; - }; - - mdio@24520 { - phy0: ethernet-phy@0 { - interrupts = <5 1 0 0>; - reg = <0x0>; - device_type = "ethernet-phy"; - }; - phy1: ethernet-phy@1 { - interrupts = <5 1 0 0>; - reg = <0x1>; - device_type = "ethernet-phy"; - }; - phy2: ethernet-phy@2 { - interrupts = <5 1 0 0>; - reg = <0x2>; - device_type = "ethernet-phy"; - }; - phy3: ethernet-phy@3 { - interrupts = <5 1 0 0>; - reg = <0x3>; - device_type = "ethernet-phy"; - }; - tbi0: tbi-phy@11 { - reg = <0x11>; - device_type = "tbi-phy"; - }; - }; - - enet1: ethernet@25000 { - tbi-handle = <&tbi1>; - phy-handle = <&phy1>; - }; - - mdio@25520 { - tbi1: tbi-phy@11 { - reg = <0x11>; - device_type = "tbi-phy"; - }; - }; - - enet2: ethernet@26000 { - tbi-handle = <&tbi2>; - phy-handle = <&phy2>; - }; - - mdio@26520 { - tbi2: tbi-phy@11 { - reg = <0x11>; - device_type = "tbi-phy"; - }; - }; - - enet3: ethernet@27000 { - tbi-handle = <&tbi3>; - phy-handle = <&phy3>; - }; - - mdio@27520 { - tbi3: tbi-phy@11 { - reg = <0x11>; - device_type = "tbi-phy"; - }; - }; - }; - - pci0: pci@e0008000 { - reg = <0 0xe0008000 0 0x1000>; - ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x10000000 - 0x1000000 0x0 0x00000000 0 0xe2000000 0x0 0x800000>; - clock-frequency = <66666666>; - interrupt-map-mask = <0xf800 0x0 0x0 0x7>; - interrupt-map = < - /* IDSEL 0x4 (PCIX Slot 2) */ - 0x2000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0 - 0x2000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0 - 0x2000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0 - 0x2000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0 - - /* IDSEL 0x5 (PCIX Slot 3) */ - 0x2800 0x0 0x0 0x1 &mpic 0x1 0x1 0 0 - 0x2800 0x0 0x0 0x2 &mpic 0x2 0x1 0 0 - 0x2800 0x0 0x0 0x3 &mpic 0x3 0x1 0 0 - 0x2800 0x0 0x0 0x4 &mpic 0x0 0x1 0 0 - - /* IDSEL 0x6 (PCIX Slot 4) */ - 0x3000 0x0 0x0 0x1 &mpic 0x2 0x1 0 0 - 0x3000 0x0 0x0 0x2 &mpic 0x3 0x1 0 0 - 0x3000 0x0 0x0 0x3 &mpic 0x0 0x1 0 0 - 0x3000 0x0 0x0 0x4 &mpic 0x1 0x1 0 0 - - /* IDSEL 0x8 (PCIX Slot 5) */ - 0x4000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0 - 0x4000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0 - 0x4000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0 - 0x4000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0 - - /* IDSEL 0xC (Tsi310 bridge) */ - 0x6000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0 - 0x6000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0 - 0x6000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0 - 0x6000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0 - - /* IDSEL 0x14 (Slot 2) */ - 0xa000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0 - 0xa000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0 - 0xa000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0 - 0xa000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0 - - /* IDSEL 0x15 (Slot 3) */ - 0xa800 0x0 0x0 0x1 &mpic 0x1 0x1 0 0 - 0xa800 0x0 0x0 0x2 &mpic 0x2 0x1 0 0 - 0xa800 0x0 0x0 0x3 &mpic 0x3 0x1 0 0 - 0xa800 0x0 0x0 0x4 &mpic 0x0 0x1 0 0 - - /* IDSEL 0x16 (Slot 4) */ - 0xb000 0x0 0x0 0x1 &mpic 0x2 0x1 0 0 - 0xb000 0x0 0x0 0x2 &mpic 0x3 0x1 0 0 - 0xb000 0x0 0x0 0x3 &mpic 0x0 0x1 0 0 - 0xb000 0x0 0x0 0x4 &mpic 0x1 0x1 0 0 - - /* IDSEL 0x18 (Slot 5) */ - 0xc000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0 - 0xc000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0 - 0xc000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0 - 0xc000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0 - - /* IDSEL 0x1C (Tsi310 bridge PCI primary) */ - 0xe000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0 - 0xe000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0 - 0xe000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0 - 0xe000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0>; - - pci_bridge@1c { - interrupt-map-mask = <0xf800 0x0 0x0 0x7>; - interrupt-map = < - - /* IDSEL 0x00 (PrPMC Site) */ - 0000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0 - 0000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0 - 0000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0 - 0000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0 - - /* IDSEL 0x04 (VIA chip) */ - 0x2000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0 - 0x2000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0 - 0x2000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0 - 0x2000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0 - - /* IDSEL 0x05 (8139) */ - 0x2800 0x0 0x0 0x1 &mpic 0x1 0x1 0 0 - - /* IDSEL 0x06 (Slot 6) */ - 0x3000 0x0 0x0 0x1 &mpic 0x2 0x1 0 0 - 0x3000 0x0 0x0 0x2 &mpic 0x3 0x1 0 0 - 0x3000 0x0 0x0 0x3 &mpic 0x0 0x1 0 0 - 0x3000 0x0 0x0 0x4 &mpic 0x1 0x1 0 0 - - /* IDESL 0x07 (Slot 7) */ - 0x3800 0x0 0x0 0x1 &mpic 0x3 0x1 0 0 - 0x3800 0x0 0x0 0x2 &mpic 0x0 0x1 0 0 - 0x3800 0x0 0x0 0x3 &mpic 0x1 0x1 0 0 - 0x3800 0x0 0x0 0x4 &mpic 0x2 0x1 0 0>; - - reg = <0xe000 0x0 0x0 0x0 0x0>; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - ranges = <0x2000000 0x0 0x80000000 - 0x2000000 0x0 0x80000000 - 0x0 0x20000000 - 0x1000000 0x0 0x0 - 0x1000000 0x0 0x0 - 0x0 0x80000>; - clock-frequency = <33333333>; - - isa@4 { - device_type = "isa"; - #interrupt-cells = <2>; - #size-cells = <1>; - #address-cells = <2>; - reg = <0x2000 0x0 0x0 0x0 0x0>; - ranges = <0x1 0x0 0x1000000 0x0 0x0 0x1000>; - interrupt-parent = <&i8259>; - - i8259: interrupt-controller@20 { - interrupt-controller; - device_type = "interrupt-controller"; - reg = <0x1 0x20 0x2 - 0x1 0xa0 0x2 - 0x1 0x4d0 0x2>; - #address-cells = <0>; - #interrupt-cells = <2>; - compatible = "chrp,iic"; - interrupts = <0 1 0 0>; - interrupt-parent = <&mpic>; - }; - - rtc@70 { - compatible = "pnpPNP,b00"; - reg = <0x1 0x70 0x2>; - }; - }; - }; - }; - - pci1: pci@e0009000 { - reg = <0 0xe0009000 0 0x1000>; - ranges = <0x2000000 0x0 0x90000000 0 0x90000000 0x0 0x10000000 - 0x1000000 0x0 0x00000000 0 0xe2800000 0x0 0x800000>; - clock-frequency = <66666666>; - interrupt-map-mask = <0xf800 0x0 0x0 0x7>; - interrupt-map = < - - /* IDSEL 0x15 */ - 0xa800 0x0 0x0 0x1 &mpic 0xb 0x1 0 0 - 0xa800 0x0 0x0 0x2 &mpic 0x1 0x1 0 0 - 0xa800 0x0 0x0 0x3 &mpic 0x2 0x1 0 0 - 0xa800 0x0 0x0 0x4 &mpic 0x3 0x1 0 0>; - }; - - pci2: pcie@e000a000 { - reg = <0 0xe000a000 0 0x1000>; - ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000 - 0x1000000 0x0 0x00000000 0 0xe3000000 0x0 0x100000>; - pcie@0 { - ranges = <0x2000000 0x0 0xa0000000 - 0x2000000 0x0 0xa0000000 - 0x0 0x20000000 - - 0x1000000 0x0 0x0 - 0x1000000 0x0 0x0 - 0x0 0x100000>; - }; - }; - - rio: rapidio@e00c0000 { - reg = <0x0 0xe00c0000 0x0 0x20000>; - port1 { - ranges = <0x0 0x0 0x0 0xc0000000 0x0 0x20000000>; - }; - }; -}; - -/include/ "fsl/mpc8548si-post.dtsi" diff --git a/arch/powerpc/boot/dts/mpc8548cds.dtsi b/arch/powerpc/boot/dts/mpc8548cds.dtsi new file mode 100644 index 0000000..c61f525 --- /dev/null +++ b/arch/powerpc/boot/dts/mpc8548cds.dtsi @@ -0,0 +1,306 @@ +/* + * MPC8548CDS Device Tree Source stub (no addresses or top-level ranges) + * + * Copyright 2012 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +&board_lbc { + nor@0,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cfi-flash"; + reg = <0x0 0x0 0x01000000>; + bank-width = <2>; + device-width = <2>; + + partition@0 { + reg = <0x0 0x0b00000>; + label = "ramdisk-nor"; + }; + + partition@300000 { + reg = <0x0b00000 0x0400000>; + label = "kernel-nor"; + }; + + partition@700000 { + reg = <0x0f00000 0x060000>; + label = "dtb-nor"; + }; + + partition@760000 { + reg = <0x0f60000 0x020000>; + label = "env-nor"; + read-only; + }; + + partition@780000 { + reg = <0x0f80000 0x080000>; + label = "u-boot-nor"; + read-only; + }; + }; + + board-control@1,0 { + compatible = "fsl,mpc8548cds-fpga"; + reg = <0x1 0x0 0x1000>; + }; +}; + +&board_soc { + i2c@3000 { + eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + }; + + eeprom@56 { + compatible = "atmel,24c64"; + reg = <0x56>; + }; + + eeprom@57 { + compatible = "atmel,24c64"; + reg = <0x57>; + }; + }; + + i2c@3100 { + eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + }; + }; + + enet0: ethernet@24000 { + tbi-handle = <&tbi0>; + phy-handle = <&phy0>; + }; + + mdio@24520 { + phy0: ethernet-phy@0 { + interrupts = <5 1 0 0>; + reg = <0x0>; + device_type = "ethernet-phy"; + }; + phy1: ethernet-phy@1 { + interrupts = <5 1 0 0>; + reg = <0x1>; + device_type = "ethernet-phy"; + }; + phy2: ethernet-phy@2 { + interrupts = <5 1 0 0>; + reg = <0x2>; + device_type = "ethernet-phy"; + }; + phy3: ethernet-phy@3 { + interrupts = <5 1 0 0>; + reg = <0x3>; + device_type = "ethernet-phy"; + }; + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + enet1: ethernet@25000 { + tbi-handle = <&tbi1>; + phy-handle = <&phy1>; + }; + + mdio@25520 { + tbi1: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + enet2: ethernet@26000 { + tbi-handle = <&tbi2>; + phy-handle = <&phy2>; + }; + + mdio@26520 { + tbi2: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + enet3: ethernet@27000 { + tbi-handle = <&tbi3>; + phy-handle = <&phy3>; + }; + + mdio@27520 { + tbi3: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; +}; + +&board_pci0 { + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; + interrupt-map = < + /* IDSEL 0x4 (PCIX Slot 2) */ + 0x2000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0 + 0x2000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0 + 0x2000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0 + 0x2000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0 + + /* IDSEL 0x5 (PCIX Slot 3) */ + 0x2800 0x0 0x0 0x1 &mpic 0x1 0x1 0 0 + 0x2800 0x0 0x0 0x2 &mpic 0x2 0x1 0 0 + 0x2800 0x0 0x0 0x3 &mpic 0x3 0x1 0 0 + 0x2800 0x0 0x0 0x4 &mpic 0x0 0x1 0 0 + + /* IDSEL 0x6 (PCIX Slot 4) */ + 0x3000 0x0 0x0 0x1 &mpic 0x2 0x1 0 0 + 0x3000 0x0 0x0 0x2 &mpic 0x3 0x1 0 0 + 0x3000 0x0 0x0 0x3 &mpic 0x0 0x1 0 0 + 0x3000 0x0 0x0 0x4 &mpic 0x1 0x1 0 0 + + /* IDSEL 0x8 (PCIX Slot 5) */ + 0x4000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0 + 0x4000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0 + 0x4000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0 + 0x4000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0 + + /* IDSEL 0xC (Tsi310 bridge) */ + 0x6000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0 + 0x6000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0 + 0x6000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0 + 0x6000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0 + + /* IDSEL 0x14 (Slot 2) */ + 0xa000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0 + 0xa000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0 + 0xa000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0 + 0xa000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0 + + /* IDSEL 0x15 (Slot 3) */ + 0xa800 0x0 0x0 0x1 &mpic 0x1 0x1 0 0 + 0xa800 0x0 0x0 0x2 &mpic 0x2 0x1 0 0 + 0xa800 0x0 0x0 0x3 &mpic 0x3 0x1 0 0 + 0xa800 0x0 0x0 0x4 &mpic 0x0 0x1 0 0 + + /* IDSEL 0x16 (Slot 4) */ + 0xb000 0x0 0x0 0x1 &mpic 0x2 0x1 0 0 + 0xb000 0x0 0x0 0x2 &mpic 0x3 0x1 0 0 + 0xb000 0x0 0x0 0x3 &mpic 0x0 0x1 0 0 + 0xb000 0x0 0x0 0x4 &mpic 0x1 0x1 0 0 + + /* IDSEL 0x18 (Slot 5) */ + 0xc000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0 + 0xc000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0 + 0xc000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0 + 0xc000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0 + + /* IDSEL 0x1C (Tsi310 bridge PCI primary) */ + 0xe000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0 + 0xe000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0 + 0xe000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0 + 0xe000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0>; + + pci_bridge@1c { + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; + interrupt-map = < + + /* IDSEL 0x00 (PrPMC Site) */ + 0000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0 + 0000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0 + 0000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0 + 0000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0 + + /* IDSEL 0x04 (VIA chip) */ + 0x2000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0 + 0x2000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0 + 0x2000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0 + 0x2000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0 + + /* IDSEL 0x05 (8139) */ + 0x2800 0x0 0x0 0x1 &mpic 0x1 0x1 0 0 + + /* IDSEL 0x06 (Slot 6) */ + 0x3000 0x0 0x0 0x1 &mpic 0x2 0x1 0 0 + 0x3000 0x0 0x0 0x2 &mpic 0x3 0x1 0 0 + 0x3000 0x0 0x0 0x3 &mpic 0x0 0x1 0 0 + 0x3000 0x0 0x0 0x4 &mpic 0x1 0x1 0 0 + + /* IDESL 0x07 (Slot 7) */ + 0x3800 0x0 0x0 0x1 &mpic 0x3 0x1 0 0 + 0x3800 0x0 0x0 0x2 &mpic 0x0 0x1 0 0 + 0x3800 0x0 0x0 0x3 &mpic 0x1 0x1 0 0 + 0x3800 0x0 0x0 0x4 &mpic 0x2 0x1 0 0>; + + reg = <0xe000 0x0 0x0 0x0 0x0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + ranges = <0x2000000 0x0 0x80000000 + 0x2000000 0x0 0x80000000 + 0x0 0x20000000 + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x80000>; + clock-frequency = <33333333>; + + isa@4 { + device_type = "isa"; + #interrupt-cells = <2>; + #size-cells = <1>; + #address-cells = <2>; + reg = <0x2000 0x0 0x0 0x0 0x0>; + ranges = <0x1 0x0 0x1000000 0x0 0x0 0x1000>; + interrupt-parent = <&i8259>; + + i8259: interrupt-controller@20 { + interrupt-controller; + device_type = "interrupt-controller"; + reg = <0x1 0x20 0x2 + 0x1 0xa0 0x2 + 0x1 0x4d0 0x2>; + #address-cells = <0>; + #interrupt-cells = <2>; + compatible = "chrp,iic"; + interrupts = <0 1 0 0>; + interrupt-parent = <&mpic>; + }; + + rtc@70 { + compatible = "pnpPNP,b00"; + reg = <0x1 0x70 0x2>; + }; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/mpc8548cds_32b.dts b/arch/powerpc/boot/dts/mpc8548cds_32b.dts new file mode 100644 index 0000000..6fd6316 --- /dev/null +++ b/arch/powerpc/boot/dts/mpc8548cds_32b.dts @@ -0,0 +1,86 @@ +/* + * MPC8548 CDS Device Tree Source (32-bit address map) + * + * Copyright 2006, 2008, 2011-2012 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/include/ "fsl/mpc8548si-pre.dtsi" + +/ { + model = "MPC8548CDS"; + compatible = "MPC8548CDS", "MPC85xxCDS"; + + memory { + device_type = "memory"; + reg = <0 0 0x0 0x8000000>; // 128M at 0x0 + }; + + board_lbc: lbc: localbus@e0005000 { + reg = <0 0xe0005000 0 0x1000>; + + ranges = <0x0 0x0 0x0 0xff000000 0x01000000 + 0x1 0x0 0x0 0xf8004000 0x00001000>; + + }; + + board_soc: soc: soc8548@e0000000 { + ranges = <0 0x0 0xe0000000 0x100000>; + }; + + board_pci0: pci0: pci@e0008000 { + reg = <0 0xe0008000 0 0x1000>; + ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x10000000 + 0x1000000 0x0 0x00000000 0 0xe2000000 0x0 0x800000>; + clock-frequency = <66666666>; + }; + + pci1: pci@e0009000 { + reg = <0 0xe0009000 0 0x1000>; + ranges = <0x2000000 0x0 0x90000000 0 0x90000000 0x0 0x10000000 + 0x1000000 0x0 0x00000000 0 0xe2800000 0x0 0x800000>; + clock-frequency = <66666666>; + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; + interrupt-map = < + + /* IDSEL 0x15 */ + 0xa800 0x0 0x0 0x1 &mpic 0xb 0x1 0 0 + 0xa800 0x0 0x0 0x2 &mpic 0x1 0x1 0 0 + 0xa800 0x0 0x0 0x3 &mpic 0x2 0x1 0 0 + 0xa800 0x0 0x0 0x4 &mpic 0x3 0x1 0 0>; + }; + + pci2: pcie@e000a000 { + reg = <0 0xe000a000 0 0x1000>; + ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0 0xe3000000 0x0 0x100000>; + pcie@0 { + ranges = <0x2000000 0x0 0xa0000000 + 0x2000000 0x0 0xa0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; + + rio: rapidio@e00c0000 { + reg = <0x0 0xe00c0000 0x0 0x20000>; + port1 { + ranges = <0x0 0x0 0x0 0xc0000000 0x0 0x20000000>; + }; + }; +}; + +/* + * mpc8548cds.dtsi must be last to ensure board_pci0 overrides pci0 settings + * for interrupt-map & interrupt-map-mask. + */ + +/include/ "fsl/mpc8548si-post.dtsi" +/include/ "mpc8548cds.dtsi"

[8/9] powerpc/mpc8548cds: rename mpc8548cds.dts to mpc8548cds_32b.dts and create mpc8548cds.dtsi

Commit Message

Comments

Patch