Index: include/ffi_common.h
===================================================================
--- include/ffi_common.h	(revision 184894)
+++ include/ffi_common.h	(working copy)
@@ -1,7 +1,8 @@
 /* -----------------------------------------------------------------------
-   ffi_common.h - Copyright (c) 1996  Red Hat, Inc.
-   Copyright (C) 2007 Free Software Foundation, Inc
-
+   ffi_common.h - Copyright (C) 2011, 2012  Anthony Green
+                  Copyright (C) 2007  Free Software Foundation, Inc
+                  Copyright (c) 1996  Red Hat, Inc.
+                  
    Common internal definitions and macros. Only necessary for building
    libffi.
    ----------------------------------------------------------------------- */
@@ -74,6 +75,8 @@
 
 /* Perform machine dependent cif processing */
 ffi_status ffi_prep_cif_machdep(ffi_cif *cif);
+ffi_status ffi_prep_cif_machdep_var(ffi_cif *cif,
+	 unsigned int nfixedargs, unsigned int ntotalargs);
 
 /* Extended cif, used in callback from assembly routine */
 typedef struct
@@ -112,11 +115,14 @@
 
 typedef float FLOAT32;
 
+#ifndef __GNUC__
+#define __builtin_expect(x, expected_value) (x)
+#endif
+#define LIKELY(x)    __builtin_expect(!!(x),1)
+#define UNLIKELY(x)  __builtin_expect((x)!=0,0)
 
 #ifdef __cplusplus
 }
 #endif
 
 #endif
-
-
Index: include/ffi.h.in
===================================================================
--- include/ffi.h.in	(revision 184894)
+++ include/ffi.h.in	(working copy)
@@ -1,16 +1,17 @@
 /* -----------------------------------------------------------------*-C-*-
-   libffi @VERSION@ - Copyright (c) 1996-2003, 2007, 2008  Red Hat, Inc.
+   libffi @VERSION@ - Copyright (c) 2011 Anthony Green
+                    - Copyright (c) 1996-2003, 2007, 2008 Red Hat, Inc.
 
-   Permission is hereby granted, free of charge, to any person obtaining
-   a copy of this software and associated documentation files (the
-   ``Software''), to deal in the Software without restriction, including
-   without limitation the rights to use, copy, modify, merge, publish,
-   distribute, sublicense, and/or sell copies of the Software, and to
-   permit persons to whom the Software is furnished to do so, subject to
-   the following conditions:
+   Permission is hereby granted, free of charge, to any person
+   obtaining a copy of this software and associated documentation
+   files (the ``Software''), to deal in the Software without
+   restriction, including without limitation the rights to use, copy,
+   modify, merge, publish, distribute, sublicense, and/or sell copies
+   of the Software, and to permit persons to whom the Software is
+   furnished to do so, subject to the following conditions:
 
-   The above copyright notice and this permission notice shall be included
-   in all copies or substantial portions of the Software.
+   The above copyright notice and this permission notice shall be
+   included in all copies or substantial portions of the Software.
 
    THE SOFTWARE IS PROVIDED ``AS IS'', WITHOUT WARRANTY OF ANY KIND,
    EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
@@ -77,15 +78,31 @@
 /* LONG_LONG_MAX is not always defined (not if STRICT_ANSI, for example).
    But we can find it either under the correct ANSI name, or under GNU
    C's internal name.  */
+
+#define FFI_64_BIT_MAX 9223372036854775807
+
 #ifdef LONG_LONG_MAX
 # define FFI_LONG_LONG_MAX LONG_LONG_MAX
 #else
 # ifdef LLONG_MAX
 #  define FFI_LONG_LONG_MAX LLONG_MAX
+#  ifdef _AIX52 /* or newer has C99 LLONG_MAX */
+#   undef FFI_64_BIT_MAX
+#   define FFI_64_BIT_MAX 9223372036854775807LL
+#  endif /* _AIX52 or newer */
 # else
 #  ifdef __GNUC__
 #   define FFI_LONG_LONG_MAX __LONG_LONG_MAX__
 #  endif
+#  ifdef _AIX /* AIX 5.1 and earlier have LONGLONG_MAX */
+#   ifndef __PPC64__
+#    if defined (__IBMC__) || defined (__IBMCPP__)
+#     define FFI_LONG_LONG_MAX LONGLONG_MAX
+#    endif
+#   endif /* __PPC64__ */
+#   undef  FFI_64_BIT_MAX
+#   define FFI_64_BIT_MAX 9223372036854775807LL
+#  endif
 # endif
 #endif
 
@@ -132,17 +149,17 @@
 #endif
 
 #if LONG_MAX == 2147483647
-# if FFI_LONG_LONG_MAX != 9223372036854775807
+# if FFI_LONG_LONG_MAX != FFI_64_BIT_MAX
  #error "no 64-bit data type supported"
 # endif
-#elif LONG_MAX != 9223372036854775807
+#elif LONG_MAX != FFI_64_BIT_MAX
  #error "long size not supported"
 #endif
 
 #if LONG_MAX == 2147483647
 # define ffi_type_ulong        ffi_type_uint32
 # define ffi_type_slong        ffi_type_sint32
-#elif LONG_MAX == 9223372036854775807
+#elif LONG_MAX == FFI_64_BIT_MAX
 # define ffi_type_ulong        ffi_type_uint64
 # define ffi_type_slong        ffi_type_sint64
 #else
@@ -190,12 +207,21 @@
 #endif
 } ffi_cif;
 
+/* Used internally, but overridden by some architectures */
+ffi_status ffi_prep_cif_core(ffi_cif *cif,
+			     ffi_abi abi,
+			     unsigned int isvariadic,
+			     unsigned int nfixedargs,
+			     unsigned int ntotalargs,
+			     ffi_type *rtype,
+			     ffi_type **atypes);
+
 /* ---- Definitions for the raw API -------------------------------------- */
 
 #ifndef FFI_SIZEOF_ARG
 # if LONG_MAX == 2147483647
 #  define FFI_SIZEOF_ARG        4
-# elif LONG_MAX == 9223372036854775807
+# elif LONG_MAX == FFI_64_BIT_MAX
 #  define FFI_SIZEOF_ARG        8
 # endif
 #endif
@@ -265,6 +291,9 @@
 } ffi_closure __attribute__((aligned (8)));
 #else
 } ffi_closure;
+# ifdef __sgi
+#  pragma pack 0
+# endif
 #endif
 
 void *ffi_closure_alloc (size_t size, void **code);
@@ -283,6 +312,9 @@
 		      void *user_data,
 		      void*codeloc);
 
+#ifdef __sgi
+# pragma pack 8
+#endif
 typedef struct {
   char tramp[FFI_TRAMPOLINE_SIZE];
 
@@ -361,6 +393,13 @@
 			ffi_type *rtype,
 			ffi_type **atypes);
 
+ffi_status ffi_prep_cif_var(ffi_cif *cif,
+			    ffi_abi abi,
+			    unsigned int nfixedargs,
+			    unsigned int ntotalargs,
+			    ffi_type *rtype,
+			    ffi_type **atypes);
+
 void ffi_call(ffi_cif *cif,
 	      void (*fn)(void),
 	      void *rvalue,
Index: msvcc.sh
===================================================================
--- msvcc.sh	(revision 184894)
+++ msvcc.sh	(working copy)
@@ -42,10 +42,11 @@
 # format and translated into something sensible for cl or ml.
 #
 
-args="-nologo"
+args="-nologo -W3"
 md=-MD
 cl="cl"
 ml="ml"
+safeseh="-safeseh"
 output=
 
 while [ $# -gt 0 ]
@@ -63,15 +64,28 @@
     -m64)
       cl="cl"   # "$MSVC/x86_amd64/cl"
       ml="ml64" # "$MSVC/x86_amd64/ml64"
+      safeseh=
       shift 1
     ;;
+    -O0)
+      args="$args -Od"
+      shift 1
+    ;;
     -O*)
-      args="$args $1"
+      # If we're optimizing, make sure we explicitly turn on some optimizations
+      # that are implicitly disabled by debug symbols (-Zi).
+      args="$args $1 -OPT:REF -OPT:ICF -INCREMENTAL:NO"
       shift 1
     ;;
     -g)
-      # Can't specify -RTC1 or -Zi in opt. -Gy is ok. Use -OPT:REF?
-      args="$args -D_DEBUG -RTC1 -Zi"
+      # Enable debug symbol generation.
+      args="$args -Zi -DEBUG"
+      shift 1
+    ;;
+    -DFFI_DEBUG)
+      # Link against debug CRT and enable runtime error checks.
+      args="$args -RTC1"
+      defines="$defines $1"
       md=-MDd
       shift 1
     ;;
@@ -108,8 +122,8 @@
       shift 1
     ;;
     -Wall)
-      # -Wall on MSVC is overzealous. Use -W3 instead.
-      args="$args -W3"
+      # -Wall on MSVC is overzealous, and we already build with -W3. Nothing
+      # to do here.
       shift 1
     ;;
     -Werror)
@@ -164,7 +178,7 @@
     echo "$cl -nologo -EP $includes $defines $src > $ppsrc"
     "$cl" -nologo -EP $includes $defines $src > $ppsrc || exit $?
     output="$(echo $output | sed 's%/F[dpa][^ ]*%%g')"
-    args="-nologo -safeseh $single $output $ppsrc"
+    args="-nologo $safeseh $single $output $ppsrc"
 
     echo "$ml $args"
     eval "\"$ml\" $args"
Index: fficonfig.h.in
===================================================================
--- fficonfig.h.in	(revision 184894)
+++ fficonfig.h.in	(working copy)
@@ -17,6 +17,9 @@
 /* Define this if you want extra debugging. */
 #undef FFI_DEBUG
 
+/* Cannot use PROT_EXEC on this target, so, we revert to alternative means */
+#undef FFI_EXEC_TRAMPOLINE_TABLE
+
 /* Cannot use malloc on this target, so, we revert to alternative means */
 #undef FFI_MMAP_EXEC_WRIT
 
Index: ChangeLog
===================================================================
--- ChangeLog	(revision 184894)
+++ ChangeLog	(working copy)
@@ -1,37 +1,36 @@
-2012-02-27  Mikael Pettersson  <mikpe@it.uu.se>
+2012-03-03  H.J. Lu  <hongjiu.lu@intel.com>
 
-	PR libffi/52223
-	* Makefile.am (FLAGS_TO_PASS): Define.
-	* Makefile.in: Regenerate.
+	* src/x86/ffi64.c (ffi_call): Cast the return value to unsigned
+	long.
+	(ffi_prep_closure_loc): Cast to 64bit address in trampoline.
+	(ffi_closure_unix64_inner): Cast return pointer to unsigned long
+	first.
 
-2012-02-23  Kai Tietz  <ktietz@redhat.com>
+	* src/x86/ffitarget.h (FFI_SIZEOF_ARG): Defined to 8 for x32.
+	(ffi_arg): Set to unsigned long long for x32.
+	(ffi_sarg): Set to long long for x32.
 
-	PR libffi/52221
-	* src/x86/ffi.c (ffi_closure_raw_THISCALL): New
-	prototype.
-	(ffi_prep_raw_closure_loc): Use ffi_closure_raw_THISCALL for
-	thiscall-convention.
-	(ffi_raw_call): Use ffi_prep_args_raw.
-	* src/x86/win32.S (ffi_closure_raw_THISCALL): Add
-	implementation for stub.
+2012-03-03  H.J. Lu  <hongjiu.lu@intel.com>
 
-2012-02-13  Kai Tietz  <ktietz@redhat.com>
+	* src/prep_cif.c (ffi_prep_cif_core): Properly check bad ABI.
 
-	PR libffi/52221
-	* src/x86/ffi.c (ffi_prep_raw_closure_loc): Add thiscall
-	support for X86_WIN32.
-	(FFI_INIT_TRAMPOLINE_THISCALL): Fix displacement.
+2012-03-03  Andoni Morales Alastruey  <ylatuya@gmail.com>
 
-2012-02-11  Eric Botcazou  <ebotcazou@adacore.com>
+	* configure.ac: Add -no-undefined for both 32- and 64-bit x86
+	windows-like hosts.
+	* configure: Rebuilt.
 
-	* src/sparc/v9.S (STACKFRAME): Bump to 176.
+2012-02-23  Anthony Green  <green@moxielogic.com>
 
+	* src/*/ffitarget.h: Ensure that users never include ffitarget.h
+	directly.
+
 2012-02-10  Kai Tietz  <ktietz@redhat.com>
 
 	* configure.ac (AM_LTLDFLAGS): Add -no-undefine for x64
 	windows target.
 	* configure: Regenerated.
-	
+
 2012-02-08  Kai Tietz  <ktietz@redhat.com>
 
 	* src/prep_cif.c (ffi_prep_cif): Allow for X86_WIN32
@@ -63,6 +62,20 @@
 	* testsuite/libffi.call/struct1_win32.c: New test.
 	* testsuite/libffi.call/struct2_win32.c: New test.
 
+2012-01-23  Uros Bizjak  <ubizjak@gmail.com>
+
+	* src/alpha/ffi.c (ffi_prep_closure_loc): Check for bad ABI.
+
+2012-01-23  Anthony Green  <green@moxielogic.com>
+	    Chris Young  <cdyoung@ntlworld.com>
+
+	* configure.ac: Add Amiga support.
+	* configure: Rebuilt.
+
+2012-01-23  Dmitry Nadezhin  <dmitry.nadezhin@gmail.com>
+
+	* include/ffi_common.h (LIKELY, UNLIKELY): Fix definitions.
+
 2012-01-23  Andreas Schwab  <schwab@linux-m68k.org>
 
 	* src/m68k/sysv.S (ffi_call_SYSV): Properly test for plain
@@ -87,6 +100,67 @@
 
 	* configure: Regenerate.
 
+2011-11-12  David Gilbert <david.gilbert@linaro.org>
+
+	* doc/libffi.texi, include/ffi.h.in, include/ffi_common.h,
+	man/Makefile.am, man/ffi.3, man/ffi_prep_cif.3,
+	man/ffi_prep_cif_var.3, src/arm/ffi.c, src/arm/ffitarget.h,
+	src/cris/ffi.c, src/prep_cif.c,
+	testsuite/libffi.call/cls_double_va.c,
+	testsuite/libffi.call/cls_longdouble_va.c,
+	testsuite/libffi.call/float_va.c: Many changes to support variadic
+	function calls.
+
+2011-11-12  Kyle Moffett <Kyle.D.Moffett@boeing.com>
+
+	* src/powerpc/ffi.c, src/powerpc/ffitarget.h,
+	src/powerpc/ppc_closure.S, src/powerpc/sysv.S: Many changes for
+	softfloat powerpc variants.
+
+2011-11-12  Petr Salinger <Petr.Salinger@seznam.cz>
+
+	* configure.ac (FFI_EXEC_TRAMPOLINE_TABLE): Fix kfreebsd support.
+	* configure: Rebuilt.
+
+2011-11-12  Timothy Wall  <twall@users.sf.net>
+
+	* src/arm/ffi.c (ffi_prep_args, ffi_prep_incoming_args_SYSV): Max
+	alignment of 4 for wince on ARM.
+
+2011-11-12  Kyle Moffett <Kyle.D.Moffett@boeing.com>
+	    Anthony Green <green@moxielogic.com>
+
+	* src/ppc/sysv.S, src/ppc/ffi.c: Remove use of ppc string
+	instructions (not available on some cores, like the PPC440).
+
+2011-11-12  Kimura Wataru  <kimuraw@i.nifty.jp>
+
+	* m4/ax_enable_builddir: Change from string comparison to numeric
+	comparison for wc output.
+	* configure.ac: Enable FFI_MMAP_EXEC_WRIT for darwin11 aka Mac OS
+	X 10.7.
+	* configure: Rebuilt.
+
+2011-11-12  Anthony Green  <green@moxielogic.com>
+
+	* Makefile.am (AM_CCASFLAGS): Add -g option to build assembly
+	files with debug info.
+	* Makefile.in: Rebuilt.
+
+2011-11-12  Jasper Lievisse Adriaanse <jasper@openbsd.org>
+
+	* README: Update list of supported OpenBSD systems.
+
+2011-11-12  Anthony Green  <green@moxielogic.com>
+
+	* libtool-version: Update.
+	* Makefile.am (nodist_libffi_la_SOURCES): Add src/debug.c if
+	FFI_DEBUG.
+	(libffi_la_SOURCES): Remove src/debug.c
+	(EXTRA_DIST): Add src/debug.c
+	* Makefile.in: Rebuilt.
+	* README: Update for 3.0.11.
+
 2011-11-10  Richard Henderson  <rth@redhat.com>
 
 	* configure.ac (GCC_AS_CFI_PSEUDO_OP): Use it instead of inline check.
@@ -135,10 +209,127 @@
 	Use them to handle ELF vs. ECOFF differences.
 	[__osf__] (_GLOBAL__F_ffi_call_osf): Define.
 
+2011-03-30  Timothy Wall  <twall@users.sf.net>
+
+	* src/powerpc/darwin.S: Fix unknown FDE encoding.
+	* src/powerpc/darwin_closure.S: ditto.
+
+2011-02-25  Anthony Green  <green@moxielogic.com>
+
+	* src/powerpc/ffi.c (ffi_prep_closure_loc): Allow for more
+	32-bit ABIs.
+
+2011-02-15  Anthony Green  <green@moxielogic.com>
+
+	* m4/ax_cc_maxopt.m4: Don't -malign-double or use -ffast-math.
+	* configure: Rebuilt.
+
 2011-02-13  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
 
 	* configure: Regenerate.
 
+2011-02-13  Anthony Green  <green@moxielogic.com>
+
+	* include/ffi_common.h (UNLIKELY, LIKELY): Define.
+	* src/x86/ffi64.c (UNLIKELY, LIKELY): Remove definition.
+	* src/prep_cif.c (UNLIKELY, LIKELY): Remove definition.
+
+	* src/prep_cif.c (initialize_aggregate): Convert assertion into
+	FFI_BAD_TYPEDEF return.  Initialize arg size and alignment to 0.
+
+	* src/pa/ffi.c (ffi_prep_closure_loc): Don't ASSERT ABI test,
+	just return FFI_BAD_ABI when things are wrong.
+	* src/arm/ffi.c (ffi_prep_closure_loc): Ditto.
+	* src/powerpc/ffi.c (ffi_prep_closure_loc): Ditto.
+	* src/mips/ffi.c (ffi_prep_closure_loc): Ditto.
+	* src/ia64/ffi.c (ffi_prep_closure_loc): Ditto.
+	* src/avr32/ffi.c (ffi_prep_closure_loc): Ditto.
+
+2011-02-11  Anthony Green  <green@moxielogic.com>
+
+	* src/sparc/ffi.c (ffi_prep_closure_loc): Don't ASSERT ABI test,
+	just return FFI_BAD_ABI when things are wrong.
+
+2011-02-09  Stuart Shelton  <srcshelton@gmail.com>
+
+	http://bugs.gentoo.org/show_bug.cgi?id=286911
+	* src/mips/ffitarget.h: Clean up error messages.
+	* src/java_raw_api.c (ffi_java_translate_args): Cast raw arg to
+	ffi_raw*.
+	* include/ffi.h.in: Add pragma for SGI compiler.
+
+2011-02-09  Anthony Green  <green@moxielogic.com>
+
+	* configure.ac: Add powerpc64-*-darwin* support.
+
+2011-02-09  Anthony Green <green@moxielogic.com>
+
+	* README: Mention Interix.
+
+2011-02-09  Jonathan Callen  <abcd@gentoo.org>
+
+	* configure.ac: Add Interix to win32/cygwin/mingw case.
+	* configure: Ditto.
+	* src/closures.c: Treat Interix like Cygwin, instead of as a
+	generic win32.
+
+2011-02-09  Anthony Green <green@moxielogic.com>
+
+	* testsuite/libffi.call/err_bad_typedef.c: Remove xfail.
+	* testsuite/libffi.call/err_bad_abi.c: Remove xfail.
+	* src/x86/ffi64.c (UNLIKELY, LIKELY): Define.
+	(ffi_prep_closure_loc): Check for bad ABI.
+	* src/prep_cif.c (UNLIKELY, LIKELY): Define.
+	(initialize_aggregate): Check for bad types.
+
+2011-02-09  Landon Fuller <landonf@plausible.coop>
+
+	* Makefile.am (EXTRA_DIST): Add build-ios.sh, src/arm/gentramp.sh,
+	src/arm/trampoline.S.
+	(nodist_libffi_la_SOURCES): Add src/arc/trampoline.S.
+	* configure.ac (FFI_EXEC_TRAMPOLINE_TABLE): Define.
+	* src/arm/ffi.c (ffi_trampoline_table)
+	(ffi_closure_trampoline_table_page, ffi_trampoline_table_entry)
+	(FFI_TRAMPOLINE_CODELOC_CONFIG, FFI_TRAMPOLINE_CONFIG_PAGE_OFFSET)
+	(FFI_TRAMPOLINE_COUNT, ffi_trampoline_lock, ffi_trampoline_tables)
+	(ffi_trampoline_table_alloc, ffi_closure_alloc, ffi_closure_free):
+	Define for FFI_EXEC_TRAMPOLINE_TABLE case (iOS).
+	(ffi_prep_closure_loc): Handl FFI_EXEC_TRAMPOLINE_TABLE case
+	separately.
+	* src/arm/sysv.S: Handle Apple iOS host.
+	* src/closures.c: Handle FFI_EXEC_TRAMPOLINE_TABLE case.
+	* build-ios.sh: New file.
+	* fficonfig.h.in, configure, Makefile.in: Rebuilt.
+	* README: Mention ARM iOS.
+
+2011-02-08  Oren Held  <orenhe@il.ibm.com>
+
+	* src/dlmalloc.c (_STRUCT_MALLINFO): Define in order to avoid
+	redefinition of mallinfo on HP-UX.
+
+2011-02-08  Ginn Chen  <ginn.chen@oracle.com>
+
+	* src/sparc/ffi.c (ffi_call): Make compatible with Solaris Studio
+	aggregate return ABI.  Flush cache.
+	(ffi_prep_closure_loc): Flush cache.
+
+2011-02-11  Anthony Green  <green@moxielogic.com>
+
+	From Tom Honermann <tom.honermann@oracle.com>:
+	* src/powerpc/aix.S (ffi_call_AIX): Support for xlc toolchain on
+	AIX.  Declare .ffi_prep_args.  Insert nops after branch
+	instructions so that the AIX linker can insert TOC reload
+	instructions.
+	* src/powerpc/aix_closure.S: Declare .ffi_closure_helper_DARWIN.
+
+2011-02-08  Ed  <ed@kdtc.net>
+
+	* src/powerpc/asm.h: Fix grammar nit in comment.
+
+2011-02-08  Uli Link  <ul.mcamafia@linkitup.de>
+
+	* include/ffi.h.in (FFI_64_BIT_MAX): Define and use.
+
 2011-02-09  Rainer Orth  <ro@CeBiTec.Uni-Bielefeld.DE>
 
 	PR libffi/46661
@@ -146,6 +337,11 @@
 	uintptr_t first.
 	* testsuite/libffi.call/cls_pointer_stack.c (main): Likewise.
 
+2011-02-08  Rafael Avila de Espindola  <respindola@mozilla.com>
+
+	* configure.ac: Fix x86 test for pc related relocs.
+	* configure: Rebuilt.
+
 2011-02-07  Joel Sherrill <joel.sherrill@oarcorp.com>
 
 	* libffi/src/m68k/ffi.c: Add RTEMS support for cache flushing.
@@ -204,6 +400,13 @@
 	(.eh_frame): Use FDE_ENCODING.
 	(.LASFDE1, .LASFDE2, LASFDE3): Simplify with FDE_ENCODE.
 
+2010-11-22  Jacek Caban <jacek@codeweavers.com>
+
+	* configure.ac: Check for symbol underscores on mingw-w64.
+	* configure: Rebuilt.
+	* src/x86/win64.S: Correctly access extern symbols in respect to
+	underscores.
+
 2010-11-15  Rainer Orth  <ro@CeBiTec.Uni-Bielefeld.DE>
 
 	* testsuite/lib/libffi-dg.exp: Rename ...
@@ -271,6 +474,31 @@
 	* testsuite/libffi.call/cls_longdouble.c: Likewise.
 	* testsuite/libffi.call/huge_struct.c: Likewise.
 
+2010-08-05  Dan Witte  <dwitte@mozilla.com>
+
+        * Makefile.am: Pass FFI_DEBUG define to msvcc.sh for linking to the
+        debug CRT when --enable-debug is given.
+        * configure.ac: Define it.
+        * msvcc.sh: Translate -g and -DFFI_DEBUG appropriately.
+
+2010-08-04  Dan Witte  <dwitte@mozilla.com>
+
+	* src/x86/ffitarget.h: Add X86_ANY define for all x86/x86_64
+	platforms.
+	* src/x86/ffi.c: Remove redundant ifdef checks.
+	* src/prep_cif.c: Push stack space computation into src/x86/ffi.c
+	for X86_ANY so return value space doesn't get added twice.
+
+2010-08-03  Neil Rashbrooke <neil@parkwaycc.co.uk>
+
+	* msvcc.sh: Don't pass -safeseh to ml64 because behavior is buggy.
+
+2010-07-22  Dan Witte  <dwitte@mozilla.com>
+
+	* src/*/ffitarget.h: Make FFI_LAST_ABI one past the last valid ABI.
+	* src/prep_cif.c: Fix ABI assertion.
+        * src/cris/ffi.c: Ditto.
+
 2010-07-10  Evan Phoenix  <evan@fallingsnow.net>
 
 	* src/closures.c (selinux_enabled_check): Fix strncmp usage bug.
@@ -302,6 +530,14 @@
 	* fficonfig.h.in: Regenerate.
 	* src/x86/sysv.S (.eh_frame): Use .ascii, .string or error.
 
+2010-05-11  Dan Witte  <dwitte@mozilla.com>
+
+	* doc/libffi.tex: Document previous change.
+
+2010-05-11  Makoto Kato <m_kato@ga2.so-net.ne.jp>
+
+	* src/x86/ffi.c (ffi_call): Don't copy structs passed by value.
+
 2010-05-05  Michael Kohler <michaelkohler@live.com>
 
 	* src/dlmalloc.c (dlfree): Fix spelling.
@@ -337,6 +573,11 @@
 	* man/Makefile.in: Regenerate.
 	* testsuite/Makefile.in: Regenerate.
 
+2010-03-30  Dan Witte  <dwitte@mozilla.com>
+
+	* msvcc.sh: Disable build warnings.
+	* README (tested): Clarify windows build procedure.
+
 2010-03-15  Rainer Orth  <ro@CeBiTec.Uni-Bielefeld.DE>
 
 	* configure.ac (libffi_cv_as_x86_64_unwind_section_type): New test.
@@ -711,6 +952,11 @@
 	* man/Makefile.in: Regenerate.
 	* testsuite/Makefile.in: Regenerate.
 
+2011-08-22  Jasper Lievisse Adriaanse <jasper@openbsd.org>
+
+	* configure.ac: Add OpenBSD/hppa and OpenBSD/powerpc support.
+	* configure: Rebuilt.
+
 2009-07-30  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
 
 	* configure.ac (_AC_ARG_VAR_PRECIOUS): Use m4_rename_force.
Index: src/arm/ffi.c
===================================================================
--- src/arm/ffi.c	(revision 184894)
+++ src/arm/ffi.c	(working copy)
@@ -1,6 +1,10 @@
 /* -----------------------------------------------------------------------
-   ffi.c - Copyright (c) 1998, 2008  Red Hat, Inc.
-   
+   ffi.c - Copyright (c) 2011 Timothy Wall
+           Copyright (c) 2011 Plausible Labs Cooperative, Inc.
+           Copyright (c) 2011 Anthony Green
+	   Copyright (c) 2011 Free Software Foundation
+           Copyright (c) 1998, 2008, 2011  Red Hat, Inc.
+	   
    ARM Foreign Function Interface 
 
    Permission is hereby granted, free of charge, to any person obtaining
@@ -61,6 +65,7 @@
        i--, p_arg++)
     {
       size_t z;
+      size_t alignment;
 
       /* Allocated in VFP registers. */
       if (ecif->cif->abi == FFI_VFP
@@ -78,8 +83,13 @@
 	}
 
       /* Align if necessary */
-      if (((*p_arg)->alignment - 1) & (unsigned) argp) {
-	argp = (char *) ALIGN(argp, (*p_arg)->alignment);
+      alignment = (*p_arg)->alignment;
+#ifdef _WIN32_WCE
+      if (alignment > 4)
+	alignment = 4;
+#endif
+      if ((alignment - 1) & (unsigned) argp) {
+	argp = (char *) ALIGN(argp, alignment);
       }
 
       if ((*p_arg)->type == FFI_TYPE_STRUCT)
@@ -186,6 +196,18 @@
   return FFI_OK;
 }
 
+/* Perform machine dependent cif processing for variadic calls */
+ffi_status ffi_prep_cif_machdep_var(ffi_cif *cif,
+				    unsigned int nfixedargs,
+				    unsigned int ntotalargs)
+{
+  /* VFP variadic calls actually use the SYSV ABI */
+  if (cif->abi == FFI_VFP)
+	cif->abi = FFI_SYSV;
+
+  return ffi_prep_cif_machdep(cif);
+}
+
 /* Prototypes for assembly functions, in sysv.S */
 extern void ffi_call_SYSV (void (*fn)(void), extended_cif *, unsigned, unsigned, unsigned *);
 extern void ffi_call_VFP (void (*fn)(void), extended_cif *, unsigned, unsigned, unsigned *);
@@ -317,6 +339,11 @@
       alignment = (*p_arg)->alignment;
       if (alignment < 4)
 	alignment = 4;
+#ifdef _WIN32_WCE
+      else
+	if (alignment > 4)
+	  alignment = 4;
+#endif
       /* Align if necessary */
       if ((alignment - 1) & (unsigned) argp) {
 	argp = (char *) ALIGN(argp, alignment);
@@ -339,6 +366,220 @@
 
 extern unsigned int ffi_arm_trampoline[3];
 
+#if FFI_EXEC_TRAMPOLINE_TABLE
+
+#include <mach/mach.h>
+#include <pthread.h>
+#include <stdio.h>
+#include <stdlib.h>
+
+extern void *ffi_closure_trampoline_table_page;
+
+typedef struct ffi_trampoline_table ffi_trampoline_table;
+typedef struct ffi_trampoline_table_entry ffi_trampoline_table_entry;
+
+struct ffi_trampoline_table {
+  /* contigious writable and executable pages */
+  vm_address_t config_page;
+  vm_address_t trampoline_page;
+
+  /* free list tracking */
+  uint16_t free_count;
+  ffi_trampoline_table_entry *free_list;
+  ffi_trampoline_table_entry *free_list_pool;
+
+  ffi_trampoline_table *prev;
+  ffi_trampoline_table *next;
+};
+
+struct ffi_trampoline_table_entry {
+  void *(*trampoline)();
+  ffi_trampoline_table_entry *next;
+};
+
+/* Override the standard architecture trampoline size */
+// XXX TODO - Fix
+#undef FFI_TRAMPOLINE_SIZE
+#define FFI_TRAMPOLINE_SIZE 12
+
+/* The trampoline configuration is placed at 4080 bytes prior to the trampoline's entry point */
+#define FFI_TRAMPOLINE_CODELOC_CONFIG(codeloc) ((void **) (((uint8_t *) codeloc) - 4080));
+
+/* The first 16 bytes of the config page are unused, as they are unaddressable from the trampoline page. */
+#define FFI_TRAMPOLINE_CONFIG_PAGE_OFFSET 16
+
+/* Total number of trampolines that fit in one trampoline table */
+#define FFI_TRAMPOLINE_COUNT ((PAGE_SIZE - FFI_TRAMPOLINE_CONFIG_PAGE_OFFSET) / FFI_TRAMPOLINE_SIZE)
+
+static pthread_mutex_t ffi_trampoline_lock = PTHREAD_MUTEX_INITIALIZER;
+static ffi_trampoline_table *ffi_trampoline_tables = NULL;
+
+static ffi_trampoline_table *
+ffi_trampoline_table_alloc ()
+{
+  ffi_trampoline_table *table = NULL;
+
+  /* Loop until we can allocate two contigious pages */
+  while (table == NULL) {
+    vm_address_t config_page = 0x0;
+    kern_return_t kt;
+
+    /* Try to allocate two pages */
+    kt = vm_allocate (mach_task_self (), &config_page, PAGE_SIZE*2, VM_FLAGS_ANYWHERE);
+    if (kt != KERN_SUCCESS) {
+      fprintf(stderr, "vm_allocate() failure: %d at %s:%d\n", kt, __FILE__, __LINE__);
+      break;
+    }
+
+    /* Now drop the second half of the allocation to make room for the trampoline table */
+    vm_address_t trampoline_page = config_page+PAGE_SIZE;
+    kt = vm_deallocate (mach_task_self (), trampoline_page, PAGE_SIZE);
+    if (kt != KERN_SUCCESS) {
+      fprintf(stderr, "vm_deallocate() failure: %d at %s:%d\n", kt, __FILE__, __LINE__);
+      break;
+    }
+
+    /* Remap the trampoline table to directly follow the config page */
+    vm_prot_t cur_prot;
+    vm_prot_t max_prot;
+
+    kt = vm_remap (mach_task_self (), &trampoline_page, PAGE_SIZE, 0x0, FALSE, mach_task_self (), (vm_address_t) &ffi_closure_trampoline_table_page, FALSE, &cur_prot, &max_prot, VM_INHERIT_SHARE);
+
+    /* If we lost access to the destination trampoline page, drop our config allocation mapping and retry */
+    if (kt != KERN_SUCCESS) {
+      /* Log unexpected failures */
+      if (kt != KERN_NO_SPACE) {
+        fprintf(stderr, "vm_remap() failure: %d at %s:%d\n", kt, __FILE__, __LINE__);
+      }
+
+      vm_deallocate (mach_task_self (), config_page, PAGE_SIZE);
+      continue;
+    }
+
+    /* We have valid trampoline and config pages */
+    table = calloc (1, sizeof(ffi_trampoline_table));
+    table->free_count = FFI_TRAMPOLINE_COUNT;
+    table->config_page = config_page;
+    table->trampoline_page = trampoline_page;
+
+    /* Create and initialize the free list */
+    table->free_list_pool = calloc(FFI_TRAMPOLINE_COUNT, sizeof(ffi_trampoline_table_entry));
+
+    uint16_t i;
+    for (i = 0; i < table->free_count; i++) {
+      ffi_trampoline_table_entry *entry = &table->free_list_pool[i];
+      entry->trampoline = (void *) (table->trampoline_page + (i * FFI_TRAMPOLINE_SIZE));
+
+      if (i < table->free_count - 1)
+        entry->next = &table->free_list_pool[i+1];
+    }
+
+    table->free_list = table->free_list_pool;
+  }
+
+  return table;
+}
+
+void *
+ffi_closure_alloc (size_t size, void **code)
+{
+  /* Create the closure */
+  ffi_closure *closure = malloc(size);
+  if (closure == NULL)
+    return NULL;
+
+  pthread_mutex_lock(&ffi_trampoline_lock);
+
+  /* Check for an active trampoline table with available entries. */
+  ffi_trampoline_table *table = ffi_trampoline_tables;
+  if (table == NULL || table->free_list == NULL) {
+    table = ffi_trampoline_table_alloc ();
+    if (table == NULL) {
+      free(closure);
+      return NULL;
+    }
+
+    /* Insert the new table at the top of the list */
+    table->next = ffi_trampoline_tables;
+    if (table->next != NULL)
+        table->next->prev = table;
+
+    ffi_trampoline_tables = table;
+  }
+
+  /* Claim the free entry */
+  ffi_trampoline_table_entry *entry = ffi_trampoline_tables->free_list;
+  ffi_trampoline_tables->free_list = entry->next;
+  ffi_trampoline_tables->free_count--;
+  entry->next = NULL;
+
+  pthread_mutex_unlock(&ffi_trampoline_lock);
+
+  /* Initialize the return values */
+  *code = entry->trampoline;
+  closure->trampoline_table = table;
+  closure->trampoline_table_entry = entry;
+
+  return closure;
+}
+
+void
+ffi_closure_free (void *ptr)
+{
+  ffi_closure *closure = ptr;
+
+  pthread_mutex_lock(&ffi_trampoline_lock);
+
+  /* Fetch the table and entry references */
+  ffi_trampoline_table *table = closure->trampoline_table;
+  ffi_trampoline_table_entry *entry = closure->trampoline_table_entry;
+
+  /* Return the entry to the free list */
+  entry->next = table->free_list;
+  table->free_list = entry;
+  table->free_count++;
+
+  /* If all trampolines within this table are free, and at least one other table exists, deallocate
+   * the table */
+  if (table->free_count == FFI_TRAMPOLINE_COUNT && ffi_trampoline_tables != table) {
+    /* Remove from the list */
+    if (table->prev != NULL)
+      table->prev->next = table->next;
+
+    if (table->next != NULL)
+      table->next->prev = table->prev;
+
+    /* Deallocate pages */
+    kern_return_t kt;
+    kt = vm_deallocate (mach_task_self (), table->config_page, PAGE_SIZE);
+    if (kt != KERN_SUCCESS)
+      fprintf(stderr, "vm_deallocate() failure: %d at %s:%d\n", kt, __FILE__, __LINE__);
+
+    kt = vm_deallocate (mach_task_self (), table->trampoline_page, PAGE_SIZE);
+    if (kt != KERN_SUCCESS)
+      fprintf(stderr, "vm_deallocate() failure: %d at %s:%d\n", kt, __FILE__, __LINE__);
+
+    /* Deallocate free list */
+    free (table->free_list_pool);
+    free (table);
+  } else if (ffi_trampoline_tables != table) {
+    /* Otherwise, bump this table to the top of the list */
+    table->prev = NULL;
+    table->next = ffi_trampoline_tables;
+    if (ffi_trampoline_tables != NULL)
+      ffi_trampoline_tables->prev = table;
+
+    ffi_trampoline_tables = table;
+  }
+
+  pthread_mutex_unlock (&ffi_trampoline_lock);
+
+  /* Free the closure */
+  free (closure);
+}
+
+#else
+
 #define FFI_INIT_TRAMPOLINE(TRAMP,FUN,CTX)				\
 ({ unsigned char *__tramp = (unsigned char*)(TRAMP);			\
    unsigned int  __fun = (unsigned int)(FUN);				\
@@ -353,6 +594,7 @@
                                                     mapping.  */        \
  })
 
+#endif
 
 /* the cif must already be prep'ed */
 
@@ -370,12 +612,18 @@
   else if (cif->abi == FFI_VFP)
     closure_func = &ffi_closure_VFP;
   else
-    FFI_ASSERT (0);
+    return FFI_BAD_ABI;
     
+#if FFI_EXEC_TRAMPOLINE_TABLE
+  void **config = FFI_TRAMPOLINE_CODELOC_CONFIG(codeloc);
+  config[0] = closure;
+  config[1] = closure_func;
+#else
   FFI_INIT_TRAMPOLINE (&closure->tramp[0], \
 		       closure_func,  \
 		       codeloc);
-    
+#endif
+
   closure->cif  = cif;
   closure->user_data = user_data;
   closure->fun  = fun;
Index: src/arm/sysv.S
===================================================================
--- src/arm/sysv.S	(revision 184894)
+++ src/arm/sysv.S	(working copy)
@@ -1,5 +1,6 @@
 /* -----------------------------------------------------------------------
-   sysv.S - Copyright (c) 1998, 2008 Red Hat, Inc.
+   sysv.S - Copyright (c) 1998, 2008, 2011 Red Hat, Inc.
+	    Copyright (c) 2011 Plausible Labs Cooperative, Inc.
    
    ARM Foreign Function Interface 
 
@@ -39,7 +40,11 @@
 #else
 #define CNAME(x) x
 #endif
+#ifdef __APPLE__
+#define ENTRY(x) .globl CNAME(x); CNAME(x):
+#else
 #define ENTRY(x) .globl CNAME(x); .type CNAME(x),%function; CNAME(x):
+#endif /* __APPLE__ */
 #endif
 
 #ifdef __ELF__
@@ -48,6 +53,12 @@
 #define LSYM(x) x
 #endif
 
+/* Use the SOFTFP return value ABI on Mac OS X, as per the iOS ABI
+  Function Call Guide */
+#ifdef __APPLE__
+#define __SOFTFP__
+#endif
+
 /* We need a better way of testing for this, but for now, this is all 
    we can do.  */
 @ This selects the minimum architecture level required.
@@ -105,21 +116,33 @@
 	.align 0
 	.thumb
 	.thumb_func
+#ifdef __APPLE__
+	ENTRY($0)
+#else
 	ENTRY(\name)
+#endif
 	bx	pc
 	nop
 	.arm
 	UNWIND .fnstart
 /* A hook to tell gdb that we've switched to ARM mode.  Also used to call
    directly from other local arm routines.  */
-_L__\name:		
+#ifdef __APPLE__
+_L__$0:
+#else
+_L__\name:
+#endif
 .endm
 #else
 .macro	ARM_FUNC_START name
 	.text
 	.align 0
 	.arm
+#ifdef __APPLE__
+	ENTRY($0)
+#else
 	ENTRY(\name)
+#endif
 	UNWIND .fnstart
 .endm
 #endif
@@ -141,8 +164,7 @@
 #endif
 .endm
 
-
-	@ r0:   fn
+	@ r0:   ffi_prep_args
 	@ r1:   &ecif
 	@ r2:   cif->bytes
 	@ r3:   fig->flags
@@ -222,11 +244,18 @@
 #endif
 
 LSYM(Lepilogue):
-	RETLDM	"r0-r3,fp"
+#if defined (__INTERWORKING__)
+	ldmia   sp!, {r0-r3,fp, lr}
+	bx	lr
+#else
+	ldmia   sp!, {r0-r3,fp, pc}
+#endif
 
 .ffi_call_SYSV_end:
 	UNWIND .fnend
+#ifdef __ELF__
         .size    CNAME(ffi_call_SYSV),.ffi_call_SYSV_end-CNAME(ffi_call_SYSV)
+#endif
 
 
 /*
@@ -247,7 +276,7 @@
 	sub	sp, sp, #16
 	str	sp, [sp, #8]
 	add	r1, sp, #8
-	bl	ffi_closure_SYSV_inner
+	bl	CNAME(ffi_closure_SYSV_inner)
 	cmp	r0, #FFI_TYPE_INT
 	beq	.Lretint
 
@@ -299,7 +328,9 @@
 
 .ffi_closure_SYSV_end:
 	UNWIND .fnend
+#ifdef __ELF__
         .size    CNAME(ffi_closure_SYSV),.ffi_closure_SYSV_end-CNAME(ffi_closure_SYSV)
+#endif
 
 
 /* Below are VFP hard-float ABI call and closure implementations.
@@ -371,7 +402,7 @@
 	@ assume no return value.
 	cmp	r2, #0
 	beq	LSYM(Lepilogue_vfp)
-	
+
 	cmp	r3, #FFI_TYPE_INT
 	streq	r0, [r2]
 	beq	LSYM(Lepilogue_vfp)
Index: src/arm/gentramp.sh
===================================================================
--- src/arm/gentramp.sh	(revision 0)
+++ src/arm/gentramp.sh	(revision 0)
@@ -0,0 +1,118 @@
+#!/bin/sh
+
+# -----------------------------------------------------------------------
+#  gentramp.sh - Copyright (c) 2010, Plausible Labs Cooperative, Inc.
+#  
+#  ARM Trampoline Page Generator
+#
+#  Permission is hereby granted, free of charge, to any person obtaining
+#  a copy of this software and associated documentation files (the
+#  ``Software''), to deal in the Software without restriction, including
+#  without limitation the rights to use, copy, modify, merge, publish,
+#  distribute, sublicense, and/or sell copies of the Software, and to
+#  permit persons to whom the Software is furnished to do so, subject to
+#  the following conditions:
+#
+#  The above copyright notice and this permission notice shall be included
+#  in all copies or substantial portions of the Software.
+#
+#  THE SOFTWARE IS PROVIDED ``AS IS'', WITHOUT WARRANTY OF ANY KIND,
+#  EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+#  MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+#  NONINFRINGEMENT.  IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+#  HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+#  WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+#  OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
+#  DEALINGS IN THE SOFTWARE.
+#  -----------------------------------------------------------------------
+
+PROGNAME=$0
+
+# Each trampoline is exactly 3 instructions, or 12 bytes. If any of these values change,
+# the entire arm trampoline implementation must be updated to match, too.
+
+# Size of an individual trampoline, in bytes
+TRAMPOLINE_SIZE=12
+
+# Page size, in bytes
+PAGE_SIZE=4096
+
+# Compute the size of the reachable config page; The first 16 bytes of the config page
+# are unreachable due to our maximum pc-relative ldr offset.
+PAGE_AVAIL=`expr $PAGE_SIZE - 16`
+
+# Compute the number of of available trampolines. 
+TRAMPOLINE_COUNT=`expr $PAGE_AVAIL / $TRAMPOLINE_SIZE`
+
+header () {
+    echo "# GENERATED CODE - DO NOT EDIT"
+    echo "# This file was generated by $PROGNAME"
+    echo ""
+
+    # Write out the license header
+cat << EOF
+#  Copyright (c) 2010, Plausible Labs Cooperative, Inc.
+#  
+#  Permission is hereby granted, free of charge, to any person obtaining
+#  a copy of this software and associated documentation files (the
+#  ``Software''), to deal in the Software without restriction, including
+#  without limitation the rights to use, copy, modify, merge, publish,
+#  distribute, sublicense, and/or sell copies of the Software, and to
+#  permit persons to whom the Software is furnished to do so, subject to
+#  the following conditions:
+#
+#  The above copyright notice and this permission notice shall be included
+#  in all copies or substantial portions of the Software.
+#
+#  THE SOFTWARE IS PROVIDED ``AS IS'', WITHOUT WARRANTY OF ANY KIND,
+#  EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+#  MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+#  NONINFRINGEMENT.  IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+#  HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+#  WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+#  OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
+#  DEALINGS IN THE SOFTWARE.
+#  -----------------------------------------------------------------------
+
+EOF
+
+    # Write out the trampoline table, aligned to the page boundary
+    echo ".text"
+    echo ".align 12"
+    echo ".globl _ffi_closure_trampoline_table_page"
+    echo "_ffi_closure_trampoline_table_page:"
+}
+
+
+# WARNING - Don't modify the trampoline code size without also updating the relevent libffi code
+trampoline () {
+    cat << END
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+END
+}
+
+main () {
+    # Write out the header
+    header
+
+    # Write out the trampolines
+    local i=0
+    while [ $i -lt ${TRAMPOLINE_COUNT} ]; do
+        trampoline
+        local i=`expr $i + 1`
+    done
+}
+
+main

Property changes on: src/arm/gentramp.sh
___________________________________________________________________
Added: svn:executable
   + *

Index: src/arm/trampoline.S
===================================================================
--- src/arm/trampoline.S	(revision 0)
+++ src/arm/trampoline.S	(revision 0)
@@ -0,0 +1,4450 @@
+# GENERATED CODE - DO NOT EDIT
+# This file was generated by ./gentramp.sh
+
+#  Copyright (c) 2010, Plausible Labs Cooperative, Inc.
+#  
+#  Permission is hereby granted, free of charge, to any person obtaining
+#  a copy of this software and associated documentation files (the
+#  Software''), to deal in the Software without restriction, including
+#  without limitation the rights to use, copy, modify, merge, publish,
+#  distribute, sublicense, and/or sell copies of the Software, and to
+#  permit persons to whom the Software is furnished to do so, subject to
+#  the following conditions:
+#
+#  The above copyright notice and this permission notice shall be included
+#  in all copies or substantial portions of the Software.
+#
+#  THE SOFTWARE IS PROVIDED AS IS'', WITHOUT WARRANTY OF ANY KIND,
+#  EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+#  MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+#  NONINFRINGEMENT.  IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+#  HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+#  WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+#  OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
+#  DEALINGS IN THE SOFTWARE.
+#  -----------------------------------------------------------------------
+
+.text
+.align 12
+.globl _ffi_closure_trampoline_table_page
+_ffi_closure_trampoline_table_page:
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
+
+    // trampoline
+    // Save to stack
+    stmfd sp!, {r0-r3}
+
+    // Load the context argument from the config page.
+    // This places the first usable config value at _ffi_closure_trampoline_table-4080
+    // This accounts for the above 4-byte stmfd instruction, plus 8 bytes constant when loading from pc.
+    ldr r0, [pc, #-4092]
+
+    // Load the jump address from the config page.
+    ldr pc, [pc, #-4092]
+
Index: src/arm/ffitarget.h
===================================================================
--- src/arm/ffitarget.h	(revision 184894)
+++ src/arm/ffitarget.h	(working copy)
@@ -1,6 +1,7 @@
 /* -----------------------------------------------------------------*-C-*-
-   ffitarget.h - Copyright (c) 1996-2003  Red Hat, Inc.
-                 Copyright (c) 2010 CodeSourcery
+   ffitarget.h - Copyright (c) 2012  Anthony Green
+                 Copyright (c) 2010  CodeSourcery
+                 Copyright (c) 1996-2003  Red Hat, Inc.
 
    Target configuration macros for ARM.
 
@@ -29,6 +30,10 @@
 #ifndef LIBFFI_TARGET_H
 #define LIBFFI_TARGET_H
 
+#ifndef LIBFFI_H
+#error "Please do not include ffitarget.h directly into your source.  Use ffi.h instead."
+#endif
+
 #ifndef LIBFFI_ASM
 typedef unsigned long          ffi_arg;
 typedef signed long            ffi_sarg;
@@ -55,6 +60,8 @@
 #define FFI_TYPE_STRUCT_VFP_FLOAT  (FFI_TYPE_LAST + 1)
 #define FFI_TYPE_STRUCT_VFP_DOUBLE (FFI_TYPE_LAST + 2)
 
+#define FFI_TARGET_SPECIFIC_VARIADIC
+
 /* ---- Definitions for closures ----------------------------------------- */
 
 #define FFI_CLOSURES 1
@@ -62,4 +69,3 @@
 #define FFI_NATIVE_RAW_API 0
 
 #endif
-
Index: src/powerpc/aix_closure.S
===================================================================
--- src/powerpc/aix_closure.S	(revision 184894)
+++ src/powerpc/aix_closure.S	(working copy)
@@ -79,6 +79,8 @@
 	.set f20,20
 	.set f21,21
 
+	.extern .ffi_closure_helper_DARWIN
+
 #define LIBFFI_ASM
 #define JUMPTARGET(name) name
 #define L(x) x
Index: src/powerpc/ppc_closure.S
===================================================================
--- src/powerpc/ppc_closure.S	(revision 184894)
+++ src/powerpc/ppc_closure.S	(working copy)
@@ -122,22 +122,41 @@
 	blr
 
 # case FFI_TYPE_FLOAT
+#ifndef __NO_FPRS__
 	lfs %f1,112+0(%r1)
 	mtlr %r0
 	addi %r1,%r1,144
+#else
+	nop
+	nop
+	nop
+#endif
 	blr
 
 # case FFI_TYPE_DOUBLE
+#ifndef __NO_FPRS__
 	lfd %f1,112+0(%r1)
 	mtlr %r0
 	addi %r1,%r1,144
+#else
+	nop
+	nop
+	nop
+#endif
 	blr
 
 # case FFI_TYPE_LONGDOUBLE
+#ifndef __NO_FPRS__
 	lfd %f1,112+0(%r1)
 	lfd %f2,112+8(%r1)
 	mtlr %r0
 	b .Lfinish
+#else
+	nop
+	nop
+	nop
+	blr
+#endif
 
 # case FFI_TYPE_UINT8
 	lbz %r3,112+3(%r1)
Index: src/powerpc/darwin_closure.S
===================================================================
--- src/powerpc/darwin_closure.S	(revision 184894)
+++ src/powerpc/darwin_closure.S	(working copy)
@@ -484,7 +484,7 @@
 	.byte	EH_DATA_ALIGN_FACT ; sleb128 -4; CIE Data Alignment Factor
 	.byte	0x41	; CIE RA Column
 	.byte	0x1	; uleb128 0x1; Augmentation size
-	.byte	0x90	; FDE Encoding (indirect pcrel)
+	.byte	0x10	; FDE Encoding (indirect pcrel)
 	.byte	0xc	; DW_CFA_def_cfa
 	.byte	0x1	; uleb128 0x1
 	.byte	0x0	; uleb128 0x0
Index: src/powerpc/ffitarget.h
===================================================================
--- src/powerpc/ffitarget.h	(revision 184894)
+++ src/powerpc/ffitarget.h	(working copy)
@@ -1,6 +1,8 @@
 /* -----------------------------------------------------------------*-C-*-
-   ffitarget.h - Copyright (c) 1996-2003  Red Hat, Inc.
-   Copyright (C) 2007, 2008, 2010 Free Software Foundation, Inc
+   ffitarget.h - Copyright (c) 2012  Anthony Green
+                 Copyright (C) 2007, 2008, 2010 Free Software Foundation, Inc
+                 Copyright (c) 1996-2003  Red Hat, Inc.
+
    Target configuration macros for PowerPC.
 
    Permission is hereby granted, free of charge, to any person obtaining
@@ -28,6 +30,10 @@
 #ifndef LIBFFI_TARGET_H
 #define LIBFFI_TARGET_H
 
+#ifndef LIBFFI_H
+#error "Please do not include ffitarget.h directly into your source.  Use ffi.h instead."
+#endif
+
 /* ---- System specific configurations ----------------------------------- */
 
 #if defined (POWERPC) && defined (__powerpc64__)	/* linux64 */
@@ -60,18 +66,14 @@
   FFI_LINUX64,
   FFI_LINUX,
   FFI_LINUX_SOFT_FLOAT,
-# ifdef POWERPC64
+# if defined(POWERPC64)
   FFI_DEFAULT_ABI = FFI_LINUX64,
+# elif defined(__NO_FPRS__)
+  FFI_DEFAULT_ABI = FFI_LINUX_SOFT_FLOAT,
+# elif (__LDBL_MANT_DIG__ == 106)
+  FFI_DEFAULT_ABI = FFI_LINUX,
 # else
-#  if (!defined(__NO_FPRS__) && (__LDBL_MANT_DIG__ == 106))
-  FFI_DEFAULT_ABI = FFI_LINUX,
-#  else
-#   ifdef __NO_FPRS__
-  FFI_DEFAULT_ABI = FFI_LINUX_SOFT_FLOAT,
-#   else
   FFI_DEFAULT_ABI = FFI_GCC_SYSV,
-#   endif
-#  endif
 # endif
 #endif
 
Index: src/powerpc/aix.S
===================================================================
--- src/powerpc/aix.S	(revision 184894)
+++ src/powerpc/aix.S	(working copy)
@@ -1,5 +1,5 @@
 /* -----------------------------------------------------------------------
-   aix.S - Copyright (c) 2002,2009 Free Software Foundation, Inc.
+   aix.S - Copyright (c) 2002, 2009 Free Software Foundation, Inc.
    based on darwin.S by John Hornkvist
 
    PowerPC Assembly glue.
@@ -79,6 +79,8 @@
 	.set f20,20
 	.set f21,21
 
+	.extern .ffi_prep_args
+
 #define LIBFFI_ASM
 #include <fficonfig.h>
 #include <ffi.h>
@@ -125,6 +127,7 @@
 	/* Call ffi_prep_args.  */
 	mr	r4, r1
 	bl	.ffi_prep_args
+	nop
 
 	/* Now do the call.  */
 	ld	r0, 0(r29)
@@ -226,6 +229,7 @@
 	/* Call ffi_prep_args.  */
 	mr	r4, r1
 	bl	.ffi_prep_args
+	nop
 
 	/* Now do the call.  */
 	lwz	r0, 0(r29)
Index: src/powerpc/darwin.S
===================================================================
--- src/powerpc/darwin.S	(revision 184894)
+++ src/powerpc/darwin.S	(working copy)
@@ -335,7 +335,7 @@
 	.byte	EH_DATA_ALIGN_FACT ; sleb128 -4; CIE Data Alignment Factor
 	.byte	0x41	; CIE RA Column
 	.byte	0x1	; uleb128 0x1; Augmentation size
-	.byte	0x90	; FDE Encoding (indirect pcrel)
+	.byte	0x10	; FDE Encoding (indirect pcrel)
 	.byte	0xc	; DW_CFA_def_cfa
 	.byte	0x1	; uleb128 0x1
 	.byte	0x0	; uleb128 0x0
Index: src/powerpc/ffi.c
===================================================================
--- src/powerpc/ffi.c	(revision 184894)
+++ src/powerpc/ffi.c	(working copy)
@@ -1,7 +1,9 @@
 /* -----------------------------------------------------------------------
-   ffi.c - Copyright (c) 1998 Geoffrey Keating
-   Copyright (C) 2007, 2008 Free Software Foundation, Inc
-   Copyright (C) 2008 Red Hat, Inc
+   ffi.c - Copyright (C) 2011 Anthony Green
+           Copyright (C) 2011 Kyle Moffett
+           Copyright (C) 2008 Red Hat, Inc
+           Copyright (C) 2007, 2008 Free Software Foundation, Inc
+	   Copyright (c) 1998 Geoffrey Keating
 
    PowerPC Foreign Function Interface
 
@@ -39,32 +41,28 @@
   /* The assembly depends on these exact flags.  */
   FLAG_RETURNS_SMST	= 1 << (31-31), /* Used for FFI_SYSV small structs.  */
   FLAG_RETURNS_NOTHING  = 1 << (31-30), /* These go in cr7 */
+#ifndef __NO_FPRS__
   FLAG_RETURNS_FP       = 1 << (31-29),
+#endif
   FLAG_RETURNS_64BITS   = 1 << (31-28),
 
   FLAG_RETURNS_128BITS  = 1 << (31-27), /* cr6  */
-  FLAG_SYSV_SMST_R4     = 1 << (31-26), /* use r4 for FFI_SYSV 8 byte
-					   structs.  */
-  FLAG_SYSV_SMST_R3     = 1 << (31-25), /* use r3 for FFI_SYSV 4 byte
-					   structs.  */
-  /* Bits (31-24) through (31-19) store shift value for SMST */
 
   FLAG_ARG_NEEDS_COPY   = 1 << (31- 7),
+#ifndef __NO_FPRS__
   FLAG_FP_ARGUMENTS     = 1 << (31- 6), /* cr1.eq; specified by ABI */
+#endif
   FLAG_4_GPR_ARGUMENTS  = 1 << (31- 5),
   FLAG_RETVAL_REFERENCE = 1 << (31- 4)
 };
 
 /* About the SYSV ABI.  */
-unsigned int NUM_GPR_ARG_REGISTERS = 8;
+#define ASM_NEEDS_REGISTERS 4
+#define NUM_GPR_ARG_REGISTERS 8
 #ifndef __NO_FPRS__
-unsigned int NUM_FPR_ARG_REGISTERS = 8;
-#else
-unsigned int NUM_FPR_ARG_REGISTERS = 0;
+# define NUM_FPR_ARG_REGISTERS 8
 #endif
 
-enum { ASM_NEEDS_REGISTERS = 4 };
-
 /* ffi_prep_args_SYSV is called by the assembly routine once stack space
    has been allocated for the function's arguments.
 
@@ -113,10 +111,12 @@
   valp gpr_base;
   int intarg_count;
 
+#ifndef __NO_FPRS__
   /* 'fpr_base' points at the space for fpr1, and grows upwards as
      we use FPR registers.  */
   valp fpr_base;
   int fparg_count;
+#endif
 
   /* 'copy_space' grows down as we put structures in it.  It should
      stay 16-byte aligned.  */
@@ -125,9 +125,8 @@
   /* 'next_arg' grows up as we put parameters in it.  */
   valp next_arg;
 
-  int i, ii MAYBE_UNUSED;
+  int i;
   ffi_type **ptr;
-  double double_tmp;
   union {
     void **v;
     char **c;
@@ -143,15 +142,16 @@
   size_t struct_copy_size;
   unsigned gprvalue;
 
-  if (ecif->cif->abi == FFI_LINUX_SOFT_FLOAT)
-    NUM_FPR_ARG_REGISTERS = 0;
-
   stacktop.c = (char *) stack + bytes;
   gpr_base.u = stacktop.u - ASM_NEEDS_REGISTERS - NUM_GPR_ARG_REGISTERS;
   intarg_count = 0;
+#ifndef __NO_FPRS__
   fpr_base.d = gpr_base.d - NUM_FPR_ARG_REGISTERS;
   fparg_count = 0;
   copy_space.c = ((flags & FLAG_FP_ARGUMENTS) ? fpr_base.c : gpr_base.c);
+#else
+  copy_space.c = gpr_base.c;
+#endif
   next_arg.u = stack + 2;
 
   /* Check that everything starts aligned properly.  */
@@ -174,12 +174,28 @@
        i > 0;
        i--, ptr++, p_argv.v++)
     {
-      switch ((*ptr)->type)
-	{
+      unsigned short typenum = (*ptr)->type;
+
+      /* We may need to handle some values depending on ABI */
+      if (ecif->cif->abi == FFI_LINUX_SOFT_FLOAT) {
+		if (typenum == FFI_TYPE_FLOAT)
+			typenum = FFI_TYPE_UINT32;
+		if (typenum == FFI_TYPE_DOUBLE)
+			typenum = FFI_TYPE_UINT64;
+		if (typenum == FFI_TYPE_LONGDOUBLE)
+			typenum = FFI_TYPE_UINT128;
+      } else if (ecif->cif->abi != FFI_LINUX) {
+#if FFI_TYPE_LONGDOUBLE != FFI_TYPE_DOUBLE
+		if (typenum == FFI_TYPE_LONGDOUBLE)
+			typenum = FFI_TYPE_STRUCT;
+#endif
+      }
+
+      /* Now test the translated value */
+      switch (typenum) {
+#ifndef __NO_FPRS__
 	case FFI_TYPE_FLOAT:
 	  /* With FFI_LINUX_SOFT_FLOAT floats are handled like UINT32.  */
-	  if (ecif->cif->abi == FFI_LINUX_SOFT_FLOAT)
-	    goto soft_float_prep;
 	  double_tmp = **p_argv.f;
 	  if (fparg_count >= NUM_FPR_ARG_REGISTERS)
 	    {
@@ -218,43 +234,6 @@
 
 #if FFI_TYPE_LONGDOUBLE != FFI_TYPE_DOUBLE
 	case FFI_TYPE_LONGDOUBLE:
-	  if ((ecif->cif->abi != FFI_LINUX)
-		&& (ecif->cif->abi != FFI_LINUX_SOFT_FLOAT))
-	    goto do_struct;
-	  /* The soft float ABI for long doubles works like this,
-	     a long double is passed in four consecutive gprs if available.
-	     A maximum of 2 long doubles can be passed in gprs.
-	     If we do not have 4 gprs left, the long double is passed on the
-	     stack, 4-byte aligned.  */
-	  if (ecif->cif->abi == FFI_LINUX_SOFT_FLOAT)
-	    {
-	      unsigned int int_tmp = (*p_argv.ui)[0];
-	      if (intarg_count >= NUM_GPR_ARG_REGISTERS - 3)
-		{
-		  if (intarg_count < NUM_GPR_ARG_REGISTERS)
-		    intarg_count += NUM_GPR_ARG_REGISTERS - intarg_count;
-		  *next_arg.u = int_tmp;
-		  next_arg.u++;
-		  for (ii = 1; ii < 4; ii++)
-		    {
-		      int_tmp = (*p_argv.ui)[ii];
-		      *next_arg.u = int_tmp;
-		      next_arg.u++;
-		    }
-		}
-	      else
-		{
-		  *gpr_base.u++ = int_tmp;
-		  for (ii = 1; ii < 4; ii++)
-		    {
-		      int_tmp = (*p_argv.ui)[ii];
-		      *gpr_base.u++ = int_tmp;
-		    }
-		}
-	      intarg_count +=4;
-	    }
-	  else
-	    {
 	      double_tmp = (*p_argv.d)[0];
 
 	      if (fparg_count >= NUM_FPR_ARG_REGISTERS - 1)
@@ -280,13 +259,40 @@
 
 	      fparg_count += 2;
 	      FFI_ASSERT (flags & FLAG_FP_ARGUMENTS);
-	    }
 	  break;
 #endif
+#endif /* have FPRs */
 
+	/*
+	 * The soft float ABI for long doubles works like this, a long double
+	 * is passed in four consecutive GPRs if available.  A maximum of 2
+	 * long doubles can be passed in gprs.  If we do not have 4 GPRs
+	 * left, the long double is passed on the stack, 4-byte aligned.
+	 */
+	case FFI_TYPE_UINT128: {
+		unsigned int int_tmp = (*p_argv.ui)[0];
+		unsigned int ii;
+		if (intarg_count >= NUM_GPR_ARG_REGISTERS - 3) {
+			if (intarg_count < NUM_GPR_ARG_REGISTERS)
+				intarg_count += NUM_GPR_ARG_REGISTERS - intarg_count;
+			*(next_arg.u++) = int_tmp;
+			for (ii = 1; ii < 4; ii++) {
+				int_tmp = (*p_argv.ui)[ii];
+				*(next_arg.u++) = int_tmp;
+			}
+		} else {
+			*(gpr_base.u++) = int_tmp;
+			for (ii = 1; ii < 4; ii++) {
+				int_tmp = (*p_argv.ui)[ii];
+				*(gpr_base.u++) = int_tmp;
+			}
+		}
+		intarg_count += 4;
+		break;
+	}
+
 	case FFI_TYPE_UINT64:
 	case FFI_TYPE_SINT64:
-	soft_double_prep:
 	  if (intarg_count == NUM_GPR_ARG_REGISTERS-1)
 	    intarg_count++;
 	  if (intarg_count >= NUM_GPR_ARG_REGISTERS)
@@ -319,9 +325,6 @@
 	  break;
 
 	case FFI_TYPE_STRUCT:
-#if FFI_TYPE_LONGDOUBLE != FFI_TYPE_DOUBLE
-	do_struct:
-#endif
 	  struct_copy_size = ((*ptr)->size + 15) & ~0xF;
 	  copy_space.c -= struct_copy_size;
 	  memcpy (copy_space.c, *p_argv.c, (*ptr)->size);
@@ -349,7 +352,6 @@
 	case FFI_TYPE_UINT32:
 	case FFI_TYPE_SINT32:
 	case FFI_TYPE_POINTER:
-	soft_float_prep:
 
 	  gprvalue = **p_argv.ui;
 
@@ -366,8 +368,10 @@
   /* Check that we didn't overrun the stack...  */
   FFI_ASSERT (copy_space.c >= next_arg.c);
   FFI_ASSERT (gpr_base.u <= stacktop.u - ASM_NEEDS_REGISTERS);
+#ifndef __NO_FPRS__
   FFI_ASSERT (fpr_base.u
 	      <= stacktop.u - ASM_NEEDS_REGISTERS - NUM_GPR_ARG_REGISTERS);
+#endif
   FFI_ASSERT (flags & FLAG_4_GPR_ARGUMENTS || intarg_count <= 4);
 }
 
@@ -604,9 +608,6 @@
   unsigned type = cif->rtype->type;
   unsigned size = cif->rtype->size;
 
-  if (cif->abi == FFI_LINUX_SOFT_FLOAT)
-    NUM_FPR_ARG_REGISTERS = 0;
-
   if (cif->abi != FFI_LINUX64)
     {
       /* All the machine-independent calculation of cif->bytes will be wrong.
@@ -646,62 +647,56 @@
      - Single/double FP values in fpr1, long double in fpr1,fpr2.
      - soft-float float/doubles are treated as UINT32/UINT64 respectivley.
      - soft-float long doubles are returned in gpr3-gpr6.  */
+  /* First translate for softfloat/nonlinux */
+  if (cif->abi == FFI_LINUX_SOFT_FLOAT) {
+	if (type == FFI_TYPE_FLOAT)
+		type = FFI_TYPE_UINT32;
+	if (type == FFI_TYPE_DOUBLE)
+		type = FFI_TYPE_UINT64;
+	if (type == FFI_TYPE_LONGDOUBLE)
+		type = FFI_TYPE_UINT128;
+  } else if (cif->abi != FFI_LINUX && cif->abi != FFI_LINUX64) {
+#if FFI_TYPE_LONGDOUBLE != FFI_TYPE_DOUBLE
+	if (type == FFI_TYPE_LONGDOUBLE)
+		type = FFI_TYPE_STRUCT;
+#endif
+  }
+
   switch (type)
     {
-#if FFI_TYPE_LONGDOUBLE != FFI_TYPE_DOUBLE
+#ifndef __NO_FPRS__
     case FFI_TYPE_LONGDOUBLE:
-      if (cif->abi != FFI_LINUX && cif->abi != FFI_LINUX64
-	&& cif->abi != FFI_LINUX_SOFT_FLOAT)
-	goto byref;
       flags |= FLAG_RETURNS_128BITS;
       /* Fall through.  */
-#endif
     case FFI_TYPE_DOUBLE:
       flags |= FLAG_RETURNS_64BITS;
       /* Fall through.  */
     case FFI_TYPE_FLOAT:
-      /* With FFI_LINUX_SOFT_FLOAT no fp registers are used.  */
-      if (cif->abi != FFI_LINUX_SOFT_FLOAT)
-	flags |= FLAG_RETURNS_FP;
+      flags |= FLAG_RETURNS_FP;
       break;
+#endif
 
+    case FFI_TYPE_UINT128:
+      flags |= FLAG_RETURNS_128BITS;
+      /* Fall through.  */
     case FFI_TYPE_UINT64:
     case FFI_TYPE_SINT64:
       flags |= FLAG_RETURNS_64BITS;
       break;
 
     case FFI_TYPE_STRUCT:
-      if (cif->abi == FFI_SYSV)
-	{
-	  /* The final SYSV ABI says that structures smaller or equal 8 bytes
-	     are returned in r3/r4. The FFI_GCC_SYSV ABI instead returns them
-	     in memory.  */
-
-	  /* Treat structs with size <= 8 bytes.  */
-	  if (size <= 8)
-	    {
-	      flags |= FLAG_RETURNS_SMST;
-	      /* These structs are returned in r3. We pack the type and the
-		 precalculated shift value (needed in the sysv.S) into flags.
-		 The same applies for the structs returned in r3/r4.  */
-	      if (size <= 4)
-		{
-		  flags |= FLAG_SYSV_SMST_R3;
-		  flags |= 8 * (4 - size) << 8;
-		  break;
-		}
-	      /* These structs are returned in r3 and r4. See above.   */
-	      if  (size <= 8)
-		{
-		  flags |= FLAG_SYSV_SMST_R3 | FLAG_SYSV_SMST_R4;
-		  flags |= 8 * (8 - size) << 8;
-		  break;
-		}
-	    }
-	}
-#if FFI_TYPE_LONGDOUBLE != FFI_TYPE_DOUBLE
-    byref:
-#endif
+      /*
+       * The final SYSV ABI says that structures smaller or equal 8 bytes
+       * are returned in r3/r4. The FFI_GCC_SYSV ABI instead returns them
+       * in memory.
+       *
+       * NOTE: The assembly code can safely assume that it just needs to
+       *       store both r3 and r4 into a 8-byte word-aligned buffer, as
+       *       we allocate a temporary buffer in ffi_call() if this flag is
+       *       set.
+       */
+      if (cif->abi == FFI_SYSV && size <= 8)
+	flags |= FLAG_RETURNS_SMST;
       intarg_count++;
       flags |= FLAG_RETVAL_REFERENCE;
       /* Fall through.  */
@@ -722,39 +717,36 @@
        Stuff on the stack needs to keep proper alignment.  */
     for (ptr = cif->arg_types, i = cif->nargs; i > 0; i--, ptr++)
       {
-	switch ((*ptr)->type)
-	  {
+	unsigned short typenum = (*ptr)->type;
+
+	/* We may need to handle some values depending on ABI */
+	if (cif->abi == FFI_LINUX_SOFT_FLOAT) {
+		if (typenum == FFI_TYPE_FLOAT)
+			typenum = FFI_TYPE_UINT32;
+		if (typenum == FFI_TYPE_DOUBLE)
+			typenum = FFI_TYPE_UINT64;
+		if (typenum == FFI_TYPE_LONGDOUBLE)
+			typenum = FFI_TYPE_UINT128;
+	} else if (cif->abi != FFI_LINUX && cif->abi != FFI_LINUX64) {
+#if FFI_TYPE_LONGDOUBLE != FFI_TYPE_DOUBLE
+		if (typenum == FFI_TYPE_LONGDOUBLE)
+			typenum = FFI_TYPE_STRUCT;
+#endif
+	}
+
+	switch (typenum) {
+#ifndef __NO_FPRS__
 	  case FFI_TYPE_FLOAT:
-	    /* With FFI_LINUX_SOFT_FLOAT floats are handled like UINT32.  */
-	    if (cif->abi == FFI_LINUX_SOFT_FLOAT)
-	      goto soft_float_cif;
 	    fparg_count++;
 	    /* floating singles are not 8-aligned on stack */
 	    break;
 
 #if FFI_TYPE_LONGDOUBLE != FFI_TYPE_DOUBLE
 	  case FFI_TYPE_LONGDOUBLE:
-	    if (cif->abi != FFI_LINUX && cif->abi != FFI_LINUX_SOFT_FLOAT)
-	      goto do_struct;
-	    if (cif->abi == FFI_LINUX_SOFT_FLOAT)
-	      {
-		if (intarg_count >= NUM_GPR_ARG_REGISTERS - 3
-		  || intarg_count < NUM_GPR_ARG_REGISTERS)
-		  /* A long double in FFI_LINUX_SOFT_FLOAT can use only
-		     a set of four consecutive gprs. If we have not enough,
-		     we have to adjust the intarg_count value.  */
-		  intarg_count += NUM_GPR_ARG_REGISTERS - intarg_count;
-		intarg_count += 4;
-		break;
-	      }
-	    else
-	      fparg_count++;
+	    fparg_count++;
 	    /* Fall thru */
 #endif
 	  case FFI_TYPE_DOUBLE:
-	    /* With FFI_LINUX_SOFT_FLOAT doubles are handled like UINT64.  */
-	    if (cif->abi == FFI_LINUX_SOFT_FLOAT)
-	      goto soft_double_cif;
 	    fparg_count++;
 	    /* If this FP arg is going on the stack, it must be
 	       8-byte-aligned.  */
@@ -763,10 +755,21 @@
 		&& intarg_count % 2 != 0)
 	      intarg_count++;
 	    break;
+#endif
+	  case FFI_TYPE_UINT128:
+		/*
+		 * A long double in FFI_LINUX_SOFT_FLOAT can use only a set
+		 * of four consecutive gprs. If we do not have enough, we
+		 * have to adjust the intarg_count value.
+		 */
+		if (intarg_count >= NUM_GPR_ARG_REGISTERS - 3
+				&& intarg_count < NUM_GPR_ARG_REGISTERS)
+			intarg_count = NUM_GPR_ARG_REGISTERS;
+		intarg_count += 4;
+		break;
 
 	  case FFI_TYPE_UINT64:
 	  case FFI_TYPE_SINT64:
-	  soft_double_cif:
 	    /* 'long long' arguments are passed as two words, but
 	       either both words must fit in registers or both go
 	       on the stack.  If they go on the stack, they must
@@ -783,9 +786,6 @@
 	    break;
 
 	  case FFI_TYPE_STRUCT:
-#if FFI_TYPE_LONGDOUBLE != FFI_TYPE_DOUBLE
-	  do_struct:
-#endif
 	    /* We must allocate space for a copy of these to enforce
 	       pass-by-value.  Pad the space up to a multiple of 16
 	       bytes (the maximum alignment required for anything under
@@ -793,12 +793,20 @@
 	    struct_copy_size += ((*ptr)->size + 15) & ~0xF;
 	    /* Fall through (allocate space for the pointer).  */
 
-	  default:
-	  soft_float_cif:
+	  case FFI_TYPE_POINTER:
+	  case FFI_TYPE_INT:
+	  case FFI_TYPE_UINT32:
+	  case FFI_TYPE_SINT32:
+	  case FFI_TYPE_UINT16:
+	  case FFI_TYPE_SINT16:
+	  case FFI_TYPE_UINT8:
+	  case FFI_TYPE_SINT8:
 	    /* Everything else is passed as a 4-byte word in a GPR, either
 	       the object itself or a pointer to it.  */
 	    intarg_count++;
 	    break;
+	  default:
+		FFI_ASSERT (0);
 	  }
       }
   else
@@ -827,16 +835,29 @@
 	    intarg_count += ((*ptr)->size + 7) / 8;
 	    break;
 
-	  default:
+	  case FFI_TYPE_POINTER:
+	  case FFI_TYPE_UINT64:
+	  case FFI_TYPE_SINT64:
+	  case FFI_TYPE_INT:
+	  case FFI_TYPE_UINT32:
+	  case FFI_TYPE_SINT32:
+	  case FFI_TYPE_UINT16:
+	  case FFI_TYPE_SINT16:
+	  case FFI_TYPE_UINT8:
+	  case FFI_TYPE_SINT8:
 	    /* Everything else is passed as a 8-byte word in a GPR, either
 	       the object itself or a pointer to it.  */
 	    intarg_count++;
 	    break;
+	  default:
+		FFI_ASSERT (0);
 	  }
       }
 
+#ifndef __NO_FPRS__
   if (fparg_count != 0)
     flags |= FLAG_FP_ARGUMENTS;
+#endif
   if (intarg_count > 4)
     flags |= FLAG_4_GPR_ARGUMENTS;
   if (struct_copy_size != 0)
@@ -844,21 +865,27 @@
 
   if (cif->abi != FFI_LINUX64)
     {
+#ifndef __NO_FPRS__
       /* Space for the FPR registers, if needed.  */
       if (fparg_count != 0)
 	bytes += NUM_FPR_ARG_REGISTERS * sizeof (double);
+#endif
 
       /* Stack space.  */
       if (intarg_count > NUM_GPR_ARG_REGISTERS)
 	bytes += (intarg_count - NUM_GPR_ARG_REGISTERS) * sizeof (int);
+#ifndef __NO_FPRS__
       if (fparg_count > NUM_FPR_ARG_REGISTERS)
 	bytes += (fparg_count - NUM_FPR_ARG_REGISTERS) * sizeof (double);
+#endif
     }
   else
     {
+#ifndef __NO_FPRS__
       /* Space for the FPR registers, if needed.  */
       if (fparg_count != 0)
 	bytes += NUM_FPR_ARG_REGISTERS64 * sizeof (double);
+#endif
 
       /* Stack space.  */
       if (intarg_count > NUM_GPR_ARG_REGISTERS64)
@@ -886,28 +913,41 @@
 void
 ffi_call(ffi_cif *cif, void (*fn)(void), void *rvalue, void **avalue)
 {
+  /*
+   * The final SYSV ABI says that structures smaller or equal 8 bytes
+   * are returned in r3/r4. The FFI_GCC_SYSV ABI instead returns them
+   * in memory.
+   *
+   * Just to keep things simple for the assembly code, we will always
+   * bounce-buffer struct return values less than or equal to 8 bytes.
+   * This allows the ASM to handle SYSV small structures by directly
+   * writing r3 and r4 to memory without worrying about struct size.
+   */
+  unsigned int smst_buffer[2];
   extended_cif ecif;
+  unsigned int rsize;
 
   ecif.cif = cif;
   ecif.avalue = avalue;
 
-  /* If the return value is a struct and we don't have a return	*/
-  /* value address then we need to make one		        */
+  /* Ensure that we have a valid struct return value */
+  ecif.rvalue = rvalue;
+  if (cif->rtype->type == FFI_TYPE_STRUCT) {
+    rsize = cif->rtype->size;
+    if (rsize <= 8)
+      ecif.rvalue = smst_buffer;
+    else if (!rvalue)
+      ecif.rvalue = alloca(rsize);
+  }
 
-  if ((rvalue == NULL) && (cif->rtype->type == FFI_TYPE_STRUCT))
-    {
-      ecif.rvalue = alloca(cif->rtype->size);
-    }
-  else
-    ecif.rvalue = rvalue;
-
-
   switch (cif->abi)
     {
 #ifndef POWERPC64
+# ifndef __NO_FPRS__
     case FFI_SYSV:
     case FFI_GCC_SYSV:
     case FFI_LINUX:
+# endif
     case FFI_LINUX_SOFT_FLOAT:
       ffi_call_SYSV (&ecif, -cif->bytes, cif->flags, ecif.rvalue, fn);
       break;
@@ -920,6 +960,10 @@
       FFI_ASSERT (0);
       break;
     }
+
+  /* Check for a bounce-buffered return value */
+  if (rvalue && ecif.rvalue == smst_buffer)
+    memcpy(rvalue, smst_buffer, rsize);
 }
 
 
@@ -949,14 +993,19 @@
 #ifdef POWERPC64
   void **tramp = (void **) &closure->tramp[0];
 
-  FFI_ASSERT (cif->abi == FFI_LINUX64);
+  if (cif->abi != FFI_LINUX64)
+    return FFI_BAD_ABI;
   /* Copy function address and TOC from ffi_closure_LINUX64.  */
   memcpy (tramp, (char *) ffi_closure_LINUX64, 16);
   tramp[2] = codeloc;
 #else
   unsigned int *tramp;
 
-  FFI_ASSERT (cif->abi == FFI_GCC_SYSV || cif->abi == FFI_SYSV);
+  if (! (cif->abi == FFI_GCC_SYSV 
+	 || cif->abi == FFI_SYSV
+	 || cif->abi == FFI_LINUX
+	 || cif->abi == FFI_LINUX_SOFT_FLOAT))
+    return FFI_BAD_ABI;
 
   tramp = (unsigned int *) &closure->tramp[0];
   tramp[0] = 0x7c0802a6;  /*   mflr    r0 */
@@ -1011,32 +1060,38 @@
   void **          avalue;
   ffi_type **      arg_types;
   long             i, avn;
-  long             nf;   /* number of floating registers already used */
-  long             ng;   /* number of general registers already used */
-  ffi_cif *        cif;
-  double           temp;
-  unsigned         size;
+#ifndef __NO_FPRS__
+  long             nf = 0;   /* number of floating registers already used */
+#endif
+  long             ng = 0;   /* number of general registers already used */
 
-  cif = closure->cif;
+  ffi_cif *cif = closure->cif;
+  unsigned       size     = cif->rtype->size;
+  unsigned short rtypenum = cif->rtype->type;
+
   avalue = alloca (cif->nargs * sizeof (void *));
-  size = cif->rtype->size;
 
-  nf = 0;
-  ng = 0;
+  /* First translate for softfloat/nonlinux */
+  if (cif->abi == FFI_LINUX_SOFT_FLOAT) {
+	if (rtypenum == FFI_TYPE_FLOAT)
+		rtypenum = FFI_TYPE_UINT32;
+	if (rtypenum == FFI_TYPE_DOUBLE)
+		rtypenum = FFI_TYPE_UINT64;
+	if (rtypenum == FFI_TYPE_LONGDOUBLE)
+		rtypenum = FFI_TYPE_UINT128;
+  } else if (cif->abi != FFI_LINUX && cif->abi != FFI_LINUX64) {
+#if FFI_TYPE_LONGDOUBLE != FFI_TYPE_DOUBLE
+	if (rtypenum == FFI_TYPE_LONGDOUBLE)
+		rtypenum = FFI_TYPE_STRUCT;
+#endif
+  }
 
+
   /* Copy the caller's structure return value address so that the closure
      returns the data directly to the caller.
      For FFI_SYSV the result is passed in r3/r4 if the struct size is less
      or equal 8 bytes.  */
-
-  if ((cif->rtype->type == FFI_TYPE_STRUCT
-       && !((cif->abi == FFI_SYSV) && (size <= 8)))
-#if FFI_TYPE_LONGDOUBLE != FFI_TYPE_DOUBLE
-      || (cif->rtype->type == FFI_TYPE_LONGDOUBLE
-	  && cif->abi != FFI_LINUX && cif->abi != FFI_LINUX_SOFT_FLOAT)
-#endif
-      )
-    {
+  if (rtypenum == FFI_TYPE_STRUCT && ((cif->abi != FFI_SYSV) || (size > 8))) {
       rvalue = (void *) *pgr;
       ng++;
       pgr++;
@@ -1047,10 +1102,109 @@
   arg_types = cif->arg_types;
 
   /* Grab the addresses of the arguments from the stack frame.  */
-  while (i < avn)
-    {
-      switch (arg_types[i]->type)
-	{
+  while (i < avn) {
+      unsigned short typenum = arg_types[i]->type;
+
+      /* We may need to handle some values depending on ABI */
+      if (cif->abi == FFI_LINUX_SOFT_FLOAT) {
+		if (typenum == FFI_TYPE_FLOAT)
+			typenum = FFI_TYPE_UINT32;
+		if (typenum == FFI_TYPE_DOUBLE)
+			typenum = FFI_TYPE_UINT64;
+		if (typenum == FFI_TYPE_LONGDOUBLE)
+			typenum = FFI_TYPE_UINT128;
+      } else if (cif->abi != FFI_LINUX && cif->abi != FFI_LINUX64) {
+#if FFI_TYPE_LONGDOUBLE != FFI_TYPE_DOUBLE
+		if (typenum == FFI_TYPE_LONGDOUBLE)
+			typenum = FFI_TYPE_STRUCT;
+#endif
+      }
+
+      switch (typenum) {
+#ifndef __NO_FPRS__
+	case FFI_TYPE_FLOAT:
+	  /* unfortunately float values are stored as doubles
+	   * in the ffi_closure_SYSV code (since we don't check
+	   * the type in that routine).
+	   */
+
+	  /* there are 8 64bit floating point registers */
+
+	  if (nf < 8)
+	    {
+	      temp = pfr->d;
+	      pfr->f = (float) temp;
+	      avalue[i] = pfr;
+	      nf++;
+	      pfr++;
+	    }
+	  else
+	    {
+	      /* FIXME? here we are really changing the values
+	       * stored in the original calling routines outgoing
+	       * parameter stack.  This is probably a really
+	       * naughty thing to do but...
+	       */
+	      avalue[i] = pst;
+	      pst += 1;
+	    }
+	  break;
+
+	case FFI_TYPE_DOUBLE:
+	  /* On the outgoing stack all values are aligned to 8 */
+	  /* there are 8 64bit floating point registers */
+
+	  if (nf < 8)
+	    {
+	      avalue[i] = pfr;
+	      nf++;
+	      pfr++;
+	    }
+	  else
+	    {
+	      if (((long) pst) & 4)
+		pst++;
+	      avalue[i] = pst;
+	      pst += 2;
+	    }
+	  break;
+
+#if FFI_TYPE_LONGDOUBLE != FFI_TYPE_DOUBLE
+	case FFI_TYPE_LONGDOUBLE:
+	  if (nf < 7)
+	    {
+	      avalue[i] = pfr;
+	      pfr += 2;
+	      nf += 2;
+	    }
+	  else
+	    {
+	      if (((long) pst) & 4)
+		pst++;
+	      avalue[i] = pst;
+	      pst += 4;
+	      nf = 8;
+	    }
+	  break;
+#endif
+#endif /* have FPRS */
+
+	case FFI_TYPE_UINT128:
+		/*
+		 * Test if for the whole long double, 4 gprs are available.
+		 * otherwise the stuff ends up on the stack.
+		 */
+		if (ng < 5) {
+			avalue[i] = pgr;
+			pgr += 4;
+			ng += 4;
+		} else {
+			avalue[i] = pst;
+			pst += 4;
+			ng = 8+4;
+		}
+		break;
+
 	case FFI_TYPE_SINT8:
 	case FFI_TYPE_UINT8:
 	  /* there are 8 gpr registers used to pass values */
@@ -1086,7 +1240,6 @@
 	case FFI_TYPE_SINT32:
 	case FFI_TYPE_UINT32:
 	case FFI_TYPE_POINTER:
-	soft_float_closure:
 	  /* there are 8 gpr registers used to pass values */
 	  if (ng < 8)
 	    {
@@ -1102,9 +1255,6 @@
 	  break;
 
 	case FFI_TYPE_STRUCT:
-#if FFI_TYPE_LONGDOUBLE != FFI_TYPE_DOUBLE
-	do_struct:
-#endif
 	  /* Structs are passed by reference. The address will appear in a
 	     gpr if it is one of the first 8 arguments.  */
 	  if (ng < 8)
@@ -1122,7 +1272,6 @@
 
 	case FFI_TYPE_SINT64:
 	case FFI_TYPE_UINT64:
-	soft_double_closure:
 	  /* passing long long ints are complex, they must
 	   * be passed in suitable register pairs such as
 	   * (r3,r4) or (r5,r6) or (r6,r7), or (r7,r8) or (r9,r10)
@@ -1154,99 +1303,8 @@
 	    }
 	  break;
 
-	case FFI_TYPE_FLOAT:
-	  /* With FFI_LINUX_SOFT_FLOAT floats are handled like UINT32.  */
-	  if (cif->abi == FFI_LINUX_SOFT_FLOAT)
-	    goto soft_float_closure;
-	  /* unfortunately float values are stored as doubles
-	   * in the ffi_closure_SYSV code (since we don't check
-	   * the type in that routine).
-	   */
-
-	  /* there are 8 64bit floating point registers */
-
-	  if (nf < 8)
-	    {
-	      temp = pfr->d;
-	      pfr->f = (float) temp;
-	      avalue[i] = pfr;
-	      nf++;
-	      pfr++;
-	    }
-	  else
-	    {
-	      /* FIXME? here we are really changing the values
-	       * stored in the original calling routines outgoing
-	       * parameter stack.  This is probably a really
-	       * naughty thing to do but...
-	       */
-	      avalue[i] = pst;
-	      pst += 1;
-	    }
-	  break;
-
-	case FFI_TYPE_DOUBLE:
-	  /* With FFI_LINUX_SOFT_FLOAT doubles are handled like UINT64.  */
-	  if (cif->abi == FFI_LINUX_SOFT_FLOAT)
-	    goto soft_double_closure;
-	  /* On the outgoing stack all values are aligned to 8 */
-	  /* there are 8 64bit floating point registers */
-
-	  if (nf < 8)
-	    {
-	      avalue[i] = pfr;
-	      nf++;
-	      pfr++;
-	    }
-	  else
-	    {
-	      if (((long) pst) & 4)
-		pst++;
-	      avalue[i] = pst;
-	      pst += 2;
-	    }
-	  break;
-
-#if FFI_TYPE_LONGDOUBLE != FFI_TYPE_DOUBLE
-	case FFI_TYPE_LONGDOUBLE:
-	  if (cif->abi != FFI_LINUX && cif->abi != FFI_LINUX_SOFT_FLOAT)
-	    goto do_struct;
-	  if (cif->abi == FFI_LINUX_SOFT_FLOAT)
-	    { /* Test if for the whole long double, 4 gprs are available.
-		 otherwise the stuff ends up on the stack.  */
-	      if (ng < 5)
-		{
-		  avalue[i] = pgr;
-		  pgr += 4;
-		  ng += 4;
-		}
-	      else
-		{
-		  avalue[i] = pst;
-		  pst += 4;
-		  ng = 8;
-		}
-	      break;
-	    }
-	  if (nf < 7)
-	    {
-	      avalue[i] = pfr;
-	      pfr += 2;
-	      nf += 2;
-	    }
-	  else
-	    {
-	      if (((long) pst) & 4)
-		pst++;
-	      avalue[i] = pst;
-	      pst += 4;
-	      nf = 8;
-	    }
-	  break;
-#endif
-
 	default:
-	  FFI_ASSERT (0);
+		FFI_ASSERT (0);
 	}
 
       i++;
@@ -1263,39 +1321,9 @@
      already used and we never have a struct with size zero. That is the reason
      for the subtraction of 1. See the comment in ffitarget.h about ordering.
   */
-  if (cif->abi == FFI_SYSV && cif->rtype->type == FFI_TYPE_STRUCT
-      && size <= 8)
+  if (cif->abi == FFI_SYSV && rtypenum == FFI_TYPE_STRUCT && size <= 8)
     return (FFI_SYSV_TYPE_SMALL_STRUCT - 1) + size;
-#if FFI_TYPE_LONGDOUBLE != FFI_TYPE_DOUBLE
-  else if (cif->rtype->type == FFI_TYPE_LONGDOUBLE
-	   && cif->abi != FFI_LINUX && cif->abi != FFI_LINUX_SOFT_FLOAT)
-    return FFI_TYPE_STRUCT;
-#endif
-  /* With FFI_LINUX_SOFT_FLOAT floats and doubles are handled like UINT32
-     respectivley UINT64.  */
-  if (cif->abi == FFI_LINUX_SOFT_FLOAT)
-    {
-      switch (cif->rtype->type)
-	{
-	case FFI_TYPE_FLOAT:
-	  return FFI_TYPE_UINT32;
-	  break;
-	case FFI_TYPE_DOUBLE:
-	  return FFI_TYPE_UINT64;
-	  break;
-#if FFI_TYPE_LONGDOUBLE != FFI_TYPE_DOUBLE
-	case FFI_TYPE_LONGDOUBLE:
-	  return FFI_TYPE_UINT128;
-	  break;
-#endif
-	default:
-	  return cif->rtype->type;
-	}
-    }
-  else
-    {
-      return cif->rtype->type;
-    }
+  return rtypenum;
 }
 
 int FFI_HIDDEN ffi_closure_helper_LINUX64 (ffi_closure *, void *,
Index: src/powerpc/sysv.S
===================================================================
--- src/powerpc/sysv.S	(revision 184894)
+++ src/powerpc/sysv.S	(working copy)
@@ -83,6 +83,7 @@
 	nop
 1:
 
+#ifndef __NO_FPRS__
 	/* Load all the FP registers.  */
 	bf-	6,2f
 	lfd	%f1,-16-(8*4)-(8*8)(%r28)
@@ -94,6 +95,7 @@
 	lfd	%f6,-16-(8*4)-(3*8)(%r28)
 	lfd	%f7,-16-(8*4)-(2*8)(%r28)
 	lfd	%f8,-16-(8*4)-(1*8)(%r28)
+#endif
 2:
 
 	/* Make the call.  */
@@ -103,7 +105,9 @@
 	mtcrf	0x01,%r31 /* cr7  */
 	bt-	31,L(small_struct_return_value)
 	bt-	30,L(done_return_value)
+#ifndef __NO_FPRS__
 	bt-	29,L(fp_return_value)
+#endif
 	stw	%r3,0(%r30)
 	bf+	28,L(done_return_value)
 	stw	%r4,4(%r30)
@@ -124,6 +128,7 @@
 	lwz	%r1,0(%r1)
 	blr
 
+#ifndef __NO_FPRS__
 L(fp_return_value):
 	bf	28,L(float_return_value)
 	stfd	%f1,0(%r30)
@@ -134,21 +139,17 @@
 L(float_return_value):
 	stfs	%f1,0(%r30)
 	b	L(done_return_value)
+#endif
 
 L(small_struct_return_value):
-	extrwi	%r6,%r31,2,19         /* number of bytes padding = shift/8 */
-	mtcrf	0x02,%r31	      /* copy flags to cr[24:27] (cr6) */
-	extrwi	%r5,%r31,5,19         /* r5 <- number of bits of padding */
-	subfic  %r6,%r6,4             /* r6 <- number of useful bytes in r3 */
-	bf-	25,L(done_return_value) /* struct in r3 ? if not, done. */
-/* smst_one_register: */
-	slw	%r3,%r3,%r5           /* Left-justify value in r3 */
-	mtxer	%r6                   /* move byte count to XER ... */
-	stswx	%r3,0,%r30            /* ... and store that many bytes */
-	bf+	26,L(done_return_value)  /* struct in r3:r4 ? */
-	add	%r6,%r6,%r30          /* adjust pointer */
-	stswi	%r4,%r6,4             /* store last four bytes */
-	b	L(done_return_value)
+	/*
+	 * The C code always allocates a properly-aligned 8-byte bounce
+	 * buffer to make this assembly code very simple.  Just write out
+	 * r3 and r4 to the buffer to allow the C code to handle the rest.
+	 */
+	stw %r3, 0(%r30)
+	stw %r4, 4(%r30)
+	b L(done_return_value)
 
 .LFE1:
 END(ffi_call_SYSV)
Index: src/powerpc/asm.h
===================================================================
--- src/powerpc/asm.h	(revision 184894)
+++ src/powerpc/asm.h	(working copy)
@@ -42,7 +42,7 @@
 
 /* If compiled for profiling, call `_mcount' at the start of each function.  */
 #ifdef	PROF
-/* The mcount code relies on a the return address being on the stack
+/* The mcount code relies on the return address being on the stack
    to locate our caller and so it can restore it; so store one just
    for its benefit.  */
 #ifdef PIC
Index: src/closures.c
===================================================================
--- src/closures.c	(revision 184894)
+++ src/closures.c	(working copy)
@@ -1,6 +1,7 @@
 /* -----------------------------------------------------------------------
-   closures.c - Copyright (c) 2007  Red Hat, Inc.
-   Copyright (C) 2007, 2009, 2010 Free Software Foundation, Inc
+   closures.c - Copyright (c) 2007, 2009, 2010  Red Hat, Inc.
+                Copyright (C) 2007, 2009, 2010 Free Software Foundation, Inc
+                Copyright (c) 2011 Plausible Labs Cooperative, Inc.
 
    Code to allocate and deallocate memory for closures.
 
@@ -32,7 +33,7 @@
 #include <ffi.h>
 #include <ffi_common.h>
 
-#ifndef FFI_MMAP_EXEC_WRIT
+#if !FFI_MMAP_EXEC_WRIT && !FFI_EXEC_TRAMPOLINE_TABLE
 # if __gnu_linux__
 /* This macro indicates it may be forbidden to map anonymous memory
    with both write and execute permission.  Code compiled when this
@@ -63,8 +64,12 @@
 
 #if FFI_CLOSURES
 
-# if FFI_MMAP_EXEC_WRIT
+# if FFI_EXEC_TRAMPOLINE_TABLE
 
+// Per-target implementation; It's unclear what can reasonable be shared between two OS/architecture implementations.
+
+# elif FFI_MMAP_EXEC_WRIT /* !FFI_EXEC_TRAMPOLINE_TABLE */
+
 #define USE_LOCKS 1
 #define USE_DL_PREFIX 1
 #ifdef __GNUC__
@@ -167,7 +172,7 @@
 
 #endif /* !FFI_MMAP_EXEC_SELINUX */
 
-#elif defined (__CYGWIN__)
+#elif defined (__CYGWIN__) || defined(__INTERIX)
 
 #include <sys/mman.h>
 
@@ -193,11 +198,11 @@
 static size_t dlmalloc_usable_size(void*) MAYBE_UNUSED;
 static void dlmalloc_stats(void) MAYBE_UNUSED;
 
-#if !(defined(X86_WIN32) || defined(X86_WIN64) || defined(__OS2__)) || defined (__CYGWIN__)
+#if !(defined(X86_WIN32) || defined(X86_WIN64) || defined(__OS2__)) || defined (__CYGWIN__) || defined(__INTERIX)
 /* Use these for mmap and munmap within dlmalloc.c.  */
 static void *dlmmap(void *, size_t, int, int, int, off_t);
 static int dlmunmap(void *, size_t);
-#endif /* !(defined(X86_WIN32) || defined(X86_WIN64) || defined(__OS2__)) || defined (__CYGWIN__) */
+#endif /* !(defined(X86_WIN32) || defined(X86_WIN64) || defined(__OS2__)) || defined (__CYGWIN__) || defined(__INTERIX) */
 
 #define mmap dlmmap
 #define munmap dlmunmap
@@ -207,7 +212,7 @@
 #undef mmap
 #undef munmap
 
-#if !(defined(X86_WIN32) || defined(X86_WIN64) || defined(__OS2__)) || defined (__CYGWIN__)
+#if !(defined(X86_WIN32) || defined(X86_WIN64) || defined(__OS2__)) || defined (__CYGWIN__) || defined(__INTERIX)
 
 /* A mutex used to synchronize access to *exec* variables in this file.  */
 static pthread_mutex_t open_temp_exec_file_mutex = PTHREAD_MUTEX_INITIALIZER;
@@ -522,7 +527,7 @@
 }
 #endif
 
-#endif /* !(defined(X86_WIN32) || defined(X86_WIN64) || defined(__OS2__)) || defined (__CYGWIN__) */
+#endif /* !(defined(X86_WIN32) || defined(X86_WIN64) || defined(__OS2__)) || defined (__CYGWIN__) || defined(__INTERIX) */
 
 /* Allocate a chunk of memory with the given size.  Returns a pointer
    to the writable address, and sets *CODE to the executable
Index: src/m32r/ffitarget.h
===================================================================
--- src/m32r/ffitarget.h	(revision 184894)
+++ src/m32r/ffitarget.h	(working copy)
@@ -1,5 +1,6 @@
 /* -----------------------------------------------------------------*-C-*-
-   ffitarget.h - Copyright (c) 2004  Renesas Technology.
+   ffitarget.h - Copyright (c) 2012  Anthony Green
+                 Copyright (c) 2004  Renesas Technology.
    Target configuration macros for M32R.
 
    Permission is hereby granted, free of charge, to any person obtaining
@@ -26,6 +27,10 @@
 #ifndef LIBFFI_TARGET_H
 #define LIBFFI_TARGET_H
 
+#ifndef LIBFFI_H
+#error "Please do not include ffitarget.h directly into your source.  Use ffi.h instead."
+#endif
+
 /* ---- Generic type definitions ----------------------------------------- */
 
 #ifndef LIBFFI_ASM
@@ -36,8 +41,8 @@
   {
     FFI_FIRST_ABI = 0,
     FFI_SYSV,
-    FFI_DEFAULT_ABI = FFI_SYSV,
-    FFI_LAST_ABI = FFI_DEFAULT_ABI + 1
+    FFI_LAST_ABI,
+    FFI_DEFAULT_ABI = FFI_SYSV
   } ffi_abi;
 #endif
 
Index: src/sh64/ffitarget.h
===================================================================
--- src/sh64/ffitarget.h	(revision 184894)
+++ src/sh64/ffitarget.h	(working copy)
@@ -1,5 +1,6 @@
 /* -----------------------------------------------------------------*-C-*-
-   ffitarget.h - Copyright (c) 1996-2003  Red Hat, Inc.
+   ffitarget.h - Copyright (c) 2012  Anthony Green
+                 Copyright (c) 1996-2003  Red Hat, Inc.
    Target configuration macros for SuperH - SHmedia.
 
    Permission is hereby granted, free of charge, to any person obtaining
@@ -27,6 +28,10 @@
 #ifndef LIBFFI_TARGET_H
 #define LIBFFI_TARGET_H
 
+#ifndef LIBFFI_H
+#error "Please do not include ffitarget.h directly into your source.  Use ffi.h instead."
+#endif
+
 /* ---- Generic type definitions ----------------------------------------- */
 
 #ifndef LIBFFI_ASM
@@ -36,8 +41,8 @@
 typedef enum ffi_abi {
   FFI_FIRST_ABI = 0,
   FFI_SYSV,
-  FFI_DEFAULT_ABI = FFI_SYSV,
-  FFI_LAST_ABI = FFI_DEFAULT_ABI + 1
+  FFI_LAST_ABI,
+  FFI_DEFAULT_ABI = FFI_SYSV
 } ffi_abi;
 
 #define FFI_EXTRA_CIF_FIELDS long long flags2
Index: src/x86/ffi64.c
===================================================================
--- src/x86/ffi64.c	(revision 184894)
+++ src/x86/ffi64.c	(working copy)
@@ -1,7 +1,8 @@
 /* -----------------------------------------------------------------------
-   ffi64.c - Copyright (c) 2002, 2007  Bo Thorsen <bo@suse.de>
+   ffi64.c - Copyright (c) 20011  Anthony Green
              Copyright (c) 2008, 2010  Red Hat, Inc.
-   
+             Copyright (c) 2002, 2007  Bo Thorsen <bo@suse.de>
+             
    x86-64 Foreign Function Interface 
 
    Permission is hereby granted, free of charge, to any person obtaining
@@ -426,7 +427,7 @@
   /* If the return value is passed in memory, add the pointer as the
      first integer argument.  */
   if (ret_in_memory)
-    reg_args->gpr[gprcount++] = (long) rvalue;
+    reg_args->gpr[gprcount++] = (unsigned long) rvalue;
 
   avn = cif->nargs;
   arg_types = cif->arg_types;
@@ -498,12 +499,21 @@
 {
   volatile unsigned short *tramp;
 
+  /* Sanity check on the cif ABI.  */
+  {
+    int abi = cif->abi;
+    if (UNLIKELY (! (abi > FFI_FIRST_ABI && abi < FFI_LAST_ABI)))
+      return FFI_BAD_ABI;
+  }
+
   tramp = (volatile unsigned short *) &closure->tramp[0];
 
   tramp[0] = 0xbb49;		/* mov <code>, %r11	*/
-  *(void * volatile *) &tramp[1] = ffi_closure_unix64;
+  *((unsigned long long * volatile) &tramp[1])
+    = (unsigned long) ffi_closure_unix64;
   tramp[5] = 0xba49;		/* mov <data>, %r10	*/
-  *(void * volatile *) &tramp[6] = codeloc;
+  *((unsigned long long * volatile) &tramp[6])
+    = (unsigned long) codeloc;
 
   /* Set the carry bit iff the function uses any sse registers.
      This is clc or stc, together with the first byte of the jmp.  */
@@ -542,7 +552,7 @@
 	{
 	  /* The return value goes in memory.  Arrange for the closure
 	     return value to go directly back to the original caller.  */
-	  rvalue = (void *) reg_args->gpr[gprcount++];
+	  rvalue = (void *) (unsigned long) reg_args->gpr[gprcount++];
 	  /* We don't have to do anything in asm for the return.  */
 	  ret = FFI_TYPE_VOID;
 	}
Index: src/x86/ffitarget.h
===================================================================
--- src/x86/ffitarget.h	(revision 184894)
+++ src/x86/ffitarget.h	(working copy)
@@ -1,6 +1,7 @@
 /* -----------------------------------------------------------------*-C-*-
-   ffitarget.h - Copyright (c) 1996-2003, 2010  Red Hat, Inc.
-   Copyright (C) 2008  Free Software Foundation, Inc.
+   ffitarget.h - Copyright (c) 2012  Anthony Green
+                 Copyright (c) 1996-2003, 2010  Red Hat, Inc.
+                 Copyright (C) 2008  Free Software Foundation, Inc.
 
    Target configuration macros for x86 and x86-64.
 
@@ -29,8 +30,15 @@
 #ifndef LIBFFI_TARGET_H
 #define LIBFFI_TARGET_H
 
+#ifndef LIBFFI_H
+#error "Please do not include ffitarget.h directly into your source.  Use ffi.h instead."
+#endif
+
 /* ---- System specific configurations ----------------------------------- */
 
+/* For code common to all platforms on x86 and x86_64. */
+#define X86_ANY
+
 #if defined (X86_64) && defined (__i386__)
 #undef X86_64
 #define X86
@@ -53,9 +61,15 @@
 typedef long long              ffi_sarg;
 #endif
 #else
+#if defined __x86_64__ && !defined __LP64__
+#define FFI_SIZEOF_ARG 8
+typedef unsigned long long     ffi_arg;
+typedef long long              ffi_sarg;
+#else
 typedef unsigned long          ffi_arg;
 typedef signed long            ffi_sarg;
 #endif
+#endif
 
 typedef enum ffi_abi {
   FFI_FIRST_ABI = 0,
@@ -66,28 +80,26 @@
   FFI_STDCALL,
   FFI_THISCALL,
   FFI_FASTCALL,
+  FFI_LAST_ABI,
   /* TODO: Add fastcall support for the sake of completeness */
-  FFI_DEFAULT_ABI = FFI_SYSV,
-#endif
+  FFI_DEFAULT_ABI = FFI_SYSV
 
-#ifdef X86_WIN64
+#elif defined(X86_WIN64)
   FFI_WIN64,
-  FFI_DEFAULT_ABI = FFI_WIN64,
+  FFI_LAST_ABI,
+  FFI_DEFAULT_ABI = FFI_WIN64
+
 #else
-
   /* ---- Intel x86 and AMD x86-64 - */
-#if !defined(X86_WIN32) && (defined(__i386__) || defined(__x86_64__) || defined(__i386) || defined(__amd64))
   FFI_SYSV,
   FFI_UNIX64,   /* Unix variants all use the same ABI for x86-64  */
+  FFI_LAST_ABI,
 #if defined(__i386__) || defined(__i386)
-  FFI_DEFAULT_ABI = FFI_SYSV,
+  FFI_DEFAULT_ABI = FFI_SYSV
 #else
-  FFI_DEFAULT_ABI = FFI_UNIX64,
+  FFI_DEFAULT_ABI = FFI_UNIX64
 #endif
 #endif
-#endif /* X86_WIN64 */
-
-  FFI_LAST_ABI = FFI_DEFAULT_ABI + 1
 } ffi_abi;
 #endif
 
Index: src/x86/win32.S
===================================================================
--- src/x86/win32.S	(revision 184894)
+++ src/x86/win32.S	(working copy)
@@ -264,18 +264,6 @@
 #define RAW_CLOSURE_USER_DATA_OFFSET (RAW_CLOSURE_FUN_OFFSET + 4)
 #define CIF_FLAGS_OFFSET 20
 
-ffi_closure_raw_THISCALL PROC NEAR
-	push ebp
-	mov  ebp, esp
-	push esi
-	sub esp, 36
-	mov  esi, [eax + RAW_CLOSURE_CIF_OFFSET]        ;; closure->cif
-	mov  edx, [eax + RAW_CLOSURE_USER_DATA_OFFSET]  ;; closure->user_data
-	mov [esp + 12], edx
-	lea edx, [ebp + 12], edx
-	jmp stubraw
-ffi_closure_raw_SYSV ENDP
-
 ffi_closure_raw_SYSV PROC NEAR USES esi
     ;; the ffi_closure ctx is passed in eax by the trampoline.
 
@@ -284,7 +272,6 @@
         mov  edx, [eax + RAW_CLOSURE_USER_DATA_OFFSET]  ;; closure->user_data
         mov  [esp + 12], edx                            ;; user_data
         lea  edx, [ebp + 8]
-stubraw:
         mov  [esp + 8], edx                             ;; raw_args
         lea  edx, [ebp - 24]
         mov  [esp + 4], edx                             ;; &res
@@ -735,21 +722,7 @@
 #define RAW_CLOSURE_FUN_OFFSET (RAW_CLOSURE_CIF_OFFSET + 4)
 #define RAW_CLOSURE_USER_DATA_OFFSET (RAW_CLOSURE_FUN_OFFSET + 4)
 #define CIF_FLAGS_OFFSET 20
-        .balign 16
-	.globl	_ffi_closure_raw_THISCALL
-#ifndef __OS2__
-	.def	_ffi_closure_raw_THISCALL;	.scl	2;	.type	32;	.endef
-#endif
-_ffi_closure_raw_THISCALL:
-	pushl	%ebp
-	movl	%esp, %ebp
-	pushl	%esi
-	subl	$36, %esp
-	movl	RAW_CLOSURE_CIF_OFFSET(%eax), %esi	 /* closure->cif */
-	movl	RAW_CLOSURE_USER_DATA_OFFSET(%eax), %edx /* closure->user_data */
-	movl	%edx, 12(%esp)	/* user_data */
-	leal	12(%ebp), %edx	/* __builtin_dwarf_cfa () */
-	jmp	.stubraw
+
         # This assumes we are using gas.
         .balign 16
 	.globl	_ffi_closure_raw_SYSV
@@ -769,7 +742,6 @@
 	movl	RAW_CLOSURE_USER_DATA_OFFSET(%eax), %edx /* closure->user_data */
 	movl	%edx, 12(%esp)	/* user_data */
 	leal	8(%ebp), %edx	/* __builtin_dwarf_cfa () */
-.stubraw:
 	movl	%edx, 8(%esp)	/* raw_args */
 	leal	-24(%ebp), %edx
 	movl	%edx, 4(%esp)	/* &res */
Index: src/x86/ffi.c
===================================================================
--- src/x86/ffi.c	(revision 184894)
+++ src/x86/ffi.c	(working copy)
@@ -228,12 +228,10 @@
   switch (cif->rtype->type)
     {
     case FFI_TYPE_VOID:
-#if defined(X86) || defined (X86_WIN32) || defined(X86_FREEBSD) || defined(X86_DARWIN) || defined(X86_WIN64)
     case FFI_TYPE_UINT8:
     case FFI_TYPE_UINT16:
     case FFI_TYPE_SINT8:
     case FFI_TYPE_SINT16:
-#endif
 #ifdef X86_WIN64
     case FFI_TYPE_UINT32:
     case FFI_TYPE_SINT32:
@@ -364,27 +362,8 @@
     {
 #ifdef X86_WIN64
     case FFI_WIN64:
-      {
-        /* Make copies of all struct arguments
-           NOTE: not sure if responsibility should be here or in caller */
-        unsigned int i;
-        for (i=0; i < cif->nargs;i++) {
-          size_t size = cif->arg_types[i]->size;
-          if ((cif->arg_types[i]->type == FFI_TYPE_STRUCT
-               && (size != 1 && size != 2 && size != 4 && size != 8))
-#if FFI_TYPE_LONGDOUBLE != FFI_TYPE_DOUBLE
-              || cif->arg_types[i]->type == FFI_TYPE_LONGDOUBLE
-#endif
-              )
-            {
-              void *local = alloca(size);
-              memcpy(local, avalue[i], size);
-              avalue[i] = local;
-            }
-        }
-        ffi_call_win64(ffi_prep_args, &ecif, cif->bytes,
-                       cif->flags, ecif.rvalue, fn);
-      }
+      ffi_call_win64(ffi_prep_args, &ecif, cif->bytes,
+                     cif->flags, ecif.rvalue, fn);
       break;
 #elif defined(X86_WIN32)
     case FFI_SYSV:
@@ -447,8 +426,6 @@
 void FFI_HIDDEN ffi_closure_raw_SYSV (ffi_raw_closure *)
      __attribute__ ((regparm(1)));
 #ifdef X86_WIN32
-void FFI_HIDDEN ffi_closure_raw_THISCALL (ffi_raw_closure *)
-     __attribute__ ((regparm(1)));
 void FFI_HIDDEN ffi_closure_STDCALL (ffi_closure *)
      __attribute__ ((regparm(1)));
 void FFI_HIDDEN ffi_closure_THISCALL (ffi_closure *)
@@ -616,7 +593,7 @@
 { unsigned char *__tramp = (unsigned char*)(TRAMP); \
    unsigned int  __fun = (unsigned int)(FUN); \
    unsigned int  __ctx = (unsigned int)(CTX); \
-   unsigned int  __dis = __fun - (__ctx + 49);  \
+   unsigned int  __dis = __fun - (__ctx + 22);  \
    unsigned short __size = (unsigned short)(SIZE); \
    *(unsigned int *) &__tramp[0] = 0x8324048b;	/* mov (%esp), %eax */ \
    *(unsigned int *) &__tramp[4] = 0x4c890cec;	/* sub $12, %esp */ \
@@ -722,9 +699,6 @@
   int i;
 
   if (cif->abi != FFI_SYSV) {
-#ifdef X86_WIN32
-    if (cif->abi != FFI_THISCALL)
-#endif
     return FFI_BAD_ABI;
   }
 
@@ -739,20 +713,10 @@
       FFI_ASSERT (cif->arg_types[i]->type != FFI_TYPE_LONGDOUBLE);
     }
   
-#ifdef X86_WIN32
-  if (cif->abi == FFI_SYSV)
-    {
-#endif
+
   FFI_INIT_TRAMPOLINE (&closure->tramp[0], &ffi_closure_raw_SYSV,
                        codeloc);
-#ifdef X86_WIN32
-    }
-  else if (cif->abi == FFI_THISCALL)
-    {
-      FFI_INIT_TRAMPOLINE_THISCALL (&closure->tramp[0], &ffi_closure_raw_THISCALL,
-				    codeloc, cif->bytes);
-    }
-#endif
+    
   closure->cif  = cif;
   closure->user_data = user_data;
   closure->fun  = fun;
@@ -797,7 +761,7 @@
 #ifdef X86_WIN32
     case FFI_SYSV:
     case FFI_STDCALL:
-      ffi_call_win32(ffi_prep_args_raw, &ecif, cif->abi, cif->bytes, cif->flags,
+      ffi_call_win32(ffi_prep_args, &ecif, cif->abi, cif->bytes, cif->flags,
 		     ecif.rvalue, fn);
       break;
     case FFI_THISCALL:
@@ -825,7 +789,7 @@
 	  cif->abi = abi = FFI_THISCALL;
 	if (passed_regs < 1 && abi == FFI_THISCALL)
 	  cif->abi = abi = FFI_STDCALL;
-        ffi_call_win32(ffi_prep_args_raw, &ecif, abi, cif->bytes, cif->flags,
+        ffi_call_win32(ffi_prep_args, &ecif, abi, cif->bytes, cif->flags,
                        ecif.rvalue, fn);
       }
       break;
Index: src/x86/win64.S
===================================================================
--- src/x86/win64.S	(revision 184894)
+++ src/x86/win64.S	(working copy)
@@ -232,10 +232,18 @@
 ffi_call_win64 ENDP
 _TEXT	ENDS
 END
-#else        
+
+#else
+
+#ifdef SYMBOL_UNDERSCORE
+#define SYMBOL_NAME(name) _##name
+#else
+#define SYMBOL_NAME(name) name
+#endif
+
 .text
 
-.extern _ffi_closure_win64_inner
+.extern SYMBOL_NAME(ffi_closure_win64_inner)
 
 # ffi_closure_win64 will be called with these registers set:
 #    rax points to 'closure'
@@ -246,8 +254,8 @@
 # call ffi_closure_win64_inner for the actual work, then return the result.
 # 
 	.balign 16
-        .globl _ffi_closure_win64	
-_ffi_closure_win64:     
+        .globl SYMBOL_NAME(ffi_closure_win64)
+SYMBOL_NAME(ffi_closure_win64):
 	# copy register arguments onto stack
 	test	$1,%r11
 	jne	.Lfirst_is_float	
@@ -287,7 +295,7 @@
 	mov	%rax, %rcx	# context is first parameter
 	mov	%rsp, %rdx	# stack is second parameter
 	add	$48, %rdx	# point to start of arguments
-	mov	$_ffi_closure_win64_inner, %rax
+	mov	$SYMBOL_NAME(ffi_closure_win64_inner), %rax
 	callq	*%rax		# call the real closure function
 	add	$40, %rsp
 	movq	%rax, %xmm0	# If the closure returned a float,
@@ -296,8 +304,8 @@
 .ffi_closure_win64_end:
 
 	.balign 16
-        .globl	_ffi_call_win64
-_ffi_call_win64:        
+        .globl	SYMBOL_NAME(ffi_call_win64)
+SYMBOL_NAME(ffi_call_win64):
         # copy registers onto stack
 	mov	%r9,32(%rsp)
 	mov	%r8,24(%rsp)
Index: src/alpha/ffitarget.h
===================================================================
--- src/alpha/ffitarget.h	(revision 184894)
+++ src/alpha/ffitarget.h	(working copy)
@@ -1,5 +1,6 @@
 /* -----------------------------------------------------------------*-C-*-
-   ffitarget.h - Copyright (c) 1996-2003  Red Hat, Inc.
+   ffitarget.h - Copyright (c) 2012  Anthony Green
+                 Copyright (c) 1996-2003  Red Hat, Inc.
    Target configuration macros for Alpha.
 
    Permission is hereby granted, free of charge, to any person obtaining
@@ -27,6 +28,10 @@
 #ifndef LIBFFI_TARGET_H
 #define LIBFFI_TARGET_H
 
+#ifndef LIBFFI_H
+#error "Please do not include ffitarget.h directly into your source.  Use ffi.h instead."
+#endif
+
 #ifndef LIBFFI_ASM
 typedef unsigned long          ffi_arg;
 typedef signed long            ffi_sarg;
Index: src/alpha/ffi.c
===================================================================
--- src/alpha/ffi.c	(revision 184894)
+++ src/alpha/ffi.c	(working copy)
@@ -1,5 +1,6 @@
 /* -----------------------------------------------------------------------
-   ffi.c - Copyright (c) 1998, 2001, 2007, 2008  Red Hat, Inc.
+   ffi.c - Copyright (c) 2012  Anthony Green
+           Copyright (c) 1998, 2001, 2007, 2008  Red Hat, Inc.
    
    Alpha Foreign Function Interface 
 
@@ -178,6 +179,9 @@
 {
   unsigned int *tramp;
 
+  if (cif->abi != FFI_OSF)
+    return FFI_BAD_ABI;
+
   tramp = (unsigned int *) &closure->tramp[0];
   tramp[0] = 0x47fb0401;	/* mov $27,$1		*/
   tramp[1] = 0xa77b0010;	/* ldq $27,16($27)	*/
Index: src/m68k/ffitarget.h
===================================================================
--- src/m68k/ffitarget.h	(revision 184894)
+++ src/m68k/ffitarget.h	(working copy)
@@ -1,5 +1,6 @@
 /* -----------------------------------------------------------------*-C-*-
-   ffitarget.h - Copyright (c) 1996-2003  Red Hat, Inc.
+   ffitarget.h - Copyright (c) 2012  Anthony Green
+                 Copyright (c) 1996-2003  Red Hat, Inc.
    Target configuration macros for Motorola 68K.
 
    Permission is hereby granted, free of charge, to any person obtaining
@@ -27,6 +28,10 @@
 #ifndef LIBFFI_TARGET_H
 #define LIBFFI_TARGET_H
 
+#ifndef LIBFFI_H
+#error "Please do not include ffitarget.h directly into your source.  Use ffi.h instead."
+#endif
+
 #ifndef LIBFFI_ASM
 typedef unsigned long          ffi_arg;
 typedef signed long            ffi_sarg;
@@ -34,8 +39,8 @@
 typedef enum ffi_abi {
   FFI_FIRST_ABI = 0,
   FFI_SYSV,
-  FFI_DEFAULT_ABI = FFI_SYSV,
-  FFI_LAST_ABI = FFI_DEFAULT_ABI + 1
+  FFI_LAST_ABI,
+  FFI_DEFAULT_ABI = FFI_SYSV
 } ffi_abi;
 #endif
 
Index: src/m68k/ffi.c
===================================================================
--- src/m68k/ffi.c	(revision 184894)
+++ src/m68k/ffi.c	(working copy)
@@ -261,7 +261,8 @@
 		      void *user_data,
 		      void *codeloc)
 {
-  FFI_ASSERT (cif->abi == FFI_SYSV);
+  if (cif->abi != FFI_SYSV)
+    return FFI_BAD_ABI;
 
   *(unsigned short *)closure->tramp = 0x207c;
   *(void **)(closure->tramp + 2) = codeloc;
Index: src/avr32/ffitarget.h
===================================================================
--- src/avr32/ffitarget.h	(revision 184894)
+++ src/avr32/ffitarget.h	(working copy)
@@ -1,5 +1,6 @@
 /* -----------------------------------------------------------------*-C-*-
-   ffitarget.h - Copyright (c) 2009  Bradley Smith <brad@brad-smith.co.uk>
+   ffitarget.h - Copyright (c) 2012  Anthony Green
+                 Copyright (c) 2009  Bradley Smith <brad@brad-smith.co.uk>
    Target configuration macros for AVR32.
 
    Permission is hereby granted, free of charge, to any person obtaining
@@ -27,6 +28,10 @@
 #ifndef LIBFFI_TARGET_H
 #define LIBFFI_TARGET_H
 
+#ifndef LIBFFI_H
+#error "Please do not include ffitarget.h directly into your source.  Use ffi.h instead."
+#endif
+
 #ifndef LIBFFI_ASM
 typedef unsigned long          ffi_arg;
 typedef signed long            ffi_sarg;
@@ -34,8 +39,8 @@
 typedef enum ffi_abi {
   FFI_FIRST_ABI = 0,
   FFI_SYSV,
-  FFI_DEFAULT_ABI = FFI_SYSV,
-  FFI_LAST_ABI = FFI_DEFAULT_ABI + 1
+  FFI_LAST_ABI,
+  FFI_DEFAULT_ABI = FFI_SYSV
 } ffi_abi;
 #endif
 
Index: src/avr32/ffi.c
===================================================================
--- src/avr32/ffi.c	(revision 184894)
+++ src/avr32/ffi.c	(working copy)
@@ -1,5 +1,6 @@
 /* -----------------------------------------------------------------------
-   ffi.c - Copyright (c) 2009  Bradley Smith <brad@brad-smith.co.uk>
+   ffi.c - Copyright (c) 2011  Anthony Green
+           Copyright (c) 2009  Bradley Smith <brad@brad-smith.co.uk>
 
    AVR32 Foreign Function Interface
 
@@ -394,7 +395,8 @@
     void (*fun)(ffi_cif*, void*, void**, void*), void *user_data,
     void *codeloc)
 {
-    FFI_ASSERT(cif->abi == FFI_SYSV);
+    if (cif->abi != FFI_SYSV)
+      return FFI_BAD_ABI;
 
     unsigned char *__tramp = (unsigned char*)(&closure->tramp[0]);
     unsigned int  __fun = (unsigned int)(&ffi_closure_SYSV);
Index: src/frv/ffitarget.h
===================================================================
--- src/frv/ffitarget.h	(revision 184894)
+++ src/frv/ffitarget.h	(working copy)
@@ -1,5 +1,6 @@
 /* -----------------------------------------------------------------*-C-*-
-   ffitarget.h - Copyright (c) 1996-2004  Red Hat, Inc.
+   ffitarget.h - Copyright (c) 2012  Anthony Green
+                 Copyright (c) 1996-2004  Red Hat, Inc.
    Target configuration macros for FR-V
 
    Permission is hereby granted, free of charge, to any person obtaining
@@ -27,6 +28,10 @@
 #ifndef LIBFFI_TARGET_H
 #define LIBFFI_TARGET_H
 
+#ifndef LIBFFI_H
+#error "Please do not include ffitarget.h directly into your source.  Use ffi.h instead."
+#endif
+
 /* ---- System specific configurations ----------------------------------- */
 
 #ifndef LIBFFI_ASM
@@ -35,13 +40,9 @@
 
 typedef enum ffi_abi {
   FFI_FIRST_ABI = 0,
-
-#ifdef FRV
   FFI_EABI,
-  FFI_DEFAULT_ABI = FFI_EABI,
-#endif
-
-  FFI_LAST_ABI = FFI_DEFAULT_ABI + 1
+  FFI_LAST_ABI,
+  FFI_DEFAULT_ABI = FFI_EABI
 } ffi_abi;
 #endif
 
Index: src/s390/ffitarget.h
===================================================================
--- src/s390/ffitarget.h	(revision 184894)
+++ src/s390/ffitarget.h	(working copy)
@@ -1,5 +1,6 @@
 /* -----------------------------------------------------------------*-C-*-
-   ffitarget.h - Copyright (c) 1996-2003  Red Hat, Inc.
+   ffitarget.h - Copyright (c) 2012  Anthony Green
+                 Copyright (c) 1996-2003  Red Hat, Inc.
    Target configuration macros for S390.
 
    Permission is hereby granted, free of charge, to any person obtaining
@@ -27,6 +28,10 @@
 #ifndef LIBFFI_TARGET_H
 #define LIBFFI_TARGET_H
 
+#ifndef LIBFFI_H
+#error "Please do not include ffitarget.h directly into your source.  Use ffi.h instead."
+#endif
+
 #if defined (__s390x__)
 #ifndef S390X
 #define S390X
@@ -42,8 +47,8 @@
 typedef enum ffi_abi {
   FFI_FIRST_ABI = 0,
   FFI_SYSV,
-  FFI_DEFAULT_ABI = FFI_SYSV,
-  FFI_LAST_ABI = FFI_DEFAULT_ABI + 1
+  FFI_LAST_ABI,
+  FFI_DEFAULT_ABI = FFI_SYSV
 } ffi_abi;
 #endif
 
Index: src/cris/ffitarget.h
===================================================================
--- src/cris/ffitarget.h	(revision 184894)
+++ src/cris/ffitarget.h	(working copy)
@@ -1,5 +1,6 @@
 /* -----------------------------------------------------------------*-C-*-
-   ffitarget.h - Copyright (c) 1996-2003  Red Hat, Inc.
+   ffitarget.h - Copyright (c) 2012  Anthony Green
+                 Copyright (c) 1996-2003  Red Hat, Inc.
    Target configuration macros for CRIS.
 
    Permission is hereby granted, free of charge, to any person obtaining
@@ -27,6 +28,10 @@
 #ifndef LIBFFI_TARGET_H
 #define LIBFFI_TARGET_H
 
+#ifndef LIBFFI_H
+#error "Please do not include ffitarget.h directly into your source.  Use ffi.h instead."
+#endif
+
 #ifndef LIBFFI_ASM
 typedef unsigned long          ffi_arg;
 typedef signed long            ffi_sarg;
@@ -34,8 +39,8 @@
 typedef enum ffi_abi {
   FFI_FIRST_ABI = 0,
   FFI_SYSV,
-  FFI_DEFAULT_ABI = FFI_SYSV,
-  FFI_LAST_ABI = FFI_DEFAULT_ABI + 1
+  FFI_LAST_ABI,
+  FFI_DEFAULT_ABI = FFI_SYSV
 } ffi_abi;
 #endif
 
Index: src/cris/ffi.c
===================================================================
--- src/cris/ffi.c	(revision 184894)
+++ src/cris/ffi.c	(working copy)
@@ -153,21 +153,24 @@
   return (struct_count);
 }
 
-ffi_status
-ffi_prep_cif (ffi_cif * cif,
-	      ffi_abi abi, unsigned int nargs,
-	      ffi_type * rtype, ffi_type ** atypes)
+ffi_status FFI_HIDDEN
+ffi_prep_cif_core (ffi_cif * cif,
+	           ffi_abi abi, unsigned int isvariadic,
+		   unsigned int nfixedargs, unsigned int ntotalargs,
+	           ffi_type * rtype, ffi_type ** atypes)
 {
   unsigned bytes = 0;
   unsigned int i;
   ffi_type **ptr;
 
   FFI_ASSERT (cif != NULL);
-  FFI_ASSERT ((abi > FFI_FIRST_ABI) && (abi <= FFI_DEFAULT_ABI));
+  FFI_ASSERT((!isvariadic) || (nfixedargs >= 1));
+  FFI_ASSERT(nfixedargs <= ntotalargs);
+  FFI_ASSERT (abi > FFI_FIRST_ABI && abi < FFI_LAST_ABI);
 
   cif->abi = abi;
   cif->arg_types = atypes;
-  cif->nargs = nargs;
+  cif->nargs = ntotalargs;
   cif->rtype = rtype;
 
   cif->flags = 0;
Index: src/pa/ffitarget.h
===================================================================
--- src/pa/ffitarget.h	(revision 184894)
+++ src/pa/ffitarget.h	(working copy)
@@ -1,5 +1,6 @@
 /* -----------------------------------------------------------------*-C-*-
-   ffitarget.h - Copyright (c) 1996-2003  Red Hat, Inc.
+   ffitarget.h - Copyright (c) 2012  Anthony Green
+                 Copyright (c) 1996-2003  Red Hat, Inc.
    Target configuration macros for hppa.
 
    Permission is hereby granted, free of charge, to any person obtaining
@@ -27,6 +28,10 @@
 #ifndef LIBFFI_TARGET_H
 #define LIBFFI_TARGET_H
 
+#ifndef LIBFFI_H
+#error "Please do not include ffitarget.h directly into your source.  Use ffi.h instead."
+#endif
+
 /* ---- System specific configurations ----------------------------------- */
 
 #ifndef LIBFFI_ASM
@@ -38,21 +43,22 @@
 
 #ifdef PA_LINUX
   FFI_PA32,
-  FFI_DEFAULT_ABI = FFI_PA32,
+  FFI_LAST_ABI,
+  FFI_DEFAULT_ABI = FFI_PA32
 #endif
 
 #ifdef PA_HPUX
   FFI_PA32,
-  FFI_DEFAULT_ABI = FFI_PA32,
+  FFI_LAST_ABI,
+  FFI_DEFAULT_ABI = FFI_PA32
 #endif
 
 #ifdef PA64_HPUX
 #error "PA64_HPUX FFI is not yet implemented"
   FFI_PA64,
-  FFI_DEFAULT_ABI = FFI_PA64,
+  FFI_LAST_ABI,
+  FFI_DEFAULT_ABI = FFI_PA64
 #endif
-
-  FFI_LAST_ABI = FFI_DEFAULT_ABI + 1
 } ffi_abi;
 #endif
 
Index: src/pa/ffi.c
===================================================================
--- src/pa/ffi.c	(revision 184894)
+++ src/pa/ffi.c	(working copy)
@@ -1,9 +1,11 @@
 /* -----------------------------------------------------------------------
-   ffi.c - (c) 2003-2004 Randolph Chung <tausq@debian.org>
+   ffi.c - (c) 2011 Anthony Green
            (c) 2008 Red Hat, Inc.
-
+	   (c) 2006 Free Software Foundation, Inc.
+           (c) 2003-2004 Randolph Chung <tausq@debian.org>
+           
    HPPA Foreign Function Interface
-   HP-UX PA ABI support (c) 2006 Free Software Foundation, Inc.
+   HP-UX PA ABI support 
 
    Permission is hereby granted, free of charge, to any person obtaining
    a copy of this software and associated documentation files (the
@@ -633,7 +635,8 @@
   UINT32 *tmp;
 #endif
 
-  FFI_ASSERT (cif->abi == FFI_PA32);
+  if (cif->abi != FFI_PA32)
+    return FFI_BAD_ABI;
 
   /* Make a small trampoline that will branch to our
      handler function. Use PC-relative addressing.  */
Index: src/ia64/ffitarget.h
===================================================================
--- src/ia64/ffitarget.h	(revision 184894)
+++ src/ia64/ffitarget.h	(working copy)
@@ -1,5 +1,6 @@
 /* -----------------------------------------------------------------*-C-*-
-   ffitarget.h - Copyright (c) 1996-2003  Red Hat, Inc.
+   ffitarget.h - Copyright (c) 2012  Anthony Green
+                 Copyright (c) 1996-2003  Red Hat, Inc.
    Target configuration macros for IA-64.
 
    Permission is hereby granted, free of charge, to any person obtaining
@@ -27,6 +28,10 @@
 #ifndef LIBFFI_TARGET_H
 #define LIBFFI_TARGET_H
 
+#ifndef LIBFFI_H
+#error "Please do not include ffitarget.h directly into your source.  Use ffi.h instead."
+#endif
+
 #ifndef LIBFFI_ASM
 typedef unsigned long long          ffi_arg;
 typedef signed long long            ffi_sarg;
@@ -34,8 +39,8 @@
 typedef enum ffi_abi {
   FFI_FIRST_ABI = 0,
   FFI_UNIX,   	/* Linux and all Unix variants use the same conventions	*/
-  FFI_DEFAULT_ABI = FFI_UNIX,
-  FFI_LAST_ABI = FFI_DEFAULT_ABI + 1
+  FFI_LAST_ABI,
+  FFI_DEFAULT_ABI = FFI_UNIX
 } ffi_abi;
 #endif
 
Index: src/ia64/ffi.c
===================================================================
--- src/ia64/ffi.c	(revision 184894)
+++ src/ia64/ffi.c	(working copy)
@@ -1,6 +1,7 @@
 /* -----------------------------------------------------------------------
    ffi.c - Copyright (c) 1998, 2007, 2008, 2012 Red Hat, Inc.
 	   Copyright (c) 2000 Hewlett Packard Company
+	   Copyright (c) 2011 Anthony Green
    
    IA64 Foreign Function Interface 
 
@@ -429,7 +430,8 @@
   struct ffi_ia64_trampoline_struct *tramp;
   struct ia64_fd *fd;
 
-  FFI_ASSERT (cif->abi == FFI_UNIX);
+  if (cif->abi != FFI_UNIX)
+    return FFI_BAD_ABI;
 
   tramp = (struct ffi_ia64_trampoline_struct *)closure->tramp;
   fd = (struct ia64_fd *)(void *)ffi_closure_unix;
Index: src/java_raw_api.c
===================================================================
--- src/java_raw_api.c	(revision 184894)
+++ src/java_raw_api.c	(working copy)
@@ -311,7 +311,7 @@
   ffi_raw_closure *cl = (ffi_raw_closure*)user_data;
 
   ffi_java_ptrarray_to_raw (cif, avalue, raw);
-  (*cl->fun) (cif, rvalue, raw, cl->user_data);
+  (*cl->fun) (cif, rvalue, (ffi_raw*)raw, cl->user_data);
   ffi_java_raw_to_rvalue (cif, rvalue);
 }
 
Index: src/sparc/v9.S
===================================================================
--- src/sparc/v9.S	(revision 184894)
+++ src/sparc/v9.S	(working copy)
@@ -32,7 +32,7 @@
 /* Only compile this in for 64bit builds, because otherwise the object file
    will have inproper architecture due to used instructions.  */
 
-#define STACKFRAME 176		/* Minimum stack framesize for SPARC 64-bit */
+#define STACKFRAME 128		/* Minimum stack framesize for SPARC */
 #define STACK_BIAS 2047
 #define ARGS (128)		/* Offset of register area in frame */
 
Index: src/sparc/ffitarget.h
===================================================================
--- src/sparc/ffitarget.h	(revision 184894)
+++ src/sparc/ffitarget.h	(working copy)
@@ -1,5 +1,6 @@
 /* -----------------------------------------------------------------*-C-*-
-   ffitarget.h - Copyright (c) 1996-2003  Red Hat, Inc.
+   ffitarget.h - Copyright (c) 2012  Anthony Green
+                 Copyright (c) 1996-2003  Red Hat, Inc.
    Target configuration macros for SPARC.
 
    Permission is hereby granted, free of charge, to any person obtaining
@@ -27,6 +28,10 @@
 #ifndef LIBFFI_TARGET_H
 #define LIBFFI_TARGET_H
 
+#ifndef LIBFFI_H
+#error "Please do not include ffitarget.h directly into your source.  Use ffi.h instead."
+#endif
+
 /* ---- System specific configurations ----------------------------------- */
 
 #if defined(__arch64__) || defined(__sparcv9)
@@ -44,12 +49,12 @@
   FFI_V8,
   FFI_V8PLUS,
   FFI_V9,
+  FFI_LAST_ABI,
 #ifdef SPARC64
-  FFI_DEFAULT_ABI = FFI_V9,
+  FFI_DEFAULT_ABI = FFI_V9
 #else
-  FFI_DEFAULT_ABI = FFI_V8,
+  FFI_DEFAULT_ABI = FFI_V8
 #endif
-  FFI_LAST_ABI = FFI_DEFAULT_ABI + 1
 } ffi_abi;
 #endif
 
Index: src/sparc/ffi.c
===================================================================
--- src/sparc/ffi.c	(revision 184894)
+++ src/sparc/ffi.c	(working copy)
@@ -1,5 +1,6 @@
 /* -----------------------------------------------------------------------
-   ffi.c - Copyright (c) 1996, 2003, 2004, 2007, 2008 Red Hat, Inc.
+   ffi.c - Copyright (c) 2011 Anthony Green
+           Copyright (c) 1996, 2003-2004, 2007-2008 Red Hat, Inc.
    
    SPARC Foreign Function Interface 
 
@@ -406,9 +407,51 @@
       /* We don't yet support calling 32bit code from 64bit */
       FFI_ASSERT(0);
 #else
-      ffi_call_v8(ffi_prep_args_v8, &ecif, cif->bytes, 
-		  cif->flags, rvalue, fn);
+      if (rvalue && (cif->rtype->type == FFI_TYPE_STRUCT
+#if FFI_TYPE_LONGDOUBLE != FFI_TYPE_DOUBLE
+	  || cif->flags == FFI_TYPE_LONGDOUBLE
 #endif
+	  ))
+	{
+	  /* For v8, we need an "unimp" with size of returning struct */
+	  /* behind "call", so we alloc some executable space for it. */
+	  /* l7 is used, we need to make sure v8.S doesn't use %l7.   */
+	  unsigned int *call_struct = NULL;
+	  ffi_closure_alloc(32, &call_struct);
+	  if (call_struct)
+	    {
+	      unsigned long f = (unsigned long)fn;
+	      call_struct[0] = 0xae10001f;		 /* mov   %i7, %l7	 */
+	      call_struct[1] = 0xbe10000f;		 /* mov   %o7, %i7	 */
+	      call_struct[2] = 0x03000000 | f >> 10;     /* sethi %hi(fn), %g1	 */
+	      call_struct[3] = 0x9fc06000 | (f & 0x3ff); /* jmp %g1+%lo(fn), %o7 */
+	      call_struct[4] = 0x01000000;		 /* nop			 */
+	      if (cif->rtype->size < 0x7f)
+		call_struct[5] = cif->rtype->size;	 /* unimp		 */
+	      else
+		call_struct[5] = 0x01000000;	     	 /* nop			 */
+	      call_struct[6] = 0x81c7e008;		 /* ret			 */
+	      call_struct[7] = 0xbe100017;		 /* mov   %l7, %i7	 */
+	      asm volatile ("iflush %0; iflush %0+8; iflush %0+16; iflush %0+24" : :
+			    "r" (call_struct) : "memory");
+	      /* SPARC v8 requires 5 instructions for flush to be visible */
+	      asm volatile ("nop; nop; nop; nop; nop");
+	      ffi_call_v8(ffi_prep_args_v8, &ecif, cif->bytes,
+			  cif->flags, rvalue, call_struct);
+	      ffi_closure_free(call_struct);
+	    }
+	  else
+	    {
+	      ffi_call_v8(ffi_prep_args_v8, &ecif, cif->bytes,
+			  cif->flags, rvalue, fn);
+	    }
+	}
+      else
+	{
+	  ffi_call_v8(ffi_prep_args_v8, &ecif, cif->bytes,
+		      cif->flags, rvalue, fn);
+	}
+#endif
       break;
     case FFI_V9:
 #ifdef SPARC64
@@ -425,7 +468,6 @@
       FFI_ASSERT(0);
       break;
     }
-
 }
 
 
@@ -447,7 +489,8 @@
 #ifdef SPARC64
   /* Trampoline address is equal to the closure address.  We take advantage
      of that to reduce the trampoline size by 8 bytes. */
-  FFI_ASSERT (cif->abi == FFI_V9);
+  if (cif->abi != FFI_V9)
+    return FFI_BAD_ABI;
   fn = (unsigned long) ffi_closure_v9;
   tramp[0] = 0x83414000;	/* rd	%pc, %g1	*/
   tramp[1] = 0xca586010;	/* ldx	[%g1+16], %g5	*/
@@ -456,7 +499,8 @@
   *((unsigned long *) &tramp[4]) = fn;
 #else
   unsigned long ctx = (unsigned long) codeloc;
-  FFI_ASSERT (cif->abi == FFI_V8);
+  if (cif->abi != FFI_V8)
+    return FFI_BAD_ABI;
   fn = (unsigned long) ffi_closure_v8;
   tramp[0] = 0x03000000 | fn >> 10;	/* sethi %hi(fn), %g1	*/
   tramp[1] = 0x05000000 | ctx >> 10;	/* sethi %hi(ctx), %g2	*/
@@ -468,13 +512,13 @@
   closure->fun = fun;
   closure->user_data = user_data;
 
-  /* Flush the Icache.  FIXME: alignment isn't certain, assume 8 bytes */
+  /* Flush the Icache.  closure is 8 bytes aligned.  */
 #ifdef SPARC64
-  asm volatile ("flush	%0" : : "r" (closure) : "memory");
-  asm volatile ("flush	%0" : : "r" (((char *) closure) + 8) : "memory");
+  asm volatile ("flush	%0; flush %0+8" : : "r" (closure) : "memory");
 #else
-  asm volatile ("iflush	%0" : : "r" (closure) : "memory");
-  asm volatile ("iflush	%0" : : "r" (((char *) closure) + 8) : "memory");
+  asm volatile ("iflush	%0; iflush %0+8" : : "r" (closure) : "memory");
+  /* SPARC v8 requires 5 instructions for flush to be visible */
+  asm volatile ("nop; nop; nop; nop; nop");
 #endif
 
   return FFI_OK;
Index: src/mips/ffitarget.h
===================================================================
--- src/mips/ffitarget.h	(revision 184894)
+++ src/mips/ffitarget.h	(working copy)
@@ -1,5 +1,6 @@
 /* -----------------------------------------------------------------*-C-*-
-   ffitarget.h - Copyright (c) 1996-2003  Red Hat, Inc.
+   ffitarget.h - Copyright (c) 2012  Anthony Green
+                 Copyright (c) 1996-2003  Red Hat, Inc.
    Target configuration macros for MIPS.
 
    Permission is hereby granted, free of charge, to any person obtaining
@@ -27,6 +28,10 @@
 #ifndef LIBFFI_TARGET_H
 #define LIBFFI_TARGET_H
 
+#ifndef LIBFFI_H
+#error "Please do not include ffitarget.h directly into your source.  Use ffi.h instead."
+#endif
+
 #ifdef linux
 # include <asm/sgidefs.h>
 #elif defined(__rtems__)
@@ -36,7 +41,7 @@
 #define _MIPS_SIM_ABI32		1
 #define _MIPS_SIM_NABI32	2
 #define _MIPS_SIM_ABI64		3
-#else
+#elif !defined(__OpenBSD__)
 # include <sgidefs.h>
 #endif
 
@@ -51,7 +56,7 @@
 #  endif
 
 #if !defined(_MIPS_SIM)
--- something is very wrong --
+# error -- something is very wrong --
 #else
 #  if (_MIPS_SIM==_ABIN32 && defined(_ABIN32)) || (_MIPS_SIM==_ABI64 && defined(_ABI64))
 #    define FFI_MIPS_N32
@@ -59,7 +64,7 @@
 #    if (_MIPS_SIM==_ABIO32 && defined(_ABIO32))
 #      define FFI_MIPS_O32
 #    else
--- this is an unsupported platform --
+#     error -- this is an unsupported platform --
 #    endif
 #  endif
 #endif
@@ -194,30 +199,29 @@
   FFI_O32_SOFT_FLOAT,
   FFI_N32_SOFT_FLOAT,
   FFI_N64_SOFT_FLOAT,
+  FFI_LAST_ABI,
 
 #ifdef FFI_MIPS_O32
 #ifdef __mips_soft_float
-  FFI_DEFAULT_ABI = FFI_O32_SOFT_FLOAT,
+  FFI_DEFAULT_ABI = FFI_O32_SOFT_FLOAT
 #else
-  FFI_DEFAULT_ABI = FFI_O32,
+  FFI_DEFAULT_ABI = FFI_O32
 #endif
 #else
 # if _MIPS_SIM==_ABI64
 #  ifdef __mips_soft_float
-  FFI_DEFAULT_ABI = FFI_N64_SOFT_FLOAT,
+  FFI_DEFAULT_ABI = FFI_N64_SOFT_FLOAT
 #  else
-  FFI_DEFAULT_ABI = FFI_N64,
+  FFI_DEFAULT_ABI = FFI_N64
 #  endif
 # else
 #  ifdef __mips_soft_float
-  FFI_DEFAULT_ABI = FFI_N32_SOFT_FLOAT,
+  FFI_DEFAULT_ABI = FFI_N32_SOFT_FLOAT
 #  else
-  FFI_DEFAULT_ABI = FFI_N32,
+  FFI_DEFAULT_ABI = FFI_N32
 #  endif
 # endif
 #endif
-
-  FFI_LAST_ABI = FFI_DEFAULT_ABI + 1
 } ffi_abi;
 
 #define FFI_EXTRA_CIF_FIELDS unsigned rstruct_flag
Index: src/mips/ffi.c
===================================================================
--- src/mips/ffi.c	(revision 184894)
+++ src/mips/ffi.c	(working copy)
@@ -1,6 +1,7 @@
 /* -----------------------------------------------------------------------
-   ffi.c - Copyright (c) 1996, 2007, 2008  Red Hat, Inc.
-           Copyright (c) 2008       David Daney
+   ffi.c - Copyright (c) 2011  Anthony Green
+           Copyright (c) 2008  David Daney
+           Copyright (c) 1996, 2007, 2008, 2011  Red Hat, Inc.
    
    MIPS Foreign Function Interface 
 
@@ -37,7 +38,11 @@
 #endif
 
 #ifndef USE__BUILTIN___CLEAR_CACHE
-#include <sys/cachectl.h>
+#  if defined(__OpenBSD__)
+#    include <mips64/sysarch.h>
+#  else
+#    include <sys/cachectl.h>
+#  endif
 #endif
 
 #ifdef FFI_DEBUG
@@ -662,10 +667,12 @@
   char *clear_location = (char *) codeloc;
 
 #if defined(FFI_MIPS_O32)
-  FFI_ASSERT(cif->abi == FFI_O32 || cif->abi == FFI_O32_SOFT_FLOAT);
+  if (cif->abi != FFI_O32 && cif->abi != FFI_O32_SOFT_FLOAT)
+    return FFI_BAD_ABI;
   fn = ffi_closure_O32;
 #else /* FFI_MIPS_N32 */
-  FFI_ASSERT(cif->abi == FFI_N32 || cif->abi == FFI_N64);
+  if (cif->abi != FFI_N32 && cif->abi != FFI_N64)
+    return FFI_BAD_ABI;
   fn = ffi_closure_N32;
 #endif /* FFI_MIPS_O32 */
 
Index: src/prep_cif.c
===================================================================
--- src/prep_cif.c	(revision 184894)
+++ src/prep_cif.c	(working copy)
@@ -1,5 +1,6 @@
 /* -----------------------------------------------------------------------
-   prep_cif.c - Copyright (c) 1996, 1998, 2007  Red Hat, Inc.
+   prep_cif.c - Copyright (c) 2011, 2012  Anthony Green
+                Copyright (c) 1996, 1998, 2007  Red Hat, Inc.
 
    Permission is hereby granted, free of charge, to any person obtaining
    a copy of this software and associated documentation files (the
@@ -37,17 +38,21 @@
 {
   ffi_type **ptr;
 
-  FFI_ASSERT(arg != NULL);
+  if (UNLIKELY(arg == NULL || arg->elements == NULL))
+    return FFI_BAD_TYPEDEF;
 
-  FFI_ASSERT(arg->elements != NULL);
-  FFI_ASSERT(arg->size == 0);
-  FFI_ASSERT(arg->alignment == 0);
+  arg->size = 0;
+  arg->alignment = 0;
 
   ptr = &(arg->elements[0]);
 
+  if (UNLIKELY(ptr == 0))
+    return FFI_BAD_TYPEDEF;
+
   while ((*ptr) != NULL)
     {
-      if (((*ptr)->size == 0) && (initialize_aggregate((*ptr)) != FFI_OK))
+      if (UNLIKELY(((*ptr)->size == 0)
+		    && (initialize_aggregate((*ptr)) != FFI_OK)))
 	return FFI_BAD_TYPEDEF;
 
       /* Perform a sanity check on the argument type */
@@ -85,24 +90,38 @@
 /* Perform machine independent ffi_cif preparation, then call
    machine dependent routine. */
 
-ffi_status ffi_prep_cif(ffi_cif *cif, ffi_abi abi, unsigned int nargs,
-			ffi_type *rtype, ffi_type **atypes)
+/* For non variadic functions isvariadic should be 0 and
+   nfixedargs==ntotalargs.
+
+   For variadic calls, isvariadic should be 1 and nfixedargs
+   and ntotalargs set as appropriate. nfixedargs must always be >=1 */
+
+
+ffi_status FFI_HIDDEN ffi_prep_cif_core(ffi_cif *cif, ffi_abi abi,
+			     unsigned int isvariadic,
+                             unsigned int nfixedargs,
+                             unsigned int ntotalargs,
+			     ffi_type *rtype, ffi_type **atypes)
 {
   unsigned bytes = 0;
   unsigned int i;
   ffi_type **ptr;
 
   FFI_ASSERT(cif != NULL);
+  FFI_ASSERT((!isvariadic) || (nfixedargs >= 1));
+  FFI_ASSERT(nfixedargs <= ntotalargs);
+
 #ifndef X86_WIN32
-  FFI_ASSERT((abi > FFI_FIRST_ABI) && (abi <= FFI_DEFAULT_ABI));
+  if (! (abi > FFI_FIRST_ABI && abi < FFI_LAST_ABI))
+    return FFI_BAD_ABI;
 #else
-  FFI_ASSERT(abi > FFI_FIRST_ABI && abi <= FFI_DEFAULT_ABI
-	     || abi == FFI_THISCALL);
+  if (! (abi > FFI_FIRST_ABI && abi < FFI_LAST_ABI || abi == FFI_THISCALL))
+    return FFI_BAD_ABI;
 #endif
 
   cif->abi = abi;
   cif->arg_types = atypes;
-  cif->nargs = nargs;
+  cif->nargs = ntotalargs;
   cif->rtype = rtype;
 
   cif->flags = 0;
@@ -115,7 +134,7 @@
   FFI_ASSERT_VALID_TYPE(cif->rtype);
 
   /* x86, x86-64 and s390 stack space allocation is handled in prep_machdep. */
-#if !defined M68K && !defined __i386__ && !defined __x86_64__ && !defined S390 && !defined PA
+#if !defined M68K && !defined X86_ANY && !defined S390 && !defined PA
   /* Make space for the return structure pointer */
   if (cif->rtype->type == FFI_TYPE_STRUCT
 #ifdef SPARC
@@ -136,7 +155,7 @@
 	 check after the initialization.  */
       FFI_ASSERT_VALID_TYPE(*ptr);
 
-#if !defined __i386__ && !defined __x86_64__ && !defined S390 && !defined PA
+#if !defined X86_ANY && !defined S390 && !defined PA
 #ifdef SPARC
       if (((*ptr)->type == FFI_TYPE_STRUCT
 	   && ((*ptr)->size > 16 || cif->abi != FFI_V9))
@@ -158,10 +177,31 @@
   cif->bytes = bytes;
 
   /* Perform machine dependent cif processing */
+#ifdef FFI_TARGET_SPECIFIC_VARIADIC
+  if (isvariadic)
+	return ffi_prep_cif_machdep_var(cif, nfixedargs, ntotalargs);
+#endif
+
   return ffi_prep_cif_machdep(cif);
 }
 #endif /* not __CRIS__ */
 
+ffi_status ffi_prep_cif(ffi_cif *cif, ffi_abi abi, unsigned int nargs,
+			     ffi_type *rtype, ffi_type **atypes)
+{
+  return ffi_prep_cif_core(cif, abi, 0, nargs, nargs, rtype, atypes);
+}
+
+ffi_status ffi_prep_cif_var(ffi_cif *cif,
+                            ffi_abi abi,
+                            unsigned int nfixedargs,
+                            unsigned int ntotalargs,
+                            ffi_type *rtype,
+                            ffi_type **atypes)
+{
+  return ffi_prep_cif_core(cif, abi, 1, nfixedargs, ntotalargs, rtype, atypes);
+}
+
 #if FFI_CLOSURES
 
 ffi_status
Index: src/dlmalloc.c
===================================================================
--- src/dlmalloc.c	(revision 184894)
+++ src/dlmalloc.c	(working copy)
@@ -622,6 +622,9 @@
 #include "/usr/include/malloc.h"
 #else /* HAVE_USR_INCLUDE_MALLOC_H */
 
+/* HP-UX's stdlib.h redefines mallinfo unless _STRUCT_MALLINFO is defined */
+#define _STRUCT_MALLINFO
+
 struct mallinfo {
   MALLINFO_FIELD_TYPE arena;    /* non-mmapped space allocated from system */
   MALLINFO_FIELD_TYPE ordblks;  /* number of free chunks */
Index: src/sh/ffitarget.h
===================================================================
--- src/sh/ffitarget.h	(revision 184894)
+++ src/sh/ffitarget.h	(working copy)
@@ -1,5 +1,6 @@
 /* -----------------------------------------------------------------*-C-*-
-   ffitarget.h - Copyright (c) 1996-2003  Red Hat, Inc.
+   ffitarget.h - Copyright (c) 2012 Anthony Green
+                 Copyright (c) 1996-2003  Red Hat, Inc.
    Target configuration macros for SuperH.
 
    Permission is hereby granted, free of charge, to any person obtaining
@@ -27,6 +28,10 @@
 #ifndef LIBFFI_TARGET_H
 #define LIBFFI_TARGET_H
 
+#ifndef LIBFFI_H
+#error "Please do not include ffitarget.h directly into your source.  Use ffi.h instead."
+#endif
+
 /* ---- Generic type definitions ----------------------------------------- */
 
 #ifndef LIBFFI_ASM
@@ -36,8 +41,8 @@
 typedef enum ffi_abi {
   FFI_FIRST_ABI = 0,
   FFI_SYSV,
-  FFI_DEFAULT_ABI = FFI_SYSV,
-  FFI_LAST_ABI = FFI_DEFAULT_ABI + 1
+  FFI_LAST_ABI,
+  FFI_DEFAULT_ABI = FFI_SYSV
 } ffi_abi;
 #endif
 
Index: testsuite/libffi.call/return_sc.c
===================================================================
--- testsuite/libffi.call/return_sc.c	(revision 184894)
+++ testsuite/libffi.call/return_sc.c	(working copy)
@@ -30,7 +30,7 @@
        sc < (signed char) 127; sc++)
     {
       ffi_call(&cif, FFI_FN(return_sc), &rint, values);
-      CHECK(rint == (ffi_arg) sc);
+      CHECK((signed char)rint == sc);
     }
   exit(0);
 }
Index: testsuite/libffi.call/err_bad_abi.c
===================================================================
--- testsuite/libffi.call/err_bad_abi.c	(revision 184894)
+++ testsuite/libffi.call/err_bad_abi.c	(working copy)
@@ -4,7 +4,8 @@
    PR:			none.
    Originator:	Blake Chaffin 6/6/2007	 */
 
-/* { dg-do run { xfail *-*-* } } */
+/* { dg-do run } */
+
 #include "ffitest.h"
 
 static void
Index: testsuite/libffi.call/err_bad_typedef.c
===================================================================
--- testsuite/libffi.call/err_bad_typedef.c	(revision 184894)
+++ testsuite/libffi.call/err_bad_typedef.c	(working copy)
@@ -4,7 +4,8 @@
    PR:			none.
    Originator:	Blake Chaffin 6/6/2007	 */
 
-/* { dg-do run { xfail *-*-* } } */
+/* { dg-do run } */
+
 #include "ffitest.h"
 
 int main (void)
Index: testsuite/libffi.call/cls_longdouble_va.c
===================================================================
--- testsuite/libffi.call/cls_longdouble_va.c	(revision 184894)
+++ testsuite/libffi.call/cls_longdouble_va.c	(working copy)
@@ -37,7 +37,8 @@
 	arg_types[1] = &ffi_type_longdouble;
 	arg_types[2] = NULL;
 
-	CHECK(ffi_prep_cif(&cif, FFI_DEFAULT_ABI, 2, &ffi_type_sint,
+	/* This printf call is variadic */
+	CHECK(ffi_prep_cif_var(&cif, FFI_DEFAULT_ABI, 1, 2, &ffi_type_sint,
 		arg_types) == FFI_OK);
 
 	args[0] = &format;
@@ -49,6 +50,10 @@
 	printf("res: %d\n", (int) res);
 	// { dg-output "\nres: 4" }
 
+	/* The call to cls_longdouble_va_fn is static, so have to use a normal prep_cif */
+	CHECK(ffi_prep_cif(&cif, FFI_DEFAULT_ABI, 2, &ffi_type_sint,
+		arg_types) == FFI_OK);
+
 	CHECK(ffi_prep_closure_loc(pcl, &cif, cls_longdouble_va_fn, NULL, code) == FFI_OK);
 
 	res	= ((int(*)(char*, long double))(code))(format, ldArg);
Index: testsuite/libffi.call/cls_double_va.c
===================================================================
--- testsuite/libffi.call/cls_double_va.c	(revision 184894)
+++ testsuite/libffi.call/cls_double_va.c	(working copy)
@@ -37,7 +37,8 @@
 	arg_types[1] = &ffi_type_double;
 	arg_types[2] = NULL;
 
-	CHECK(ffi_prep_cif(&cif, FFI_DEFAULT_ABI, 2, &ffi_type_sint,
+	/* This printf call is variadic */
+	CHECK(ffi_prep_cif_var(&cif, FFI_DEFAULT_ABI, 1, 2, &ffi_type_sint,
 		arg_types) == FFI_OK);
 
 	args[0] = &format;
@@ -49,6 +50,9 @@
 	printf("res: %d\n", (int) res);
 	// { dg-output "\nres: 4" }
 
+	/* The call to cls_double_va_fn is static, so have to use a normal prep_cif */
+	CHECK(ffi_prep_cif(&cif, FFI_DEFAULT_ABI, 2, &ffi_type_sint, arg_types) == FFI_OK);
+
 	CHECK(ffi_prep_closure_loc(pcl, &cif, cls_double_va_fn, NULL, code) == FFI_OK);
 
 	res	= ((int(*)(char*, double))(code))(format, doubleArg);
Index: testsuite/libffi.call/float_va.c
===================================================================
--- testsuite/libffi.call/float_va.c	(revision 0)
+++ testsuite/libffi.call/float_va.c	(revision 0)
@@ -0,0 +1,107 @@
+/* Area:        fp and variadics
+   Purpose:     check fp inputs and returns work on variadics, even the fixed params
+   Limitations: None
+   PR:          none
+   Originator:  <david.gilbert@linaro.org> 2011-01-25
+
+   Intended to stress the difference in ABI on ARM vfp
+*/
+
+/* { dg-do run } */
+
+#include <stdarg.h>
+
+#include "ffitest.h"
+
+/* prints out all the parameters, and returns the sum of them all.
+ * 'x' is the number of variadic parameters all of which are double in this test
+ */
+double float_va_fn(unsigned int x, double y,...)
+{
+  double total=0.0;
+  va_list ap;
+  unsigned int i;
+
+  total+=(double)x;
+  total+=y;
+
+  printf("%u: %.1lf :", x, y);
+
+  va_start(ap, y);
+  for(i=0;i<x;i++)
+  {
+    double arg=va_arg(ap, double);
+    total+=arg;
+    printf(" %d:%.1lf ", i, arg);
+  }
+  va_end(ap);
+
+  printf(" total: %.1lf\n", total);
+
+  return total;
+}
+
+int main (void)
+{
+  ffi_cif    cif;
+
+  ffi_type    *arg_types[5];
+  void        *values[5];
+  double        doubles[5];
+  unsigned int firstarg;
+  double        resfp;
+
+  /* First test, pass float_va_fn(0,2.0) - note there are no actual
+   * variadic parameters, but it's declared variadic so the ABI may be
+   * different. */
+  /* Call it statically and then via ffi */
+  resfp=float_va_fn(0,2.0);
+  // { dg-output "0: 2.0 : total: 2.0" }
+  printf("compiled: %.1lf\n", resfp);
+  // { dg-output "\ncompiled: 2.0" }
+
+  arg_types[0] = &ffi_type_uint;
+  arg_types[1] = &ffi_type_double;
+  arg_types[2] = NULL;
+  CHECK(ffi_prep_cif_var(&cif, FFI_DEFAULT_ABI, 2, 2,
+        &ffi_type_double, arg_types) == FFI_OK);
+
+  firstarg = 0;
+  doubles[0] = 2.0;
+  values[0] = &firstarg;
+  values[1] = &doubles[0];
+  ffi_call(&cif, FFI_FN(float_va_fn), &resfp, values);
+  // { dg-output "\n0: 2.0 : total: 2.0" }
+  printf("ffi: %.1lf\n", resfp);
+  // { dg-output "\nffi: 2.0" }
+
+  /* Second test, float_va_fn(2,2.0,3.0,4.0), now with variadic params */
+  /* Call it statically and then via ffi */
+  resfp=float_va_fn(2,2.0,3.0,4.0);
+  // { dg-output "\n2: 2.0 : 0:3.0  1:4.0  total: 11.0" }
+  printf("compiled: %.1lf\n", resfp);
+  // { dg-output "\ncompiled: 11.0" }
+
+  arg_types[0] = &ffi_type_uint;
+  arg_types[1] = &ffi_type_double;
+  arg_types[2] = &ffi_type_double;
+  arg_types[3] = &ffi_type_double;
+  arg_types[4] = NULL;
+  CHECK(ffi_prep_cif_var(&cif, FFI_DEFAULT_ABI, 2, 4,
+        &ffi_type_double, arg_types) == FFI_OK);
+
+  firstarg = 2;
+  doubles[0] = 2.0;
+  doubles[1] = 3.0;
+  doubles[2] = 4.0;
+  values[0] = &firstarg;
+  values[1] = &doubles[0];
+  values[2] = &doubles[1];
+  values[3] = &doubles[2];
+  ffi_call(&cif, FFI_FN(float_va_fn), &resfp, values);
+  // { dg-output "\n2: 2.0 : 0:3.0  1:4.0  total: 11.0" }
+  printf("ffi: %.1lf\n", resfp);
+  // { dg-output "\nffi: 11.0" }
+
+  exit(0);
+}
Index: README
===================================================================
--- README	(revision 184894)
+++ README	(working copy)
@@ -1,10 +1,7 @@
-This directory contains the libffi package, which is not part of GCC but
-shipped with GCC as convenience.
-
 Status
 ======
 
-libffi-3.0.9 was released on December 31, 2009. Check the libffi web
+libffi-3.0.11 was released on *****************. Check the libffi web
 page for updates: <URL:http://sourceware.org/libffi/>.
 
 
@@ -46,7 +43,7 @@
 For specific configuration details and testing status, please
 refer to the wiki page here:
 
- http://www.moxielogic.org/wiki/index.php?title=Libffi_3.0.9
+ http://www.moxielogic.org/wiki/index.php?title=Libffi_3.0.11
 
 At the time of release, the following basic configurations have been
 tested:
@@ -55,13 +52,18 @@
 | Architecture | Operating System |
 |--------------+------------------|
 | Alpha        | Linux            |
+| Alpha        | Tru64            |
 | ARM          | Linux            |
+| ARM          | iOS              |
 | AVR32        | Linux            |
 | HPPA         | HPUX             |
 | IA-64        | Linux            |
+| M68K         | RTEMS            |
 | MIPS         | IRIX             |
 | MIPS         | Linux            |
+| MIPS         | RTEMS            |
 | MIPS64       | Linux            |
+| PowerPC      | AMIGA            |
 | PowerPC      | Linux            |
 | PowerPC      | Mac OSX          |
 | PowerPC      | FreeBSD          |
@@ -73,8 +75,10 @@
 | SPARC64      | Linux            |
 | SPARC64      | FreeBSD          |
 | X86          | FreeBSD          |
+| X86          | Interix          |
 | X86          | kFreeBSD         |
 | X86          | Linux            |
+| X86          | Linux/x32        |
 | X86          | Mac OSX          |
 | X86          | OpenBSD          |
 | X86          | OS/2             |
@@ -84,6 +88,7 @@
 | X86-64       | FreeBSD          |
 | X86-64       | Linux            |
 | X86-64       | OpenBSD          |
+| X86-64       | Windows/MingW    |
 |--------------+------------------|
 
 Please send additional platform test results to
@@ -115,10 +120,16 @@
 Microsoft's Visual C++ compiler.  In this case, use the msvcc.sh
 wrapper script during configuration like so:
 
-path/to/configure --enable-shared --enable-static \
-	CC=path/to/msvcc.sh LD=link \
-	CPP=\"cl -nologo -EP\"
+path/to/configure CC=path/to/msvcc.sh LD=link CPP=\"cl -nologo -EP\"
 
+For 64-bit Windows builds, use CC="path/to/msvcc.sh -m64".
+You may also need to specify --build appropriately. When building with MSVC
+under a MingW environment, you may need to remove the line in configure
+that sets 'fix_srcfile_path' to a 'cygpath' command. ('cygpath' is not
+present in MingW, and is not required when using MingW-style paths.)
+
+For iOS builds, refer to the build-ios.sh script for guidance.
+
 Configure has many other options. Use "configure --help" to see them all.
 
 Once configure has finished, type "make". Note that you must be using
@@ -135,11 +146,27 @@
 
 See the ChangeLog files for details.
 
-3.0.10 ???-??-??
+3.0.11 MMM-DD-YY
+        Lots of build fixes.
+        Add Amiga newer MacOS support.
+	Add Linux/x32 support.
+	Add thiscall and fastcall support on Windows.
+	Fix Octeon and MC68881 support.
+	Fix code pessimizations.
+
+3.0.10 Aug-23-11
+        Add support for Apple's iOS.
+	Add support for ARM VFP ABI.
+        Add RTEMS support for MIPS and M68K.
+	Fix instruction cache clearing problems on
+	  ARM and SPARC.
 	Fix the N64 build on mips-sgi-irix6.5.
+	Enable builds with Microsoft's compiler.
+	Enable x86 builds with Oracle's Solaris compiler.
+	Fix support for calling code compiled with Oracle's Sparc
+	  Solaris compiler.
 	Testsuite fixes for Tru64 Unix.
-	Enable builds with Microsoft's compiler.
-	Enable x86 builds with Sun's compiler.
+	Additional platform support.
 
 3.0.9 Dec-31-09
         Add AVR32 and win64 ports.  Add ARM softfp support.
@@ -320,5 +347,6 @@
 The list above is almost certainly incomplete and inaccurate.  I'm
 happy to make corrections or additions upon request.
 
-If you have a problem, or have found a bug, please send a note to
-green@redhat.com.
+If you have a problem, or have found a bug, please send a note to the
+author at green@moxielogic.com, or the project mailing list at
+libffi-discuss@sourceware.org.
Index: build-ios.sh
===================================================================
--- build-ios.sh	(revision 0)
+++ build-ios.sh	(revision 0)
@@ -0,0 +1,67 @@
+#!/bin/sh
+
+PLATFORM_IOS=/Developer/Platforms/iPhoneOS.platform/
+PLATFORM_IOS_SIM=/Developer/Platforms/iPhoneSimulator.platform/
+SDK_IOS_VERSION="4.2"
+MIN_IOS_VERSION="3.0"
+OUTPUT_DIR="universal-ios"
+
+build_target () {
+    local platform=$1
+    local sdk=$2
+    local arch=$3
+    local triple=$4
+    local builddir=$5
+
+    mkdir -p "${builddir}"
+    pushd "${builddir}"
+    export CC="${platform}"/Developer/usr/bin/gcc-4.2
+    export CFLAGS="-arch ${arch} -isysroot ${sdk} -miphoneos-version-min=${MIN_IOS_VERSION}"
+    ../configure --host=${triple} && make
+    popd
+}
+
+# Build all targets
+build_target "${PLATFORM_IOS}" "${PLATFORM_IOS}/Developer/SDKs/iPhoneOS${SDK_IOS_VERSION}.sdk/" armv6 arm-apple-darwin10 armv6-ios
+build_target "${PLATFORM_IOS}" "${PLATFORM_IOS}/Developer/SDKs/iPhoneOS${SDK_IOS_VERSION}.sdk/" armv7 arm-apple-darwin10 armv7-ios
+build_target "${PLATFORM_IOS_SIM}" "${PLATFORM_IOS_SIM}/Developer/SDKs/iPhoneSimulator${SDK_IOS_VERSION}.sdk/" i386 i386-apple-darwin10 i386-ios-sim
+
+# Create universal output directories
+mkdir -p "${OUTPUT_DIR}"
+mkdir -p "${OUTPUT_DIR}/include"
+mkdir -p "${OUTPUT_DIR}/include/armv6"
+mkdir -p "${OUTPUT_DIR}/include/armv7"
+mkdir -p "${OUTPUT_DIR}/include/i386"
+
+# Create the universal binary
+lipo -create armv6-ios/.libs/libffi.a armv7-ios/.libs/libffi.a i386-ios-sim/.libs/libffi.a -output "${OUTPUT_DIR}/libffi.a"
+
+# Copy in the headers
+copy_headers () {
+    local src=$1
+    local dest=$2
+
+    # Fix non-relative header reference
+    sed 's/<ffitarget.h>/"ffitarget.h"/' < "${src}/include/ffi.h" > "${dest}/ffi.h"
+    cp "${src}/include/ffitarget.h" "${dest}"
+}
+
+copy_headers armv6-ios "${OUTPUT_DIR}/include/armv6"
+copy_headers armv7-ios "${OUTPUT_DIR}/include/armv7"
+copy_headers i386-ios-sim "${OUTPUT_DIR}/include/i386"
+
+# Create top-level header
+(
+cat << EOF
+#ifdef __arm__
+  #include <arm/arch.h>
+  #ifdef _ARM_ARCH_6
+    #include "include/armv6/ffi.h"
+  #elif _ARM_ARCH_7
+    #include "include/armv7/ffi.h"
+  #endif
+#elif defined(__i386__)
+  #include "include/i386/ffi.h"
+#endif
+EOF
+) > "${OUTPUT_DIR}/ffi.h"

Property changes on: build-ios.sh
___________________________________________________________________
Added: svn:executable
   + *

Index: doc/libffi.texi
===================================================================
--- doc/libffi.texi	(revision 184894)
+++ doc/libffi.texi	(working copy)
@@ -19,7 +19,7 @@
 This manual is for Libffi, a portable foreign-function interface
 library.
 
-Copyright @copyright{} 2008, 2010 Red Hat, Inc.
+Copyright @copyright{} 2008, 2010, 2011 Red Hat, Inc.
 
 @quotation
 Permission is granted to copy, distribute and/or modify this document
@@ -133,8 +133,6 @@
 you want.  @ref{Multiple ABIs} for more information.
 
 @var{nargs} is the number of arguments that this function accepts.
-@samp{libffi} does not yet handle varargs functions; see @ref{Missing
-Features} for more information.
 
 @var{rtype} is a pointer to an @code{ffi_type} structure that
 describes the return type of the function.  @xref{Types}.
@@ -150,7 +148,31 @@
 is invalid.
 @end defun
 
+If the function being called is variadic (varargs) then
+@code{ffi_prep_cif_var} must be used instead of @code{ffi_prep_cif}.
 
+@findex ffi_prep_cif_var
+@defun ffi_status ffi_prep_cif_var (ffi_cif *@var{cif}, ffi_abi var{abi}, unsigned int @var{nfixedargs}, unsigned int var{ntotalargs}, ffi_type *@var{rtype}, ffi_type **@var{argtypes})
+This initializes @var{cif} according to the given parameters for
+a call to a variadic function.  In general it's operation is the
+same as for @code{ffi_prep_cif} except that:
+
+@var{nfixedargs} is the number of fixed arguments, prior to any
+variadic arguments.  It must be greater than zero.
+
+@var{ntotalargs} the total number of arguments, including variadic
+and fixed arguments.
+
+Note that, different cif's must be prepped for calls to the same
+function when different numbers of arguments are passed.
+
+Also note that a call to @code{ffi_prep_cif_var} with
+@var{nfixedargs}=@var{nototalargs} is NOT equivalent to a call to
+@code{ffi_prep_cif}.
+
+@end defun
+
+
 To call a function using an initialized @code{ffi_cif}, use the
 @code{ffi_call} function:
 
@@ -171,7 +193,9 @@
 @var{avalues} is a vector of @code{void *} pointers that point to the
 memory locations holding the argument values for a call.  If @var{cif}
 declares that the function has no arguments (i.e., @var{nargs} was 0),
-then @var{avalues} is ignored.
+then @var{avalues} is ignored.  Note that argument values may be
+modified by the callee (for instance, structs passed by value); the
+burden of copying pass-by-value arguments is placed on the caller.
 @end defun
 
 
@@ -570,9 +594,7 @@
 
 @itemize @bullet
 @item
-There is no support for calling varargs functions.  This may work on
-some platforms, depending on how the ABI is defined, but it is not
-reliable.
+Variadic closures.
 
 @item
 There is no support for bit fields in structures.
@@ -589,6 +611,8 @@
 @c anything else?
 @end itemize
 
+Note that variadic support is very new and tested on a relatively
+small number of platforms.
 
 @node Index
 @unnumbered Index
Index: man/ffi_prep_cif.3
===================================================================
--- man/ffi_prep_cif.3	(revision 184894)
+++ man/ffi_prep_cif.3	(working copy)
@@ -37,7 +37,9 @@
 points to an
 .Nm ffi_type
 that describes the data type, size and alignment of the
-return value.
+return value. Note that to call a variadic function
+.Nm ffi_prep_cif_var
+must be used instead.
 .Sh RETURN VALUES
 Upon successful completion,
 .Nm ffi_prep_cif
@@ -63,4 +65,6 @@
 .
 .Sh SEE ALSO
 .Xr ffi 3 ,
-.Xr ffi_call 3 
+.Xr ffi_call 3 ,
+.Xr ffi_prep_cif_var 3
+
Index: man/ffi_prep_cif_var.3
===================================================================
--- man/ffi_prep_cif_var.3	(revision 0)
+++ man/ffi_prep_cif_var.3	(revision 0)
@@ -0,0 +1,73 @@
+.Dd January 25, 2011
+.Dt ffi_prep_cif_var 3
+.Sh NAME
+.Nm ffi_prep_cif_var
+.Nd Prepare a
+.Nm ffi_cif
+structure for use with
+.Nm ffi_call
+for variadic functions.
+.Sh SYNOPSIS
+.In ffi.h
+.Ft ffi_status
+.Fo ffi_prep_cif_var
+.Fa "ffi_cif *cif"
+.Fa "ffi_abi abi"
+.Fa "unsigned int nfixedargs"
+.Fa "unsigned int ntotalargs"
+.Fa "ffi_type *rtype"
+.Fa "ffi_type **atypes"
+.Fc
+.Sh DESCRIPTION
+The
+.Nm ffi_prep_cif_var
+function prepares a
+.Nm ffi_cif
+structure for use with
+.Nm ffi_call
+for variadic functions.
+.Fa abi
+specifies a set of calling conventions to use.
+.Fa atypes
+is an array of
+.Fa ntotalargs
+pointers to
+.Nm ffi_type
+structs that describe the data type, size and alignment of each argument.
+.Fa rtype
+points to an
+.Nm ffi_type
+that describes the data type, size and alignment of the
+return value.
+.Fa nfixedargs
+must contain the number of fixed (non-variadic) arguments.
+Note that to call a non-variadic function
+.Nm ffi_prep_cif
+must be used.
+.Sh RETURN VALUES
+Upon successful completion,
+.Nm ffi_prep_cif_var
+returns
+.Nm FFI_OK .
+It will return
+.Nm FFI_BAD_TYPEDEF
+if
+.Fa cif
+is
+.Nm NULL
+or
+.Fa atypes
+or
+.Fa rtype
+is malformed. If
+.Fa abi
+does not refer to a valid ABI,
+.Nm FFI_BAD_ABI
+will be returned. Available ABIs are
+defined in
+.Nm <ffitarget.h>
+.
+.Sh SEE ALSO
+.Xr ffi 3 ,
+.Xr ffi_call 3 ,
+.Xr ffi_prep_cif 3
Index: man/ffi.3
===================================================================
--- man/ffi.3	(revision 184894)
+++ man/ffi.3	(working copy)
@@ -16,6 +16,15 @@
 .Fa "ffi_type **atypes"
 .Fc
 .Ft void
+.Fo ffi_prep_cif_var
+.Fa "ffi_cif *cif"
+.Fa "ffi_abi abi"
+.Fa "unsigned int nfixedargs"
+.Fa "unsigned int ntotalargs"
+.Fa "ffi_type *rtype"
+.Fa "ffi_type **atypes"
+.Fc
+.Ft void
 .Fo ffi_call
 .Fa "ffi_cif *cif"
 .Fa "void (*fn)(void)"
@@ -28,4 +37,5 @@
 the called function's interface at compile time.
 .Sh SEE ALSO
 .Xr ffi_prep_cif 3 ,
+.Xr ffi_prep_cif_var 3 ,
 .Xr ffi_call 3
Index: LICENSE
===================================================================
--- LICENSE	(revision 184894)
+++ LICENSE	(working copy)
@@ -1,4 +1,5 @@
-libffi - Copyright (c) 1996-2003  Red Hat, Inc.
+libffi - Copyright (c) 1996-2012  Anthony Green, Red Hat, Inc and others.
+See source files for details.
 
 Permission is hereby granted, free of charge, to any person obtaining
 a copy of this software and associated documentation files (the
@@ -8,13 +9,13 @@
 permit persons to whom the Software is furnished to do so, subject to
 the following conditions:
 
-The above copyright notice and this permission notice shall be included
-in all copies or substantial portions of the Software.
+The above copyright notice and this permission notice shall be
+included in all copies or substantial portions of the Software.
 
-THE SOFTWARE IS PROVIDED ``AS IS'', WITHOUT WARRANTY OF ANY KIND, EXPRESS
-OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+THE SOFTWARE IS PROVIDED ``AS IS'', WITHOUT WARRANTY OF ANY KIND,
+EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
 MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
-IN NO EVENT SHALL CYGNUS SOLUTIONS BE LIABLE FOR ANY CLAIM, DAMAGES OR
-OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
-ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
-OTHER DEALINGS IN THE SOFTWARE.
+IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY
+CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT,
+TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE
+SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
