@@ -40,6 +40,7 @@ struct ethtool_cmd {
__u8 eth_tp_mdix;
__u8 reserved2;
__u32 lp_advertising; /* Features the link partner advertises */
+ __u32 eee; /* Energy-Efficient Etehrnet */
__u32 reserved[2];
};
@@ -786,6 +787,8 @@ enum ethtool_sfeatures_retval_bits {
#define ETHTOOL_SET_DUMP 0x0000003e /* Set dump settings */
#define ETHTOOL_GET_DUMP_FLAG 0x0000003f /* Get dump settings */
#define ETHTOOL_GET_DUMP_DATA 0x00000040 /* Get dump data */
+#define ETHTOOL_GEEE 0x00000041 /* Get EEE */
+#define ETHTOOL_SEEE 0x00000042 /* Set EEE */
/* compatibility with older code */
#define SPARC_ETH_GSET ETHTOOL_GSET
@@ -1840,6 +1840,18 @@ static int do_gset(struct cmd_context *ctx)
} else if (errno != EOPNOTSUPP) {
perror("Cannot get link status");
}
+ edata.cmd = ETHTOOL_GEEE;
+ err = send_ioctl(ctx, &edata);
+ if (err == 0) {
+ fprintf(stdout, " Energy-Efficient Ethernet: %s\n",
+ edata.data ? "enabled" : "disabled");
+ allfail = 0;
+ } else if (errno != EOPNOTSUPP) {
+ perror("Cannot get EEE feature");
+ } else if (errno == EOPNOTSUPP) {
+ fprintf(stdout, " Energy-Efficient Ethernet:"
+ " not supported\n");
+ }
if (allfail) {
fprintf(stdout, "No data available\n");
@@ -1857,6 +1869,8 @@ static int do_sset(struct cmd_context *ctx)
int phyad_wanted = -1;
int xcvr_wanted = -1;
int advertising_wanted = -1;
+ int eee_wanted = -1;
+ int eee_changed = 0;
int gset_changed = 0; /* did anything in GSET change? */
u32 wol_wanted = 0;
int wol_change = 0;
@@ -1983,6 +1997,17 @@ static int do_sset(struct cmd_context *ctx)
ARRAY_SIZE(cmdline_msglvl));
break;
}
+ } else if (!strcmp(argp[i], "eee")) {
+ eee_changed = 1;
+ i++;
+ if (i >= argc)
+ exit_bad_args();
+ if (!strcmp(argp[i], "on"))
+ eee_wanted = 1;
+ else if (!strcmp(argp[i], "off"))
+ eee_wanted = 0;
+ else
+ exit_bad_args();
} else {
exit_bad_args();
}
@@ -2129,6 +2154,23 @@ static int do_sset(struct cmd_context *ctx)
}
}
+ if (eee_changed) {
+ struct ethtool_value edata;
+
+ edata.cmd = ETHTOOL_GEEE;
+ err = send_ioctl(ctx, &edata);
+ if (err < 0)
+ perror("Cannot get current EEE settings");
+ else {
+ edata.cmd = ETHTOOL_SEEE;
+ edata.data = eee_wanted;
+ err = send_ioctl(ctx, &edata);
+ if (err < 0)
+ fprintf(stderr, "Cannot turn %s the EEE",
+ (eee_wanted ? "on" : "off"));
+ }
+ }
+
if (msglvl_changed) {
struct ethtool_value edata;
@@ -3129,7 +3171,8 @@ static const struct option {
" [ xcvr internal|external ]\n"
" [ wol p|u|m|b|a|g|s|d... ]\n"
" [ sopass %x:%x:%x:%x:%x:%x ]\n"
- " [ msglvl %d | msglvl type on|off ... ]\n" },
+ " [ msglvl %d | msglvl type on|off ]\n"
+ " [ eee on|off ... ]\n" },
{ "-a|--show-pause", 1, do_gpause, "Show pause options" },
{ "-A|--pause", 1, do_spause, "Set pause options",
" [ autoneg on|off ]\n"
This patch adds a new option to enable/disable the Energy Efficient Ethernet support: below some example: bash-3.00# ethtool -s eth0 eee on stmmac: Energy-Efficient Ethernet initialized bash-3.00# ./ethtool eth0 Settings for eth0: Supported ports: [ TP MII ] Supported link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full [snip] Wake-on: d Current message level: 0x0000003f (63) drv probe link timer ifdown ifup Link detected: yes Energy-Efficient Ethernet: Enabled Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> --- ethtool-copy.h | 3 +++ ethtool.c | 45 ++++++++++++++++++++++++++++++++++++++++++++- 2 files changed, 47 insertions(+), 1 deletions(-)