Message ID | 4F4BE62C.1000402@aribaud.net |
---|---|
State | Accepted |
Delegated to: | Wolfgang Denk |
Headers | show |
Dear Albert ARIBAUD, In message <4F4BE62C.1000402@aribaud.net> you wrote: > Hi Wolfgang, > > The following changes since commit 54e96680cb96fb7a4b8f43fd949c62054004d3e5: > > Merge branch 'master' of git://git.denx.de/u-boot-microblaze > (2012-02-26 22:17:40 +0100) > > are available in the git repository at: > > git://git.denx.de/u-boot-arm master > > Aneesh V (1): > armv7: omap3: leave outer cache enabled > > Chase Maupin (1): > am33xx: ddr_defs.h: Change DDR timings > > Daniel Gorsulowski (2): > at91: modified NAND flash timing on meesc board > at91: modified NAND flash timing on otc570 board > > Detlev Zundel (1): > mcx: Enable command line editing > > Eric Nelson (6): > mx6q: define GPIO macros for translating between ordinals and > port:index > mxc_spi: move machine specifics into CPU headers > mx6q: Add support for ECSPI through mxc_spi driver > mx6q: mx6qsabrelite: Add ECSPI support to the Sabrelite platform > mx6q: mx6qsabrelite: Provide default serial flash bus and chip-select > mx6q: mx6qsabrelite: Conditionally define macros for environment > in serial flash > > Fabio Estevam (7): > mx53loco: Use gpio_direction_input prior to gpio_get_value > mx53ard: Use gpio_direction_input prior to gpio_get_value > mx53evk: Use gpio_direction_input prior to gpio_get_value > mx53smd: Use gpio_direction_input prior to gpio_get_value > mx51evk: Use gpio_direction_input prior to gpio_get_value > mx35: generic: Let get_reset_cause be defined only when > CONFIG_DISPLAY_CPUINFO is selected > mx35pdk: Remove duplicate CPU revision and reset cause information > > Hadli, Manjunath (3): > davinci: cleanup davinci_sync_env_enetaddr() fucntion > da850evm: add support to read mac address from SPI flash > da850evm: read mac address from I2C EEPROM on AM18x EVM > > Helmut Raiger (3): > tt01: fix environment size > tt01: add video support > tt01: fix hush parser config, add release config > > Linus Walleij (3): > integrator: stop calling pci_init() twice > integrator: rewrite the AP PCI driver > integrator: update the Integrator/CP config > > Marek Vasut (2): > i.MX28: Fix VDDIO and VDDA setup > MX28: Fix get_timer() / get_tbclk() issue > > Matthias Fuchs (4): > mx28evk: add RTC support > mx28evk: add USB support > mx28evk: add SPI support > mx28: fix SPL code to make USB booting work > > Peter Meerwald (1): > beagle: enable DVI_PUP > > Shawn Guo (1): > common/image.c: align usage of fdt_high with initrd_high > > Stefano Babic (4): > MX35: add missing get_ticks() and get_tbclk() > MX31: add missing get_tbclk() > MX5/MX6: add missing get_ticks() and get_tbclk() > MX27: add missing get_tbclk() > > Thomas Weber (2): > Tricorder: Switch env to generic mmc driver > OMAP3: Remove unused CONFIG_SYS_NAND_ECCSTEPS/TOTAL > > Tom Rini (2): > am335x_evm: Change MAINTAINERS entry > omap3_beagle: Change MAINTAINERS entry > > Troy Kisky (5): > net: fec_mxc: add 1000 Mbps selection > net: fec_mxc: add PHYLIB support > net: phy: add support for Micrel's KSZ9021 > net: phy: make board_phy_config responsible for calling drv->config > i.mx6q: mx6qsabrelite: Update the network configuration > > prabhakar.csengg@gmail.com (1): > dm6467Tevm: Use a common configuration file for davinci_dm6467evm > and davinci_dm6467Tevm > > MAINTAINERS | 10 +- > README | 8 + > arch/arm/cpu/arm1136/mx31/timer.c | 9 + > arch/arm/cpu/arm1136/mx35/generic.c | 2 +- > arch/arm/cpu/arm1136/mx35/timer.c | 103 +++-- > arch/arm/cpu/arm926ejs/davinci/cpu.c | 2 +- > arch/arm/cpu/arm926ejs/davinci/misc.c | 9 +- > arch/arm/cpu/arm926ejs/mx27/timer.c | 5 + > arch/arm/cpu/arm926ejs/mx28/spl_power_init.c | 16 +- > arch/arm/cpu/arm926ejs/mx28/start.S | 21 +- > arch/arm/cpu/arm926ejs/mx28/timer.c | 19 +- > arch/arm/cpu/armv7/imx-common/timer.c | 75 +++- > arch/arm/cpu/armv7/omap3/board.c | 2 +- > arch/arm/include/asm/arch-am33xx/ddr_defs.h | 2 +- > arch/arm/include/asm/arch-mx31/imx-regs.h | 27 ++ > arch/arm/include/asm/arch-mx31/sys_proto.h | 1 + > arch/arm/include/asm/arch-mx35/imx-regs.h | 25 + > arch/arm/include/asm/arch-mx5/imx-regs.h | 30 ++ > arch/arm/include/asm/arch-mx6/imx-regs.h | 49 ++ > board/armltd/integrator/integrator.c | 3 - > board/armltd/integrator/pci.c | 582 > ++++++++++++++----------- > board/armltd/integrator/pci_v3.h | 200 +++++++++ > board/davinci/da8xxevm/da850evm.c | 103 +++++ > board/davinci/dm6467evm/dm6467evm.c | 2 +- > board/esd/meesc/meesc.c | 8 +- > board/esd/otc570/otc570.c | 8 +- > board/freescale/corenet_ds/eth_p4080.c | 2 + > board/freescale/mpc8544ds/mpc8544ds.c | 2 + > board/freescale/mx28evk/iomux.c | 8 + > board/freescale/mx28evk/mx28evk.c | 7 + > board/freescale/mx35pdk/mx35pdk.c | 27 +-- > board/freescale/mx51evk/mx51evk.c | 2 + > board/freescale/mx53ard/mx53ard.c | 2 + > board/freescale/mx53evk/mx53evk.c | 2 + > board/freescale/mx53loco/mx53loco.c | 2 + > board/freescale/mx53smd/mx53smd.c | 1 + > board/freescale/mx6qsabrelite/imximage.cfg | 2 +- > board/freescale/mx6qsabrelite/mx6qsabrelite.c | 68 ++-- > board/hale/tt01/tt01.c | 21 + > board/ti/beagle/beagle.c | 34 ++ > boards.cfg | 8 +- > common/image.c | 12 +- > drivers/net/fec_mxc.c | 165 +++++--- > drivers/net/fec_mxc.h | 7 + > drivers/net/phy/micrel.c | 87 ++++ > drivers/net/phy/phy.c | 5 +- > drivers/spi/mxc_spi.c | 93 +---- > include/configs/davinci_dm6467Tevm.h | 167 ------- > include/configs/davinci_dm6467evm.h | 1 - > include/configs/integratorap.h | 148 +------ > include/configs/integratorcp.h | 47 +-- > include/configs/mcx.h | 7 +- > include/configs/mx28evk.h | 64 +++- > include/configs/mx6qsabrelite.h | 31 ++- > include/configs/omap3_overo.h | 4 - > include/configs/tricorder.h | 12 +- > include/configs/tt01.h | 40 ++- > include/micrel.h | 16 + > include/phy.h | 1 + > 59 files changed, 1495 insertions(+), 921 deletions(-) > create mode 100644 board/armltd/integrator/pci_v3.h > delete mode 100644 include/configs/davinci_dm6467Tevm.h > create mode 100644 include/micrel.h Applied, thanks. Best regards, Wolfgang Denk