diff mbox

[v3,22/25] irq_domain/x86: Convert x86 (embedded) to use common irq_domain

Message ID CACxGe6tQvBZBMynXbknWx1o1s5TPEN7rXrNOOAjC5F_dz9B51w@mail.gmail.com (mailing list archive)
State Not Applicable
Headers show

Commit Message

Grant Likely Feb. 23, 2012, 7:56 p.m. UTC
On Wed, Feb 1, 2012 at 11:06 AM, Grant Likely <grant.likely@secretlab.ca> wrote:
> On Wed, Feb 1, 2012 at 7:17 AM, Sebastian Andrzej Siewior
> <bigeasy@linutronix.de> wrote:
>> * Grant Likely | 2012-01-30 12:58:42 [-0700]:
>>
>>>Ugh.  This isn't easy.  The legacy mapping really needs all the
>>
>> Feel free to merge this patch. I don't have the time to look at this now
>> so I take a look at the ioapic later.
>
> There's no rush here.  I can leave it as-is with IRQ_DOMAIN turned off
> for x86 for now.

Turns out I have to enable IRQ_DOMAIN for x86 because the TI TWL4030
driver needs it.  I do need to apply this patch.  Until something
better can be implemented, can I change ioapic_add_ofnode() so that it
allocates all irq_descs immediately.  It's not ideal, but every other
approach I've looked at results in nasty hacks.

Looking at the ioapic code, it appears to handle preallocated
irq_descs gracefully.

Does adding this loop help (apologies if it is whitespace damaged, I
cut&paste it):

 						   (void*)i);


g.

Comments

Sebastian Andrzej Siewior Feb. 23, 2012, 9:22 p.m. UTC | #1
On 02/23/2012 08:56 PM, Grant Likely wrote:
> On Wed, Feb 1, 2012 at 11:06 AM, Grant Likely<grant.likely@secretlab.ca>  wrote:
>> On Wed, Feb 1, 2012 at 7:17 AM, Sebastian Andrzej Siewior
>> <bigeasy@linutronix.de>  wrote:
>>> * Grant Likely | 2012-01-30 12:58:42 [-0700]:
>>>
>>>> Ugh.  This isn't easy.  The legacy mapping really needs all the
>>>
>>> Feel free to merge this patch. I don't have the time to look at this now
>>> so I take a look at the ioapic later.
>>
>> There's no rush here.  I can leave it as-is with IRQ_DOMAIN turned off
>> for x86 for now.
>
> Turns out I have to enable IRQ_DOMAIN for x86 because the TI TWL4030
> driver needs it.  I do need to apply this patch.  Until something
> better can be implemented, can I change ioapic_add_ofnode() so that it
> allocates all irq_descs immediately.  It's not ideal, but every other
> approach I've looked at results in nasty hacks.
>
> Looking at the ioapic code, it appears to handle preallocated
> irq_descs gracefully.

Please merge your initial patch as-it.

> Does adding this loop help (apologies if it is whitespace damaged, I
> cut&paste it):
>
> diff --git a/arch/x86/kernel/devicetree.c b/arch/x86/kernel/devicetree.c
> index 3ae2ced..89c1310 100644
> --- a/arch/x86/kernel/devicetree.c
> +++ b/arch/x86/kernel/devicetree.c
> @@ -345,7 +345,7 @@ const struct irq_domain_ops ioapic_irq_domain_ops = {
>   static void __init ioapic_add_ofnode(struct device_node *np)
>   {
>   	struct resource r;
> -	int i, ret;
> +	int i, j, ret;
>
>   	ret = of_address_to_resource(np, 0,&r);
>   	if (ret) {
> @@ -361,6 +361,14 @@ static void __init ioapic_add_ofnode(struct
> device_node *np)
>
>   			gsi_cfg = mp_ioapic_gsi_routing(i);
>
> +			/*
> +			 * Preallocate irq_descs so that the legacy mapping
> +			 * works, but don't set them up.
> +			 * io_apic_setup_irq_pin_once() will finish the set up.
> +			 */
> +			for (j = 0; j<  32; j++)

It is not 32. If I remember correctly the first ioapic had 24 pins so
did the second. This is ioapic specifc.


>
> g.

Sebastian
diff mbox

Patch

diff --git a/arch/x86/kernel/devicetree.c b/arch/x86/kernel/devicetree.c
index 3ae2ced..89c1310 100644
--- a/arch/x86/kernel/devicetree.c
+++ b/arch/x86/kernel/devicetree.c
@@ -345,7 +345,7 @@  const struct irq_domain_ops ioapic_irq_domain_ops = {
 static void __init ioapic_add_ofnode(struct device_node *np)
 {
 	struct resource r;
-	int i, ret;
+	int i, j, ret;

 	ret = of_address_to_resource(np, 0, &r);
 	if (ret) {
@@ -361,6 +361,14 @@  static void __init ioapic_add_ofnode(struct
device_node *np)

 			gsi_cfg = mp_ioapic_gsi_routing(i);

+			/*
+			 * Preallocate irq_descs so that the legacy mapping
+			 * works, but don't set them up.
+			 * io_apic_setup_irq_pin_once() will finish the set up.
+			 */
+			for (j = 0; j < 32; j++)
+				irq_alloc_desc_at(gsi_cfg->gsi_base + j,
+						  cpu_to_node(0));
 			id = irq_domain_add_legacy(np, 32, gsi_cfg->gsi_base, 0,
 						   &ioapic_irq_domain_ops,