Patchwork [16/22] arm_boot: Pass base address of GIC CPU interface, not whole GIC

login
register
mail settings
Submitter Peter Maydell
Date Feb. 17, 2012, 11:29 a.m.
Message ID <1329478177-14650-17-git-send-email-peter.maydell@linaro.org>
Download mbox | patch
Permalink /patch/141774/
State New
Headers show

Comments

Peter Maydell - Feb. 17, 2012, 11:29 a.m.
The arm_boot secondary boot loader code needs the address of
the GIC CPU interface. Obtaining this from the base address
of the private peripheral region was possible for A9 and 11MPcore,
but the A15 puts the GIC CPU interface in a different place.
So make boards pass in the GIC CPU interface address directly.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 hw/arm-misc.h       |    2 +-
 hw/arm_boot.c       |    8 ++++----
 hw/exynos4_boards.c |    3 ++-
 hw/realview.c       |   12 +++++++-----
 hw/vexpress.c       |    6 ++++--
 5 files changed, 18 insertions(+), 13 deletions(-)

Patch

diff --git a/hw/arm-misc.h b/hw/arm-misc.h
index 5e5204b..306013a 100644
--- a/hw/arm-misc.h
+++ b/hw/arm-misc.h
@@ -37,7 +37,7 @@  struct arm_boot_info {
      */
     target_phys_addr_t smp_loader_start;
     target_phys_addr_t smp_bootreg_addr;
-    target_phys_addr_t smp_priv_base;
+    target_phys_addr_t gic_cpu_if_addr;
     int nb_cpus;
     int board_id;
     int (*atag_board)(const struct arm_boot_info *info, void *p);
diff --git a/hw/arm_boot.c b/hw/arm_boot.c
index 34a8739..2ef25ca 100644
--- a/hw/arm_boot.c
+++ b/hw/arm_boot.c
@@ -43,16 +43,16 @@  static uint32_t bootloader[] = {
  * location for the kernel secondary CPU entry point.
  */
 static uint32_t smpboot[] = {
-  0xe59f201c, /* ldr r2, privbase */
+  0xe59f201c, /* ldr r2, gic_cpu_if */
   0xe59f001c, /* ldr r0, startaddr */
   0xe3a01001, /* mov r1, #1 */
-  0xe5821100, /* str r1, [r2, #256] */
+  0xe5821000, /* str r1, [r2] */
   0xe320f003, /* wfi */
   0xe5901000, /* ldr     r1, [r0] */
   0xe1110001, /* tst     r1, r1 */
   0x0afffffb, /* beq     <wfi> */
   0xe12fff11, /* bx      r1 */
-  0,          /* privbase: Private memory region base address.  */
+  0,          /* gic_cpu_if: base address of GIC CPU interface */
   0           /* bootreg: Boot register address is held here */
 };
 
@@ -61,7 +61,7 @@  static void default_write_secondary(CPUState *env,
 {
     int n;
     smpboot[ARRAY_SIZE(smpboot) - 1] = info->smp_bootreg_addr;
-    smpboot[ARRAY_SIZE(smpboot) - 2] = info->smp_priv_base;
+    smpboot[ARRAY_SIZE(smpboot) - 2] = info->gic_cpu_if_addr;
     for (n = 0; n < ARRAY_SIZE(smpboot); n++) {
         smpboot[n] = tswap32(smpboot[n]);
     }
diff --git a/hw/exynos4_boards.c b/hw/exynos4_boards.c
index 329efbe..553a02b 100644
--- a/hw/exynos4_boards.c
+++ b/hw/exynos4_boards.c
@@ -112,7 +112,8 @@  static Exynos4210State *exynos4_boards_init_common(
     exynos4_board_binfo.kernel_filename = kernel_filename;
     exynos4_board_binfo.initrd_filename = initrd_filename;
     exynos4_board_binfo.kernel_cmdline = kernel_cmdline;
-    exynos4_board_binfo.smp_priv_base = EXYNOS4210_SMP_PRIVATE_BASE_ADDR;
+    exynos4_board_binfo.gic_cpu_if_addr =
+            EXYNOS4210_SMP_PRIVATE_BASE_ADDR + 0x100;
 
     PRINT_DEBUG("\n ram_size: %luMiB [0x%08lx]\n"
             " kernel_filename: %s\n"
diff --git a/hw/realview.c b/hw/realview.c
index bcf982f..ae1bbcd 100644
--- a/hw/realview.c
+++ b/hw/realview.c
@@ -222,21 +222,23 @@  static void realview_init(ram_addr_t ram_size,
     sysbus_mmio_map(sysbus_from_qdev(sysctl), 0, 0x10000000);
 
     if (is_mpcore) {
+        target_phys_addr_t periphbase;
         dev = qdev_create(NULL, is_pb ? "a9mpcore_priv": "realview_mpcore");
         qdev_prop_set_uint32(dev, "num-cpu", smp_cpus);
         qdev_init_nofail(dev);
         busdev = sysbus_from_qdev(dev);
         if (is_pb) {
-            realview_binfo.smp_priv_base = 0x1f000000;
+            periphbase = 0x1f000000;
         } else {
-            realview_binfo.smp_priv_base = 0x10100000;
+            periphbase = 0x10100000;
         }
-        sysbus_mmio_map(busdev, 0, realview_binfo.smp_priv_base);
+        sysbus_mmio_map(busdev, 0, periphbase);
         for (n = 0; n < smp_cpus; n++) {
             sysbus_connect_irq(busdev, n, cpu_irq[n]);
         }
-        sysbus_create_varargs("l2x0", realview_binfo.smp_priv_base + 0x2000,
-                              NULL);
+        sysbus_create_varargs("l2x0", periphbase + 0x2000, NULL);
+        /* Both A9 and 11MPCore put the GIC CPU i/f at base + 0x100 */
+        realview_binfo.gic_cpu_if_addr = periphbase + 0x100;
     } else {
         uint32_t gic_addr = is_pb ? 0x1e000000 : 0x10040000;
         /* For now just create the nIRQ GIC, and ignore the others.  */
diff --git a/hw/vexpress.c b/hw/vexpress.c
index 43ad206..aae9d81 100644
--- a/hw/vexpress.c
+++ b/hw/vexpress.c
@@ -115,6 +115,7 @@  typedef void DBoardInitFn(const VEDBoardInfo *daughterboard,
 struct VEDBoardInfo {
     const target_phys_addr_t *motherboard_map;
     target_phys_addr_t loader_start;
+    const target_phys_addr_t gic_cpu_if_addr;
     DBoardInitFn *init;
 };
 
@@ -175,8 +176,7 @@  static void a9_daughterboard_init(const VEDBoardInfo *daughterboard,
     qdev_prop_set_uint32(dev, "num-cpu", smp_cpus);
     qdev_init_nofail(dev);
     busdev = sysbus_from_qdev(dev);
-    vexpress_binfo.smp_priv_base = 0x1e000000;
-    sysbus_mmio_map(busdev, 0, vexpress_binfo.smp_priv_base);
+    sysbus_mmio_map(busdev, 0, 0x1e000000);
     for (n = 0; n < smp_cpus; n++) {
         sysbus_connect_irq(busdev, n, cpu_irq[n]);
     }
@@ -214,6 +214,7 @@  static void a9_daughterboard_init(const VEDBoardInfo *daughterboard,
 static const VEDBoardInfo a9_daughterboard = {
     .motherboard_map = motherboard_legacy_map,
     .loader_start = 0x60000000,
+    .gic_cpu_if_addr = 0x1e000100,
     .init = a9_daughterboard_init,
 };
 
@@ -316,6 +317,7 @@  static void vexpress_common_init(const VEDBoardInfo *daughterboard,
     vexpress_binfo.loader_start = daughterboard->loader_start;
     vexpress_binfo.smp_loader_start = map[VE_SRAM];
     vexpress_binfo.smp_bootreg_addr = map[VE_SYSREGS] + 0x30;
+    vexpress_binfo.gic_cpu_if_addr = daughterboard->gic_cpu_if_addr;
     arm_load_kernel(first_cpu, &vexpress_binfo);
 }