Patchwork [U-Boot] Please pull u-boot-ti/master

login
register
mail settings
Submitter Tom Rini
Date Feb. 10, 2012, 10:56 p.m.
Message ID <F56FD322-7E95-4149-B57B-8542C8101C6B@gmail.com>
Download mbox
Permalink /patch/140735/
State Accepted
Delegated to: Albert ARIBAUD
Headers show

Pull-request

git://git.denx.de/u-boot-ti.git master

Comments

Tom Rini - Feb. 10, 2012, 10:56 p.m.
Hello,

The following changes since commit ca849aa4b86b282f837c58a0b129460ebfad2239:
  David Müller (ELSOFT AG) (1):
        ARM: activate DISPLAY_CPUINFO for VCMA9 + SMDK2410 board

are available in the git repository at:

  git://git.denx.de/u-boot-ti.git master

Aneesh V (1):
      OMAP4460: Reduce MPU clock speed from 920 to 700

Christian Riesch (5):
      arm, davinci: Add lowlevel_init for SoCs other than DM644X
      arm, arm926ejs: Do cpu critical inits only for boards that require it
      arm, arm926ejs: Add option CONFIG_SYS_EXCEPTION_VECTORS_HIGH
      arm, arm926ejs: Enable icache only if CONFIG_SYS_ICACHE_OFF is not defined
      arm, davinci: Add support for the Calimain board from OMICRON electronics

Govindraj.R (6):
      usb: ulpi: Extend the existing ulpi framework.
      usb: ulpi: Add omap-ulpi-view port support
      ehci-omap: Clean up added ehci-omap.c
      OMAP3+: Clock: Adding ehci clock enabling
      OMAP4: clock-common: Move the usb dppl configuration to new func
      OMAP4: ehci-omap: enable ehci-omap for panda boards

Hadli, Manjunath (2):
      davinci: remove macro CONFIG_DISPLAY_CPUINFO
      davinci: add support for printing clock frequency

Ilya Yanok (2):
      ehci-omap: driver for EHCI host on OMAP3
      mcx: support for HTKW mcx board

Peter Barada (2):
      omap3logic: Add missing GPMC pinmux for LAN92xx access
      ARMV7: Fix duplicate use of "b" parameter in ACTIM_CTRLA definition

Peter Meerwald (3):
      beagle: fix typos
      omap3: fix comment typos
      doc: fix typos

Schuyler Patton (1):
      AM3517: Changed default clock rate for AM3517

Stefano Babic (2):
      OMAP3: TAM3517: update ehci interface
      ARM: omap3: Added Teejet mt_ventoux

Sughosh Ganu (2):
      arm, arm926ejs: Flush the data cache before disabling it
      Changes to move hawkboard to the new spl infrastructure

 MAINTAINERS                                        |   10 +
 README                                             |    6 +
 arch/arm/cpu/arm926ejs/davinci/cpu.c               |   76 ++--
 arch/arm/cpu/arm926ejs/davinci/da850_lowlevel.c    |   24 +-
 arch/arm/cpu/arm926ejs/davinci/lowlevel_init.S     |    4 +
 arch/arm/cpu/arm926ejs/davinci/spl.c               |    4 +-
 arch/arm/cpu/arm926ejs/start.S                     |   28 +-
 arch/arm/cpu/armv7/omap-common/clocks-common.c     |   54 ++-
 arch/arm/cpu/armv7/omap3/board.c                   |    8 +-
 arch/arm/cpu/armv7/omap3/clock.c                   |   20 +
 arch/arm/cpu/armv7/omap4/clocks.c                  |   27 +-
 arch/arm/include/asm/arch-davinci/da850_lowlevel.h |    9 +
 arch/arm/include/asm/arch-omap3/clocks_omap3.h     |    2 +-
 .../asm/arch-omap3/{ehci_omap3.h => ehci.h}        |   45 +--
 arch/arm/include/asm/arch-omap3/mem.h              |   57 ++--
 arch/arm/include/asm/arch-omap3/sys_proto.h        |    1 +
 arch/arm/include/asm/arch-omap4/ehci.h             |   49 +++
 arch/arm/include/asm/ehci-omap.h                   |  142 +++++++
 arch/arm/include/asm/u-boot.h                      |    3 +
 arch/arm/lib/board.c                               |   10 +-
 board/davinci/da8xxevm/da850evm.c                  |    4 +-
 board/davinci/da8xxevm/hawkboard.c                 |   23 +
 board/davinci/da8xxevm/hawkboard_nand_spl.c        |  115 ------
 .../{u-boot-spl.lds => u-boot-spl-da850evm.lds}    |    0
 .../davinci/da8xxevm/u-boot-spl-hawk.lds           |   22 +-
 board/efikamx/efikamx-usb.c                        |   24 +-
 board/enbw/enbw_cmc/enbw_cmc.c                     |   13 +-
 board/htkw/mcx/Makefile                            |   38 ++
 board/htkw/mcx/mcx.c                               |  112 +++++
 board/htkw/mcx/mcx.h                               |  408 +++++++++++++++++++
 board/logicpd/omap3som/omap3logic.c                |   15 +
 board/omicron/calimain/Makefile                    |   45 ++
 board/omicron/calimain/calimain.c                  |  188 +++++++++
 board/technexion/twister/twister.c                 |   22 +
 board/teejet/mt_ventoux/Makefile                   |   38 ++
 board/teejet/mt_ventoux/mt_ventoux.c               |  233 +++++++++++
 board/teejet/mt_ventoux/mt_ventoux.h               |  429 ++++++++++++++++++++
 board/ti/beagle/beagle.c                           |  109 +-----
 board/ti/beagle/beagle.h                           |    4 +-
 board/ti/panda/panda.c                             |   38 ++
 board/ti/panda/panda_mux_data.h                    |   16 +-
 boards.cfg                                         |    4 +-
 common/cmd_bdinfo.c                                |    9 +
 doc/README.SPL                                     |    4 +-
 doc/README.hawkboard                               |   43 +-
 doc/README.omap-ulpi-viewport                      |   27 ++
 drivers/usb/host/Makefile                          |    1 +
 drivers/usb/host/ehci-omap.c                       |  255 ++++++++++++
 drivers/usb/ulpi/Makefile                          |    1 +
 drivers/usb/ulpi/omap-ulpi-viewport.c              |  105 +++++
 drivers/usb/ulpi/ulpi-viewport.c                   |   32 +-
 drivers/usb/ulpi/ulpi.c                            |   54 ++--
 include/common.h                                   |    1 +
 include/configs/calimain.h                         |  363 +++++++++++++++++
 include/configs/cam_enc_4xx.h                      |   11 +-
 include/configs/da830evm.h                         |    4 +
 include/configs/da850evm.h                         |   11 +-
 include/configs/davinci_dm355evm.h                 |    5 +-
 include/configs/davinci_dm355leopard.h             |    5 +-
 include/configs/davinci_dm365evm.h                 |    4 +
 include/configs/davinci_dm6467Tevm.h               |    5 +-
 include/configs/davinci_dm6467evm.h                |    5 +-
 include/configs/davinci_dvevm.h                    |    6 +-
 include/configs/davinci_schmoogie.h                |    5 +-
 include/configs/davinci_sffsdr.h                   |    5 +-
 include/configs/davinci_sonata.h                   |    5 +-
 include/configs/ea20.h                             |    4 +
 include/configs/enbw_cmc.h                         |   11 +-
 include/configs/hawkboard.h                        |   28 ++-
 include/configs/mcx.h                              |  378 +++++++++++++++++
 include/configs/mt_ventoux.h                       |   58 +++
 include/configs/omap3_beagle.h                     |    8 +
 include/configs/omap4_panda.h                      |   26 ++-
 include/configs/tam3517-common.h                   |    6 +-
 include/usb/ulpi.h                                 |   36 ++-
 nand_spl/board/davinci/da8xxevm/Makefile           |  155 -------
 76 files changed, 3496 insertions(+), 659 deletions(-)
 rename arch/arm/include/asm/arch-omap3/{ehci_omap3.h => ehci.h} (51%)
 create mode 100644 arch/arm/include/asm/arch-omap4/ehci.h
 create mode 100644 arch/arm/include/asm/ehci-omap.h
 delete mode 100644 board/davinci/da8xxevm/hawkboard_nand_spl.c
 rename board/davinci/da8xxevm/{u-boot-spl.lds => u-boot-spl-da850evm.lds} (100%)
 rename nand_spl/board/davinci/da8xxevm/u-boot.lds => board/davinci/da8xxevm/u-boot-spl-hawk.lds (86%)
 create mode 100644 board/htkw/mcx/Makefile
 create mode 100644 board/htkw/mcx/mcx.c
 create mode 100644 board/htkw/mcx/mcx.h
 create mode 100644 board/omicron/calimain/Makefile
 create mode 100644 board/omicron/calimain/calimain.c
 create mode 100644 board/teejet/mt_ventoux/Makefile
 create mode 100644 board/teejet/mt_ventoux/mt_ventoux.c
 create mode 100644 board/teejet/mt_ventoux/mt_ventoux.h
 create mode 100644 doc/README.omap-ulpi-viewport
 create mode 100644 drivers/usb/host/ehci-omap.c
 create mode 100644 drivers/usb/ulpi/omap-ulpi-viewport.c
 create mode 100644 include/configs/calimain.h
 create mode 100644 include/configs/mcx.h
 create mode 100644 include/configs/mt_ventoux.h
 delete mode 100644 nand_spl/board/davinci/da8xxevm/Makefile

I've tested the USB changes on Beagleboard xM and Pandaboard ES.
Albert ARIBAUD - Feb. 12, 2012, 9:10 a.m.
Hi Tom,

Le 10/02/2012 23:56, Tom Rini a écrit :
> Hello,
>
> The following changes since commit ca849aa4b86b282f837c58a0b129460ebfad2239:
>    David Müller (ELSOFT AG) (1):
>          ARM: activate DISPLAY_CPUINFO for VCMA9 + SMDK2410 board
>
> are available in the git repository at:
>
>    git://git.denx.de/u-boot-ti.git master
>
> Aneesh V (1):
>        OMAP4460: Reduce MPU clock speed from 920 to 700
>
> Christian Riesch (5):
>        arm, davinci: Add lowlevel_init for SoCs other than DM644X
>        arm, arm926ejs: Do cpu critical inits only for boards that require it
>        arm, arm926ejs: Add option CONFIG_SYS_EXCEPTION_VECTORS_HIGH
>        arm, arm926ejs: Enable icache only if CONFIG_SYS_ICACHE_OFF is not defined
>        arm, davinci: Add support for the Calimain board from OMICRON electronics
>
> Govindraj.R (6):
>        usb: ulpi: Extend the existing ulpi framework.
>        usb: ulpi: Add omap-ulpi-view port support
>        ehci-omap: Clean up added ehci-omap.c
>        OMAP3+: Clock: Adding ehci clock enabling
>        OMAP4: clock-common: Move the usb dppl configuration to new func
>        OMAP4: ehci-omap: enable ehci-omap for panda boards
>
> Hadli, Manjunath (2):
>        davinci: remove macro CONFIG_DISPLAY_CPUINFO
>        davinci: add support for printing clock frequency
>
> Ilya Yanok (2):
>        ehci-omap: driver for EHCI host on OMAP3
>        mcx: support for HTKW mcx board
>
> Peter Barada (2):
>        omap3logic: Add missing GPMC pinmux for LAN92xx access
>        ARMV7: Fix duplicate use of "b" parameter in ACTIM_CTRLA definition
>
> Peter Meerwald (3):
>        beagle: fix typos
>        omap3: fix comment typos
>        doc: fix typos
>
> Schuyler Patton (1):
>        AM3517: Changed default clock rate for AM3517
>
> Stefano Babic (2):
>        OMAP3: TAM3517: update ehci interface
>        ARM: omap3: Added Teejet mt_ventoux
>
> Sughosh Ganu (2):
>        arm, arm926ejs: Flush the data cache before disabling it
>        Changes to move hawkboard to the new spl infrastructure
>
>   MAINTAINERS                                        |   10 +
>   README                                             |    6 +
>   arch/arm/cpu/arm926ejs/davinci/cpu.c               |   76 ++--
>   arch/arm/cpu/arm926ejs/davinci/da850_lowlevel.c    |   24 +-
>   arch/arm/cpu/arm926ejs/davinci/lowlevel_init.S     |    4 +
>   arch/arm/cpu/arm926ejs/davinci/spl.c               |    4 +-
>   arch/arm/cpu/arm926ejs/start.S                     |   28 +-
>   arch/arm/cpu/armv7/omap-common/clocks-common.c     |   54 ++-
>   arch/arm/cpu/armv7/omap3/board.c                   |    8 +-
>   arch/arm/cpu/armv7/omap3/clock.c                   |   20 +
>   arch/arm/cpu/armv7/omap4/clocks.c                  |   27 +-
>   arch/arm/include/asm/arch-davinci/da850_lowlevel.h |    9 +
>   arch/arm/include/asm/arch-omap3/clocks_omap3.h     |    2 +-
>   .../asm/arch-omap3/{ehci_omap3.h =>  ehci.h}        |   45 +--
>   arch/arm/include/asm/arch-omap3/mem.h              |   57 ++--
>   arch/arm/include/asm/arch-omap3/sys_proto.h        |    1 +
>   arch/arm/include/asm/arch-omap4/ehci.h             |   49 +++
>   arch/arm/include/asm/ehci-omap.h                   |  142 +++++++
>   arch/arm/include/asm/u-boot.h                      |    3 +
>   arch/arm/lib/board.c                               |   10 +-
>   board/davinci/da8xxevm/da850evm.c                  |    4 +-
>   board/davinci/da8xxevm/hawkboard.c                 |   23 +
>   board/davinci/da8xxevm/hawkboard_nand_spl.c        |  115 ------
>   .../{u-boot-spl.lds =>  u-boot-spl-da850evm.lds}    |    0
>   .../davinci/da8xxevm/u-boot-spl-hawk.lds           |   22 +-
>   board/efikamx/efikamx-usb.c                        |   24 +-
>   board/enbw/enbw_cmc/enbw_cmc.c                     |   13 +-
>   board/htkw/mcx/Makefile                            |   38 ++
>   board/htkw/mcx/mcx.c                               |  112 +++++
>   board/htkw/mcx/mcx.h                               |  408 +++++++++++++++++++
>   board/logicpd/omap3som/omap3logic.c                |   15 +
>   board/omicron/calimain/Makefile                    |   45 ++
>   board/omicron/calimain/calimain.c                  |  188 +++++++++
>   board/technexion/twister/twister.c                 |   22 +
>   board/teejet/mt_ventoux/Makefile                   |   38 ++
>   board/teejet/mt_ventoux/mt_ventoux.c               |  233 +++++++++++
>   board/teejet/mt_ventoux/mt_ventoux.h               |  429 ++++++++++++++++++++
>   board/ti/beagle/beagle.c                           |  109 +-----
>   board/ti/beagle/beagle.h                           |    4 +-
>   board/ti/panda/panda.c                             |   38 ++
>   board/ti/panda/panda_mux_data.h                    |   16 +-
>   boards.cfg                                         |    4 +-
>   common/cmd_bdinfo.c                                |    9 +
>   doc/README.SPL                                     |    4 +-
>   doc/README.hawkboard                               |   43 +-
>   doc/README.omap-ulpi-viewport                      |   27 ++
>   drivers/usb/host/Makefile                          |    1 +
>   drivers/usb/host/ehci-omap.c                       |  255 ++++++++++++
>   drivers/usb/ulpi/Makefile                          |    1 +
>   drivers/usb/ulpi/omap-ulpi-viewport.c              |  105 +++++
>   drivers/usb/ulpi/ulpi-viewport.c                   |   32 +-
>   drivers/usb/ulpi/ulpi.c                            |   54 ++--
>   include/common.h                                   |    1 +
>   include/configs/calimain.h                         |  363 +++++++++++++++++
>   include/configs/cam_enc_4xx.h                      |   11 +-
>   include/configs/da830evm.h                         |    4 +
>   include/configs/da850evm.h                         |   11 +-
>   include/configs/davinci_dm355evm.h                 |    5 +-
>   include/configs/davinci_dm355leopard.h             |    5 +-
>   include/configs/davinci_dm365evm.h                 |    4 +
>   include/configs/davinci_dm6467Tevm.h               |    5 +-
>   include/configs/davinci_dm6467evm.h                |    5 +-
>   include/configs/davinci_dvevm.h                    |    6 +-
>   include/configs/davinci_schmoogie.h                |    5 +-
>   include/configs/davinci_sffsdr.h                   |    5 +-
>   include/configs/davinci_sonata.h                   |    5 +-
>   include/configs/ea20.h                             |    4 +
>   include/configs/enbw_cmc.h                         |   11 +-
>   include/configs/hawkboard.h                        |   28 ++-
>   include/configs/mcx.h                              |  378 +++++++++++++++++
>   include/configs/mt_ventoux.h                       |   58 +++
>   include/configs/omap3_beagle.h                     |    8 +
>   include/configs/omap4_panda.h                      |   26 ++-
>   include/configs/tam3517-common.h                   |    6 +-
>   include/usb/ulpi.h                                 |   36 ++-
>   nand_spl/board/davinci/da8xxevm/Makefile           |  155 -------
>   76 files changed, 3496 insertions(+), 659 deletions(-)
>   rename arch/arm/include/asm/arch-omap3/{ehci_omap3.h =>  ehci.h} (51%)
>   create mode 100644 arch/arm/include/asm/arch-omap4/ehci.h
>   create mode 100644 arch/arm/include/asm/ehci-omap.h
>   delete mode 100644 board/davinci/da8xxevm/hawkboard_nand_spl.c
>   rename board/davinci/da8xxevm/{u-boot-spl.lds =>  u-boot-spl-da850evm.lds} (100%)
>   rename nand_spl/board/davinci/da8xxevm/u-boot.lds =>  board/davinci/da8xxevm/u-boot-spl-hawk.lds (86%)
>   create mode 100644 board/htkw/mcx/Makefile
>   create mode 100644 board/htkw/mcx/mcx.c
>   create mode 100644 board/htkw/mcx/mcx.h
>   create mode 100644 board/omicron/calimain/Makefile
>   create mode 100644 board/omicron/calimain/calimain.c
>   create mode 100644 board/teejet/mt_ventoux/Makefile
>   create mode 100644 board/teejet/mt_ventoux/mt_ventoux.c
>   create mode 100644 board/teejet/mt_ventoux/mt_ventoux.h
>   create mode 100644 doc/README.omap-ulpi-viewport
>   create mode 100644 drivers/usb/host/ehci-omap.c
>   create mode 100644 drivers/usb/ulpi/omap-ulpi-viewport.c
>   create mode 100644 include/configs/calimain.h
>   create mode 100644 include/configs/mcx.h
>   create mode 100644 include/configs/mt_ventoux.h
>   delete mode 100644 nand_spl/board/davinci/da8xxevm/Makefile
>
> I've tested the USB changes on Beagleboard xM and Pandaboard ES.

Applied to u-boot-arm/master, thanks!

Amicalement,