[4/8] mtd: doc2001plus: initialize writebufsize

Message ID ac4cc3b2741b1871801c74d2a268c96ae88c846d.1328257053.git.artem.bityutskiy@linux.intel.com
State Accepted
Commit 71f60fbebf0f18dd4e855335a009efda251b1697
Headers show

Commit Message

Artem Bityutskiy Feb. 3, 2012, 8:43 a.m.
From: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>

The writebufsize concept was introduce by commit
"0e4ca7e mtd: add writebufsize field to mtd_info struct" and it represents
the maximum amount of data the device writes to the media at a time. This is
an important parameter for UBIFS which is used during recovery and which
basically defines how big a corruption caused by a power cut can be.

Set it to be equivalent to mtd->writesize because this is the maximum amount
of data the driver writes at a time.

Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Cc: stable@kernel.org [2.6.38+]
 drivers/mtd/devices/doc2001plus.c |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)


diff --git a/drivers/mtd/devices/doc2001plus.c b/drivers/mtd/devices/doc2001plus.c
index 409fa31..c9fbadd 100644
--- a/drivers/mtd/devices/doc2001plus.c
+++ b/drivers/mtd/devices/doc2001plus.c
@@ -467,7 +467,7 @@  void DoCMilPlus_init(struct mtd_info *mtd)
 	mtd->type = MTD_NANDFLASH;
 	mtd->flags = MTD_CAP_NANDFLASH;
-	mtd->writesize = 512;
+	mtd->writebufsize = mtd->writesize = 512;
 	mtd->oobsize = 16;
 	mtd->owner = THIS_MODULE;
 	mtd->_erase = doc_erase;