Patchwork [v11,5/9] ARM: exynos4210: basic Power Management Unit implementation

login
register
mail settings
Submitter Evgeny Voevodin
Date Jan. 30, 2012, 7:38 a.m.
Message ID <1327909117-4542-6-git-send-email-e.voevodin@samsung.com>
Download mbox | patch
Permalink /patch/138526/
State New
Headers show

Comments

Evgeny Voevodin - Jan. 30, 2012, 7:38 a.m.
From: Maksim Kozlov <m.kozlov@samsung.com>

Patch adds basic model for Exynos4210 SoC PMU.
This model implements PMU registers just as a bulk of memory. Currently,
the only reason this device exists is that secondary CPU boot loader
uses PMU INFORM5 register as a holding pen.

Signed-off-by: Maksim Kozlov <m.kozlov@samsung.com>
Signed-off-by: Evgeny Voevodin <e.voevodin@samsung.com>
---
 Makefile.target     |    1 +
 hw/exynos4210.c     |    9 +
 hw/exynos4210_pmu.c |  497 +++++++++++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 507 insertions(+), 0 deletions(-)
 create mode 100644 hw/exynos4210_pmu.c
Peter Maydell - Feb. 1, 2012, 4:21 p.m.
On 30 January 2012 07:38, Evgeny Voevodin <e.voevodin@samsung.com> wrote:
> From: Maksim Kozlov <m.kozlov@samsung.com>
>
> Patch adds basic model for Exynos4210 SoC PMU.
> This model implements PMU registers just as a bulk of memory. Currently,
> the only reason this device exists is that secondary CPU boot loader
> uses PMU INFORM5 register as a holding pen.

Your cover letter's changelog says
 - hw/exynos4210_pmu.c: we do not waste space for non-existing registers
   in PMU state anymore; non-existing registers are now RAZ/WI;

...wrong version of this patch, or is the cover letter wrong?

-- PMM
Mitsyanko Igor - Feb. 2, 2012, 6:06 a.m.
On 02/01/2012 08:21 PM, Peter Maydell wrote:
> On 30 January 2012 07:38, Evgeny Voevodin<e.voevodin@samsung.com>  wrote:
>> From: Maksim Kozlov<m.kozlov@samsung.com>
>>
>> Patch adds basic model for Exynos4210 SoC PMU.
>> This model implements PMU registers just as a bulk of memory. Currently,
>> the only reason this device exists is that secondary CPU boot loader
>> uses PMU INFORM5 register as a holding pen.
>
> Your cover letter's changelog says
>   - hw/exynos4210_pmu.c: we do not waste space for non-existing registers
>     in PMU state anymore; non-existing registers are now RAZ/WI;
>
> ...wrong version of this patch, or is the cover letter wrong?
>
> -- PMM
>
>

Cover letter is not wrong, when we send PMU patch for the first time (in 
V9 series), PMU memory was modelled as continious array of registers 
0x3d0c bytes long, with every register being "read as written". This was 
wrong since PMU address space consists of only a handful of registers 
with big empty gaps between them. Starting from V10, PMU state includes 
only actually existing registers, and empty gaps between these registers 
behave as RAZ/WI.

Patch

diff --git a/Makefile.target b/Makefile.target
index 5f0726d..5803072 100644
--- a/Makefile.target
+++ b/Makefile.target
@@ -340,6 +340,7 @@  obj-arm-y += versatile_pci.o
 obj-arm-y += realview_gic.o realview.o arm_sysctl.o arm11mpcore.o a9mpcore.o
 obj-arm-y += exynos4210_gic.o exynos4210_combiner.o exynos4210.o
 obj-arm-y += exynos4_boards.o exynos4210_uart.o exynos4210_pwm.o
+obj-arm-y += exynos4210_pmu.o
 obj-arm-y += arm_l2x0.o
 obj-arm-y += arm_mptimer.o
 obj-arm-y += armv7m.o armv7m_nvic.o stellaris.o pl022.o stellaris_enet.o
diff --git a/hw/exynos4210.c b/hw/exynos4210.c
index ea5a1f8..2e2dbf0 100644
--- a/hw/exynos4210.c
+++ b/hw/exynos4210.c
@@ -52,6 +52,9 @@ 
 #define EXYNOS4210_EXT_COMBINER_BASE_ADDR   0x10440000
 #define EXYNOS4210_INT_COMBINER_BASE_ADDR   0x10448000
 
+/* PMU SFR base address */
+#define EXYNOS4210_PMU_BASE_ADDR            0x10020000
+
 static uint8_t chipid_and_omr[] = { 0x11, 0x02, 0x21, 0x43,
                                     0x09, 0x00, 0x00, 0x00 };
 
@@ -204,6 +207,12 @@  Exynos4210State *exynos4210_init(MemoryRegion *system_mem,
     memory_region_add_subregion(system_mem, EXYNOS4210_DRAM0_BASE_ADDR,
             &s->dram0_mem);
 
+   /* PMU.
+    * The only reason of existence at the moment is that secondary CPU boot
+    * loader uses PMU INFORM5 register as a holding pen.
+    */
+    sysbus_create_simple("exynos4210.pmu", EXYNOS4210_PMU_BASE_ADDR, NULL);
+
     /* PWM */
     sysbus_create_varargs("exynos4210.pwm", EXYNOS4210_PWM_BASE_ADDR,
             irq_table[exynos4210_get_irq(22, 0)],
diff --git a/hw/exynos4210_pmu.c b/hw/exynos4210_pmu.c
new file mode 100644
index 0000000..8262685
--- /dev/null
+++ b/hw/exynos4210_pmu.c
@@ -0,0 +1,497 @@ 
+/*
+ *  Exynos4210 Power Management Unit (PMU) Emulation
+ *
+ *  Copyright (C) 2011 Samsung Electronics Co Ltd.
+ *    Maksim Kozlov <m.kozlov@samsung.com>
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License as published by the
+ *  Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful, but WITHOUT
+ *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ *  FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ *  for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, see <http://www.gnu.org/licenses/>.
+ */
+
+/*
+ * This model implements PMU registers just as a bulk of memory. Currently,
+ * the only reason this device exists is that secondary CPU boot loader
+ * uses PMU INFORM5 register as a holding pen.
+ */
+
+#include "sysbus.h"
+
+#ifndef DEBUG_PMU
+#define DEBUG_PMU           0
+#endif
+
+#ifndef DEBUG_PMU_EXTEND
+#define DEBUG_PMU_EXTEND    0
+#endif
+
+#if DEBUG_PMU
+#define  PRINT_DEBUG(fmt, args...)  \
+        do { \
+            fprintf(stderr, "  [%s:%d]   "fmt, __func__, __LINE__, ##args); \
+        } while (0)
+
+#if DEBUG_PMU_EXTEND
+#define  PRINT_DEBUG_EXTEND(fmt, args...) \
+        do { \
+            fprintf(stderr, "  [%s:%d]   "fmt, __func__, __LINE__, ##args); \
+        } while (0)
+#else
+#define  PRINT_DEBUG_EXTEND(fmt, args...)  do {} while (0)
+#endif /* EXTEND */
+
+#else
+#define  PRINT_DEBUG(fmt, args...)   do {} while (0)
+#define  PRINT_DEBUG_EXTEND(fmt, args...)  do {} while (0)
+#endif
+
+/*
+ *  Offsets for PMU registers
+ */
+#define OM_STAT                  0x0000 /* OM status register */
+#define RTC_CLKO_SEL             0x000C /* Controls RTCCLKOUT */
+#define GNSS_RTC_OUT_CTRL        0x0010 /* Controls GNSS_RTC_OUT */
+/* Decides whether system-level low-power mode is used. */
+#define SYSTEM_POWER_DOWN_CTRL   0x0200
+/* Sets control options for CENTRAL_SEQ */
+#define SYSTEM_POWER_DOWN_OPTION 0x0208
+#define SWRESET                  0x0400 /* Generate software reset */
+#define RST_STAT                 0x0404 /* Reset status register */
+#define WAKEUP_STAT              0x0600 /* Wakeup status register  */
+#define EINT_WAKEUP_MASK         0x0604 /* Configure External INTerrupt mask */
+#define WAKEUP_MASK              0x0608 /* Configure wakeup source mask */
+#define HDMI_PHY_CONTROL         0x0700 /* HDMI PHY control register */
+#define USBDEVICE_PHY_CONTROL    0x0704 /* USB Device PHY control register */
+#define USBHOST_PHY_CONTROL      0x0708 /* USB HOST PHY control register */
+#define DAC_PHY_CONTROL          0x070C /* DAC control register  */
+#define MIPI_PHY0_CONTROL        0x0710 /* MIPI PHY control register */
+#define MIPI_PHY1_CONTROL        0x0714 /* MIPI PHY control register */
+#define ADC_PHY_CONTROL          0x0718 /* TS-ADC control register */
+#define PCIe_PHY_CONTROL         0x071C /* TS-PCIe control register */
+#define SATA_PHY_CONTROL         0x0720 /* TS-SATA control register */
+#define INFORM0                  0x0800 /* Information register 0  */
+#define INFORM1                  0x0804 /* Information register 1  */
+#define INFORM2                  0x0808 /* Information register 2  */
+#define INFORM3                  0x080C /* Information register 3  */
+#define INFORM4                  0x0810 /* Information register 4  */
+#define INFORM5                  0x0814 /* Information register 5  */
+#define INFORM6                  0x0818 /* Information register 6  */
+#define INFORM7                  0x081C /* Information register 7  */
+#define PMU_DEBUG                0x0A00 /* PMU debug register */
+/* Registers to set system-level low-power option */
+#define ARM_CORE0_SYS_PWR_REG              0x1000
+#define ARM_CORE1_SYS_PWR_REG              0x1010
+#define ARM_COMMON_SYS_PWR_REG             0x1080
+#define ARM_CPU_L2_0_SYS_PWR_REG           0x10C0
+#define ARM_CPU_L2_1_SYS_PWR_REG           0x10C4
+#define CMU_ACLKSTOP_SYS_PWR_REG           0x1100
+#define CMU_SCLKSTOP_SYS_PWR_REG           0x1104
+#define CMU_RESET_SYS_PWR_REG              0x110C
+#define APLL_SYSCLK_SYS_PWR_REG            0x1120
+#define MPLL_SYSCLK_SYS_PWR_REG            0x1124
+#define VPLL_SYSCLK_SYS_PWR_REG            0x1128
+#define EPLL_SYSCLK_SYS_PWR_REG            0x112C
+#define CMU_CLKSTOP_GPS_ALIVE_SYS_PWR_REG  0x1138
+#define CMU_RESET_GPS_ALIVE_SYS_PWR_REG    0x113C
+#define CMU_CLKSTOP_CAM_SYS_PWR_REG        0x1140
+#define CMU_CLKSTOP_TV_SYS_PWR_REG         0x1144
+#define CMU_CLKSTOP_MFC_SYS_PWR_REG        0x1148
+#define CMU_CLKSTOP_G3D_SYS_PWR_REG        0x114C
+#define CMU_CLKSTOP_LCD0_SYS_PWR_REG       0x1150
+#define CMU_CLKSTOP_LCD1_SYS_PWR_REG       0x1154
+#define CMU_CLKSTOP_MAUDIO_SYS_PWR_REG     0x1158
+#define CMU_CLKSTOP_GPS_SYS_PWR_REG        0x115C
+#define CMU_RESET_CAM_SYS_PWR_REG          0x1160
+#define CMU_RESET_TV_SYS_PWR_REG           0x1164
+#define CMU_RESET_MFC_SYS_PWR_REG          0x1168
+#define CMU_RESET_G3D_SYS_PWR_REG          0x116C
+#define CMU_RESET_LCD0_SYS_PWR_REG         0x1170
+#define CMU_RESET_LCD1_SYS_PWR_REG         0x1174
+#define CMU_RESET_MAUDIO_SYS_PWR_REG       0x1178
+#define CMU_RESET_GPS_SYS_PWR_REG          0x117C
+#define TOP_BUS_SYS_PWR_REG                0x1180
+#define TOP_RETENTION_SYS_PWR_REG          0x1184
+#define TOP_PWR_SYS_PWR_REG                0x1188
+#define LOGIC_RESET_SYS_PWR_REG            0x11A0
+#define OneNANDXL_MEM_SYS_PWR_REG          0x11C0
+#define MODEMIF_MEM_SYS_PWR_REG            0x11C4
+#define USBDEVICE_MEM_SYS_PWR_REG          0x11CC
+#define SDMMC_MEM_SYS_PWR_REG              0x11D0
+#define CSSYS_MEM_SYS_PWR_REG              0x11D4
+#define SECSS_MEM_SYS_PWR_REG              0x11D8
+#define PCIe_MEM_SYS_PWR_REG               0x11E0
+#define SATA_MEM_SYS_PWR_REG               0x11E4
+#define PAD_RETENTION_DRAM_SYS_PWR_REG     0x1200
+#define PAD_RETENTION_MAUDIO_SYS_PWR_REG   0x1204
+#define PAD_RETENTION_GPIO_SYS_PWR_REG     0x1220
+#define PAD_RETENTION_UART_SYS_PWR_REG     0x1224
+#define PAD_RETENTION_MMCA_SYS_PWR_REG     0x1228
+#define PAD_RETENTION_MMCB_SYS_PWR_REG     0x122C
+#define PAD_RETENTION_EBIA_SYS_PWR_REG     0x1230
+#define PAD_RETENTION_EBIB_SYS_PWR_REG     0x1234
+#define PAD_ISOLATION_SYS_PWR_REG          0x1240
+#define PAD_ALV_SEL_SYS_PWR_REG            0x1260
+#define XUSBXTI_SYS_PWR_REG                0x1280
+#define XXTI_SYS_PWR_REG                   0x1284
+#define EXT_REGULATOR_SYS_PWR_REG          0x12C0
+#define GPIO_MODE_SYS_PWR_REG              0x1300
+#define GPIO_MODE_MAUDIO_SYS_PWR_REG       0x1340
+#define CAM_SYS_PWR_REG                    0x1380
+#define TV_SYS_PWR_REG                     0x1384
+#define MFC_SYS_PWR_REG                    0x1388
+#define G3D_SYS_PWR_REG                    0x138C
+#define LCD0_SYS_PWR_REG                   0x1390
+#define LCD1_SYS_PWR_REG                   0x1394
+#define MAUDIO_SYS_PWR_REG                 0x1398
+#define GPS_SYS_PWR_REG                    0x139C
+#define GPS_ALIVE_SYS_PWR_REG              0x13A0
+#define ARM_CORE0_CONFIGURATION 0x2000 /* Configure power mode of ARM_CORE0 */
+#define ARM_CORE0_STATUS        0x2004 /* Check power mode of ARM_CORE0 */
+#define ARM_CORE0_OPTION        0x2008 /* Sets control options for ARM_CORE0 */
+#define ARM_CORE1_CONFIGURATION 0x2080 /* Configure power mode of ARM_CORE1 */
+#define ARM_CORE1_STATUS        0x2084 /* Check power mode of ARM_CORE1 */
+#define ARM_CORE1_OPTION        0x2088 /* Sets control options for ARM_CORE0 */
+#define ARM_COMMON_OPTION       0x2408 /* Sets control options for ARM_COMMON */
+/* Configure power mode of ARM_CPU_L2_0 */
+#define ARM_CPU_L2_0_CONFIGURATION 0x2600
+#define ARM_CPU_L2_0_STATUS        0x2604 /* Check power mode of ARM_CPU_L2_0 */
+/* Configure power mode of ARM_CPU_L2_1 */
+#define ARM_CPU_L2_1_CONFIGURATION 0x2620
+#define ARM_CPU_L2_1_STATUS        0x2624 /* Check power mode of ARM_CPU_L2_1 */
+/* Sets control options for PAD_RETENTION_MAUDIO */
+#define PAD_RETENTION_MAUDIO_OPTION 0x3028
+/* Sets control options for PAD_RETENTION_GPIO */
+#define PAD_RETENTION_GPIO_OPTION   0x3108
+/* Sets control options for PAD_RETENTION_UART */
+#define PAD_RETENTION_UART_OPTION   0x3128
+/* Sets control options for PAD_RETENTION_MMCA */
+#define PAD_RETENTION_MMCA_OPTION   0x3148
+/* Sets control options for PAD_RETENTION_MMCB */
+#define PAD_RETENTION_MMCB_OPTION   0x3168
+/* Sets control options for PAD_RETENTION_EBIA */
+#define PAD_RETENTION_EBIA_OPTION   0x3188
+/* Sets control options for PAD_RETENTION_EBIB */
+#define PAD_RETENTION_EBIB_OPTION   0x31A8
+#define PS_HOLD_CONTROL         0x330C /* PS_HOLD control register */
+#define XUSBXTI_CONFIGURATION   0x3400 /* Configure the pad of XUSBXTI */
+#define XUSBXTI_STATUS          0x3404 /* Check the pad of XUSBXTI */
+/* Sets time required for XUSBXTI to be stabilized */
+#define XUSBXTI_DURATION        0x341C
+#define XXTI_CONFIGURATION      0x3420 /* Configure the pad of XXTI */
+#define XXTI_STATUS             0x3424 /* Check the pad of XXTI */
+/* Sets time required for XXTI to be stabilized */
+#define XXTI_DURATION           0x343C
+/* Sets time required for EXT_REGULATOR to be stabilized */
+#define EXT_REGULATOR_DURATION  0x361C
+#define CAM_CONFIGURATION       0x3C00 /* Configure power mode of CAM */
+#define CAM_STATUS              0x3C04 /* Check power mode of CAM */
+#define CAM_OPTION              0x3C08 /* Sets control options for CAM */
+#define TV_CONFIGURATION        0x3C20 /* Configure power mode of TV */
+#define TV_STATUS               0x3C24 /* Check power mode of TV */
+#define TV_OPTION               0x3C28 /* Sets control options for TV */
+#define MFC_CONFIGURATION       0x3C40 /* Configure power mode of MFC */
+#define MFC_STATUS              0x3C44 /* Check power mode of MFC */
+#define MFC_OPTION              0x3C48 /* Sets control options for MFC */
+#define G3D_CONFIGURATION       0x3C60 /* Configure power mode of G3D */
+#define G3D_STATUS              0x3C64 /* Check power mode of G3D */
+#define G3D_OPTION              0x3C68 /* Sets control options for G3D */
+#define LCD0_CONFIGURATION      0x3C80 /* Configure power mode of LCD0 */
+#define LCD0_STATUS             0x3C84 /* Check power mode of LCD0 */
+#define LCD0_OPTION             0x3C88 /* Sets control options for LCD0 */
+#define LCD1_CONFIGURATION      0x3CA0 /* Configure power mode of LCD1 */
+#define LCD1_STATUS             0x3CA4 /* Check power mode of LCD1 */
+#define LCD1_OPTION             0x3CA8 /* Sets control options for LCD1 */
+#define GPS_CONFIGURATION       0x3CE0 /* Configure power mode of GPS */
+#define GPS_STATUS              0x3CE4 /* Check power mode of GPS */
+#define GPS_OPTION              0x3CE8 /* Sets control options for GPS */
+#define GPS_ALIVE_CONFIGURATION 0x3D00 /* Configure power mode of GPS */
+#define GPS_ALIVE_STATUS        0x3D04 /* Check power mode of GPS */
+#define GPS_ALIVE_OPTION        0x3D08 /* Sets control options for GPS */
+
+#define EXYNOS4210_PMU_REGS_MEM_SIZE 0x3d0c
+
+typedef struct Exynos4210PmuReg {
+    const char  *name; /* for debug only */
+    uint32_t     offset;
+    uint32_t     reset_value;
+} Exynos4210PmuReg;
+
+static const Exynos4210PmuReg exynos4210_pmu_regs[] = {
+    {"OM_STAT", OM_STAT, 0x00000000},
+    {"RTC_CLKO_SEL", RTC_CLKO_SEL, 0x00000000},
+    {"GNSS_RTC_OUT_CTRL", GNSS_RTC_OUT_CTRL, 0x00000001},
+    {"SYSTEM_POWER_DOWN_CTRL", SYSTEM_POWER_DOWN_CTRL, 0x00010000},
+    {"SYSTEM_POWER_DOWN_OPTION", SYSTEM_POWER_DOWN_OPTION, 0x03030000},
+    {"SWRESET", SWRESET, 0x00000000},
+    {"RST_STAT", RST_STAT, 0x00000000},
+    {"WAKEUP_STAT", WAKEUP_STAT, 0x00000000},
+    {"EINT_WAKEUP_MASK", EINT_WAKEUP_MASK, 0x00000000},
+    {"WAKEUP_MASK", WAKEUP_MASK, 0x00000000},
+    {"HDMI_PHY_CONTROL", HDMI_PHY_CONTROL, 0x00960000},
+    {"USBDEVICE_PHY_CONTROL", USBDEVICE_PHY_CONTROL, 0x00000000},
+    {"USBHOST_PHY_CONTROL", USBHOST_PHY_CONTROL, 0x00000000},
+    {"DAC_PHY_CONTROL", DAC_PHY_CONTROL, 0x00000000},
+    {"MIPI_PHY0_CONTROL", MIPI_PHY0_CONTROL, 0x00000000},
+    {"MIPI_PHY1_CONTROL", MIPI_PHY1_CONTROL, 0x00000000},
+    {"ADC_PHY_CONTROL", ADC_PHY_CONTROL, 0x00000001},
+    {"PCIe_PHY_CONTROL", PCIe_PHY_CONTROL, 0x00000000},
+    {"SATA_PHY_CONTROL", SATA_PHY_CONTROL, 0x00000000},
+    {"INFORM0", INFORM0, 0x00000000},
+    {"INFORM1", INFORM1, 0x00000000},
+    {"INFORM2", INFORM2, 0x00000000},
+    {"INFORM3", INFORM3, 0x00000000},
+    {"INFORM4", INFORM4, 0x00000000},
+    {"INFORM5", INFORM5, 0x00000000},
+    {"INFORM6", INFORM6, 0x00000000},
+    {"INFORM7", INFORM7, 0x00000000},
+    {"PMU_DEBUG", PMU_DEBUG, 0x00000000},
+    {"ARM_CORE0_SYS_PWR_REG", ARM_CORE0_SYS_PWR_REG, 0xFFFFFFFF},
+    {"ARM_CORE1_SYS_PWR_REG", ARM_CORE1_SYS_PWR_REG, 0xFFFFFFFF},
+    {"ARM_COMMON_SYS_PWR_REG", ARM_COMMON_SYS_PWR_REG, 0xFFFFFFFF},
+    {"ARM_CPU_L2_0_SYS_PWR_REG", ARM_CPU_L2_0_SYS_PWR_REG, 0xFFFFFFFF},
+    {"ARM_CPU_L2_1_SYS_PWR_REG", ARM_CPU_L2_1_SYS_PWR_REG, 0xFFFFFFFF},
+    {"CMU_ACLKSTOP_SYS_PWR_REG", CMU_ACLKSTOP_SYS_PWR_REG, 0xFFFFFFFF},
+    {"CMU_SCLKSTOP_SYS_PWR_REG", CMU_SCLKSTOP_SYS_PWR_REG, 0xFFFFFFFF},
+    {"CMU_RESET_SYS_PWR_REG", CMU_RESET_SYS_PWR_REG, 0xFFFFFFFF},
+    {"APLL_SYSCLK_SYS_PWR_REG", APLL_SYSCLK_SYS_PWR_REG, 0xFFFFFFFF},
+    {"MPLL_SYSCLK_SYS_PWR_REG", MPLL_SYSCLK_SYS_PWR_REG, 0xFFFFFFFF},
+    {"VPLL_SYSCLK_SYS_PWR_REG", VPLL_SYSCLK_SYS_PWR_REG, 0xFFFFFFFF},
+    {"EPLL_SYSCLK_SYS_PWR_REG", EPLL_SYSCLK_SYS_PWR_REG, 0xFFFFFFFF},
+    {"CMU_CLKSTOP_GPS_ALIVE_SYS_PWR_REG", CMU_CLKSTOP_GPS_ALIVE_SYS_PWR_REG,
+            0xFFFFFFFF},
+    {"CMU_RESET_GPS_ALIVE_SYS_PWR_REG", CMU_RESET_GPS_ALIVE_SYS_PWR_REG,
+            0xFFFFFFFF},
+    {"CMU_CLKSTOP_CAM_SYS_PWR_REG", CMU_CLKSTOP_CAM_SYS_PWR_REG, 0xFFFFFFFF},
+    {"CMU_CLKSTOP_TV_SYS_PWR_REG", CMU_CLKSTOP_TV_SYS_PWR_REG, 0xFFFFFFFF},
+    {"CMU_CLKSTOP_MFC_SYS_PWR_REG", CMU_CLKSTOP_MFC_SYS_PWR_REG, 0xFFFFFFFF},
+    {"CMU_CLKSTOP_G3D_SYS_PWR_REG", CMU_CLKSTOP_G3D_SYS_PWR_REG, 0xFFFFFFFF},
+    {"CMU_CLKSTOP_LCD0_SYS_PWR_REG", CMU_CLKSTOP_LCD0_SYS_PWR_REG, 0xFFFFFFFF},
+    {"CMU_CLKSTOP_LCD1_SYS_PWR_REG", CMU_CLKSTOP_LCD1_SYS_PWR_REG, 0xFFFFFFFF},
+    {"CMU_CLKSTOP_MAUDIO_SYS_PWR_REG", CMU_CLKSTOP_MAUDIO_SYS_PWR_REG,
+            0xFFFFFFFF},
+    {"CMU_CLKSTOP_GPS_SYS_PWR_REG", CMU_CLKSTOP_GPS_SYS_PWR_REG, 0xFFFFFFFF},
+    {"CMU_RESET_CAM_SYS_PWR_REG", CMU_RESET_CAM_SYS_PWR_REG, 0xFFFFFFFF},
+    {"CMU_RESET_TV_SYS_PWR_REG", CMU_RESET_TV_SYS_PWR_REG, 0xFFFFFFFF},
+    {"CMU_RESET_MFC_SYS_PWR_REG", CMU_RESET_MFC_SYS_PWR_REG, 0xFFFFFFFF},
+    {"CMU_RESET_G3D_SYS_PWR_REG", CMU_RESET_G3D_SYS_PWR_REG, 0xFFFFFFFF},
+    {"CMU_RESET_LCD0_SYS_PWR_REG", CMU_RESET_LCD0_SYS_PWR_REG, 0xFFFFFFFF},
+    {"CMU_RESET_LCD1_SYS_PWR_REG", CMU_RESET_LCD1_SYS_PWR_REG, 0xFFFFFFFF},
+    {"CMU_RESET_MAUDIO_SYS_PWR_REG", CMU_RESET_MAUDIO_SYS_PWR_REG, 0xFFFFFFFF},
+    {"CMU_RESET_GPS_SYS_PWR_REG", CMU_RESET_GPS_SYS_PWR_REG, 0xFFFFFFFF},
+    {"TOP_BUS_SYS_PWR_REG", TOP_BUS_SYS_PWR_REG, 0xFFFFFFFF},
+    {"TOP_RETENTION_SYS_PWR_REG", TOP_RETENTION_SYS_PWR_REG, 0xFFFFFFFF},
+    {"TOP_PWR_SYS_PWR_REG", TOP_PWR_SYS_PWR_REG, 0xFFFFFFFF},
+    {"LOGIC_RESET_SYS_PWR_REG", LOGIC_RESET_SYS_PWR_REG, 0xFFFFFFFF},
+    {"OneNANDXL_MEM_SYS_PWR_REG", OneNANDXL_MEM_SYS_PWR_REG, 0xFFFFFFFF},
+    {"MODEMIF_MEM_SYS_PWR_REG", MODEMIF_MEM_SYS_PWR_REG, 0xFFFFFFFF},
+    {"USBDEVICE_MEM_SYS_PWR_REG", USBDEVICE_MEM_SYS_PWR_REG, 0xFFFFFFFF},
+    {"SDMMC_MEM_SYS_PWR_REG", SDMMC_MEM_SYS_PWR_REG, 0xFFFFFFFF},
+    {"CSSYS_MEM_SYS_PWR_REG", CSSYS_MEM_SYS_PWR_REG, 0xFFFFFFFF},
+    {"SECSS_MEM_SYS_PWR_REG", SECSS_MEM_SYS_PWR_REG, 0xFFFFFFFF},
+    {"PCIe_MEM_SYS_PWR_REG", PCIe_MEM_SYS_PWR_REG, 0xFFFFFFFF},
+    {"SATA_MEM_SYS_PWR_REG", SATA_MEM_SYS_PWR_REG, 0xFFFFFFFF},
+    {"PAD_RETENTION_DRAM_SYS_PWR_REG", PAD_RETENTION_DRAM_SYS_PWR_REG,
+            0xFFFFFFFF},
+    {"PAD_RETENTION_MAUDIO_SYS_PWR_REG", PAD_RETENTION_MAUDIO_SYS_PWR_REG,
+            0xFFFFFFFF},
+    {"PAD_RETENTION_GPIO_SYS_PWR_REG", PAD_RETENTION_GPIO_SYS_PWR_REG,
+            0xFFFFFFFF},
+    {"PAD_RETENTION_UART_SYS_PWR_REG", PAD_RETENTION_UART_SYS_PWR_REG,
+            0xFFFFFFFF},
+    {"PAD_RETENTION_MMCA_SYS_PWR_REG", PAD_RETENTION_MMCA_SYS_PWR_REG,
+            0xFFFFFFFF},
+    {"PAD_RETENTION_MMCB_SYS_PWR_REG", PAD_RETENTION_MMCB_SYS_PWR_REG,
+            0xFFFFFFFF},
+    {"PAD_RETENTION_EBIA_SYS_PWR_REG", PAD_RETENTION_EBIA_SYS_PWR_REG,
+            0xFFFFFFFF},
+    {"PAD_RETENTION_EBIB_SYS_PWR_REG", PAD_RETENTION_EBIB_SYS_PWR_REG,
+            0xFFFFFFFF},
+    {"PAD_ISOLATION_SYS_PWR_REG", PAD_ISOLATION_SYS_PWR_REG, 0xFFFFFFFF},
+    {"PAD_ALV_SEL_SYS_PWR_REG", PAD_ALV_SEL_SYS_PWR_REG, 0xFFFFFFFF},
+    {"XUSBXTI_SYS_PWR_REG", XUSBXTI_SYS_PWR_REG, 0xFFFFFFFF},
+    {"XXTI_SYS_PWR_REG", XXTI_SYS_PWR_REG, 0xFFFFFFFF},
+    {"EXT_REGULATOR_SYS_PWR_REG", EXT_REGULATOR_SYS_PWR_REG, 0xFFFFFFFF},
+    {"GPIO_MODE_SYS_PWR_REG", GPIO_MODE_SYS_PWR_REG, 0xFFFFFFFF},
+    {"GPIO_MODE_MAUDIO_SYS_PWR_REG", GPIO_MODE_MAUDIO_SYS_PWR_REG, 0xFFFFFFFF},
+    {"CAM_SYS_PWR_REG", CAM_SYS_PWR_REG, 0xFFFFFFFF},
+    {"TV_SYS_PWR_REG", TV_SYS_PWR_REG, 0xFFFFFFFF},
+    {"MFC_SYS_PWR_REG", MFC_SYS_PWR_REG, 0xFFFFFFFF},
+    {"G3D_SYS_PWR_REG", G3D_SYS_PWR_REG, 0xFFFFFFFF},
+    {"LCD0_SYS_PWR_REG", LCD0_SYS_PWR_REG, 0xFFFFFFFF},
+    {"LCD1_SYS_PWR_REG", LCD1_SYS_PWR_REG, 0xFFFFFFFF},
+    {"MAUDIO_SYS_PWR_REG", MAUDIO_SYS_PWR_REG, 0xFFFFFFFF},
+    {"GPS_SYS_PWR_REG", GPS_SYS_PWR_REG, 0xFFFFFFFF},
+    {"GPS_ALIVE_SYS_PWR_REG", GPS_ALIVE_SYS_PWR_REG, 0xFFFFFFFF},
+    {"ARM_CORE0_CONFIGURATION", ARM_CORE0_CONFIGURATION, 0x00000003},
+    {"ARM_CORE0_STATUS", ARM_CORE0_STATUS, 0x00030003},
+    {"ARM_CORE0_OPTION", ARM_CORE0_OPTION, 0x01010001},
+    {"ARM_CORE1_CONFIGURATION", ARM_CORE1_CONFIGURATION, 0x00000003},
+    {"ARM_CORE1_STATUS", ARM_CORE1_STATUS, 0x00030003},
+    {"ARM_CORE1_OPTION", ARM_CORE1_OPTION, 0x01010001},
+    {"ARM_COMMON_OPTION", ARM_COMMON_OPTION, 0x00000001},
+    {"ARM_CPU_L2_0_CONFIGURATION", ARM_CPU_L2_0_CONFIGURATION, 0x00000003},
+    {"ARM_CPU_L2_0_STATUS", ARM_CPU_L2_0_STATUS, 0x00000003},
+    {"ARM_CPU_L2_1_CONFIGURATION", ARM_CPU_L2_1_CONFIGURATION, 0x00000003},
+    {"ARM_CPU_L2_1_STATUS", ARM_CPU_L2_1_STATUS, 0x00000003},
+    {"PAD_RETENTION_MAUDIO_OPTION", PAD_RETENTION_MAUDIO_OPTION, 0x00000000},
+    {"PAD_RETENTION_GPIO_OPTION", PAD_RETENTION_GPIO_OPTION, 0x00000000},
+    {"PAD_RETENTION_UART_OPTION", PAD_RETENTION_UART_OPTION, 0x00000000},
+    {"PAD_RETENTION_MMCA_OPTION", PAD_RETENTION_MMCA_OPTION, 0x00000000},
+    {"PAD_RETENTION_MMCB_OPTION", PAD_RETENTION_MMCB_OPTION, 0x00000000},
+    {"PAD_RETENTION_EBIA_OPTION", PAD_RETENTION_EBIA_OPTION, 0x00000000},
+    {"PAD_RETENTION_EBIB_OPTION", PAD_RETENTION_EBIB_OPTION, 0x00000000},
+    {"PS_HOLD_CONTROL", PS_HOLD_CONTROL, 0x00005200},
+    {"XUSBXTI_CONFIGURATION", XUSBXTI_CONFIGURATION, 0x00000001},
+    {"XUSBXTI_STATUS", XUSBXTI_STATUS, 0x00000001},
+    {"XUSBXTI_DURATION", XUSBXTI_DURATION, 0xFFF00000},
+    {"XXTI_CONFIGURATION", XXTI_CONFIGURATION, 0x00000001},
+    {"XXTI_STATUS", XXTI_STATUS, 0x00000001},
+    {"XXTI_DURATION", XXTI_DURATION, 0xFFF00000},
+    {"EXT_REGULATOR_DURATION", EXT_REGULATOR_DURATION, 0xFFF03FFF},
+    {"CAM_CONFIGURATION", CAM_CONFIGURATION, 0x00000007},
+    {"CAM_STATUS", CAM_STATUS, 0x00060007},
+    {"CAM_OPTION", CAM_OPTION, 0x00000001},
+    {"TV_CONFIGURATION", TV_CONFIGURATION, 0x00000007},
+    {"TV_STATUS", TV_STATUS, 0x00060007},
+    {"TV_OPTION", TV_OPTION, 0x00000001},
+    {"MFC_CONFIGURATION", MFC_CONFIGURATION, 0x00000007},
+    {"MFC_STATUS", MFC_STATUS, 0x00060007},
+    {"MFC_OPTION", MFC_OPTION, 0x00000001},
+    {"G3D_CONFIGURATION", G3D_CONFIGURATION, 0x00000007},
+    {"G3D_STATUS", G3D_STATUS, 0x00060007},
+    {"G3D_OPTION", G3D_OPTION, 0x00000001},
+    {"LCD0_CONFIGURATION", LCD0_CONFIGURATION, 0x00000007},
+    {"LCD0_STATUS", LCD0_STATUS, 0x00060007},
+    {"LCD0_OPTION", LCD0_OPTION, 0x00000001},
+    {"LCD1_CONFIGURATION", LCD1_CONFIGURATION, 0x00000007},
+    {"LCD1_STATUS", LCD1_STATUS, 0x00060007},
+    {"LCD1_OPTION", LCD1_OPTION, 0x00000001},
+    {"GPS_CONFIGURATION", GPS_CONFIGURATION, 0x00000007},
+    {"GPS_STATUS", GPS_STATUS, 0x00060007},
+    {"GPS_OPTION", GPS_OPTION, 0x00000001},
+    {"GPS_ALIVE_CONFIGURATION", GPS_ALIVE_CONFIGURATION, 0x00000007},
+    {"GPS_ALIVE_STATUS", GPS_ALIVE_STATUS, 0x00060007},
+    {"GPS_ALIVE_OPTION", GPS_ALIVE_OPTION, 0x00000001},
+};
+
+#define PMU_NUM_OF_REGISTERS     \
+    (sizeof(exynos4210_pmu_regs) / sizeof(Exynos4210PmuReg))
+
+typedef struct Exynos4210PmuState {
+    SysBusDevice busdev;
+    MemoryRegion iomem;
+    uint32_t reg[PMU_NUM_OF_REGISTERS];
+} Exynos4210PmuState;
+
+static uint64_t exynos4210_pmu_read(void *opaque, target_phys_addr_t offset,
+                                    unsigned size)
+{
+    Exynos4210PmuState *s = (Exynos4210PmuState *)opaque;
+    unsigned i;
+    const Exynos4210PmuReg *reg_p = exynos4210_pmu_regs;
+
+    for (i = 0; i < PMU_NUM_OF_REGISTERS; i++) {
+        if (reg_p->offset == offset) {
+            PRINT_DEBUG_EXTEND("%s [0x%04x] -> 0x%04x\n", reg_p->name,
+                                   (uint32_t)offset, s->reg[i]);
+            return s->reg[i];
+        }
+        reg_p++;
+    }
+    PRINT_DEBUG("QEMU PMU ERROR: bad read offset 0x%04x\n", (uint32_t)offset);
+    return 0;
+}
+
+static void exynos4210_pmu_write(void *opaque, target_phys_addr_t offset,
+                                 uint64_t val, unsigned size)
+{
+    Exynos4210PmuState *s = (Exynos4210PmuState *)opaque;
+    unsigned i;
+    const Exynos4210PmuReg *reg_p = exynos4210_pmu_regs;
+
+    for (i = 0; i < PMU_NUM_OF_REGISTERS; i++) {
+        if (reg_p->offset == offset) {
+            PRINT_DEBUG_EXTEND("%s <0x%04x> <- 0x%04x\n", reg_p->name,
+                    (uint32_t)offset, (uint32_t)val);
+            s->reg[i] = val;
+            return;
+        }
+        reg_p++;
+    }
+    PRINT_DEBUG("QEMU PMU ERROR: bad write offset 0x%04x\n", (uint32_t)offset);
+}
+
+static const MemoryRegionOps exynos4210_pmu_ops = {
+    .read = exynos4210_pmu_read,
+    .write = exynos4210_pmu_write,
+    .endianness = DEVICE_NATIVE_ENDIAN,
+    .valid = {
+        .min_access_size = 4,
+        .max_access_size = 4,
+        .unaligned = false
+    }
+};
+
+static void exynos4210_pmu_reset(DeviceState *dev)
+{
+    Exynos4210PmuState *s =
+            container_of(dev, Exynos4210PmuState, busdev.qdev);
+    unsigned i;
+
+    /* Set default values for registers */
+    for (i = 0; i < PMU_NUM_OF_REGISTERS; i++) {
+        s->reg[i] = exynos4210_pmu_regs[i].reset_value;
+    }
+}
+
+static int exynos4210_pmu_init(SysBusDevice *dev)
+{
+    Exynos4210PmuState *s = FROM_SYSBUS(Exynos4210PmuState, dev);
+
+    /* memory mapping */
+    memory_region_init_io(&s->iomem, &exynos4210_pmu_ops, s, "exynos4210.pmu",
+                          EXYNOS4210_PMU_REGS_MEM_SIZE);
+    sysbus_init_mmio(dev, &s->iomem);
+    return 0;
+}
+
+static const VMStateDescription exynos4210_pmu_vmstate = {
+    .name = "exynos4210.pmu",
+    .version_id = 1,
+    .minimum_version_id = 1,
+    .fields      = (VMStateField[]) {
+        VMSTATE_UINT32_ARRAY(reg, Exynos4210PmuState, PMU_NUM_OF_REGISTERS),
+        VMSTATE_END_OF_LIST()
+    }
+};
+
+static void exynos4210_pmu_class_init(ObjectClass *klass, void *data)
+{
+    SysBusDeviceClass *k = SYS_BUS_DEVICE_CLASS(klass);
+
+    k->init = exynos4210_pmu_init;
+}
+
+static DeviceInfo exynos4210_pmu_info = {
+    .name = "exynos4210.pmu",
+    .size = sizeof(Exynos4210PmuState),
+    .reset = exynos4210_pmu_reset,
+    .vmsd = &exynos4210_pmu_vmstate,
+    .class_init = exynos4210_pmu_class_init,
+};
+
+static void exynos4210_pmu_register(void)
+{
+    sysbus_register_withprop(&exynos4210_pmu_info);
+}
+
+device_init(exynos4210_pmu_register)