diff mbox

[net-next,01/10] bnx2x: Support Queue Per Cos in 5771xx devices

Message ID 1327593714-18358-2-git-send-email-ariele@broadcom.com
State Accepted, archived
Delegated to: David Miller
Headers show

Commit Message

Ariel Elior Jan. 26, 2012, 4:01 p.m. UTC 
Enable the use of up to three hardware queues for transmission. The queues
are always dequed round robin (i.e. strict priority, PFC and ETS are not
supported). This does allow the allocation of a seperate HW queue for low
volume, high priority traffic which will be serviced more promptly.

Signed-off-by: Ariel Elior <ariele@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
---
 drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h |    7 ++++---
 drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.h  |    4 ++--
 2 files changed, 6 insertions(+), 5 deletions(-)
diff mbox

Patch

diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h
index bf27c54..0dd22bb 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h
@@ -984,10 +984,11 @@  static inline int bnx2x_func_start(struct bnx2x *bp)
 	/* Function parameters */
 	start_params->mf_mode = bp->mf_mode;
 	start_params->sd_vlan_tag = bp->mf_ov;
-	if (CHIP_IS_E1x(bp))
-		start_params->network_cos_mode = OVERRIDE_COS;
-	else
+
+	if (CHIP_IS_E2(bp) || CHIP_IS_E3(bp))
 		start_params->network_cos_mode = STATIC_COS;
+	else /* CHIP_IS_E1X */
+		start_params->network_cos_mode = FW_WRR;
 
 	return bnx2x_func_state_change(bp, &func_params);
 }
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.h
index 66da39f..f33bc57 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.h
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.h
@@ -803,10 +803,10 @@  enum bnx2x_q_type {
 };
 
 #define BNX2X_PRIMARY_CID_INDEX			0
-#define BNX2X_MULTI_TX_COS_E1X			1
+#define BNX2X_MULTI_TX_COS_E1X			3 /* QM only */
 #define BNX2X_MULTI_TX_COS_E2_E3A0		2
 #define BNX2X_MULTI_TX_COS_E3B0			3
-#define BNX2X_MULTI_TX_COS			BNX2X_MULTI_TX_COS_E3B0
+#define BNX2X_MULTI_TX_COS			3 /* Maximum possible */
 
 
 struct bnx2x_queue_init_params {