@@ -219,3 +219,35 @@
##
{ 'command': 'guest-fsfreeze-thaw',
'returns': 'int' }
+
+##
+# @guest-suspend
+#
+# Suspend guest execution by entering ACPI power state S3 or S4.
+#
+# This command tries to execute the scripts provided by the pm-utils
+# package. If they are not available, it will perform the suspend
+# operation by manually writing to a sysfs file.
+#
+# For the best results it's strongly recommended to have the pm-utils
+# package installed in the guest.
+#
+# @mode: 'hibernate' RAM content is saved to the disk and the guest is
+# powered off (this corresponds to ACPI S4)
+# 'sleep' execution is suspended but the RAM retains its contents
+# (this corresponds to ACPI S3)
+# 'hybrid' RAM content is saved to the disk but the guest is
+# suspended instead of powering off
+#
+# Returns: nothing on success
+# If @mode is not supported by the guest, Unsupported
+#
+# Notes: o This is an asynchronous request. There's no guarantee a response
+# will be sent.
+# o Errors will be logged to guest's syslog.
+# o It's strongly recommended to issue the guest-sync command before
+# sending commands when the guest resumes.
+#
+# Since: 1.1
+##
+{ 'command': 'guest-suspend', 'data': { 'mode': 'str' } }
@@ -17,6 +17,7 @@
#include <getopt.h>
#include <termios.h>
#include <syslog.h>
+#include <sys/wait.h>
#include "qemu_socket.h"
#include "json-streamer.h"
#include "json-parser.h"
@@ -59,9 +60,16 @@ static void quit_handler(int sig)
}
}
+/* reap _all_ terminated children */
+static void child_handler(int sig)
+{
+ int status;
+ while (waitpid(-1, &status, WNOHANG) > 0) /* NOTHING */;
+}
+
static void register_signal_handlers(void)
{
- struct sigaction sigact;
+ struct sigaction sigact, sigact_chld;
int ret;
memset(&sigact, 0, sizeof(struct sigaction));
@@ -76,6 +84,14 @@ static void register_signal_handlers(void)
if (ret == -1) {
g_error("error configuring signal handler: %s", strerror(errno));
}
+
+ memset(&sigact_chld, 0, sizeof(struct sigaction));
+ sigact_chld.sa_handler = child_handler;
+ sigact_chld.sa_flags = SA_NOCLDSTOP;
+ ret = sigaction(SIGCHLD, &sigact_chld, NULL);
+ if (ret == -1) {
+ g_error("error configuring signal handler: %s", strerror(errno));
+ }
}
static void usage(const char *cmd)
@@ -23,6 +23,7 @@
#include <sys/types.h>
#include <sys/ioctl.h>
+#include <sys/wait.h>
#include "qga/guest-agent-core.h"
#include "qga-qmp-commands.h"
#include "qerror.h"
@@ -44,6 +45,22 @@ static void slog(const char *fmt, ...)
va_end(ap);
}
+static void reopen_fd_to_null(int fd)
+{
+ int nullfd;
+
+ nullfd = open("/dev/null", O_RDWR);
+ if (nullfd < 0) {
+ return;
+ }
+
+ dup2(nullfd, fd);
+
+ if (nullfd != fd) {
+ close(nullfd);
+ }
+}
+
int64_t qmp_guest_sync(int64_t id, Error **errp)
{
return id;
@@ -574,6 +591,215 @@ int64_t qmp_guest_fsfreeze_thaw(Error **err)
}
#endif
+#define LINUX_SYS_STATE_FILE "/sys/power/state"
+#define SUS_MODE_SUPPORTED 0
+#define SUS_MODE_NOT_SUPPORTED 1
+
+/**
+ * This function forks twice and the information about the mode support
+ * status is passed to the qemu-ga process via a pipe.
+ *
+ * This approach allows us to keep the way we reap terminated children
+ * in qemu-ga quite simple.
+ */
+static bool bios_supports_mode(const char *mode, Error **err)
+{
+ pid_t pid;
+ ssize_t ret;
+ int status, pipefds[2];
+ char *pmutils_path;
+ const char *pmutils_bin = "pm-is-supported";
+
+ if (pipe(pipefds) < 0) {
+ error_set(err, QERR_UNDEFINED_ERROR);
+ return false;
+ }
+
+ pmutils_path = g_find_program_in_path(pmutils_bin);
+
+ pid = fork();
+ if (!pid) {
+ struct sigaction act;
+
+ memset(&act, 0, sizeof(act));
+ act.sa_handler = SIG_DFL;
+ sigaction(SIGCHLD, &act, NULL);
+
+ setsid();
+ close(pipefds[0]);
+ reopen_fd_to_null(0);
+ reopen_fd_to_null(1);
+ reopen_fd_to_null(2);
+
+ pid = fork();
+ if (!pid) {
+ int fd;
+ char buf[32]; /* hopefully big enough */
+ const char *arg;
+
+ if (strcmp(mode, "hibernate") == 0) {
+ arg = "--hibernate";
+ } else if (strcmp(mode, "sleep") == 0) {
+ arg = "--suspend";
+ } else if (strcmp(mode, "hybrid") == 0) {
+ arg = "--suspend-hybrid";
+ } else {
+ _exit(SUS_MODE_NOT_SUPPORTED);
+ }
+
+ if (pmutils_path) {
+ execle(pmutils_path, pmutils_bin, arg, NULL, environ);
+ }
+
+ /*
+ * If we get here either pm-utils is not installed or execle() has
+ * failed. Let's try the manual approach if mode is not hybrid (as
+ * it's only supported by pm-utils)
+ */
+
+ if (strcmp(mode, "hybrid") == 0) {
+ _exit(SUS_MODE_NOT_SUPPORTED);
+ }
+
+ fd = open(LINUX_SYS_STATE_FILE, O_RDONLY);
+ if (fd < 0) {
+ _exit(SUS_MODE_NOT_SUPPORTED);
+ }
+
+ ret = read(fd, buf, sizeof(buf)-1);
+ if (ret <= 0) {
+ _exit(SUS_MODE_NOT_SUPPORTED);
+ }
+ buf[ret] = '\0';
+
+ if (strcmp(mode, "hibernate") == 0 && strstr(buf, "disk")) {
+ _exit(SUS_MODE_SUPPORTED);
+ } else if (strcmp(mode, "sleep") == 0 && strstr(buf, "mem")) {
+ _exit(SUS_MODE_SUPPORTED);
+ }
+
+ _exit(SUS_MODE_NOT_SUPPORTED);
+ }
+
+ if (pid > 0) {
+ wait(&status);
+ } else {
+ status = SUS_MODE_NOT_SUPPORTED;
+ }
+
+ ret = write(pipefds[1], &status, sizeof(status));
+ if (ret != sizeof(status)) {
+ _exit(EXIT_FAILURE);
+ }
+
+ _exit(EXIT_SUCCESS);
+ }
+
+ close(pipefds[1]);
+ g_free(pmutils_path);
+
+ if (pid > 0) {
+ ret = read(pipefds[0], &status, sizeof(status));
+ if (ret == sizeof(status) && WIFEXITED(status) &&
+ WEXITSTATUS(status) == SUS_MODE_SUPPORTED) {
+ close(pipefds[0]);
+ return true;
+ }
+ }
+
+ close(pipefds[0]);
+ return false;
+}
+
+static bool host_supports_mode(const char *mode)
+{
+ if (strcmp(mode, "hibernate")) {
+ /* sleep & hybrid are only supported in qemu 1.1.0 and above */
+ return ga_has_support_level(1, 1, 0);
+ }
+ return true;
+}
+
+void qmp_guest_suspend(const char *mode, Error **err)
+{
+ pid_t pid;
+ char *pmutils_path;
+ const char *pmutils_bin;
+ Error *local_err = NULL;
+
+ if (strcmp(mode, "hibernate") == 0) {
+ pmutils_bin = "pm-hibernate";
+ } else if (strcmp(mode, "sleep") == 0) {
+ pmutils_bin = "pm-suspend";
+ } else if (strcmp(mode, "hybrid") == 0) {
+ pmutils_bin = "pm-suspend-hybrid";
+ } else {
+ error_set(err, QERR_INVALID_PARAMETER, "mode");
+ return;
+ }
+
+ if (!host_supports_mode(mode)) {
+ error_set(err, QERR_UNSUPPORTED);
+ return;
+ }
+
+ if (!bios_supports_mode(mode, &local_err)) {
+ if (error_is_set(&local_err)) {
+ error_propagate(err, local_err);
+ } else {
+ error_set(err, QERR_UNSUPPORTED);
+ }
+ return;
+ }
+
+ pmutils_path = g_find_program_in_path(pmutils_bin);
+
+ pid = fork();
+ if (pid == 0) {
+ /* child */
+ int fd;
+ const char *cmd;
+
+ setsid();
+ reopen_fd_to_null(0);
+ reopen_fd_to_null(1);
+ reopen_fd_to_null(2);
+
+ if (pmutils_path) {
+ execle(pmutils_path, pmutils_bin, NULL, environ);
+ }
+
+ /*
+ * If we get here either pm-utils is not installed or execle() has
+ * failed. Let's try the manual approach if mode is not hybrid (as
+ * it's only supported by pm-utils)
+ */
+
+ if (strcmp(mode, "hybrid") == 0) {
+ _exit(EXIT_FAILURE);
+ }
+
+ fd = open(LINUX_SYS_STATE_FILE, O_WRONLY);
+ if (fd < 0) {
+ _exit(EXIT_FAILURE);
+ }
+
+ cmd = strcmp(mode, "sleep") == 0 ? "mem" : "disk";
+ if (write(fd, cmd, strlen(cmd)) < 0) {
+ _exit(EXIT_FAILURE);
+ }
+
+ _exit(EXIT_SUCCESS);
+ }
+
+ g_free(pmutils_path);
+
+ if (pid < 0) {
+ error_set(err, QERR_UNDEFINED_ERROR);
+ return;
+ }
+}
+
/* register init/cleanup routines for stateful command groups */
void ga_command_state_init(GAState *s, GACommandState *cs)
{
The guest-suspend command supports three modes: o hibernate (suspend to disk) o sleep (suspend to ram) o hybrid (save RAM contents to disk, but suspend instead of powering off) Before trying to suspend, the command queries the guest in order to know whether the given mode is supported. The sleep and hybrid modes are only supported in QEMU 1.1 and later though, because QEMU's S3 support is broken in previous versions. The guest-suspend command will use the scripts provided by the pm-utils package if they are available. If they aren't, a manual process which directly writes to the "/sys/power/state" file is used. To reap terminated children, a new signal handler is installed in the parent to catch SIGCHLD signals and a non-blocking call to waitpid() is done to collect their exit statuses. The statuses, however, are discarded. The approach used to query the guest for suspend support deserves some explanation. It's implemented by bios_supports_mode() and shown below: qemu-ga | create pipe | fork() ----------------- | | | | | fork() | -------------------------- | | | | | | | | exec('pm-is-supported') | | | wait() | write exit status to pipe | exit | read pipe This might look complex, but the resulting code is quite simple. The purpose of that approach is to allow qemu-ga to reap its children (semi-)automatically from its SIGCHLD handler. Implementing this the obvious way, that's, doing the exec() call from the first child process, would force us to introduce a more complex way to reap qemu-ga's children. Like registering PIDs to be reaped and having a way to wait for them when returning their exit status to qemu-ga is necessary. The approach explained above avoids that complexity. Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com> --- qapi-schema-guest.json | 32 ++++++ qemu-ga.c | 18 ++++- qga/guest-agent-commands.c | 226 ++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 275 insertions(+), 1 deletions(-)