diff --git a/drivers/scsi/libsas/sas_ata.c b/drivers/scsi/libsas/sas_ata.c
index 0ee6831..d14af22 100644
--- a/drivers/scsi/libsas/sas_ata.c
+++ b/drivers/scsi/libsas/sas_ata.c
@@ -278,26 +278,84 @@ static struct sas_internal *dev_to_sas_internal(struct domain_device *dev)
 	return to_sas_internal(dev->port->ha->core.shost->transportt);
 }
 
+static void sas_get_ata_command_set(struct domain_device *dev);
+
+int sas_get_ata_info(struct domain_device *dev, struct ex_phy *phy)
+{
+	if (phy->attached_tproto & SAS_PROTOCOL_STP)
+		dev->tproto = phy->attached_tproto;
+	if (phy->attached_sata_dev)
+		dev->tproto |= SATA_DEV;
+
+	if (phy->attached_dev_type == SATA_PENDING)
+		dev->dev_type = SATA_PENDING;
+	else {
+		int res;
+
+		dev->dev_type = SATA_DEV;
+		res = sas_get_report_phy_sata(dev->parent, phy->phy_id,
+					      &dev->sata_dev.rps_resp);
+		if (res) {
+			SAS_DPRINTK("report phy sata to %016llx:0x%x returned "
+				    "0x%x\n", SAS_ADDR(dev->parent->sas_addr),
+				    phy->phy_id, res);
+			return res;
+		}
+		memcpy(dev->frame_rcvd, &dev->sata_dev.rps_resp.rps.fis,
+		       sizeof(struct dev_to_host_fis));
+		/* TODO switch to ata_dev_classify() */
+		sas_get_ata_command_set(dev);
+	}
+	return 0;
+}
+
+static int sas_ata_clear_pending(struct domain_device *dev, struct ex_phy *phy)
+{
+	int res;
+
+	/* we weren't pending, so successfully end the reset sequence now */
+	if (dev->dev_type != SATA_PENDING)
+		return 1;
+
+	/* hmmm, if this succeeds do we need to repost the domain_device to the
+	 * lldd so it can pick up new parameters?
+	 */
+	res = sas_get_ata_info(dev, phy);
+	if (res)
+		return 0; /* retry */
+	else
+		return 1;
+}
+
 static int smp_ata_check_ready(struct ata_link *link)
 {
 	int res;
-	u8 addr[8];
 	struct ata_port *ap = link->ap;
 	struct domain_device *dev = ap->private_data;
 	struct domain_device *ex_dev = dev->parent;
 	struct sas_phy *phy = sas_get_local_phy(dev);
+	struct ex_phy *ex_phy = &ex_dev->ex_dev.ex_phy[phy->number];
 
-	res = sas_get_phy_attached_sas_addr(ex_dev, phy->number, addr);
+	res = sas_ex_phy_discover(ex_dev, phy->number);
 	sas_put_local_phy(phy);
+
 	/* break the wait early if the expander is unreachable,
 	 * otherwise keep polling
 	 */
 	if (res == -ECOMM)
 		return res;
-	if (res != SMP_RESP_FUNC_ACC || SAS_ADDR(addr) == 0)
+	if (res != SMP_RESP_FUNC_ACC)
 		return 0;
-	else
-		return 1;
+
+	switch (ex_phy->attached_dev_type) {
+	case SATA_PENDING:
+		return 0;
+	case SAS_END_DEV:
+		if (ex_phy->attached_sata_dev)
+			return sas_ata_clear_pending(dev, ex_phy);
+	default:
+		return -ENODEV;
+	}
 }
 
 static int local_ata_check_ready(struct ata_link *link)
@@ -562,6 +620,9 @@ static void sas_get_ata_command_set(struct domain_device *dev)
 	struct dev_to_host_fis *fis =
 		(struct dev_to_host_fis *) dev->frame_rcvd;
 
+	if (dev->dev_type == SATA_PENDING)
+		return;
+
 	if ((fis->sector_count == 1 && /* ATA */
 	     fis->lbal         == 1 &&
 	     fis->lbam         == 0 &&
diff --git a/drivers/scsi/libsas/sas_discover.c b/drivers/scsi/libsas/sas_discover.c
index c6681b4..dc8baef 100644
--- a/drivers/scsi/libsas/sas_discover.c
+++ b/drivers/scsi/libsas/sas_discover.c
@@ -48,6 +48,7 @@ void sas_init_dev(struct domain_device *dev)
         case SATA_DEV:
         case SATA_PM:
         case SATA_PM_PORT:
+	case SATA_PENDING:
                 INIT_LIST_HEAD(&dev->sata_dev.children);
                 break;
         default:
diff --git a/drivers/scsi/libsas/sas_expander.c b/drivers/scsi/libsas/sas_expander.c
index 68a80a0..18aef30 100644
--- a/drivers/scsi/libsas/sas_expander.c
+++ b/drivers/scsi/libsas/sas_expander.c
@@ -166,17 +166,15 @@ static inline void *alloc_smp_resp(int size)
 	return kzalloc(size, GFP_KERNEL);
 }
 
-/* ---------- Expander configuration ---------- */
-
-static void sas_set_ex_phy(struct domain_device *dev, int phy_id,
-			   void *disc_resp)
+static void sas_set_ex_phy(struct domain_device *dev, int phy_id, void *rsp)
 {
+	struct smp_resp *resp = rsp;
+	struct discover_resp *dr = &resp->disc;
 	struct expander_device *ex = &dev->ex_dev;
 	struct ex_phy *phy = &ex->ex_phy[phy_id];
-	struct smp_resp *resp = disc_resp;
-	struct discover_resp *dr = &resp->disc;
 	struct sas_rphy *rphy = dev->rphy;
-	int rediscover = (phy->phy != NULL);
+	int rediscover = !!phy->phy;
+	char *type;
 
 	if (!rediscover) {
 		phy->phy = sas_phy_alloc(&rphy->dev, phy_id);
@@ -197,8 +195,14 @@ static void sas_set_ex_phy(struct domain_device *dev, int phy_id,
 		break;
 	}
 
+	/* This is detecting a failure to transmit initial dev to host
+	 * FIS as described in section J.5 of sas-2 r16
+	 */
+	if (dr->attached_dev_type == NO_DEVICE && dr->attached_sata_dev)
+		phy->attached_dev_type = SATA_PENDING;
+	else
+		phy->attached_dev_type = dr->attached_dev_type;
 	phy->phy_id = phy_id;
-	phy->attached_dev_type = dr->attached_dev_type;
 	phy->linkrate = dr->linkrate;
 	phy->attached_sata_host = dr->attached_sata_host;
 	phy->attached_sata_dev  = dr->attached_sata_dev;
@@ -213,7 +217,7 @@ static void sas_set_ex_phy(struct domain_device *dev, int phy_id,
 	phy->last_da_index = -1;
 
 	phy->phy->identify.sas_address = SAS_ADDR(phy->attached_sas_addr);
-	phy->phy->identify.device_type = phy->attached_dev_type;
+	phy->phy->identify.device_type = dr->attached_dev_type;
 	phy->phy->identify.initiator_port_protocols = phy->attached_iproto;
 	phy->phy->identify.target_port_protocols = phy->attached_tproto;
 	phy->phy->identify.phy_identifier = phy_id;
@@ -229,14 +233,33 @@ static void sas_set_ex_phy(struct domain_device *dev, int phy_id,
 			return;
 		}
 
-	SAS_DPRINTK("ex %016llx phy%02d:%c attached: %016llx\n",
+	switch (phy->attached_dev_type) {
+	case SATA_PENDING:
+		type = "stp pending";
+		break;
+	case NO_DEVICE:
+		type = "no device";
+		break;
+	case SAS_END_DEV:
+		if (dr->attached_sata_dev)
+			type = "stp";
+		else
+			type = "ssp";
+		break;
+	case EDGE_DEV:
+	case FANOUT_DEV:
+		type = "smp";
+		break;
+	default:
+		type = "unknown";
+	}
+
+	SAS_DPRINTK("ex %016llx phy%02d:%c attached: %016llx (%s)\n",
 		    SAS_ADDR(dev->sas_addr), phy->phy_id,
 		    phy->routing_attr == TABLE_ROUTING ? 'T' :
 		    phy->routing_attr == DIRECT_ROUTING ? 'D' :
 		    phy->routing_attr == SUBTRACTIVE_ROUTING ? 'S' : '?',
-		    SAS_ADDR(phy->attached_sas_addr));
-
-	return;
+		    SAS_ADDR(phy->attached_sas_addr), type);
 }
 
 /* check if we have an existing attached ata device on this expander phy */
@@ -267,50 +290,25 @@ struct domain_device *sas_ex_to_ata(struct domain_device *ex_dev, int phy_id)
 static int sas_ex_phy_discover_helper(struct domain_device *dev, u8 *disc_req,
 				      u8 *disc_resp, int single)
 {
-	struct domain_device *ata_dev = sas_ex_to_ata(dev, single);
-	int i, res;
+	struct discover_resp *dr;
+	int res;
 
 	disc_req[9] = single;
-	for (i = 1 ; i < 3; i++) {
-		struct discover_resp *dr;
 
-		res = smp_execute_task(dev, disc_req, DISCOVER_REQ_SIZE,
-				       disc_resp, DISCOVER_RESP_SIZE);
-		if (res)
-			return res;
-		dr = &((struct smp_resp *)disc_resp)->disc;
-		if (memcmp(dev->sas_addr, dr->attached_sas_addr,
-			  SAS_ADDR_SIZE) == 0) {
-			sas_printk("Found loopback topology, just ignore it!\n");
-			return 0;
-		}
-
-		/* This is detecting a failure to transmit initial
-		 * dev to host FIS as described in section J.5 of
-		 * sas-2 r16
-		 */
-		if (!(dr->attached_dev_type == 0 &&
-		      dr->attached_sata_dev))
-			break;
-
-		/* In order to generate the dev to host FIS, we send a
-		 * link reset to the expander port.  If a device was
-		 * previously detected on this port we ask libata to
-		 * manage the reset and link recovery.
-		 */
-		if (ata_dev) {
-			sas_ata_schedule_reset(ata_dev);
-			break;
-		}
-		sas_smp_phy_control(dev, single, PHY_FUNC_LINK_RESET, NULL);
-		/* Wait for the reset to trigger the negotiation */
-		msleep(500);
+	res = smp_execute_task(dev, disc_req, DISCOVER_REQ_SIZE,
+			       disc_resp, DISCOVER_RESP_SIZE);
+	if (res)
+		return res;
+	dr = &((struct smp_resp *)disc_resp)->disc;
+	if (memcmp(dev->sas_addr, dr->attached_sas_addr, SAS_ADDR_SIZE) == 0) {
+		sas_printk("Found loopback topology, just ignore it!\n");
+		return 0;
 	}
 	sas_set_ex_phy(dev, single, disc_resp);
 	return 0;
 }
 
-static int sas_ex_phy_discover(struct domain_device *dev, int single)
+int sas_ex_phy_discover(struct domain_device *dev, int single)
 {
 	struct expander_device *ex = &dev->ex_dev;
 	int  res = 0;
@@ -615,9 +613,8 @@ int sas_smp_get_phy_events(struct sas_phy *phy)
 #define RPS_REQ_SIZE  16
 #define RPS_RESP_SIZE 60
 
-static int sas_get_report_phy_sata(struct domain_device *dev,
-					  int phy_id,
-					  struct smp_resp *rps_resp)
+int sas_get_report_phy_sata(struct domain_device *dev, int phy_id,
+			    struct smp_resp *rps_resp)
 {
 	int res;
 	u8 *rps_req = alloc_smp_req(RPS_REQ_SIZE);
@@ -727,21 +724,9 @@ static struct domain_device *sas_ex_discover_end_dev(
 
 #ifdef CONFIG_SCSI_SAS_ATA
 	if ((phy->attached_tproto & SAS_PROTOCOL_STP) || phy->attached_sata_dev) {
-		child->dev_type = SATA_DEV;
-		if (phy->attached_tproto & SAS_PROTOCOL_STP)
-			child->tproto = phy->attached_tproto;
-		if (phy->attached_sata_dev)
-			child->tproto |= SATA_DEV;
-		res = sas_get_report_phy_sata(parent, phy_id,
-					      &child->sata_dev.rps_resp);
-		if (res) {
-			SAS_DPRINTK("report phy sata to %016llx:0x%x returned "
-				    "0x%x\n", SAS_ADDR(parent->sas_addr),
-				    phy_id, res);
+		res = sas_get_ata_info(child, phy);
+		if (res)
 			goto out_free;
-		}
-		memcpy(child->frame_rcvd, &child->sata_dev.rps_resp.rps.fis,
-		       sizeof(struct dev_to_host_fis));
 
 		rphy = sas_end_device_alloc(phy->port);
 		if (unlikely(!rphy))
@@ -956,7 +941,8 @@ static int sas_ex_discover_dev(struct domain_device *dev, int phy_id)
 
 	if (ex_phy->attached_dev_type != SAS_END_DEV &&
 	    ex_phy->attached_dev_type != FANOUT_DEV &&
-	    ex_phy->attached_dev_type != EDGE_DEV) {
+	    ex_phy->attached_dev_type != EDGE_DEV &&
+	    ex_phy->attached_dev_type != SATA_PENDING) {
 		SAS_DPRINTK("unknown device type(0x%x) attached to ex %016llx "
 			    "phy 0x%x\n", ex_phy->attached_dev_type,
 			    SAS_ADDR(dev->sas_addr),
@@ -982,6 +968,7 @@ static int sas_ex_discover_dev(struct domain_device *dev, int phy_id)
 
 	switch (ex_phy->attached_dev_type) {
 	case SAS_END_DEV:
+	case SATA_PENDING:
 		child = sas_ex_discover_end_dev(dev, phy_id);
 		break;
 	case FANOUT_DEV:
@@ -1658,8 +1645,8 @@ static int sas_get_phy_change_count(struct domain_device *dev,
 	return res;
 }
 
-int sas_get_phy_attached_sas_addr(struct domain_device *dev, int phy_id,
-				  u8 *attached_sas_addr)
+static int sas_get_phy_attached_sas_addr(struct domain_device *dev, int phy_id,
+					 u8 *attached_sas_addr)
 {
 	int res;
 	struct smp_resp *disc_resp;
diff --git a/drivers/scsi/libsas/sas_internal.h b/drivers/scsi/libsas/sas_internal.h
index 4157f6e..a37a5bd 100644
--- a/drivers/scsi/libsas/sas_internal.h
+++ b/drivers/scsi/libsas/sas_internal.h
@@ -90,8 +90,9 @@ int sas_smp_get_phy_events(struct sas_phy *phy);
 void sas_device_set_phy(struct domain_device *dev, struct sas_port *port);
 struct domain_device *sas_find_dev_by_rphy(struct sas_rphy *rphy);
 struct domain_device *sas_ex_to_ata(struct domain_device *ex_dev, int phy_id);
-int sas_get_phy_attached_sas_addr(struct domain_device *dev, int phy_id,
-				  u8 *attached_sas_addr);
+int sas_ex_phy_discover(struct domain_device *dev, int single);
+int sas_get_report_phy_sata(struct domain_device *dev, int phy_id,
+			    struct smp_resp *rps_resp);
 int sas_try_ata_reset(struct asd_sas_phy *phy);
 void sas_hae_reset(struct work_struct *work);
 
@@ -121,6 +122,7 @@ static inline void sas_fill_in_rphy(struct domain_device *dev,
 	case SATA_DEV:
 		/* FIXME: need sata device type */
 	case SAS_END_DEV:
+	case SATA_PENDING:
 		rphy->identify.device_type = SAS_END_DEVICE;
 		break;
 	case EDGE_DEV:
diff --git a/include/scsi/sas.h b/include/scsi/sas.h
index 3673d68..a577a83 100644
--- a/include/scsi/sas.h
+++ b/include/scsi/sas.h
@@ -89,8 +89,7 @@ enum sas_oob_mode {
 	SAS_OOB_MODE
 };
 
-/* See sas_discover.c if you plan on changing these.
- */
+/* See sas_discover.c if you plan on changing these */
 enum sas_dev_type {
 	NO_DEVICE   = 0,	  /* protocol */
 	SAS_END_DEV = 1,	  /* protocol */
@@ -100,6 +99,7 @@ enum sas_dev_type {
 	SATA_DEV    = 5,
 	SATA_PM     = 7,
 	SATA_PM_PORT= 8,
+	SATA_PENDING  = 9,
 };
 
 enum sas_protocol {
diff --git a/include/scsi/sas_ata.h b/include/scsi/sas_ata.h
index cb724fd..0ca2f8a 100644
--- a/include/scsi/sas_ata.h
+++ b/include/scsi/sas_ata.h
@@ -33,9 +33,10 @@
 static inline int dev_is_sata(struct domain_device *dev)
 {
 	return dev->dev_type == SATA_DEV || dev->dev_type == SATA_PM ||
-	       dev->dev_type == SATA_PM_PORT;
+	       dev->dev_type == SATA_PM_PORT || dev->dev_type == SATA_PENDING;
 }
 
+int sas_get_ata_info(struct domain_device *dev, struct ex_phy *phy);
 int sas_ata_init_host_and_port(struct domain_device *found_dev,
 			       struct scsi_target *starget);
 
@@ -82,6 +83,11 @@ static inline void sas_ata_schedule_reset(struct domain_device *dev)
 static inline void sas_ata_wait_eh(struct domain_device *dev)
 {
 }
+
+static inline int sas_get_ata_info(struct domain_device *dev, struct ex_phy *phy)
+{
+	return 0;
+}
 #endif
 
 #endif /* _SAS_ATA_H_ */