Patchwork [v6,02/10] hw/arm_boot.c: Make SMP boards specify address to poll in bootup loop

login
register
mail settings
Submitter Evgeny Voevodin
Date Jan. 12, 2012, 8:34 a.m.
Message ID <1326357257-14177-3-git-send-email-e.voevodin@samsung.com>
Download mbox | patch
Permalink /patch/135591/
State New
Headers show

Comments

Evgeny Voevodin - Jan. 12, 2012, 8:34 a.m.
The secondary CPU bootloader in arm_boot.c holds secondary CPUs in a
pen until the primary CPU releases them. Make boards specify the
address to be polled to determine whether to leave the pen (it was
previously hardcoded to 0x10000030, which is a Versatile Express/
Realview specific system register address).

Signed-off-by: Evgeny Voevodin <e.voevodin@samsung.com>
---
 hw/arm-misc.h |    1 +
 hw/arm_boot.c |   18 ++++++++++--------
 hw/realview.c |    2 ++
 hw/vexpress.c |    2 ++
 4 files changed, 15 insertions(+), 8 deletions(-)

Patch

diff --git a/hw/arm-misc.h b/hw/arm-misc.h
index af403a1..6e8ae6b 100644
--- a/hw/arm-misc.h
+++ b/hw/arm-misc.h
@@ -31,6 +31,7 @@  struct arm_boot_info {
     const char *initrd_filename;
     target_phys_addr_t loader_start;
     target_phys_addr_t smp_loader_start;
+    target_phys_addr_t smp_bootreg_addr;
     target_phys_addr_t smp_priv_base;
     int nb_cpus;
     int board_id;
diff --git a/hw/arm_boot.c b/hw/arm_boot.c
index 215d5de..bf509a8 100644
--- a/hw/arm_boot.c
+++ b/hw/arm_boot.c
@@ -31,17 +31,17 @@  static uint32_t bootloader[] = {
 /* Entry point for secondary CPUs.  Enable interrupt controller and
    Issue WFI until start address is written to system controller.  */
 static uint32_t smpboot[] = {
-  0xe59f0020, /* ldr     r0, privbase */
-  0xe3a01001, /* mov     r1, #1 */
-  0xe5801100, /* str     r1, [r0, #0x100] */
-  0xe3a00201, /* mov     r0, #0x10000000 */
-  0xe3800030, /* orr     r0, #0x30 */
+  0xe59f201c, /* ldr r2, privbase */
+  0xe59f001c, /* ldr r0, startaddr */
+  0xe3a01001, /* mov r1, #1 */
+  0xe5821100, /* str r1, [r2, #256] */
   0xe320f003, /* wfi */
   0xe5901000, /* ldr     r1, [r0] */
   0xe1110001, /* tst     r1, r1 */
   0x0afffffb, /* beq     <wfi> */
   0xe12fff11, /* bx      r1 */
-  0 /* privbase: Private memory region base address.  */
+  0,          /* privbase: Private memory region base address.  */
+  0           /* bootreg: Boot register address is held here */
 };
 
 #define WRITE_WORD(p, value) do { \
@@ -197,6 +197,7 @@  static void do_cpu_reset(void *opaque)
                                     info->loader_start);
                 }
             } else {
+                stl_phys_notdirty(info->smp_bootreg_addr, 0);
                 env->regs[15] = info->smp_loader_start;
             }
         }
@@ -272,8 +273,9 @@  void arm_load_kernel(CPUState *env, struct arm_boot_info *info)
         rom_add_blob_fixed("bootloader", bootloader, sizeof(bootloader),
                            info->loader_start);
         if (info->nb_cpus > 1) {
-            smpboot[10] = info->smp_priv_base;
-            for (n = 0; n < sizeof(smpboot) / 4; n++) {
+            smpboot[ARRAY_SIZE(smpboot) - 1] = info->smp_bootreg_addr;
+            smpboot[ARRAY_SIZE(smpboot) - 2] = info->smp_priv_base;
+            for (n = 0; n < ARRAY_SIZE(smpboot); n++) {
                 smpboot[n] = tswap32(smpboot[n]);
             }
             rom_add_blob_fixed("smpboot", smpboot, sizeof(smpboot),
diff --git a/hw/realview.c b/hw/realview.c
index d4191e9..3f35118 100644
--- a/hw/realview.c
+++ b/hw/realview.c
@@ -21,6 +21,7 @@ 
 #include "exec-memory.h"
 
 #define SMP_BOOT_ADDR 0xe0000000
+#define SMP_BOOTREG_ADDR 0x10000030
 
 typedef struct {
     SysBusDevice busdev;
@@ -96,6 +97,7 @@  static void realview_register_devices(void)
 
 static struct arm_boot_info realview_binfo = {
     .smp_loader_start = SMP_BOOT_ADDR,
+    .smp_bootreg_addr = SMP_BOOTREG_ADDR,
 };
 
 /* The following two lists must be consistent.  */
diff --git a/hw/vexpress.c b/hw/vexpress.c
index c9ca43c..abdca14 100644
--- a/hw/vexpress.c
+++ b/hw/vexpress.c
@@ -28,11 +28,13 @@ 
 #include "exec-memory.h"
 
 #define SMP_BOOT_ADDR 0xe0000000
+#define SMP_BOOTREG_ADDR 0x10000030
 
 #define VEXPRESS_BOARD_ID 0x8e0
 
 static struct arm_boot_info vexpress_binfo = {
     .smp_loader_start = SMP_BOOT_ADDR,
+    .smp_bootreg_addr = SMP_BOOTREG_ADDR,
 };
 
 static void vexpress_a9_init(ram_addr_t ram_size,