diff mbox

[net-next,1/6] tg3: Enable EEE support for capable 10/100 devs

Message ID 1323897002-17295-2-git-send-email-mcarlson@broadcom.com
State Accepted, archived
Delegated to: David Miller
Headers show

Commit Message

Matt Carlson Dec. 14, 2011, 9:09 p.m. UTC 
There are some devices in the 57765 ASIC rev that are EEE capable.
Unfortunately the EEE setup code only gets executed if the device is
gigabit capable.  This patch fixes the problem.

Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Reviewed-by: Michael Chan <mchan@broadcom.com>
Reviewed-by: Benjamin Li <benli@broadcom.com>
---
 drivers/net/ethernet/broadcom/tg3.c |   19 +++++++++----------
 1 files changed, 9 insertions(+), 10 deletions(-)
diff mbox

Patch

diff --git a/drivers/net/ethernet/broadcom/tg3.c b/drivers/net/ethernet/broadcom/tg3.c
index 1979151..8a6ea19 100644
--- a/drivers/net/ethernet/broadcom/tg3.c
+++ b/drivers/net/ethernet/broadcom/tg3.c
@@ -3595,18 +3595,17 @@  static int tg3_phy_autoneg_cfg(struct tg3 *tp, u32 advertise, u32 flowctrl)
 	if (err)
 		goto done;
 
-	if (tp->phy_flags & TG3_PHYFLG_10_100_ONLY)
-		goto done;
-
-	new_adv = ethtool_adv_to_mii_ctrl1000_t(advertise);
+	if (!(tp->phy_flags & TG3_PHYFLG_10_100_ONLY)) {
+		new_adv = ethtool_adv_to_mii_ctrl1000_t(advertise);
 
-	if (tp->pci_chip_rev_id == CHIPREV_ID_5701_A0 ||
-	    tp->pci_chip_rev_id == CHIPREV_ID_5701_B0)
-		new_adv |= CTL1000_AS_MASTER | CTL1000_ENABLE_MASTER;
+		if (tp->pci_chip_rev_id == CHIPREV_ID_5701_A0 ||
+		    tp->pci_chip_rev_id == CHIPREV_ID_5701_B0)
+			new_adv |= CTL1000_AS_MASTER | CTL1000_ENABLE_MASTER;
 
-	err = tg3_writephy(tp, MII_CTRL1000, new_adv);
-	if (err)
-		goto done;
+		err = tg3_writephy(tp, MII_CTRL1000, new_adv);
+		if (err)
+			goto done;
+	}
 
 	if (!(tp->phy_flags & TG3_PHYFLG_EEE_CAP))
 		goto done;