diff mbox

[V3,4/4] arm/imx6q-sabrelite: add enet phy ksz9021rn fixup

Message ID 1323826007-17937-5-git-send-email-richard.zhao@linaro.org
State New
Headers show

Commit Message

Richard Zhao Dec. 14, 2011, 1:26 a.m. UTC 
The default phy RGMII pad settings can not work, tune pad skew.

Signed-off-by: Richard Zhao <richard.zhao@linaro.org>
---
 arch/arm/mach-imx/mach-imx6q.c |   21 +++++++++++++++++++++
 1 files changed, 21 insertions(+), 0 deletions(-)

Comments

Shawn Guo Dec. 14, 2011, 6:25 a.m. UTC | #1 
On Wed, Dec 14, 2011 at 09:26:47AM +0800, Richard Zhao wrote:
> The default phy RGMII pad settings can not work, tune pad skew.
> 
> Signed-off-by: Richard Zhao <richard.zhao@linaro.org>
> ---
>  arch/arm/mach-imx/mach-imx6q.c |   21 +++++++++++++++++++++
>  1 files changed, 21 insertions(+), 0 deletions(-)

Applied, thanks.
diff mbox

Patch

diff --git a/arch/arm/mach-imx/mach-imx6q.c b/arch/arm/mach-imx/mach-imx6q.c
index d24d6c4..b3dcdcb 100644
--- a/arch/arm/mach-imx/mach-imx6q.c
+++ b/arch/arm/mach-imx/mach-imx6q.c
@@ -16,6 +16,8 @@ 
 #include <linux/of.h>
 #include <linux/of_irq.h>
 #include <linux/of_platform.h>
+#include <linux/phy.h>
+#include <linux/micrel_phy.h>
 #include <asm/hardware/cache-l2x0.h>
 #include <asm/hardware/gic.h>
 #include <asm/mach/arch.h>
@@ -23,8 +25,27 @@ 
 #include <mach/common.h>
 #include <mach/hardware.h>
 
+/* For imx6q sabrelite board: set KSZ9021RN RGMII pad skew */
+static int ksz9021rn_phy_fixup(struct phy_device *phydev)
+{
+	/* min rx data delay */
+	phy_write(phydev, 0x0b, 0x8105);
+	phy_write(phydev, 0x0c, 0x0000);
+
+	/* max rx/tx clock delay, min rx/tx control delay */
+	phy_write(phydev, 0x0b, 0x8104);
+	phy_write(phydev, 0x0c, 0xf0f0);
+	phy_write(phydev, 0x0b, 0x104);
+
+	return 0;
+}
+
 static void __init imx6q_init_machine(void)
 {
+	if (of_machine_is_compatible("fsl,imx6q-sabrelite"))
+		phy_register_fixup_for_uid(PHY_ID_KSZ9021, MICREL_PHY_ID_MASK,
+					 ksz9021rn_phy_fixup);
+
 	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
 
 	imx6q_pm_init();