Patchwork [3/4] mtd: fix compile error for gpmi-nand

login
register
mail settings
Submitter Shawn Guo
Date Dec. 13, 2011, 3:48 p.m.
Message ID <1323791286-29574-4-git-send-email-shawn.guo@linaro.org>
Download mbox | patch
Permalink /patch/131121/
State New
Headers show

Comments

Shawn Guo - Dec. 13, 2011, 3:48 p.m.
From: Huang Shijie <b32955@freescale.com>

The driver gpmi-nand should compile at least.  This patch adds the
missing gpmi-nand.h to fix the compile error below.

  CC      drivers/mtd/nand/gpmi-nand/gpmi-nand.o
  CC      drivers/mtd/nand/gpmi-nand/gpmi-lib.o
drivers/mtd/nand/gpmi-nand/gpmi-nand.c:25:33: fatal error: linux/mtd/gpmi-nand.h: No such file or directory
drivers/mtd/nand/gpmi-nand/gpmi-lib.c:21:33: fatal error: linux/mtd/gpmi-nand.h: No such file or directory

This header is grabbed from patch below, which has not been postponed
for merging.

  [PATCH v8 1/4] ARM: mxs: add GPMI-NAND support for imx23/imx28
  http://permalink.gmane.org/gmane.linux.drivers.mtd/37338

Signed-off-by: Huang Shijie <b32955@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
---
 include/linux/mtd/gpmi-nand.h |   68 +++++++++++++++++++++++++++++++++++++++++
 1 files changed, 68 insertions(+), 0 deletions(-)
 create mode 100644 include/linux/mtd/gpmi-nand.h
Huang Shijie - Dec. 14, 2011, 2:21 a.m.
于 2011年12月13日 23:48, Shawn Guo 写道:
> From: Huang Shijie <b32955@freescale.com>
>
> The driver gpmi-nand should compile at least.  This patch adds the
> missing gpmi-nand.h to fix the compile error below.
>
>   CC      drivers/mtd/nand/gpmi-nand/gpmi-nand.o
>   CC      drivers/mtd/nand/gpmi-nand/gpmi-lib.o
> drivers/mtd/nand/gpmi-nand/gpmi-nand.c:25:33: fatal error: linux/mtd/gpmi-nand.h: No such file or directory
> drivers/mtd/nand/gpmi-nand/gpmi-lib.c:21:33: fatal error: linux/mtd/gpmi-nand.h: No such file or directory
>
> This header is grabbed from patch below, which has not been postponed
> for merging.
>
>   [PATCH v8 1/4] ARM: mxs: add GPMI-NAND support for imx23/imx28
>   http://permalink.gmane.org/gmane.linux.drivers.mtd/37338
>
> Signed-off-by: Huang Shijie <b32955@freescale.com>
> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
> ---
>  include/linux/mtd/gpmi-nand.h |   68 +++++++++++++++++++++++++++++++++++++++++
>  1 files changed, 68 insertions(+), 0 deletions(-)
>  create mode 100644 include/linux/mtd/gpmi-nand.h
>
> diff --git a/include/linux/mtd/gpmi-nand.h b/include/linux/mtd/gpmi-nand.h
> new file mode 100644
> index 0000000..69b6dbf
> --- /dev/null
> +++ b/include/linux/mtd/gpmi-nand.h
> @@ -0,0 +1,68 @@
> +/*
> + * Copyright (C) 2011 Freescale Semiconductor, Inc. All Rights Reserved.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License along
> + * with this program; if not, write to the Free Software Foundation, Inc.,
> + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
> + */
> +
> +#ifndef __MACH_MXS_GPMI_NAND_H__
> +#define __MACH_MXS_GPMI_NAND_H__
> +
> +/* The size of the resources is fixed. */
> +#define GPMI_NAND_RES_SIZE	6
> +
> +/* Resource names for the GPMI NAND driver. */
> +#define GPMI_NAND_GPMI_REGS_ADDR_RES_NAME  "GPMI NAND GPMI Registers"
> +#define GPMI_NAND_GPMI_INTERRUPT_RES_NAME  "GPMI NAND GPMI Interrupt"
> +#define GPMI_NAND_BCH_REGS_ADDR_RES_NAME   "GPMI NAND BCH Registers"
> +#define GPMI_NAND_BCH_INTERRUPT_RES_NAME   "GPMI NAND BCH Interrupt"
> +#define GPMI_NAND_DMA_CHANNELS_RES_NAME    "GPMI NAND DMA Channels"
> +#define GPMI_NAND_DMA_INTERRUPT_RES_NAME   "GPMI NAND DMA Interrupt"
> +
> +/**
> + * struct gpmi_nand_platform_data - GPMI NAND driver platform data.
> + *
> + * This structure communicates platform-specific information to the GPMI NAND
> + * driver that can't be expressed as resources.
> + *
> + * @platform_init:           A pointer to a function the driver will call to
> + *                           initialize the platform (e.g., set up the pin mux).
> + * @min_prop_delay_in_ns:    Minimum propagation delay of GPMI signals to and
> + *                           from the NAND Flash device, in nanoseconds.
> + * @max_prop_delay_in_ns:    Maximum propagation delay of GPMI signals to and
> + *                           from the NAND Flash device, in nanoseconds.
> + * @max_chip_count:          The maximum number of chips for which the driver
> + *                           should configure the hardware. This value most
> + *                           likely reflects the number of pins that are
> + *                           connected to a NAND Flash device. If this is
> + *                           greater than the SoC hardware can support, the
> + *                           driver will print a message and fail to initialize.
> + * @partitions:              An optional pointer to an array of partition
> + *                           descriptions.
> + * @partition_count:         The number of elements in the partitions array.
> + */
> +struct gpmi_nand_platform_data {
> +	/* SoC hardware information. */
> +	int		(*platform_init)(void);
> +
> +	/* NAND Flash information. */
> +	unsigned int	min_prop_delay_in_ns;
> +	unsigned int	max_prop_delay_in_ns;
> +	unsigned int	max_chip_count;
> +
> +	/* Medium information. */
> +	struct		mtd_partition *partitions;
> +	unsigned	partition_count;
> +};
> +#endif
thanks a lot.

Huang Shijie

Patch

diff --git a/include/linux/mtd/gpmi-nand.h b/include/linux/mtd/gpmi-nand.h
new file mode 100644
index 0000000..69b6dbf
--- /dev/null
+++ b/include/linux/mtd/gpmi-nand.h
@@ -0,0 +1,68 @@ 
+/*
+ * Copyright (C) 2011 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+
+#ifndef __MACH_MXS_GPMI_NAND_H__
+#define __MACH_MXS_GPMI_NAND_H__
+
+/* The size of the resources is fixed. */
+#define GPMI_NAND_RES_SIZE	6
+
+/* Resource names for the GPMI NAND driver. */
+#define GPMI_NAND_GPMI_REGS_ADDR_RES_NAME  "GPMI NAND GPMI Registers"
+#define GPMI_NAND_GPMI_INTERRUPT_RES_NAME  "GPMI NAND GPMI Interrupt"
+#define GPMI_NAND_BCH_REGS_ADDR_RES_NAME   "GPMI NAND BCH Registers"
+#define GPMI_NAND_BCH_INTERRUPT_RES_NAME   "GPMI NAND BCH Interrupt"
+#define GPMI_NAND_DMA_CHANNELS_RES_NAME    "GPMI NAND DMA Channels"
+#define GPMI_NAND_DMA_INTERRUPT_RES_NAME   "GPMI NAND DMA Interrupt"
+
+/**
+ * struct gpmi_nand_platform_data - GPMI NAND driver platform data.
+ *
+ * This structure communicates platform-specific information to the GPMI NAND
+ * driver that can't be expressed as resources.
+ *
+ * @platform_init:           A pointer to a function the driver will call to
+ *                           initialize the platform (e.g., set up the pin mux).
+ * @min_prop_delay_in_ns:    Minimum propagation delay of GPMI signals to and
+ *                           from the NAND Flash device, in nanoseconds.
+ * @max_prop_delay_in_ns:    Maximum propagation delay of GPMI signals to and
+ *                           from the NAND Flash device, in nanoseconds.
+ * @max_chip_count:          The maximum number of chips for which the driver
+ *                           should configure the hardware. This value most
+ *                           likely reflects the number of pins that are
+ *                           connected to a NAND Flash device. If this is
+ *                           greater than the SoC hardware can support, the
+ *                           driver will print a message and fail to initialize.
+ * @partitions:              An optional pointer to an array of partition
+ *                           descriptions.
+ * @partition_count:         The number of elements in the partitions array.
+ */
+struct gpmi_nand_platform_data {
+	/* SoC hardware information. */
+	int		(*platform_init)(void);
+
+	/* NAND Flash information. */
+	unsigned int	min_prop_delay_in_ns;
+	unsigned int	max_prop_delay_in_ns;
+	unsigned int	max_chip_count;
+
+	/* Medium information. */
+	struct		mtd_partition *partitions;
+	unsigned	partition_count;
+};
+#endif