| Message ID | 1323082493-22617-1-git-send-email-Shengzhou.Liu@freescale.com (mailing list archive) |
|---|---|
| State | Not Applicable |
| Headers | show |
On 12/05/2011 04:54 AM, Shengzhou Liu wrote: > There was a bug for fmr initialization, which lead to fmr was always 0x100 > in fsl_elbc_chip_init() and caused FCM command timeout before calling > fsl_elbc_chip_init_tail(). > > Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com> > --- > drivers/mtd/nand/fsl_elbc_nand.c | 8 +++----- > 1 files changed, 3 insertions(+), 5 deletions(-) > > diff --git a/drivers/mtd/nand/fsl_elbc_nand.c b/drivers/mtd/nand/fsl_elbc_nand.c > index eedd8ee..742bf73 100644 > --- a/drivers/mtd/nand/fsl_elbc_nand.c > +++ b/drivers/mtd/nand/fsl_elbc_nand.c > @@ -659,9 +659,7 @@ static int fsl_elbc_chip_init_tail(struct mtd_info *mtd) > if (chip->pagemask & 0xff000000) > al++; > > - /* add to ECCM mode set in fsl_elbc_init */ > - priv->fmr |= (12 << FMR_CWTO_SHIFT) | /* Timeout > 12 ms */ > - (al << FMR_AL_SHIFT); > + priv->fmr |= al << FMR_AL_SHIFT; > > dev_dbg(priv->dev, "fsl_elbc_init: nand->numchips = %d\n", > chip->numchips); > @@ -764,8 +762,8 @@ static int fsl_elbc_chip_init(struct fsl_elbc_mtd *priv) > priv->mtd.priv = chip; > priv->mtd.owner = THIS_MODULE; > > - /* Set the ECCM according to the settings in bootloader.*/ > - priv->fmr = in_be32(&lbc->fmr) & FMR_ECCM; > + /* Set fmr according to the settings in bootloader.*/ > + priv->fmr = in_be32(&lbc->fmr); > > /* fill in nand_chip structure */ > /* set up function call table */ We shouldn't be relying on the bootloader to provide a sane value here -- the bootloader may not have used/initialized NAND at all. It's sort of OK for ECCM, since unless you're trying to match an externally programmed flash, or the bootloader uses the flash, all we really care about is that the value stay consistent. The timeout, OTOH, must not be set too low or things won't work. We should just set a value that we believe to be high enough for all uses. -Scott
diff --git a/drivers/mtd/nand/fsl_elbc_nand.c b/drivers/mtd/nand/fsl_elbc_nand.c index eedd8ee..742bf73 100644 --- a/drivers/mtd/nand/fsl_elbc_nand.c +++ b/drivers/mtd/nand/fsl_elbc_nand.c @@ -659,9 +659,7 @@ static int fsl_elbc_chip_init_tail(struct mtd_info *mtd) if (chip->pagemask & 0xff000000) al++; - /* add to ECCM mode set in fsl_elbc_init */ - priv->fmr |= (12 << FMR_CWTO_SHIFT) | /* Timeout > 12 ms */ - (al << FMR_AL_SHIFT); + priv->fmr |= al << FMR_AL_SHIFT; dev_dbg(priv->dev, "fsl_elbc_init: nand->numchips = %d\n", chip->numchips); @@ -764,8 +762,8 @@ static int fsl_elbc_chip_init(struct fsl_elbc_mtd *priv) priv->mtd.priv = chip; priv->mtd.owner = THIS_MODULE; - /* Set the ECCM according to the settings in bootloader.*/ - priv->fmr = in_be32(&lbc->fmr) & FMR_ECCM; + /* Set fmr according to the settings in bootloader.*/ + priv->fmr = in_be32(&lbc->fmr); /* fill in nand_chip structure */ /* set up function call table */
There was a bug for fmr initialization, which lead to fmr was always 0x100 in fsl_elbc_chip_init() and caused FCM command timeout before calling fsl_elbc_chip_init_tail(). Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com> --- drivers/mtd/nand/fsl_elbc_nand.c | 8 +++----- 1 files changed, 3 insertions(+), 5 deletions(-)