Message ID | 20111122230541.f2f96c9e.shimoda.hiroaki@gmail.com |
---|---|
State | Accepted, archived |
Delegated to: | David Miller |
Headers | show |
From: Hiroaki SHIMODA <shimoda.hiroaki@gmail.com> Date: Tue, 22 Nov 2011 23:05:41 +0900 > Commit 28011cf19b (net: Add ethtool to mii advertisment conversion > helpers) added a helper function ethtool_adv_to_mii_100bt() and > tg3_copper_is_advertising_all(), tg3_phy_autoneg_cfg() were > modified to use this. > Before that commit, ethtool to mii advertisement conversion was > done wrt speed, but now pause operation is also taken account. > So, in tg3_copper_is_advertising_all(), below condition becomes > true and this makes link up fails. > > if ((adv_reg & ADVERTISE_ALL) != all_mask) > return 0; > > To fix this add ADVERTISE_ALL bit and operation to cap speed, > and change default advertisement not including ADVERTISED_Pause. > > Reported-by: Eric Dumazet <eric.dumazet@gmail.com> > Signed-off-by: Hiroaki SHIMODA <shimoda.hiroaki@gmail.com> > --- > V2: change default advertisement not including ADVERTISED_Pause I'll apply this, thank you. -- To unsubscribe from this list: send the line "unsubscribe netdev" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/drivers/net/ethernet/broadcom/tg3.c b/drivers/net/ethernet/broadcom/tg3.c index d9e9c8c..ff3c48a 100644 --- a/drivers/net/ethernet/broadcom/tg3.c +++ b/drivers/net/ethernet/broadcom/tg3.c @@ -3594,7 +3594,7 @@ static int tg3_phy_autoneg_cfg(struct tg3 *tp, u32 advertise, u32 flowctrl) u32 val, new_adv; new_adv = ADVERTISE_CSMA; - new_adv |= ethtool_adv_to_mii_adv_t(advertise); + new_adv |= ethtool_adv_to_mii_adv_t(advertise) & ADVERTISE_ALL; new_adv |= tg3_advert_flowctrl_1000T(flowctrl); err = tg3_writephy(tp, MII_ADVERTISE, new_adv); @@ -3778,7 +3778,7 @@ static int tg3_copper_is_advertising_all(struct tg3 *tp, u32 mask) { u32 adv_reg, all_mask = 0; - all_mask = ethtool_adv_to_mii_adv_t(mask); + all_mask = ethtool_adv_to_mii_adv_t(mask) & ADVERTISE_ALL; if (tg3_readphy(tp, MII_ADVERTISE, &adv_reg)) return 0; @@ -13199,8 +13199,7 @@ static u32 __devinit tg3_read_otp_phycfg(struct tg3 *tp) static void __devinit tg3_phy_init_link_config(struct tg3 *tp) { - u32 adv = ADVERTISED_Autoneg | - ADVERTISED_Pause; + u32 adv = ADVERTISED_Autoneg; if (!(tp->phy_flags & TG3_PHYFLG_10_100_ONLY)) adv |= ADVERTISED_1000baseT_Half |
Commit 28011cf19b (net: Add ethtool to mii advertisment conversion helpers) added a helper function ethtool_adv_to_mii_100bt() and tg3_copper_is_advertising_all(), tg3_phy_autoneg_cfg() were modified to use this. Before that commit, ethtool to mii advertisement conversion was done wrt speed, but now pause operation is also taken account. So, in tg3_copper_is_advertising_all(), below condition becomes true and this makes link up fails. if ((adv_reg & ADVERTISE_ALL) != all_mask) return 0; To fix this add ADVERTISE_ALL bit and operation to cap speed, and change default advertisement not including ADVERTISED_Pause. Reported-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Hiroaki SHIMODA <shimoda.hiroaki@gmail.com> --- V2: change default advertisement not including ADVERTISED_Pause drivers/net/ethernet/broadcom/tg3.c | 7 +++---- 1 files changed, 3 insertions(+), 4 deletions(-) -- To unsubscribe from this list: send the line "unsubscribe netdev" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html