Patchwork [U-Boot] PXA: Drop CERF250 board

login
register
mail settings
Submitter Marek Vasut
Date Nov. 20, 2011, 4:20 a.m.
Message ID <1321762809-18480-1-git-send-email-marek.vasut@gmail.com>
Download mbox | patch
Permalink /patch/126639/
State Changes Requested
Delegated to: Marek Vasut
Headers show

Comments

Marek Vasut - Nov. 20, 2011, 4:20 a.m.
Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Cc: Simon Glass <sjg@chromium.org>
Cc: Anatolij Gustschin <agust@denx.de>
Cc: Prakash Kumar <prakash@embedx.com>
---
 MAINTAINERS               |    4 -
 board/cerf250/Makefile    |   43 -----
 board/cerf250/cerf250.c   |   85 ---------
 board/cerf250/flash.c     |  429 ---------------------------------------------
 boards.cfg                |    1 -
 include/configs/cerf250.h |  229 ------------------------
 6 files changed, 0 insertions(+), 791 deletions(-)
 delete mode 100644 board/cerf250/Makefile
 delete mode 100644 board/cerf250/cerf250.c
 delete mode 100644 board/cerf250/flash.c
 delete mode 100644 include/configs/cerf250.h
Simon Glass - Nov. 20, 2011, 4:56 a.m.
On Sat, Nov 19, 2011 at 8:20 PM, Marek Vasut <marek.vasut@gmail.com> wrote:
> Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
> Cc: Simon Glass <sjg@chromium.org>
> Cc: Anatolij Gustschin <agust@denx.de>
> Cc: Prakash Kumar <prakash@embedx.com>

+jtassitano@embedx.com who may wish to update the maintainer?

> ---
>  MAINTAINERS               |    4 -
>  board/cerf250/Makefile    |   43 -----
>  board/cerf250/cerf250.c   |   85 ---------
>  board/cerf250/flash.c     |  429 ---------------------------------------------
>  boards.cfg                |    1 -
>  include/configs/cerf250.h |  229 ------------------------
>  6 files changed, 0 insertions(+), 791 deletions(-)
>  delete mode 100644 board/cerf250/Makefile
>  delete mode 100644 board/cerf250/cerf250.c
>  delete mode 100644 board/cerf250/flash.c
>  delete mode 100644 include/configs/cerf250.h
>
Mike Frysinger - Nov. 20, 2011, 5:24 a.m.
no changelog as to why it's being dropped ?
-mike
Marek Vasut - Nov. 20, 2011, 8:41 a.m.
> no changelog as to why it's being dropped ?
> -mike

Nope. It's unmaintained ... let's see if the author will speak to us or not.
Mike Frysinger - Nov. 20, 2011, 7:19 p.m.
On Sunday 20 November 2011 03:41:49 Marek Vasut wrote:
> > no changelog as to why it's being dropped ?
> 
> Nope. It's unmaintained ... let's see if the author will speak to us or
> not.

does it fail to build ?  is it missing some critical update ?

a board that builds fine and probably works generally isn't considered from 
removal just because no commits have been made to it in a long time ...
-mike
Marek Vasut - Nov. 21, 2011, 6:09 a.m.
> On Sunday 20 November 2011 03:41:49 Marek Vasut wrote:
> > > no changelog as to why it's being dropped ?
> > 
> > Nope. It's unmaintained ... let's see if the author will speak to us or
> > not.
> 
> does it fail to build ?  is it missing some critical update ?
> 
> a board that builds fine and probably works generally isn't considered from
> removal just because no commits have been made to it in a long time ...
> -mike

It doesn't build, exactly. There was this machine-ID change and noone cares. 
Let's see what the author will tell us. If nothing, time to go.

M
Mike Frysinger - Nov. 21, 2011, 6:54 p.m.
On Monday 21 November 2011 01:09:22 Marek Vasut wrote:
> > On Sunday 20 November 2011 03:41:49 Marek Vasut wrote:
> > > > no changelog as to why it's being dropped ?
> > > 
> > > Nope. It's unmaintained ... let's see if the author will speak to us or
> > > not.
> > 
> > does it fail to build ?  is it missing some critical update ?
> > 
> > a board that builds fine and probably works generally isn't considered
> > from removal just because no commits have been made to it in a long time
> 
> It doesn't build, exactly.

you should put that into the changelog ;)
-mike

Patch

diff --git a/MAINTAINERS b/MAINTAINERS
index 61a5336..c21a416 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -710,10 +710,6 @@  Sergey Kubushyn <ksi@koi8.net>
 	SONATA		ARM926EJS
 	SCHMOOGIE	ARM926EJS
 
-Prakash Kumar <prakash@embedx.com>
-
-	cerf250		xscale/pxa
-
 Vipin Kumar <vipin.kumar@st.com>
 
 	spear300	ARM926EJS (spear300 Soc)
diff --git a/board/cerf250/Makefile b/board/cerf250/Makefile
deleted file mode 100644
index cf4742e..0000000
--- a/board/cerf250/Makefile
+++ /dev/null
@@ -1,43 +0,0 @@ 
-#
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB	= $(obj)lib$(BOARD).o
-
-COBJS	:= cerf250.o flash.o
-
-SRCS	:= $(COBJS:.o=.c)
-OBJS	:= $(addprefix $(obj),$(COBJS))
-
-$(LIB):	$(obj).depend $(OBJS)
-	$(call cmd_link_o_target, $(OBJS))
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/board/cerf250/cerf250.c b/board/cerf250/cerf250.c
deleted file mode 100644
index 043afea..0000000
--- a/board/cerf250/cerf250.c
+++ /dev/null
@@ -1,85 +0,0 @@ 
-/*
- * (C) Copyright 2002
- * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net
- *
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <netdev.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/* ------------------------------------------------------------------------- */
-
-
-/*
- * Miscelaneous platform dependent initialisations
- */
-
-int board_init (void)
-{
-	/* We have RAM, disable cache */
-	dcache_disable();
-	icache_disable();
-
-	/* arch number of cerf PXA Board */
-	gd->bd->bi_arch_number = MACH_TYPE_PXA_CERF;
-
-	/* adress of boot parameters */
-	gd->bd->bi_boot_params = 0xa0000100;
-
-	return 0;
-}
-
-int board_late_init(void)
-{
-	setenv("stdout", "serial");
-	setenv("stderr", "serial");
-	return 0;
-}
-
-extern void pxa_dram_init(void);
-int dram_init(void)
-{
-	pxa_dram_init();
-	gd->ram_size = PHYS_SDRAM_1_SIZE;
-	return 0;
-}
-
-void dram_init_banksize(void)
-{
-	gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
-	gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
-}
-
-#ifdef CONFIG_CMD_NET
-int board_eth_init(bd_t *bis)
-{
-	int rc = 0;
-#ifdef CONFIG_SMC91111
-	rc = smc91111_initialize(0, CONFIG_SMC91111_BASE);
-#endif
-	return rc;
-}
-#endif
diff --git a/board/cerf250/flash.c b/board/cerf250/flash.c
deleted file mode 100644
index e1e7807..0000000
--- a/board/cerf250/flash.c
+++ /dev/null
@@ -1,429 +0,0 @@ 
-/*
- * (C) Copyright 2001
- * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net
- *
- * (C) Copyright 2001
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <linux/byteorder/swab.h>
-
-
-flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];	/* info for FLASH chips    */
-
-/* Board support for 1 or 2 flash devices */
-#define FLASH_PORT_WIDTH32
-#undef FLASH_PORT_WIDTH16
-
-#ifdef FLASH_PORT_WIDTH16
-#define FLASH_PORT_WIDTH		ushort
-#define FLASH_PORT_WIDTHV		vu_short
-#define SWAP(x)               __swab16(x)
-#else
-#define FLASH_PORT_WIDTH		ulong
-#define FLASH_PORT_WIDTHV		vu_long
-#define SWAP(x)               __swab32(x)
-#endif
-
-#define FPW	   FLASH_PORT_WIDTH
-#define FPWV   FLASH_PORT_WIDTHV
-
-#define mb() __asm__ __volatile__ ("" : : : "memory")
-
-/*-----------------------------------------------------------------------
- * Functions
- */
-static ulong flash_get_size (FPW *addr, flash_info_t *info);
-static int write_data (flash_info_t *info, ulong dest, FPW data);
-static void flash_get_offsets (ulong base, flash_info_t *info);
-void inline spin_wheel (void);
-
-/*-----------------------------------------------------------------------
- */
-
-unsigned long flash_init (void)
-{
-	int i;
-	ulong size = 0;
-
-	for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) {
-		switch (i) {
-		case 0:
-			flash_get_size ((FPW *) PHYS_FLASH_1, &flash_info[i]);
-			flash_get_offsets (PHYS_FLASH_1, &flash_info[i]);
-			break;
-		case 1:
-			flash_get_size ((FPW *) PHYS_FLASH_2, &flash_info[i]);
-			flash_get_offsets (PHYS_FLASH_2, &flash_info[i]);
-			break;
-		default:
-			panic ("configured too many flash banks!\n");
-			break;
-		}
-		size += flash_info[i].size;
-	}
-
-	/* Protect monitor and environment sectors
-	 */
-	flash_protect ( FLAG_PROTECT_SET,
-			CONFIG_SYS_FLASH_BASE,
-			CONFIG_SYS_FLASH_BASE + monitor_flash_len - 1,
-			&flash_info[0] );
-
-	flash_protect ( FLAG_PROTECT_SET,
-			CONFIG_ENV_ADDR,
-			CONFIG_ENV_ADDR + CONFIG_ENV_SIZE - 1, &flash_info[0] );
-
-	return size;
-}
-
-/*-----------------------------------------------------------------------
- */
-static void flash_get_offsets (ulong base, flash_info_t *info)
-{
-	int i;
-
-	if (info->flash_id == FLASH_UNKNOWN) {
-		return;
-	}
-
-	if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL) {
-		for (i = 0; i < info->sector_count; i++) {
-			info->start[i] = base + (i * PHYS_FLASH_SECT_SIZE);
-			info->protect[i] = 0;
-		}
-	}
-}
-
-/*-----------------------------------------------------------------------
- */
-void flash_print_info (flash_info_t *info)
-{
-	int i;
-
-	if (info->flash_id == FLASH_UNKNOWN) {
-		printf ("missing or unknown FLASH type\n");
-		return;
-	}
-
-	switch (info->flash_id & FLASH_VENDMASK) {
-	case FLASH_MAN_INTEL:
-		printf ("INTEL ");
-		break;
-	default:
-		printf ("Unknown Vendor ");
-		break;
-	}
-
-	switch (info->flash_id & FLASH_TYPEMASK) {
-	case FLASH_28F128J3A:
-		printf ("28F128J3A\n");
-		break;
-	default:
-		printf ("Unknown Chip Type\n");
-		break;
-	}
-
-	printf ("  Size: %ld MB in %d Sectors\n",
-			info->size >> 20, info->sector_count);
-
-	printf ("  Sector Start Addresses:");
-	for (i = 0; i < info->sector_count; ++i) {
-		if ((i % 5) == 0)
-			printf ("\n   ");
-		printf (" %08lX%s",
-			info->start[i],
-			info->protect[i] ? " (RO)" : "     ");
-	}
-	printf ("\n");
-	return;
-}
-
-/*
- * The following code cannot be run from FLASH!
- */
-static ulong flash_get_size (FPW *addr, flash_info_t *info)
-{
-	volatile FPW value;
-
-	/* Write auto select command: read Manufacturer ID */
-	addr[0x5555] = (FPW) 0x00AA00AA;
-	addr[0x2AAA] = (FPW) 0x00550055;
-	addr[0x5555] = (FPW) 0x00900090;
-
-	mb ();
-	value = addr[0];
-
-	switch (value) {
-
-	case (FPW) INTEL_MANUFACT:
-		info->flash_id = FLASH_MAN_INTEL;
-		break;
-
-	default:
-		info->flash_id = FLASH_UNKNOWN;
-		info->sector_count = 0;
-		info->size = 0;
-		addr[0] = (FPW) 0x00FF00FF;	/* restore read mode */
-		return (0);			/* no or unknown flash  */
-	}
-
-	mb ();
-	value = addr[1];			/* device ID        */
-
-	switch (value) {
-
-	case (FPW) INTEL_ID_28F128J3A:
-		info->flash_id += FLASH_28F128J3A;
-		info->sector_count = 128;
-		info->size = 0x02000000;
-		break;				/* => 16 MB     */
-
-	default:
-		info->flash_id = FLASH_UNKNOWN;
-		break;
-	}
-
-	if (info->sector_count > CONFIG_SYS_MAX_FLASH_SECT) {
-		printf ("** ERROR: sector count %d > max (%d) **\n",
-			info->sector_count, CONFIG_SYS_MAX_FLASH_SECT);
-		info->sector_count = CONFIG_SYS_MAX_FLASH_SECT;
-	}
-
-	addr[0] = (FPW) 0x00FF00FF;		/* restore read mode */
-
-	return (info->size);
-}
-
-
-/*-----------------------------------------------------------------------
- */
-
-int flash_erase (flash_info_t *info, int s_first, int s_last)
-{
-	int flag, prot, sect;
-	ulong type, start;
-	int rcode = 0;
-
-	if ((s_first < 0) || (s_first > s_last)) {
-		if (info->flash_id == FLASH_UNKNOWN) {
-			printf ("- missing\n");
-		} else {
-			printf ("- no sectors to erase\n");
-		}
-		return 1;
-	}
-
-	type = (info->flash_id & FLASH_VENDMASK);
-	if ((type != FLASH_MAN_INTEL)) {
-		printf ("Can't erase unknown flash type %08lx - aborted\n",
-			info->flash_id);
-		return 1;
-	}
-
-	prot = 0;
-	for (sect = s_first; sect <= s_last; ++sect) {
-		if (info->protect[sect]) {
-			prot++;
-		}
-	}
-
-	if (prot) {
-		printf ("- Warning: %d protected sectors will not be erased!\n",
-			prot);
-	} else {
-		printf ("\n");
-	}
-
-	/* Disable interrupts which might cause a timeout here */
-	flag = disable_interrupts ();
-
-	/* Start erase on unprotected sectors */
-	for (sect = s_first; sect <= s_last; sect++) {
-		if (info->protect[sect] == 0) {	/* not protected */
-			FPWV *addr = (FPWV *) (info->start[sect]);
-			FPW status;
-
-			printf ("Erasing sector %2d ... ", sect);
-
-			/* arm simple, non interrupt dependent timer */
-			start = get_timer(0);
-
-			*addr = (FPW) 0x00500050;	/* clear status register */
-			*addr = (FPW) 0x00200020;	/* erase setup */
-			*addr = (FPW) 0x00D000D0;	/* erase confirm */
-
-			while (((status = *addr) & (FPW) 0x00800080) != (FPW) 0x00800080) {
-				if (get_timer(start) > CONFIG_SYS_FLASH_ERASE_TOUT) {
-					printf ("Timeout\n");
-					*addr = (FPW) 0x00B000B0;	/* suspend erase     */
-					*addr = (FPW) 0x00FF00FF;	/* reset to read mode */
-					rcode = 1;
-					break;
-				}
-			}
-
-			*addr = 0x00500050;	/* clear status register cmd.   */
-			*addr = 0x00FF00FF;	/* resest to read mode          */
-
-			printf (" done\n");
-		}
-	}
-	return rcode;
-}
-
-/*-----------------------------------------------------------------------
- * Copy memory to flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- * 4 - Flash not identified
- */
-
-int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
-{
-	ulong cp, wp;
-	FPW data;
-	int count, i, l, rc, port_width;
-
-	if (info->flash_id == FLASH_UNKNOWN) {
-		return 4;
-	}
-/* get lower word aligned address */
-#ifdef FLASH_PORT_WIDTH16
-	wp = (addr & ~1);
-	port_width = 2;
-#else
-	wp = (addr & ~3);
-	port_width = 4;
-#endif
-
-	/*
-	 * handle unaligned start bytes
-	 */
-	if ((l = addr - wp) != 0) {
-		data = 0;
-		for (i = 0, cp = wp; i < l; ++i, ++cp) {
-			data = (data << 8) | (*(uchar *) cp);
-		}
-		for (; i < port_width && cnt > 0; ++i) {
-			data = (data << 8) | *src++;
-			--cnt;
-			++cp;
-		}
-		for (; cnt == 0 && i < port_width; ++i, ++cp) {
-			data = (data << 8) | (*(uchar *) cp);
-		}
-
-		if ((rc = write_data (info, wp, SWAP (data))) != 0) {
-			return (rc);
-		}
-		wp += port_width;
-	}
-
-	/*
-	 * handle word aligned part
-	 */
-	count = 0;
-	while (cnt >= port_width) {
-		data = 0;
-		for (i = 0; i < port_width; ++i) {
-			data = (data << 8) | *src++;
-		}
-		if ((rc = write_data (info, wp, SWAP (data))) != 0) {
-			return (rc);
-		}
-		wp += port_width;
-		cnt -= port_width;
-		if (count++ > 0x800) {
-			spin_wheel ();
-			count = 0;
-		}
-	}
-
-	if (cnt == 0) {
-		return (0);
-	}
-
-	/*
-	 * handle unaligned tail bytes
-	 */
-	data = 0;
-	for (i = 0, cp = wp; i < port_width && cnt > 0; ++i, ++cp) {
-		data = (data << 8) | *src++;
-		--cnt;
-	}
-	for (; i < port_width; ++i, ++cp) {
-		data = (data << 8) | (*(uchar *) cp);
-	}
-
-	return (write_data (info, wp, SWAP (data)));
-}
-
-/*-----------------------------------------------------------------------
- * Write a word or halfword to Flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-static int write_data (flash_info_t *info, ulong dest, FPW data)
-{
-	FPWV *addr = (FPWV *) dest;
-	ulong status;
-	int flag;
-	ulong start;
-
-	/* Check if Flash is (sufficiently) erased */
-	if ((*addr & data) != data) {
-		printf ("not erased at %08lx (%lx)\n", (ulong) addr, *addr);
-		return (2);
-	}
-	/* Disable interrupts which might cause a timeout here */
-	flag = disable_interrupts ();
-
-	*addr = (FPW) 0x00400040;	/* write setup */
-	*addr = data;
-
-	/* arm simple, non interrupt dependent timer */
-	start = get_timer(0);
-
-	/* wait while polling the status register */
-	while (((status = *addr) & (FPW) 0x00800080) != (FPW) 0x00800080) {
-		if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
-			*addr = (FPW) 0x00FF00FF;	/* restore read mode */
-			return (1);
-		}
-	}
-
-	*addr = (FPW) 0x00FF00FF;	/* restore read mode */
-
-	return (0);
-}
-
-void inline spin_wheel (void)
-{
-	static int p = 0;
-	static char w[] = "\\/-";
-
-	printf ("\010%c", w[p]);
-	(++p == 3) ? (p = 0) : 0;
-}
diff --git a/boards.cfg b/boards.cfg
index 58bbc62..42b05cd 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -214,7 +214,6 @@  actux3                       arm         ixp
 actux4                       arm         ixp
 dvlhost                      arm         ixp
 balloon3                     arm         pxa
-cerf250                      arm         pxa
 colibri_pxa270               arm         pxa
 cradle                       arm         pxa
 lubbock                      arm         pxa
diff --git a/include/configs/cerf250.h b/include/configs/cerf250.h
deleted file mode 100644
index 70427da..0000000
--- a/include/configs/cerf250.h
+++ /dev/null
@@ -1,229 +0,0 @@ 
-/*
- * (C) Copyright 2002
- * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net
- *
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
- *
- * Configuation settings for the CERF250 board.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-#define CONFIG_PXA250		1	/* This is an PXA250 CPU    */
-#define CONFIG_CERF250		1	/* on Cerf PXA Board	    */
-#define CONFIG_BOARD_LATE_INIT
-#define CONFIG_BAUDRATE		38400
-#define	CONFIG_SYS_TEXT_BASE	0x0
-
-#undef	CONFIG_USE_IRQ			/* we don't need IRQ/FIQ stuff */
-
-/* we will never enable dcache, because we have to setup MMU first */
-#define CONFIG_SYS_DCACHE_OFF
-
-/*
- * Size of malloc() pool
- */
-#define CONFIG_SYS_MALLOC_LEN	    (CONFIG_ENV_SIZE + 128*1024)
-
-/*
- * Hardware drivers
- */
-#define CONFIG_SMC91111
-#define CONFIG_SMC91111_BASE 0x04000300
-#define CONFIG_SMC_USE_32_BIT
-
-/*
- * select serial console configuration
- */
-#define CONFIG_PXA_SERIAL
-#define CONFIG_FFUART	     1	/* we use FFUART on CERF PXA */
-
-/* allow to overwrite serial and ethaddr */
-#define CONFIG_ENV_OVERWRITE
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-
-#define CONFIG_BOOTDELAY	3
-#define CONFIG_ETHADDR		00:D0:CA:F1:3C:D2
-#define CONFIG_NETMASK		255.255.255.0
-#define CONFIG_IPADDR		192.168.0.5
-#define CONFIG_SERVERIP		192.168.0.2
-#define CONFIG_BOOTCOMMAND	"bootm 0xC0000"
-#define CONFIG_BOOTARGS		"root=/dev/mtdblock3 rootfstype=jffs2 console=ttyS0,38400"
-#define CONFIG_CMDLINE_TAG
-
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX	2		/* which serial port to use */
-#endif
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_HUSH_PARSER		1
-#define CONFIG_SYS_PROMPT_HUSH_PS2	"> "
-
-#define CONFIG_SYS_LONGHELP					/* undef to save memory		*/
-#ifdef CONFIG_SYS_HUSH_PARSER
-#define CONFIG_SYS_PROMPT			"uboot$ "	/* Monitor Command Prompt */
-#else
-#define CONFIG_SYS_PROMPT			"=> "		/* Monitor Command Prompt */
-#endif
-#define CONFIG_SYS_CBSIZE			256			/* Console I/O Buffer Size	*/
-#define CONFIG_SYS_PBSIZE			(CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
-										/* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS			16			/* max number of command args	*/
-#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
-#define CONFIG_SYS_DEVICE_NULLDEV	1
-
-#define CONFIG_SYS_MEMTEST_START	0xa0400000	/* memtest works on	*/
-#define CONFIG_SYS_MEMTEST_END		0xa0800000	/* 4 ... 8 MB in DRAM	*/
-
-#define CONFIG_SYS_LOAD_ADDR		0xa2000000	/* default load address */
-
-#define CONFIG_SYS_HZ			1000
-#define CONFIG_SYS_CPUSPEED		0x141		/* set core clock to 400/200/100 MHz */
-
-#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
-
-
-/*
- * Stack sizes
- *
- * The stack sizes are set up in start.S using the settings below
- */
-#define CONFIG_STACKSIZE		(128*1024)	/* regular stack */
-#ifdef CONFIG_USE_IRQ
-#define CONFIG_STACKSIZE_IRQ	(4*1024)	/* IRQ stack */
-#define CONFIG_STACKSIZE_FIQ	(4*1024)	/* FIQ stack */
-#endif
-
-/*
- * Physical Memory Map
- */
-#define CONFIG_NR_DRAM_BANKS		1		/* we have 1 bank of DRAM */
-#define PHYS_SDRAM_1			0xa0000000	/* SDRAM Bank #1 */
-#define PHYS_SDRAM_1_SIZE		0x04000000	/* 64 MB */
-
-#define PHYS_FLASH_1			0x00000000	/* Flash Bank #1 */
-#define PHYS_FLASH_2			0x04000000	/* Flash Bank #2 */
-#define PHYS_FLASH_SIZE			0x02000000	/* 32 MB */
-#define PHYS_FLASH_BANK_SIZE		0x02000000	/* 32 MB Banks */
-#define PHYS_FLASH_SECT_SIZE		0x00040000	/* 256 KB sectors (x2) */
-
-#define CONFIG_SYS_DRAM_BASE			0xa0000000
-#define CONFIG_SYS_DRAM_SIZE			0x04000000
-
-#define CONFIG_SYS_FLASH_BASE			PHYS_FLASH_1
-
-#define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM_1
-#define	CONFIG_SYS_INIT_SP_ADDR		(GENERATED_GBL_DATA_SIZE + PHYS_SDRAM_1)
-
-/*
- * GPIO settings
- */
-
-
-#define CONFIG_SYS_GPSR0_VAL		0x00408030
-#define CONFIG_SYS_GPSR1_VAL		0x00BFA882
-#define CONFIG_SYS_GPSR2_VAL		0x0001C000
-#define CONFIG_SYS_GPCR0_VAL		0xC0031100
-#define CONFIG_SYS_GPCR1_VAL		0xFC400300
-#define CONFIG_SYS_GPCR2_VAL		0x00003FFF
-#define CONFIG_SYS_GPDR0_VAL		0xC0439330
-#define CONFIG_SYS_GPDR1_VAL		0xFCFFAB82
-#define CONFIG_SYS_GPDR2_VAL		0x0001FFFF
-#define CONFIG_SYS_GAFR0_L_VAL		0x80000000
-#define CONFIG_SYS_GAFR0_U_VAL		0xA5000010
-#define CONFIG_SYS_GAFR1_L_VAL		0x60008018
-#define CONFIG_SYS_GAFR1_U_VAL		0xAAA5AAAA
-#define CONFIG_SYS_GAFR2_L_VAL		0xAAA0000A
-#define CONFIG_SYS_GAFR2_U_VAL		0x00000002
-
-#define CONFIG_SYS_PSSR_VAL		0x20
-
-#define	CONFIG_SYS_CCCR			CCCR_L27|CCCR_M2|CCCR_N10
-#define	CONFIG_SYS_CKEN			0x0
-
-/*
- * Memory settings
- */
-#define CONFIG_SYS_MSC0_VAL		0x12447FF0
-#define CONFIG_SYS_MSC1_VAL		0x12BC5554
-#define CONFIG_SYS_MSC2_VAL		0x7FF97FF1
-#define CONFIG_SYS_MDCNFG_VAL		0x00001AC9
-#define CONFIG_SYS_MDREFR_VAL		0x03CDC017
-#define CONFIG_SYS_MDMRS_VAL		0x00000000
-#define	CONFIG_SYS_FLYCNFG_VAL		0x00000000
-#define	CONFIG_SYS_SXCNFG_VAL		0x00000000
-
-/*
- * PCMCIA and CF Interfaces
- */
-#define CONFIG_SYS_MECR_VAL		0x00000000
-#define CONFIG_SYS_MCMEM0_VAL		0x00010504
-#define CONFIG_SYS_MCMEM1_VAL		0x00010504
-#define CONFIG_SYS_MCATT0_VAL		0x00010504
-#define CONFIG_SYS_MCATT1_VAL		0x00010504
-#define CONFIG_SYS_MCIO0_VAL		0x00004715
-#define CONFIG_SYS_MCIO1_VAL		0x00004715
-
-#define _LED			0x08000010	/*check this */
-#define LED_BLANK		0x08000040
-#define LED_GPIO		0x10
-
-/*
- * FLASH and environment organization
- */
-#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
-#define CONFIG_SYS_MAX_FLASH_SECT	128	/* max number of sectors on one chip    */
-
-/* timeout values are in ticks */
-#define CONFIG_SYS_FLASH_ERASE_TOUT	(25*CONFIG_SYS_HZ) /* Timeout for Flash Erase */
-#define CONFIG_SYS_FLASH_WRITE_TOUT	(25*CONFIG_SYS_HZ) /* Timeout for Flash Write */
-
-#define CONFIG_SYS_MONITOR_LEN		0x40000		/* 256 KiB */
-#define CONFIG_ENV_IS_IN_FLASH	1
-#define CONFIG_ENV_ADDR		(PHYS_FLASH_1 + CONFIG_SYS_MONITOR_LEN)
-#define CONFIG_ENV_SIZE		0x40000	/* Total Size of Environment Sector	*/
-
-
-#endif	/* __CONFIG_H */