diff mbox series

[V3,10/14] ARM: dts: stm32: Repair ethernet operation on AV96

Message ID 20200331175136.205020-11-marex@denx.de
State Accepted
Commit 6bb45d08cbce1375925a6babef0fa9c7d905cc23
Delegated to: Patrick Delaunay
Headers show
Series ARM: stm32: Fix Avenger96 | expand

Commit Message

Marek Vasut March 31, 2020, 5:51 p.m. UTC 
The AV96 RGMII uses different pinmux for ETH_RGMII_TXD0, ETH_RGMII_RXD2
and ETH_RGMII_TX_CTL. Use the correct pinmux to make ethernet operational.

Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay@st.com>
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Cc: Patrick Delaunay <patrick.delaunay@st.com>
Cc: Patrice Chotard <patrice.chotard@st.com>
---
V2: No change
V3: No change
---
 arch/arm/dts/stm32mp157a-avenger96.dts | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

Comments

Patrick DELAUNAY April 1, 2020, 10:03 a.m. UTC | #1 
Hi,

> From: Marek Vasut <marex@denx.de>
> Sent: mardi 31 mars 2020 19:52
> 
> The AV96 RGMII uses different pinmux for ETH_RGMII_TXD0,
> ETH_RGMII_RXD2 and ETH_RGMII_TX_CTL. Use the correct pinmux to make
> ethernet operational.
> 
> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
> Reviewed-by: Patrick Delaunay <patrick.delaunay@st.com>
> Signed-off-by: Marek Vasut <marex@denx.de>
> Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
> Cc: Patrick Delaunay <patrick.delaunay@st.com>
> Cc: Patrice Chotard <patrice.chotard@st.com>
> ---

Applied to u-boot-stm/master, thanks!

Regards

Patrick
diff mbox series

Patch

diff --git a/arch/arm/dts/stm32mp157a-avenger96.dts b/arch/arm/dts/stm32mp157a-avenger96.dts
index 5c7a326c12..88537e6769 100644
--- a/arch/arm/dts/stm32mp157a-avenger96.dts
+++ b/arch/arm/dts/stm32mp157a-avenger96.dts
@@ -95,8 +95,8 @@ 
 
 &ethernet0 {
 	status = "okay";
-	pinctrl-0 = <&ethernet0_rgmii_pins_a>;
-	pinctrl-1 = <&ethernet0_rgmii_pins_sleep_a>;
+	pinctrl-0 = <&ethernet0_rgmii_pins_b>;
+	pinctrl-1 = <&ethernet0_rgmii_pins_sleep_b>;
 	pinctrl-names = "default", "sleep";
 	phy-mode = "rgmii";
 	max-speed = <1000>;