@@ -16,6 +16,8 @@ ALL_TESTS="
trap_group_action_test
bad_trap_group_test
trap_group_stats_test
+ trap_policer_test
+ trap_policer_bind_test
port_del_test
dev_del_test
"
@@ -23,6 +25,7 @@ NETDEVSIM_PATH=/sys/bus/netdevsim/
DEV_ADDR=1337
DEV=netdevsim${DEV_ADDR}
DEVLINK_DEV=netdevsim/${DEV}
+DEBUGFS_DIR=/sys/kernel/debug/netdevsim/$DEV/
SLEEP_TIME=1
NETDEV=""
NUM_NETIFS=0
@@ -256,6 +259,119 @@ trap_group_stats_test()
log_test "Trap group statistics"
}
+trap_policer_test()
+{
+ local packets_t0
+ local packets_t1
+
+ if [ $(devlink_trap_policers_num_get) -eq 0 ]; then
+ check_err 1 "Failed to dump policers"
+ fi
+
+ devlink trap policer set $DEVLINK_DEV policer 1337 &> /dev/null
+ check_fail $? "Did not get an error for setting a non-existing policer"
+ devlink trap policer show $DEVLINK_DEV policer 1337 &> /dev/null
+ check_fail $? "Did not get an error for getting a non-existing policer"
+
+ devlink trap policer set $DEVLINK_DEV policer 1 rate 2000 burst 16
+ check_err $? "Failed to set valid parameters for a valid policer"
+ if [ $(devlink_trap_policer_rate_get 1) -ne 2000 ]; then
+ check_err 1 "Policer rate was not changed"
+ fi
+ if [ $(devlink_trap_policer_burst_get 1) -ne 16 ]; then
+ check_err 1 "Policer burst size was not changed"
+ fi
+
+ devlink trap policer set $DEVLINK_DEV policer 1 rate 0 &> /dev/null
+ check_fail $? "Policer rate was changed to rate lower than limit"
+ devlink trap policer set $DEVLINK_DEV policer 1 rate 9000 &> /dev/null
+ check_fail $? "Policer rate was changed to rate higher than limit"
+ devlink trap policer set $DEVLINK_DEV policer 1 burst 2 &> /dev/null
+ check_fail $? "Policer burst size was changed to burst size lower than limit"
+ devlink trap policer set $DEVLINK_DEV policer 1 rate 65537 &> /dev/null
+ check_fail $? "Policer burst size was changed to burst size higher than limit"
+ echo "y" > $DEBUGFS_DIR/fail_trap_policer_set
+ devlink trap policer set $DEVLINK_DEV policer 1 rate 3000 &> /dev/null
+ check_fail $? "Managed to set policer rate when should not"
+ echo "n" > $DEBUGFS_DIR/fail_trap_policer_set
+ if [ $(devlink_trap_policer_rate_get 1) -ne 2000 ]; then
+ check_err 1 "Policer rate was changed to an invalid value"
+ fi
+ if [ $(devlink_trap_policer_burst_get 1) -ne 16 ]; then
+ check_err 1 "Policer burst size was changed to an invalid value"
+ fi
+
+ packets_t0=$(devlink_trap_policer_rx_dropped_get 1)
+ sleep .5
+ packets_t1=$(devlink_trap_policer_rx_dropped_get 1)
+ if [ ! $packets_t1 -gt $packets_t0 ]; then
+ check_err 1 "Policer drop counter was not incremented"
+ fi
+
+ echo "y"> $DEBUGFS_DIR/fail_trap_policer_counter_get
+ devlink -s trap policer show $DEVLINK_DEV policer 1 &> /dev/null
+ check_fail $? "Managed to read policer drop counter when should not"
+ echo "n"> $DEBUGFS_DIR/fail_trap_policer_counter_get
+ devlink -s trap policer show $DEVLINK_DEV policer 1 &> /dev/null
+ check_err $? "Did not manage to read policer drop counter when should"
+
+ log_test "Trap policer"
+}
+
+trap_group_check_policer()
+{
+ local group_name=$1; shift
+
+ devlink -j -p trap group show $DEVLINK_DEV group $group_name \
+ | jq -e '.[][][]["policer"]' &> /dev/null
+}
+
+trap_policer_bind_test()
+{
+ devlink trap group set $DEVLINK_DEV group l2_drops policer 1
+ check_err $? "Failed to bind a valid policer"
+ if [ $(devlink_trap_group_policer_get "l2_drops") -ne 1 ]; then
+ check_err 1 "Bound policer was not changed"
+ fi
+
+ devlink trap group set $DEVLINK_DEV group l2_drops policer 1337 \
+ &> /dev/null
+ check_fail $? "Did not get an error for binding a non-existing policer"
+ if [ $(devlink_trap_group_policer_get "l2_drops") -ne 1 ]; then
+ check_err 1 "Bound policer was changed when should not"
+ fi
+
+ devlink trap group set $DEVLINK_DEV group l2_drops policer 0
+ check_err $? "Failed to unbind a policer when using ID 0"
+ trap_group_check_policer "l2_drops"
+ check_fail $? "Trap group has a policer after unbinding with ID 0"
+
+ devlink trap group set $DEVLINK_DEV group l2_drops policer 1
+ check_err $? "Failed to bind a valid policer"
+
+ devlink trap group set $DEVLINK_DEV group l2_drops nopolicer
+ check_err $? "Failed to unbind a policer when using 'nopolicer' keyword"
+ trap_group_check_policer "l2_drops"
+ check_fail $? "Trap group has a policer after unbinding with 'nopolicer' keyword"
+
+ devlink trap group set $DEVLINK_DEV group l2_drops policer 1
+ check_err $? "Failed to bind a valid policer"
+
+ echo "y"> $DEBUGFS_DIR/fail_trap_group_set
+ devlink trap group set $DEVLINK_DEV group l2_drops policer 2 \
+ &> /dev/null
+ check_fail $? "Managed to bind a policer when should not"
+ echo "n"> $DEBUGFS_DIR/fail_trap_group_set
+ devlink trap group set $DEVLINK_DEV group l2_drops policer 2
+ check_err $? "Did not manage to bind a policer when should"
+
+ devlink trap group set $DEVLINK_DEV group l2_drops action drop \
+ policer 1337 &> /dev/null
+ check_fail $? "Did not get an error for partially modified trap group"
+
+ log_test "Trap policer binding"
+}
+
port_del_test()
{
local group_name
@@ -420,6 +420,43 @@ devlink_trap_drop_cleanup()
tc filter del dev $dev egress protocol $proto pref $pref handle $handle flower
}
+devlink_trap_policers_num_get()
+{
+ devlink -j -p trap policer show | jq '.[]["'$DEVLINK_DEV'"] | length'
+}
+
+devlink_trap_policer_rate_get()
+{
+ local policer_id=$1; shift
+
+ devlink -j -p trap policer show $DEVLINK_DEV policer $policer_id \
+ | jq '.[][][]["rate"]'
+}
+
+devlink_trap_policer_burst_get()
+{
+ local policer_id=$1; shift
+
+ devlink -j -p trap policer show $DEVLINK_DEV policer $policer_id \
+ | jq '.[][][]["burst"]'
+}
+
+devlink_trap_policer_rx_dropped_get()
+{
+ local policer_id=$1; shift
+
+ devlink -j -p -s trap policer show $DEVLINK_DEV policer $policer_id \
+ | jq '.[][][]["stats"]["rx"]["dropped"]'
+}
+
+devlink_trap_group_policer_get()
+{
+ local group_name=$1; shift
+
+ devlink -j -p trap group show $DEVLINK_DEV group $group_name \
+ | jq '.[][][]["policer"]'
+}
+
devlink_port_by_netdev()
{
local if_name=$1