diff mbox

[U-Boot,3/3] board/amcc/taihu/flash.c: Fix GCC 4.6 build warnings

Message ID 1321559401-26495-3-git-send-email-wd@denx.de
State Accepted
Commit b63cb09719c993fc2812766c63df5a161fa2ac90
Delegated to: Stefan Roese
Headers show

Commit Message

Wolfgang Denk Nov. 17, 2011, 7:50 p.m. UTC
Fix:
flash.c: In function 'flash_erase_1':
flash.c:514:24: warning: variable 'l_sect' set but not used
[-Wunused-but-set-variable]
flash.c: In function 'flash_erase_2':
flash.c:956:24: warning: variable 'l_sect' set but not used
[-Wunused-but-set-variable]

Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Stefan Roese <sr@denx.de>
---
total: 0 errors, 0 warnings, 46 lines checked
NOTE: Ignored message types: COMPLEX_MACRO CONSIDER_KSTRTO MINMAX MULTISTATEMENT_MACRO_USE_DO_WHILE
0003-board-amcc-taihu-flash.c-Fix-GCC-4.6-build-warnings.patch has no obvious style problems and is ready for submission.

 board/amcc/taihu/flash.c |   10 ++--------
 1 files changed, 2 insertions(+), 8 deletions(-)

Comments

Stefan Roese Dec. 2, 2011, 7:16 a.m. UTC | #1
On Thursday 17 November 2011 20:50:01 Wolfgang Denk wrote:
> Fix:
> flash.c: In function 'flash_erase_1':
> flash.c:514:24: warning: variable 'l_sect' set but not used
> [-Wunused-but-set-variable]
> flash.c: In function 'flash_erase_2':
> flash.c:956:24: warning: variable 'l_sect' set but not used
> [-Wunused-but-set-variable]
> 
> Signed-off-by: Wolfgang Denk <wd@denx.de>
> Cc: Stefan Roese <sr@denx.de>

Thanks.

Acked-by: Stefan Roese <sr@denx.de>

Best regards,
Stefan

--
DENX Software Engineering GmbH,      MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich,  Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-0 Fax: (+49)-8142-66989-80 Email: office@denx.de
Wolfgang Denk Dec. 5, 2011, 10:18 p.m. UTC | #2
Dear Wolfgang Denk,

In message <1321559401-26495-3-git-send-email-wd@denx.de> you wrote:
> Fix:
> flash.c: In function 'flash_erase_1':
> flash.c:514:24: warning: variable 'l_sect' set but not used
> [-Wunused-but-set-variable]
> flash.c: In function 'flash_erase_2':
> flash.c:956:24: warning: variable 'l_sect' set but not used
> [-Wunused-but-set-variable]
> 
> Signed-off-by: Wolfgang Denk <wd@denx.de>
> Cc: Stefan Roese <sr@denx.de>
> ---
> total: 0 errors, 0 warnings, 46 lines checked
> NOTE: Ignored message types: COMPLEX_MACRO CONSIDER_KSTRTO MINMAX MULTISTATEMENT_MACRO_USE_DO_WHILE
> 0003-board-amcc-taihu-flash.c-Fix-GCC-4.6-build-warnings.patch has no obvious style problems and is ready for submission.
> 
>  board/amcc/taihu/flash.c |   10 ++--------
>  1 files changed, 2 insertions(+), 8 deletions(-)

Applied, thanks.

Best regards,

Wolfgang Denk
diff mbox

Patch

diff --git a/board/amcc/taihu/flash.c b/board/amcc/taihu/flash.c
index e9fbbb1..63968a4 100644
--- a/board/amcc/taihu/flash.c
+++ b/board/amcc/taihu/flash.c
@@ -511,7 +511,7 @@  int flash_erase(flash_info_t * info, int s_first, int s_last)
 {
 	volatile CONFIG_SYS_FLASH_WORD_SIZE *addr = (CONFIG_SYS_FLASH_WORD_SIZE *) (info->start[0]);
 	volatile CONFIG_SYS_FLASH_WORD_SIZE *addr2;
-	int flag, prot, sect, l_sect;
+	int flag, prot, sect;
 	int i;
 
 	if ((s_first < 0) || (s_first > s_last)) {
@@ -542,8 +542,6 @@  int flash_erase(flash_info_t * info, int s_first, int s_last)
 		printf("\n");
 	}
 
-	l_sect = -1;
-
 	/* Disable interrupts which might cause a timeout here */
 	flag = disable_interrupts();
 
@@ -569,7 +567,6 @@  int flash_erase(flash_info_t * info, int s_first, int s_last)
 				addr[CONFIG_SYS_FLASH_ADDR1] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00550055;
 				addr2[0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00300030;	/* sector erase */
 			}
-			l_sect = sect;
 			/*
 			 * Wait for each sector to complete, it's more
 			 * reliable.  According to AMD Spec, you must
@@ -953,7 +950,7 @@  static int flash_erase_2(flash_info_t * info, int s_first, int s_last)
 {
 	volatile CONFIG_SYS_FLASH_WORD_SIZE *addr = (CONFIG_SYS_FLASH_WORD_SIZE *) (info->start[0]);
 	volatile CONFIG_SYS_FLASH_WORD_SIZE *addr2;
-	int flag, prot, sect, l_sect;
+	int flag, prot, sect;
 	int i;
 
 	if ((s_first < 0) || (s_first > s_last)) {
@@ -984,8 +981,6 @@  static int flash_erase_2(flash_info_t * info, int s_first, int s_last)
 		printf("\n");
 	}
 
-	l_sect = -1;
-
 	/* Disable interrupts which might cause a timeout here */
 	flag = disable_interrupts();
 
@@ -1011,7 +1006,6 @@  static int flash_erase_2(flash_info_t * info, int s_first, int s_last)
 				addr[CONFIG_SYS_FLASH_CHAR_ADDR1] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x55555555;
 				addr2[0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x30303030;	/* sector erase */
 			}
-			l_sect = sect;
 			/*
 			 * Wait for each sector to complete, it's more
 			 * reliable.  According to AMD Spec, you must