Patchwork [U-Boot] Pull request: u-boot-arm/master

login
register
mail settings
Submitter Albert ARIBAUD
Date Nov. 15, 2011, 9:28 p.m.
Message ID <4EC2D979.6090301@aribaud.net>
Download mbox
Permalink /patch/125873/
State Accepted
Headers show

Pull-request

git://git.denx.de/u-boot-arm.git master

Comments

Albert ARIBAUD - Nov. 15, 2011, 9:28 p.m.
Hi Wolfgang,

The following changes since commit 5721385b187b3154c7768e6c182501022f4e2e45:

   Merge branch 'master' of git://git.denx.de/u-boot-mpc83xx (2011-11-08 
07:44:52 +0100)

are available in the git repository at:

   git://git.denx.de/u-boot-arm.git master

Alexander Holler (1):
       BeagleBoard: config: Switch to ttyO2

Asen Dimov (1):
       ARM: define CONFIG_MACH_TYPE for all ronetix boards

Christian Riesch (3):
       arm, davinci: Rename AM1808 lowlevel functions to DA850
       arm, davinci: Remove the duplication of LPSC functions
       arm, davinci: Fix setting of the SDRAM configuration register

David Müller (ELSOFT AG) (2):
       ARM: re-add MACH_TYPE_XXXXXX for VCMA9 board and add CONFIG_MACH_TYPE
       ARM: remove superfluous setting of arch_number in board specific 
code.

Fabio Estevam (5):
       qong: Use generic function for configuring GPR register
       mx31: Remove duplicate definition for GPR register
       mx31: Use proper IO accessor for GPR register
       mx31: Fix checkpatch warnings in generic.c
       m28evk: Fix comment about the number of RAM banks

Heiko Schocher (3):
       arm, davinci: da850/dm365 lowlevel cleanup
       arm, davinci_emac: fix driver bug if more then 3 PHYs are detected
       arm, davinci: add DAVINCI_MMC_CLKID

Linus Walleij (7):
       integrator: do not test first part of the memory
       integrator: pass configs for core modules
       integrator: move text offset to config
       integrator: use io-accessors for board init
       integrator: make flash writeable on boot
       integrator: add system controller header
       integrator: enable Vpp and disable flash protection

Manjunath Hadli (2):
       dm646x: add new configuration for dm6467T
       dm646x: pass board revision info to kernel

Marek Vasut (27):
       SPL: Allow ARM926EJS to avoid compiling in the CPU support code
       iMX28: Initial support for iMX28 CPU
       iMX28: Add SSP MMC driver
       FEC: Add support for iMX28 quirks
       iMX28: Add PINMUX control
       iMX28: Add I2C bus driver
       iMX28: Add GPIO control
       iMX28: Add SPI driver
       iMX28: Add APBH DMA driver
       iMX28: Add GPMI NAND driver
       iMX28: Add driver for internal RTC
       iMX28: Add image header generator tool
       iMX28: Add u-boot.sb target to Makefile
       iMX28: Add support for DENX M28EVK board
       M28: Add MMC SPL
       M28: Add doc/README.m28 documentation
       iMX28: Fix ARM vector handling
       M28: Add memory detection into SPL
       iMX28: Add USB and USB PHY register definitions
       iMX28: Add USB HOST driver
       M28EVK: Enable USB HOST support
       PXA: Drop csb226 and innokom boards (unmaintained)
       PXA: Cleanup serial_pxa
       PXA: vpac270: Enable the new generic MMC driver
       OneNAND: Add simple OneNAND SPL
       GCC4.6: Fix common/usb.c on xscale
       GCC4.6: Squash warnings in onenand_base.c

Nagabhushana Netagunte (1):
       da850: add new config file for AM18xx

Po-Yu Chuang (1):
       arm: a320: fix broken timer

Prabhakar Lad (1):
       da8xxevm: fix build error

Sricharan (7):
       omap4: make omap4 code common for future reuse
       omap: Checkpatch fixes
       omap5: Add minimal support for omap5430.
       omap5: clocks: Add clocks support for omap5 platform.
       omap5: emif: Add emif/ddr configurations required for omap5 evm
       omap4/5: Add support for booting with CH.
       omap5: Add omap5_evm board build support.

Stefano Babic (1):
       MX25: zmx25: GCC4.6 fix build warnings

Tom Rini (2):
       devkit8000: Fix NAND SPL on boards with 256MB NAND
       OMAP3: Change omap3_evm maintainer

  .gitignore                                         |    1 +
  MAINTAINERS                                        |   15 +-
  Makefile                                           |   14 +-
  README                                             |    6 +
  arch/arm/cpu/arm1136/mx31/generic.c                |   11 +-
  arch/arm/cpu/arm920t/a320/timer.c                  |  134 +--
  arch/arm/cpu/arm926ejs/Makefile                    |    6 +
  arch/arm/cpu/arm926ejs/davinci/Makefile            |    2 +-
  arch/arm/cpu/arm926ejs/davinci/am1808_lowlevel.c   |  428 -------
  arch/arm/cpu/arm926ejs/davinci/da850_lowlevel.c    |  311 +++++
  arch/arm/cpu/arm926ejs/davinci/dm365_lowlevel.c    |   73 +-
  .../arm/cpu/arm926ejs/mx28}/Makefile               |   11 +-
  arch/arm/cpu/arm926ejs/mx28/clock.c                |  355 ++++++
  arch/arm/cpu/arm926ejs/mx28/iomux.c                |  109 ++
  arch/arm/cpu/arm926ejs/mx28/mx28.c                 |  221 ++++
  arch/arm/cpu/arm926ejs/mx28/timer.c                |  141 +++
  arch/arm/cpu/armv7/omap-common/Makefile            |   13 +
  arch/arm/cpu/armv7/omap-common/clocks-common.c     |  609 ++++++++++
  arch/arm/cpu/armv7/omap-common/emif-common.c       | 1140 
+++++++++++++++++
  arch/arm/cpu/armv7/omap-common/hwinit-common.c     |  267 ++++
  .../armv7/{omap4 => omap-common}/lowlevel_init.S   |   37 +-
  .../{omap4/mem.c => omap-common/mem-common.c}      |    0
  arch/arm/cpu/armv7/omap-common/spl.c               |    9 +-
  arch/arm/cpu/armv7/omap4/Makefile                  |   11 +-
  arch/arm/cpu/armv7/omap4/board.c                   |  384 ------
  arch/arm/cpu/armv7/omap4/clocks.c                  |  628 ++--------
  arch/arm/cpu/armv7/omap4/emif.c                    | 1135 
+-----------------
  arch/arm/cpu/armv7/omap4/hwinit.c                  |  167 +++
  arch/arm/cpu/armv7/omap4/omap4_mux_data.h          |   83 --
  arch/arm/cpu/armv7/omap4/sdram_elpida.c            |    2 +-
  arch/arm/cpu/armv7/omap5/Makefile                  |   48 +
  arch/arm/cpu/armv7/omap5/clocks.c                  |  432 +++++++
  arch/arm/cpu/armv7/omap5/config.mk                 |   28 +
  arch/arm/cpu/armv7/omap5/emif.c                    |  105 ++
  arch/arm/cpu/armv7/omap5/hwinit.c                  |   78 ++
  arch/arm/cpu/armv7/omap5/sdram_elpida.c            |  178 +++
  arch/arm/include/asm/arch-davinci/aintc_defs.h     |    2 +
  .../{am1808_lowlevel.h => da850_lowlevel.h}        |   26 +-
  arch/arm/include/asm/arch-davinci/ddr2_defs.h      |    4 +
  arch/arm/include/asm/arch-davinci/emif_defs.h      |    1 +
  arch/arm/include/asm/arch-davinci/hardware.h       |   22 +
  arch/arm/include/asm/arch-davinci/pll_defs.h       |   14 +
  arch/arm/include/asm/arch-mx28/clock.h             |   61 +
  arch/arm/include/asm/arch-mx28/dma.h               |  170 +++
  arch/arm/include/asm/arch-mx28/gpio.h              |   32 +
  arch/arm/include/asm/arch-mx28/imx-regs.h          |   39 +
  arch/arm/include/asm/arch-mx28/iomux-mx28.h        |  537 ++++++++
  arch/arm/include/asm/arch-mx28/iomux.h             |  168 +++
  arch/arm/include/asm/arch-mx28/regs-apbh.h         |  466 +++++++
  arch/arm/include/asm/arch-mx28/regs-base.h         |   88 ++
  arch/arm/include/asm/arch-mx28/regs-bch.h          |  230 ++++
  arch/arm/include/asm/arch-mx28/regs-clkctrl.h      |  312 +++++
  arch/arm/include/asm/arch-mx28/regs-common.h       |   66 +
  arch/arm/include/asm/arch-mx28/regs-gpmi.h         |  222 ++++
  arch/arm/include/asm/arch-mx28/regs-i2c.h          |  207 ++++
  arch/arm/include/asm/arch-mx28/regs-ocotp.h        |  173 +++
  arch/arm/include/asm/arch-mx28/regs-pinctrl.h      | 1284 
++++++++++++++++++++
  arch/arm/include/asm/arch-mx28/regs-power.h        |  413 +++++++
  arch/arm/include/asm/arch-mx28/regs-rtc.h          |  147 +++
  arch/arm/include/asm/arch-mx28/regs-ssp.h          |  349 ++++++
  arch/arm/include/asm/arch-mx28/regs-timrot.h       |  171 +++
  arch/arm/include/asm/arch-mx28/regs-usb.h          |  178 +++
  arch/arm/include/asm/arch-mx28/regs-usbphy.h       |  151 +++
  arch/arm/include/asm/arch-mx28/sys_proto.h         |   32 +
  arch/arm/include/asm/arch-mx31/imx-regs.h          |    7 +-
  arch/arm/include/asm/arch-omap3/mmc_host_def.h     |   11 +-
  arch/arm/include/asm/arch-omap4/clocks.h           |   23 +
  arch/arm/include/asm/arch-omap4/emif.h             | 1021 ----------------
  arch/arm/include/asm/arch-omap4/mmc_host_def.h     |   11 +-
  .../arm/include/asm/arch-omap4/{omap4.h => omap.h} |   46 +-
  arch/arm/include/asm/arch-omap4/sys_proto.h        |   38 +-
  arch/arm/include/asm/arch-omap5/clocks.h           |  722 +++++++++++
  arch/arm/include/asm/arch-omap5/cpu.h              |  175 +++
  arch/arm/include/asm/arch-omap5/gpio.h             |   50 +
  arch/arm/include/asm/arch-omap5/i2c.h              |   74 ++
  arch/arm/include/asm/arch-omap5/mmc_host_def.h     |  174 +++
  arch/arm/include/asm/arch-omap5/mux_omap5.h        |  344 ++++++
  arch/arm/include/asm/arch-omap5/omap.h             |  223 ++++
  arch/arm/include/asm/arch-omap5/sys_proto.h        |  122 ++
  arch/arm/include/asm/arch-pxa/pxa-regs.h           |  111 --
  arch/arm/include/asm/arch-pxa/regs-uart.h          |  109 ++
  arch/arm/include/asm/armv7.h                       |    3 +
  arch/arm/include/asm/emif.h                        | 1035 ++++++++++++++++
  arch/arm/include/asm/mach-types.h                  |   13 +
  arch/arm/include/asm/omap_common.h                 |   31 +-
  board/armltd/integrator/arm-ebi.h                  |   62 +
  board/armltd/integrator/config.mk                  |    5 -
  board/armltd/integrator/integrator-sc.h            |   91 ++
  board/armltd/integrator/integrator.c               |   63 +-
  board/csb226/csb226.c                              |  166 ---
  board/csb226/flash.c                               |  368 ------
  board/davedenx/qong/qong.c                         |    2 +-
  board/davinci/dm6467evm/dm6467evm.c                |   20 +
  board/denx/m28evk/Makefile                         |   56 +
  .../sys_info.c => board/denx/m28evk/m28_init.h     |   48 +-
  board/denx/m28evk/m28evk.c                         |  216 ++++
  board/denx/m28evk/mem_init.c                       |  240 ++++
  board/denx/m28evk/mmc_boot.c                       |  273 +++++
  board/denx/m28evk/power_init.c                     |  913 ++++++++++++++
  board/denx/m28evk/start.S                          |  234 ++++
  board/denx/m28evk/u-boot-spl.lds                   |   87 ++
  board/denx/m28evk/u-boot.bd                        |   14 +
  board/innokom/flash.c                              |  421 -------
  board/innokom/innokom.c                            |  190 ---
  board/mpl/vcma9/vcma9.c                            |    3 -
  board/ronetix/pm9261/pm9261.c                      |    3 -
  board/ronetix/pm9263/pm9263.c                      |    3 -
  board/ronetix/pm9g45/pm9g45.c                      |    2 -
  board/syteco/zmx25/zmx25.c                         |    2 -
  board/{innokom => ti/omap5_evm}/Makefile           |   12 +-
  board/ti/omap5_evm/evm.c                           |  101 ++
  board/ti/omap5_evm/mux_data.h                      |  275 +++++
  board/ti/panda/Makefile                            |    2 -
  board/ti/panda/panda.c                             |   27 +-
  board/ti/panda/panda_mux_data.h                    |   54 +-
  board/ti/sdp4430/Makefile                          |    4 +-
  board/ti/sdp4430/sdp.c                             |   27 +-
  board/ti/sdp4430/sdp4430_mux_data.h                |   53 +-
  board/vpac270/vpac270.c                            |    9 +
  boards.cfg                                         |   22 +-
  common/usb.c                                       |   13 +-
  doc/README.m28                                     |  223 ++++
  drivers/dma/Makefile                               |    1 +
  drivers/dma/apbh_dma.c                             |  691 +++++++++++
  drivers/gpio/Makefile                              |    1 +
  drivers/gpio/mxs_gpio.c                            |  136 ++
  drivers/i2c/Makefile                               |    1 +
  drivers/i2c/mxs_i2c.c                              |  246 ++++
  drivers/mmc/Makefile                               |    1 +
  drivers/mmc/mxsmmc.c                               |  351 ++++++
  drivers/mmc/omap_hsmmc.c                           |   26 +-
  drivers/mtd/nand/Makefile                          |    1 +
  drivers/mtd/nand/mxs_nand.c                        | 1118 
+++++++++++++++++
  drivers/mtd/onenand/Makefile                       |    4 +
  drivers/mtd/onenand/onenand_base.c                 |   18 +-
  drivers/mtd/onenand/onenand_spl.c                  |  146 +++
  drivers/net/davinci_emac.c                         |   24 +-
  drivers/net/fec_mxc.c                              |   44 +-
  drivers/rtc/Makefile                               |    1 +
  drivers/rtc/mxsrtc.c                               |   86 ++
  drivers/serial/serial_pxa.c                        |  464 +++-----
  drivers/spi/Makefile                               |    1 +
  drivers/spi/mxs_spi.c                              |  186 +++
  drivers/usb/host/Makefile                          |    1 +
  drivers/usb/host/ehci-mxs.c                        |  154 +++
  include/configs/VCMA9.h                            |    4 +
  include/configs/csb226.h                           |  506 --------
  include/configs/da850_am18xxevm.h                  |  245 ++++
  include/configs/davinci_dm6467Tevm.h               |  163 +++
  include/configs/davinci_dm6467evm.h                |    1 +
  include/configs/devkit8000.h                       |    1 +
  include/configs/innokom.h                          |  507 --------
  include/configs/integratorap.h                     |    1 +
  include/configs/integratorcp.h                     |    1 +
  include/configs/m28evk.h                           |  303 +++++
  include/configs/omap3_beagle.h                     |    2 +-
  include/configs/omap4_common.h                     |    7 +-
  include/configs/omap5_evm.h                        |  284 +++++
  include/configs/pm9261.h                           |    3 +
  include/configs/pm9263.h                           |    3 +
  include/configs/pm9g45.h                           |    3 +
  include/configs/vpac270.h                          |    3 +-
  include/onenand_uboot.h                            |    3 +
  spl/Makefile                                       |    4 +
  tools/.gitignore                                   |    1 +
  tools/Makefile                                     |    6 +
  tools/mxsboot.c                                    |  684 +++++++++++
  167 files changed, 21354 insertions(+), 6487 deletions(-)
  delete mode 100644 arch/arm/cpu/arm926ejs/davinci/am1808_lowlevel.c
  create mode 100644 arch/arm/cpu/arm926ejs/davinci/da850_lowlevel.c
  rename {board/csb226 => arch/arm/cpu/arm926ejs/mx28}/Makefile (86%)
  create mode 100644 arch/arm/cpu/arm926ejs/mx28/clock.c
  create mode 100644 arch/arm/cpu/arm926ejs/mx28/iomux.c
  create mode 100644 arch/arm/cpu/arm926ejs/mx28/mx28.c
  create mode 100644 arch/arm/cpu/arm926ejs/mx28/timer.c
  create mode 100644 arch/arm/cpu/armv7/omap-common/clocks-common.c
  create mode 100644 arch/arm/cpu/armv7/omap-common/emif-common.c
  create mode 100644 arch/arm/cpu/armv7/omap-common/hwinit-common.c
  rename arch/arm/cpu/armv7/{omap4 => omap-common}/lowlevel_init.S (76%)
  rename arch/arm/cpu/armv7/{omap4/mem.c => omap-common/mem-common.c} (100%)
  delete mode 100644 arch/arm/cpu/armv7/omap4/board.c
  create mode 100644 arch/arm/cpu/armv7/omap4/hwinit.c
  delete mode 100644 arch/arm/cpu/armv7/omap4/omap4_mux_data.h
  create mode 100644 arch/arm/cpu/armv7/omap5/Makefile
  create mode 100644 arch/arm/cpu/armv7/omap5/clocks.c
  create mode 100644 arch/arm/cpu/armv7/omap5/config.mk
  create mode 100644 arch/arm/cpu/armv7/omap5/emif.c
  create mode 100644 arch/arm/cpu/armv7/omap5/hwinit.c
  create mode 100644 arch/arm/cpu/armv7/omap5/sdram_elpida.c
  rename arch/arm/include/asm/arch-davinci/{am1808_lowlevel.h => 
da850_lowlevel.h} (63%)
  create mode 100644 arch/arm/include/asm/arch-mx28/clock.h
  create mode 100644 arch/arm/include/asm/arch-mx28/dma.h
  create mode 100644 arch/arm/include/asm/arch-mx28/gpio.h
  create mode 100644 arch/arm/include/asm/arch-mx28/imx-regs.h
  create mode 100644 arch/arm/include/asm/arch-mx28/iomux-mx28.h
  create mode 100644 arch/arm/include/asm/arch-mx28/iomux.h
  create mode 100644 arch/arm/include/asm/arch-mx28/regs-apbh.h
  create mode 100644 arch/arm/include/asm/arch-mx28/regs-base.h
  create mode 100644 arch/arm/include/asm/arch-mx28/regs-bch.h
  create mode 100644 arch/arm/include/asm/arch-mx28/regs-clkctrl.h
  create mode 100644 arch/arm/include/asm/arch-mx28/regs-common.h
  create mode 100644 arch/arm/include/asm/arch-mx28/regs-gpmi.h
  create mode 100644 arch/arm/include/asm/arch-mx28/regs-i2c.h
  create mode 100644 arch/arm/include/asm/arch-mx28/regs-ocotp.h
  create mode 100644 arch/arm/include/asm/arch-mx28/regs-pinctrl.h
  create mode 100644 arch/arm/include/asm/arch-mx28/regs-power.h
  create mode 100644 arch/arm/include/asm/arch-mx28/regs-rtc.h
  create mode 100644 arch/arm/include/asm/arch-mx28/regs-ssp.h
  create mode 100644 arch/arm/include/asm/arch-mx28/regs-timrot.h
  create mode 100644 arch/arm/include/asm/arch-mx28/regs-usb.h
  create mode 100644 arch/arm/include/asm/arch-mx28/regs-usbphy.h
  create mode 100644 arch/arm/include/asm/arch-mx28/sys_proto.h
  delete mode 100644 arch/arm/include/asm/arch-omap4/emif.h
  rename arch/arm/include/asm/arch-omap4/{omap4.h => omap.h} (87%)
  create mode 100644 arch/arm/include/asm/arch-omap5/clocks.h
  create mode 100644 arch/arm/include/asm/arch-omap5/cpu.h
  create mode 100644 arch/arm/include/asm/arch-omap5/gpio.h
  create mode 100644 arch/arm/include/asm/arch-omap5/i2c.h
  create mode 100644 arch/arm/include/asm/arch-omap5/mmc_host_def.h
  create mode 100644 arch/arm/include/asm/arch-omap5/mux_omap5.h
  create mode 100644 arch/arm/include/asm/arch-omap5/omap.h
  create mode 100644 arch/arm/include/asm/arch-omap5/sys_proto.h
  create mode 100644 arch/arm/include/asm/arch-pxa/regs-uart.h
  create mode 100644 arch/arm/include/asm/emif.h
  create mode 100644 board/armltd/integrator/arm-ebi.h
  delete mode 100644 board/armltd/integrator/config.mk
  create mode 100644 board/armltd/integrator/integrator-sc.h
  delete mode 100644 board/csb226/csb226.c
  delete mode 100644 board/csb226/flash.c
  create mode 100644 board/denx/m28evk/Makefile
  rename arch/arm/cpu/armv7/omap4/sys_info.c => 
board/denx/m28evk/m28_init.h (53%)
  create mode 100644 board/denx/m28evk/m28evk.c
  create mode 100644 board/denx/m28evk/mem_init.c
  create mode 100644 board/denx/m28evk/mmc_boot.c
  create mode 100644 board/denx/m28evk/power_init.c
  create mode 100644 board/denx/m28evk/start.S
  create mode 100644 board/denx/m28evk/u-boot-spl.lds
  create mode 100644 board/denx/m28evk/u-boot.bd
  delete mode 100644 board/innokom/flash.c
  delete mode 100644 board/innokom/innokom.c
  rename board/{innokom => ti/omap5_evm}/Makefile (86%)
  create mode 100644 board/ti/omap5_evm/evm.c
  create mode 100644 board/ti/omap5_evm/mux_data.h
  create mode 100644 doc/README.m28
  create mode 100644 drivers/dma/apbh_dma.c
  create mode 100644 drivers/gpio/mxs_gpio.c
  create mode 100644 drivers/i2c/mxs_i2c.c
  create mode 100644 drivers/mmc/mxsmmc.c
  create mode 100644 drivers/mtd/nand/mxs_nand.c
  create mode 100644 drivers/mtd/onenand/onenand_spl.c
  create mode 100644 drivers/rtc/mxsrtc.c
  create mode 100644 drivers/spi/mxs_spi.c
  create mode 100644 drivers/usb/host/ehci-mxs.c
  delete mode 100644 include/configs/csb226.h
  create mode 100644 include/configs/da850_am18xxevm.h
  create mode 100644 include/configs/davinci_dm6467Tevm.h
  delete mode 100644 include/configs/innokom.h
  create mode 100644 include/configs/m28evk.h
  create mode 100644 include/configs/omap5_evm.h
  create mode 100644 tools/mxsboot.c

Amicalement,
Simon Glass - Nov. 16, 2011, 12:04 a.m.
Hi Albert,

On Tue, Nov 15, 2011 at 1:28 PM, Albert ARIBAUD
<albert.u.boot@aribaud.net> wrote:
> Hi Wolfgang,
>
> The following changes since commit 5721385b187b3154c7768e6c182501022f4e2e45:
>
>   Merge branch 'master' of git://git.denx.de/u-boot-mpc83xx (2011-11-08
> 07:44:52 +0100)
>
> are available in the git repository at:
>
>   git://git.denx.de/u-boot-arm.git master

As with the last pull request, I don't see the Tegra patches in your
list here. Is the problem that we don't have our own Tegra maintainer?

Please can you suggest what we can do here to get things moving?

Regards,
Simon


>
> Alexander Holler (1):
>       BeagleBoard: config: Switch to ttyO2
>
> Asen Dimov (1):
>       ARM: define CONFIG_MACH_TYPE for all ronetix boards
>
> Christian Riesch (3):
>       arm, davinci: Rename AM1808 lowlevel functions to DA850
>       arm, davinci: Remove the duplication of LPSC functions
>       arm, davinci: Fix setting of the SDRAM configuration register
>
> David Müller (ELSOFT AG) (2):
>       ARM: re-add MACH_TYPE_XXXXXX for VCMA9 board and add CONFIG_MACH_TYPE
>       ARM: remove superfluous setting of arch_number in board specific
> code.
>
> Fabio Estevam (5):
>       qong: Use generic function for configuring GPR register
>       mx31: Remove duplicate definition for GPR register
>       mx31: Use proper IO accessor for GPR register
>       mx31: Fix checkpatch warnings in generic.c
>       m28evk: Fix comment about the number of RAM banks
>
> Heiko Schocher (3):
>       arm, davinci: da850/dm365 lowlevel cleanup
>       arm, davinci_emac: fix driver bug if more then 3 PHYs are detected
>       arm, davinci: add DAVINCI_MMC_CLKID
>
> Linus Walleij (7):
>       integrator: do not test first part of the memory
>       integrator: pass configs for core modules
>       integrator: move text offset to config
>       integrator: use io-accessors for board init
>       integrator: make flash writeable on boot
>       integrator: add system controller header
>       integrator: enable Vpp and disable flash protection
>
> Manjunath Hadli (2):
>       dm646x: add new configuration for dm6467T
>       dm646x: pass board revision info to kernel
>
> Marek Vasut (27):
>       SPL: Allow ARM926EJS to avoid compiling in the CPU support code
>       iMX28: Initial support for iMX28 CPU
>       iMX28: Add SSP MMC driver
>       FEC: Add support for iMX28 quirks
>       iMX28: Add PINMUX control
>       iMX28: Add I2C bus driver
>       iMX28: Add GPIO control
>       iMX28: Add SPI driver
>       iMX28: Add APBH DMA driver
>       iMX28: Add GPMI NAND driver
>       iMX28: Add driver for internal RTC
>       iMX28: Add image header generator tool
>       iMX28: Add u-boot.sb target to Makefile
>       iMX28: Add support for DENX M28EVK board
>       M28: Add MMC SPL
>       M28: Add doc/README.m28 documentation
>       iMX28: Fix ARM vector handling
>       M28: Add memory detection into SPL
>       iMX28: Add USB and USB PHY register definitions
>       iMX28: Add USB HOST driver
>       M28EVK: Enable USB HOST support
>       PXA: Drop csb226 and innokom boards (unmaintained)
>       PXA: Cleanup serial_pxa
>       PXA: vpac270: Enable the new generic MMC driver
>       OneNAND: Add simple OneNAND SPL
>       GCC4.6: Fix common/usb.c on xscale
>       GCC4.6: Squash warnings in onenand_base.c
>
> Nagabhushana Netagunte (1):
>       da850: add new config file for AM18xx
>
> Po-Yu Chuang (1):
>       arm: a320: fix broken timer
>
> Prabhakar Lad (1):
>       da8xxevm: fix build error
>
> Sricharan (7):
>       omap4: make omap4 code common for future reuse
>       omap: Checkpatch fixes
>       omap5: Add minimal support for omap5430.
>       omap5: clocks: Add clocks support for omap5 platform.
>       omap5: emif: Add emif/ddr configurations required for omap5 evm
>       omap4/5: Add support for booting with CH.
>       omap5: Add omap5_evm board build support.
>
> Stefano Babic (1):
>       MX25: zmx25: GCC4.6 fix build warnings
>
> Tom Rini (2):
>       devkit8000: Fix NAND SPL on boards with 256MB NAND
>       OMAP3: Change omap3_evm maintainer
>
>  .gitignore                                         |    1 +
>  MAINTAINERS                                        |   15 +-
>  Makefile                                           |   14 +-
>  README                                             |    6 +
>  arch/arm/cpu/arm1136/mx31/generic.c                |   11 +-
>  arch/arm/cpu/arm920t/a320/timer.c                  |  134 +--
>  arch/arm/cpu/arm926ejs/Makefile                    |    6 +
>  arch/arm/cpu/arm926ejs/davinci/Makefile            |    2 +-
>  arch/arm/cpu/arm926ejs/davinci/am1808_lowlevel.c   |  428 -------
>  arch/arm/cpu/arm926ejs/davinci/da850_lowlevel.c    |  311 +++++
>  arch/arm/cpu/arm926ejs/davinci/dm365_lowlevel.c    |   73 +-
>  .../arm/cpu/arm926ejs/mx28}/Makefile               |   11 +-
>  arch/arm/cpu/arm926ejs/mx28/clock.c                |  355 ++++++
>  arch/arm/cpu/arm926ejs/mx28/iomux.c                |  109 ++
>  arch/arm/cpu/arm926ejs/mx28/mx28.c                 |  221 ++++
>  arch/arm/cpu/arm926ejs/mx28/timer.c                |  141 +++
>  arch/arm/cpu/armv7/omap-common/Makefile            |   13 +
>  arch/arm/cpu/armv7/omap-common/clocks-common.c     |  609 ++++++++++
>  arch/arm/cpu/armv7/omap-common/emif-common.c       | 1140
> +++++++++++++++++
>  arch/arm/cpu/armv7/omap-common/hwinit-common.c     |  267 ++++
>  .../armv7/{omap4 => omap-common}/lowlevel_init.S   |   37 +-
>  .../{omap4/mem.c => omap-common/mem-common.c}      |    0
>  arch/arm/cpu/armv7/omap-common/spl.c               |    9 +-
>  arch/arm/cpu/armv7/omap4/Makefile                  |   11 +-
>  arch/arm/cpu/armv7/omap4/board.c                   |  384 ------
>  arch/arm/cpu/armv7/omap4/clocks.c                  |  628 ++--------
>  arch/arm/cpu/armv7/omap4/emif.c                    | 1135
> +-----------------
>  arch/arm/cpu/armv7/omap4/hwinit.c                  |  167 +++
>  arch/arm/cpu/armv7/omap4/omap4_mux_data.h          |   83 --
>  arch/arm/cpu/armv7/omap4/sdram_elpida.c            |    2 +-
>  arch/arm/cpu/armv7/omap5/Makefile                  |   48 +
>  arch/arm/cpu/armv7/omap5/clocks.c                  |  432 +++++++
>  arch/arm/cpu/armv7/omap5/config.mk                 |   28 +
>  arch/arm/cpu/armv7/omap5/emif.c                    |  105 ++
>  arch/arm/cpu/armv7/omap5/hwinit.c                  |   78 ++
>  arch/arm/cpu/armv7/omap5/sdram_elpida.c            |  178 +++
>  arch/arm/include/asm/arch-davinci/aintc_defs.h     |    2 +
>  .../{am1808_lowlevel.h => da850_lowlevel.h}        |   26 +-
>  arch/arm/include/asm/arch-davinci/ddr2_defs.h      |    4 +
>  arch/arm/include/asm/arch-davinci/emif_defs.h      |    1 +
>  arch/arm/include/asm/arch-davinci/hardware.h       |   22 +
>  arch/arm/include/asm/arch-davinci/pll_defs.h       |   14 +
>  arch/arm/include/asm/arch-mx28/clock.h             |   61 +
>  arch/arm/include/asm/arch-mx28/dma.h               |  170 +++
>  arch/arm/include/asm/arch-mx28/gpio.h              |   32 +
>  arch/arm/include/asm/arch-mx28/imx-regs.h          |   39 +
>  arch/arm/include/asm/arch-mx28/iomux-mx28.h        |  537 ++++++++
>  arch/arm/include/asm/arch-mx28/iomux.h             |  168 +++
>  arch/arm/include/asm/arch-mx28/regs-apbh.h         |  466 +++++++
>  arch/arm/include/asm/arch-mx28/regs-base.h         |   88 ++
>  arch/arm/include/asm/arch-mx28/regs-bch.h          |  230 ++++
>  arch/arm/include/asm/arch-mx28/regs-clkctrl.h      |  312 +++++
>  arch/arm/include/asm/arch-mx28/regs-common.h       |   66 +
>  arch/arm/include/asm/arch-mx28/regs-gpmi.h         |  222 ++++
>  arch/arm/include/asm/arch-mx28/regs-i2c.h          |  207 ++++
>  arch/arm/include/asm/arch-mx28/regs-ocotp.h        |  173 +++
>  arch/arm/include/asm/arch-mx28/regs-pinctrl.h      | 1284
> ++++++++++++++++++++
>  arch/arm/include/asm/arch-mx28/regs-power.h        |  413 +++++++
>  arch/arm/include/asm/arch-mx28/regs-rtc.h          |  147 +++
>  arch/arm/include/asm/arch-mx28/regs-ssp.h          |  349 ++++++
>  arch/arm/include/asm/arch-mx28/regs-timrot.h       |  171 +++
>  arch/arm/include/asm/arch-mx28/regs-usb.h          |  178 +++
>  arch/arm/include/asm/arch-mx28/regs-usbphy.h       |  151 +++
>  arch/arm/include/asm/arch-mx28/sys_proto.h         |   32 +
>  arch/arm/include/asm/arch-mx31/imx-regs.h          |    7 +-
>  arch/arm/include/asm/arch-omap3/mmc_host_def.h     |   11 +-
>  arch/arm/include/asm/arch-omap4/clocks.h           |   23 +
>  arch/arm/include/asm/arch-omap4/emif.h             | 1021 ----------------
>  arch/arm/include/asm/arch-omap4/mmc_host_def.h     |   11 +-
>  .../arm/include/asm/arch-omap4/{omap4.h => omap.h} |   46 +-
>  arch/arm/include/asm/arch-omap4/sys_proto.h        |   38 +-
>  arch/arm/include/asm/arch-omap5/clocks.h           |  722 +++++++++++
>  arch/arm/include/asm/arch-omap5/cpu.h              |  175 +++
>  arch/arm/include/asm/arch-omap5/gpio.h             |   50 +
>  arch/arm/include/asm/arch-omap5/i2c.h              |   74 ++
>  arch/arm/include/asm/arch-omap5/mmc_host_def.h     |  174 +++
>  arch/arm/include/asm/arch-omap5/mux_omap5.h        |  344 ++++++
>  arch/arm/include/asm/arch-omap5/omap.h             |  223 ++++
>  arch/arm/include/asm/arch-omap5/sys_proto.h        |  122 ++
>  arch/arm/include/asm/arch-pxa/pxa-regs.h           |  111 --
>  arch/arm/include/asm/arch-pxa/regs-uart.h          |  109 ++
>  arch/arm/include/asm/armv7.h                       |    3 +
>  arch/arm/include/asm/emif.h                        | 1035 ++++++++++++++++
>  arch/arm/include/asm/mach-types.h                  |   13 +
>  arch/arm/include/asm/omap_common.h                 |   31 +-
>  board/armltd/integrator/arm-ebi.h                  |   62 +
>  board/armltd/integrator/config.mk                  |    5 -
>  board/armltd/integrator/integrator-sc.h            |   91 ++
>  board/armltd/integrator/integrator.c               |   63 +-
>  board/csb226/csb226.c                              |  166 ---
>  board/csb226/flash.c                               |  368 ------
>  board/davedenx/qong/qong.c                         |    2 +-
>  board/davinci/dm6467evm/dm6467evm.c                |   20 +
>  board/denx/m28evk/Makefile                         |   56 +
>  .../sys_info.c => board/denx/m28evk/m28_init.h     |   48 +-
>  board/denx/m28evk/m28evk.c                         |  216 ++++
>  board/denx/m28evk/mem_init.c                       |  240 ++++
>  board/denx/m28evk/mmc_boot.c                       |  273 +++++
>  board/denx/m28evk/power_init.c                     |  913 ++++++++++++++
>  board/denx/m28evk/start.S                          |  234 ++++
>  board/denx/m28evk/u-boot-spl.lds                   |   87 ++
>  board/denx/m28evk/u-boot.bd                        |   14 +
>  board/innokom/flash.c                              |  421 -------
>  board/innokom/innokom.c                            |  190 ---
>  board/mpl/vcma9/vcma9.c                            |    3 -
>  board/ronetix/pm9261/pm9261.c                      |    3 -
>  board/ronetix/pm9263/pm9263.c                      |    3 -
>  board/ronetix/pm9g45/pm9g45.c                      |    2 -
>  board/syteco/zmx25/zmx25.c                         |    2 -
>  board/{innokom => ti/omap5_evm}/Makefile           |   12 +-
>  board/ti/omap5_evm/evm.c                           |  101 ++
>  board/ti/omap5_evm/mux_data.h                      |  275 +++++
>  board/ti/panda/Makefile                            |    2 -
>  board/ti/panda/panda.c                             |   27 +-
>  board/ti/panda/panda_mux_data.h                    |   54 +-
>  board/ti/sdp4430/Makefile                          |    4 +-
>  board/ti/sdp4430/sdp.c                             |   27 +-
>  board/ti/sdp4430/sdp4430_mux_data.h                |   53 +-
>  board/vpac270/vpac270.c                            |    9 +
>  boards.cfg                                         |   22 +-
>  common/usb.c                                       |   13 +-
>  doc/README.m28                                     |  223 ++++
>  drivers/dma/Makefile                               |    1 +
>  drivers/dma/apbh_dma.c                             |  691 +++++++++++
>  drivers/gpio/Makefile                              |    1 +
>  drivers/gpio/mxs_gpio.c                            |  136 ++
>  drivers/i2c/Makefile                               |    1 +
>  drivers/i2c/mxs_i2c.c                              |  246 ++++
>  drivers/mmc/Makefile                               |    1 +
>  drivers/mmc/mxsmmc.c                               |  351 ++++++
>  drivers/mmc/omap_hsmmc.c                           |   26 +-
>  drivers/mtd/nand/Makefile                          |    1 +
>  drivers/mtd/nand/mxs_nand.c                        | 1118
> +++++++++++++++++
>  drivers/mtd/onenand/Makefile                       |    4 +
>  drivers/mtd/onenand/onenand_base.c                 |   18 +-
>  drivers/mtd/onenand/onenand_spl.c                  |  146 +++
>  drivers/net/davinci_emac.c                         |   24 +-
>  drivers/net/fec_mxc.c                              |   44 +-
>  drivers/rtc/Makefile                               |    1 +
>  drivers/rtc/mxsrtc.c                               |   86 ++
>  drivers/serial/serial_pxa.c                        |  464 +++-----
>  drivers/spi/Makefile                               |    1 +
>  drivers/spi/mxs_spi.c                              |  186 +++
>  drivers/usb/host/Makefile                          |    1 +
>  drivers/usb/host/ehci-mxs.c                        |  154 +++
>  include/configs/VCMA9.h                            |    4 +
>  include/configs/csb226.h                           |  506 --------
>  include/configs/da850_am18xxevm.h                  |  245 ++++
>  include/configs/davinci_dm6467Tevm.h               |  163 +++
>  include/configs/davinci_dm6467evm.h                |    1 +
>  include/configs/devkit8000.h                       |    1 +
>  include/configs/innokom.h                          |  507 --------
>  include/configs/integratorap.h                     |    1 +
>  include/configs/integratorcp.h                     |    1 +
>  include/configs/m28evk.h                           |  303 +++++
>  include/configs/omap3_beagle.h                     |    2 +-
>  include/configs/omap4_common.h                     |    7 +-
>  include/configs/omap5_evm.h                        |  284 +++++
>  include/configs/pm9261.h                           |    3 +
>  include/configs/pm9263.h                           |    3 +
>  include/configs/pm9g45.h                           |    3 +
>  include/configs/vpac270.h                          |    3 +-
>  include/onenand_uboot.h                            |    3 +
>  spl/Makefile                                       |    4 +
>  tools/.gitignore                                   |    1 +
>  tools/Makefile                                     |    6 +
>  tools/mxsboot.c                                    |  684 +++++++++++
>  167 files changed, 21354 insertions(+), 6487 deletions(-)
>  delete mode 100644 arch/arm/cpu/arm926ejs/davinci/am1808_lowlevel.c
>  create mode 100644 arch/arm/cpu/arm926ejs/davinci/da850_lowlevel.c
>  rename {board/csb226 => arch/arm/cpu/arm926ejs/mx28}/Makefile (86%)
>  create mode 100644 arch/arm/cpu/arm926ejs/mx28/clock.c
>  create mode 100644 arch/arm/cpu/arm926ejs/mx28/iomux.c
>  create mode 100644 arch/arm/cpu/arm926ejs/mx28/mx28.c
>  create mode 100644 arch/arm/cpu/arm926ejs/mx28/timer.c
>  create mode 100644 arch/arm/cpu/armv7/omap-common/clocks-common.c
>  create mode 100644 arch/arm/cpu/armv7/omap-common/emif-common.c
>  create mode 100644 arch/arm/cpu/armv7/omap-common/hwinit-common.c
>  rename arch/arm/cpu/armv7/{omap4 => omap-common}/lowlevel_init.S (76%)
>  rename arch/arm/cpu/armv7/{omap4/mem.c => omap-common/mem-common.c} (100%)
>  delete mode 100644 arch/arm/cpu/armv7/omap4/board.c
>  create mode 100644 arch/arm/cpu/armv7/omap4/hwinit.c
>  delete mode 100644 arch/arm/cpu/armv7/omap4/omap4_mux_data.h
>  create mode 100644 arch/arm/cpu/armv7/omap5/Makefile
>  create mode 100644 arch/arm/cpu/armv7/omap5/clocks.c
>  create mode 100644 arch/arm/cpu/armv7/omap5/config.mk
>  create mode 100644 arch/arm/cpu/armv7/omap5/emif.c
>  create mode 100644 arch/arm/cpu/armv7/omap5/hwinit.c
>  create mode 100644 arch/arm/cpu/armv7/omap5/sdram_elpida.c
>  rename arch/arm/include/asm/arch-davinci/{am1808_lowlevel.h =>
> da850_lowlevel.h} (63%)
>  create mode 100644 arch/arm/include/asm/arch-mx28/clock.h
>  create mode 100644 arch/arm/include/asm/arch-mx28/dma.h
>  create mode 100644 arch/arm/include/asm/arch-mx28/gpio.h
>  create mode 100644 arch/arm/include/asm/arch-mx28/imx-regs.h
>  create mode 100644 arch/arm/include/asm/arch-mx28/iomux-mx28.h
>  create mode 100644 arch/arm/include/asm/arch-mx28/iomux.h
>  create mode 100644 arch/arm/include/asm/arch-mx28/regs-apbh.h
>  create mode 100644 arch/arm/include/asm/arch-mx28/regs-base.h
>  create mode 100644 arch/arm/include/asm/arch-mx28/regs-bch.h
>  create mode 100644 arch/arm/include/asm/arch-mx28/regs-clkctrl.h
>  create mode 100644 arch/arm/include/asm/arch-mx28/regs-common.h
>  create mode 100644 arch/arm/include/asm/arch-mx28/regs-gpmi.h
>  create mode 100644 arch/arm/include/asm/arch-mx28/regs-i2c.h
>  create mode 100644 arch/arm/include/asm/arch-mx28/regs-ocotp.h
>  create mode 100644 arch/arm/include/asm/arch-mx28/regs-pinctrl.h
>  create mode 100644 arch/arm/include/asm/arch-mx28/regs-power.h
>  create mode 100644 arch/arm/include/asm/arch-mx28/regs-rtc.h
>  create mode 100644 arch/arm/include/asm/arch-mx28/regs-ssp.h
>  create mode 100644 arch/arm/include/asm/arch-mx28/regs-timrot.h
>  create mode 100644 arch/arm/include/asm/arch-mx28/regs-usb.h
>  create mode 100644 arch/arm/include/asm/arch-mx28/regs-usbphy.h
>  create mode 100644 arch/arm/include/asm/arch-mx28/sys_proto.h
>  delete mode 100644 arch/arm/include/asm/arch-omap4/emif.h
>  rename arch/arm/include/asm/arch-omap4/{omap4.h => omap.h} (87%)
>  create mode 100644 arch/arm/include/asm/arch-omap5/clocks.h
>  create mode 100644 arch/arm/include/asm/arch-omap5/cpu.h
>  create mode 100644 arch/arm/include/asm/arch-omap5/gpio.h
>  create mode 100644 arch/arm/include/asm/arch-omap5/i2c.h
>  create mode 100644 arch/arm/include/asm/arch-omap5/mmc_host_def.h
>  create mode 100644 arch/arm/include/asm/arch-omap5/mux_omap5.h
>  create mode 100644 arch/arm/include/asm/arch-omap5/omap.h
>  create mode 100644 arch/arm/include/asm/arch-omap5/sys_proto.h
>  create mode 100644 arch/arm/include/asm/arch-pxa/regs-uart.h
>  create mode 100644 arch/arm/include/asm/emif.h
>  create mode 100644 board/armltd/integrator/arm-ebi.h
>  delete mode 100644 board/armltd/integrator/config.mk
>  create mode 100644 board/armltd/integrator/integrator-sc.h
>  delete mode 100644 board/csb226/csb226.c
>  delete mode 100644 board/csb226/flash.c
>  create mode 100644 board/denx/m28evk/Makefile
>  rename arch/arm/cpu/armv7/omap4/sys_info.c =>
> board/denx/m28evk/m28_init.h (53%)
>  create mode 100644 board/denx/m28evk/m28evk.c
>  create mode 100644 board/denx/m28evk/mem_init.c
>  create mode 100644 board/denx/m28evk/mmc_boot.c
>  create mode 100644 board/denx/m28evk/power_init.c
>  create mode 100644 board/denx/m28evk/start.S
>  create mode 100644 board/denx/m28evk/u-boot-spl.lds
>  create mode 100644 board/denx/m28evk/u-boot.bd
>  delete mode 100644 board/innokom/flash.c
>  delete mode 100644 board/innokom/innokom.c
>  rename board/{innokom => ti/omap5_evm}/Makefile (86%)
>  create mode 100644 board/ti/omap5_evm/evm.c
>  create mode 100644 board/ti/omap5_evm/mux_data.h
>  create mode 100644 doc/README.m28
>  create mode 100644 drivers/dma/apbh_dma.c
>  create mode 100644 drivers/gpio/mxs_gpio.c
>  create mode 100644 drivers/i2c/mxs_i2c.c
>  create mode 100644 drivers/mmc/mxsmmc.c
>  create mode 100644 drivers/mtd/nand/mxs_nand.c
>  create mode 100644 drivers/mtd/onenand/onenand_spl.c
>  create mode 100644 drivers/rtc/mxsrtc.c
>  create mode 100644 drivers/spi/mxs_spi.c
>  create mode 100644 drivers/usb/host/ehci-mxs.c
>  delete mode 100644 include/configs/csb226.h
>  create mode 100644 include/configs/da850_am18xxevm.h
>  create mode 100644 include/configs/davinci_dm6467Tevm.h
>  delete mode 100644 include/configs/innokom.h
>  create mode 100644 include/configs/m28evk.h
>  create mode 100644 include/configs/omap5_evm.h
>  create mode 100644 tools/mxsboot.c
>
> Amicalement,
> --
> Albert.
> _______________________________________________
> U-Boot mailing list
> U-Boot@lists.denx.de
> http://lists.denx.de/mailman/listinfo/u-boot
>
Marek Vasut - Nov. 16, 2011, 2:27 a.m.
> Hi Albert,
> 
> On Tue, Nov 15, 2011 at 1:28 PM, Albert ARIBAUD
> 
> <albert.u.boot@aribaud.net> wrote:
> > Hi Wolfgang,
> > 
> > The following changes since commit
> > 5721385b187b3154c7768e6c182501022f4e2e45:
> > 
> >   Merge branch 'master' of git://git.denx.de/u-boot-mpc83xx (2011-11-08
> > 07:44:52 +0100)
> > 
> > are available in the git repository at:
> > 
> >   git://git.denx.de/u-boot-arm.git master
> 
> As with the last pull request, I don't see the Tegra patches in your
> list here. Is the problem that we don't have our own Tegra maintainer?
> 
> Please can you suggest what we can do here to get things moving?

CCing Wolfgang.

It'd be good to get a tegra maintainer -- suggestions?

M
Simon Glass - Nov. 16, 2011, 3:45 a.m.
Hi,

On Tue, Nov 15, 2011 at 6:27 PM, Marek Vasut <marek.vasut@gmail.com> wrote:
>> Hi Albert,
>>
>> On Tue, Nov 15, 2011 at 1:28 PM, Albert ARIBAUD
>>
>> <albert.u.boot@aribaud.net> wrote:
>> > Hi Wolfgang,
>> >
>> > The following changes since commit
>> > 5721385b187b3154c7768e6c182501022f4e2e45:
>> >
>> >   Merge branch 'master' of git://git.denx.de/u-boot-mpc83xx (2011-11-08
>> > 07:44:52 +0100)
>> >
>> > are available in the git repository at:
>> >
>> >   git://git.denx.de/u-boot-arm.git master
>>
>> As with the last pull request, I don't see the Tegra patches in your
>> list here. Is the problem that we don't have our own Tegra maintainer?
>>
>> Please can you suggest what we can do here to get things moving?
>
> CCing Wolfgang.
>
> It'd be good to get a tegra maintainer -- suggestions?

+Mike also who has helped reviewing some of this and might have ideas.

If there is no better candidate I am happy to act as Tegra maintainer
in the meantime (say 3 months) if it will help reduce workload on
Albert. The main thing is to get things moving and I'm happy to help
any way I can. There seems to be an enormous amount of activity in
U-Boot at the moment, which is great, but it does create a load on the
maintainers, particularly Wolfgang and Albert.

Regards,
Simon

>
> M
>
Mike Frysinger - Nov. 16, 2011, 3:53 a.m.
On Tuesday 15 November 2011 22:45:52 Simon Glass wrote:
> On Tue, Nov 15, 2011 at 6:27 PM, Marek Vasut wrote:
> >> On Tue, Nov 15, 2011 at 1:28 PM, Albert ARIBAUD wrote:
> >> > Hi Wolfgang,
> >> > 
> >> > The following changes since commit
> >> > 5721385b187b3154c7768e6c182501022f4e2e45:
> >> > 
> >> >   Merge branch 'master' of git://git.denx.de/u-boot-mpc83xx
> >> > (2011-11-08 07:44:52 +0100)
> >> > 
> >> > are available in the git repository at:
> >> > 
> >> >   git://git.denx.de/u-boot-arm.git master
> >> 
> >> As with the last pull request, I don't see the Tegra patches in your
> >> list here. Is the problem that we don't have our own Tegra maintainer?
> >> 
> >> Please can you suggest what we can do here to get things moving?
> > 
> > CCing Wolfgang.
> > 
> > It'd be good to get a tegra maintainer -- suggestions?
> 
> +Mike also who has helped reviewing some of this and might have ideas.

i thought Albert said he didn't want this last time we explicitly asked about 
creating an arm/tegra sub-arch tree ...

i think there should be one
-mike
Simon Glass - Nov. 16, 2011, 4:05 a.m.
Hi Mike,

On Tue, Nov 15, 2011 at 7:53 PM, Mike Frysinger <vapier@gentoo.org> wrote:
> On Tuesday 15 November 2011 22:45:52 Simon Glass wrote:
>> On Tue, Nov 15, 2011 at 6:27 PM, Marek Vasut wrote:
>> >> On Tue, Nov 15, 2011 at 1:28 PM, Albert ARIBAUD wrote:
>> >> > Hi Wolfgang,
>> >> >
>> >> > The following changes since commit
>> >> > 5721385b187b3154c7768e6c182501022f4e2e45:
>> >> >
>> >> >   Merge branch 'master' of git://git.denx.de/u-boot-mpc83xx
>> >> > (2011-11-08 07:44:52 +0100)
>> >> >
>> >> > are available in the git repository at:
>> >> >
>> >> >   git://git.denx.de/u-boot-arm.git master
>> >>
>> >> As with the last pull request, I don't see the Tegra patches in your
>> >> list here. Is the problem that we don't have our own Tegra maintainer?
>> >>
>> >> Please can you suggest what we can do here to get things moving?
>> >
>> > CCing Wolfgang.
>> >
>> > It'd be good to get a tegra maintainer -- suggestions?
>>
>> +Mike also who has helped reviewing some of this and might have ideas.
>
> i thought Albert said he didn't want this last time we explicitly asked about
> creating an arm/tegra sub-arch tree ...
>
> i think there should be one
> -mike
>

Yes, I found it, you said:

>> if people dont care either way, we can just set up a u-boot/u-boot-tegra.git
>> tree for Albert to pull from

and Albert replied:

> Seems like people don't care, and I'm fine with applying the patches myself, but I don't want to pull from a tree: I'll apply the patches as they appear on patchwork.

We have built up quite a large number of patches which are currently
sitting in the Chromium tree - something like 200. If we continue to
dribble these out at 10-20 a month it will take a while. Current
mainline U-Boot support for Tegra is pretty basic, but with these
patches it is pretty slick. It would be great to take advantage of the
oppty at the moment to upstream this material. Tegra 30 is already
starting to get into the kernel and I feel U-Boot is behind! We are
the boot loader. We need to be ahead :-)

Regards,
Simon
Heiko Schocher - Nov. 16, 2011, 6:28 a.m.
Hello Albert,

Albert ARIBAUD wrote:
> Hi Wolfgang,
> 
> The following changes since commit 5721385b187b3154c7768e6c182501022f4e2e45:
> 
>    Merge branch 'master' of git://git.denx.de/u-boot-mpc83xx (2011-11-08 
> 07:44:52 +0100)
> 
> are available in the git repository at:
> 
>    git://git.denx.de/u-boot-arm.git master
> 
[...]
> Heiko Schocher (3):
>        arm, davinci: da850/dm365 lowlevel cleanup
>        arm, davinci_emac: fix driver bug if more then 3 PHYs are detected
>        arm, davinci: add DAVINCI_MMC_CLKID

missing here this patch:

[U-Boot,1/2] arm, arm926ejs: always do cpu critical inits
http://patchwork.ozlabs.org/patch/124787/

Did you found time to look at it?

bye,
Heiko
Wolfgang Denk - Nov. 16, 2011, 7:24 p.m.
Dear Simon Glass,

In message <CAPnjgZ0PO2ZdcGhtD-dt0PNv3G6sFDzZjsUTL_-6v1wQ10ASzw@mail.gmail.com> you wrote:
> 
> We have built up quite a large number of patches which are currently
> sitting in the Chromium tree - something like 200. If we continue to
> dribble these out at 10-20 a month it will take a while. Current
> mainline U-Boot support for Tegra is pretty basic, but with these
> patches it is pretty slick. It would be great to take advantage of the
> oppty at the moment to upstream this material. Tegra 30 is already
> starting to get into the kernel and I feel U-Boot is behind! We are
> the boot loader. We need to be ahead :-)

Then let's try out this new u-boot-staging thing [1].  I suggest
somebody (not the original poster, of course) reviews and pushes the
stuff into a branch in this repo, and sends then a pull request to
Albert.  Either it works better, or else not much is lost either.

[1] http://article.gmane.org/gmane.comp.boot-loaders.u-boot/117084

Best regards,

Wolfgang Denk
Albert ARIBAUD - Nov. 17, 2011, 1:45 p.m.
Hi Mike,

Le 16/11/2011 04:53, Mike Frysinger a écrit :

> i thought Albert said he didn't want this last time we explicitly asked about
> creating an arm/tegra sub-arch tree ...
>
> i think there should be one
> -mike

Uhm, no, I don't think I said I was against creating a Tegra U-Boot 
repo. What I may have said is that I don't want to fetch from a repo 
located somewhere else that on the Denx git server. If a u-boot-tegra 
repo is created on the Denx server, I'll be happy to pull from it.

Amicalement,
Mike Frysinger - Nov. 17, 2011, 9:39 p.m.
On Thursday 17 November 2011 08:45:21 Albert ARIBAUD wrote:
> Le 16/11/2011 04:53, Mike Frysinger a écrit :
> > i thought Albert said he didn't want this last time we explicitly asked
> > about creating an arm/tegra sub-arch tree ...
> > 
> > i think there should be one
> 
> Uhm, no, I don't think I said I was against creating a Tegra U-Boot
> repo. What I may have said is that I don't want to fetch from a repo
> located somewhere else that on the Denx git server. If a u-boot-tegra
> repo is created on the Denx server, I'll be happy to pull from it.

i don't think we ever suggested the repo would be anywhere other than on the 
denx site, and i don't recall your response including "external to denx" 
qualifiers.  but let's skip the semantics and on to the end game.

i think we need Wolfgang's support for setting up the repo.  i don't think 
denx is running anything like gitolite for people to admin repos via ssh.

we need one name i think as the goto guy for the repo.  i don't know of any 
other repo that allows more than one person to push to it, but i don't see a 
problem with allowing more than one ...
-mike
Wolfgang Denk - Nov. 17, 2011, 9:56 p.m.
Dear Mike Frysinger,

In message <201111171639.19645.vapier@gentoo.org> you wrote:
>
> i think we need Wolfgang's support for setting up the repo.  i don't think 

No problem with that.  u-boot-tegra ? u-boot-tegra2 ? or ... ?

> denx is running anything like gitolite for people to admin repos via ssh.

No.

> we need one name i think as the goto guy for the repo.  i don't know of any 
> other repo that allows more than one person to push to it, but i don't see a 
> problem with allowing more than one ...

Actually there are a few, even though this is not broadly announced -
except for u-boot-staging, where all custodians have access.

Best regards,

Wolfgang Denk
Albert ARIBAUD - Nov. 17, 2011, 10:03 p.m.
Hi Wolfgang, Mike,

Le 17/11/2011 22:56, Wolfgang Denk a écrit :
> Dear Mike Frysinger,
>
> In message<201111171639.19645.vapier@gentoo.org>  you wrote:
>>
>> i think we need Wolfgang's support for setting up the repo.  i don't think
>
> No problem with that.  u-boot-tegra ? u-boot-tegra2 ? or ... ?

Simon will probably be better placed for answering. Personally I prefer 
boot-tegra if tegra and tegra2 have much in common.

> Best regards,
>
> Wolfgang Denk

Amicalement,
Simon Glass - Nov. 17, 2011, 10:04 p.m.
Hi,

On Thu, Nov 17, 2011 at 2:03 PM, Tom Warren <TWarren@nvidia.com> wrote:
> Wolfgang,
>
>> -----Original Message-----
>> From: Stephen Warren
>> Sent: Thursday, November 17, 2011 2:59 PM
>> To: Wolfgang Denk; Mike Frysinger
>> Cc: Albert ARIBAUD; Simon Glass; Marek Vasut; u-boot@lists.denx.de; Tom
>> Warren
>> Subject: RE: [U-Boot] Pull request: u-boot-arm/master
>>
>> Wolfgang Denk wrote at Thursday, November 17, 2011 2:57 PM:
>> > In message <201111171639.19645.vapier@gentoo.org> you wrote:
>> > >
>> > > i think we need Wolfgang's support for setting up the repo.  i don't
>> > > think
>> >
>> > No problem with that.  u-boot-tegra ? u-boot-tegra2 ? or ... ?
>>
>> u-boot-tegra would be better than u-boot-tegra2; there's already Tegra 3,
>> and I hope that's not /too/ far off going upstream.
>
> u-boot-tegra. Tegra3 to follow before EOY (I hope), and others after that ...

u-boot-tegra it is!

Regards,
Simon

>
> Make me the custodian for now. I'll give you more names of other NVidians that will need push access later, if that's alright.
>
> Thanks,
>
> Tom
>>
>> --
>> nvpublic
>
>