[GIT,PULL,5/6] i.MX arm64 DTS update for 5.7
mbox series

Message ID 20200318051918.32579-5-shawnguo@kernel.org
State New
Headers show
  • [GIT,PULL,1/6] i.MX drivers update for 5.7
Related show


git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux.git tags/imx-dt64-5.7


Shawn Guo March 18, 2020, 5:19 a.m. UTC

To resolve dependency on new clock, this request is built on the
following commit from clk tree.

  16e71d4da799 ("clk: imx8mn: add SNVS clock to clock tree")

I have been asking Stephen to keep it stable.  Please consider to pull
for 5.7.  Thanks!


The following changes since commit 16e71d4da7999ddef87f5ba2274d77da0cab2772:

  clk: imx8mn: add SNVS clock to clock tree (2020-02-13 11:08:30 +0800)

are available in the Git repository at:

  git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux.git tags/imx-dt64-5.7

for you to fetch changes up to 630952e1f816814e2fafbbaecfe90bcfe3e117d3:

  arm64: dts: ls1028a: disable the felix switch by default (2020-03-16 16:16:00 +0800)

i.MX arm64 DTS update for 5.7:

 - New support for Kontron LS1028A based boards and NXP i.MX8MP EVK.
 - Add Ethernet PHY reset GPIO for imx8mm-evk and imx8mq-evk board.
 - Add gpio-fan, thermal and Ethernet support for imx8mq-phanbell board.
 - Add SNVS clock description to pwrkey device for i.MX8 SoCs.
 - A number of updates on librem5-devkit board to add audio, proximity
   sensor, lsm9ds1 mount matrix support, and improve WoWWAN, DVFS, SD
   devices as well.
 - A series of patches from Anson Huang to update i.MX8 EVK boards
   for support of I2C PCA6416, thermal, GPIO LED, OPP table etc.
 - Add PCIe device nodes for LX2160A and LS1028A SoC.
 - Add FSPI deivce support for LX2160A evaluation boards.
 - Add EEPROM and LTC3882 regulator support for lx2160a-cex7 board.
 - Other small and random updates on LS1028A and i.MX8 support.

Adam Ford (1):
      arm64: dts: enable fspi in imx8mm dts

Alifer Moraes (4):
      arm64: dts: imx8mq-phanbell: Add support for ethernet
      arm64: dts: imx8mm-evk: add phy-reset-gpios for fec1
      arm64: dts: imx8mq-evk: add phy-reset-gpios for fec1
      arm64: dts: imx8mq-phanbell: Fix Ethernet PHY post-reset duration

André Draszik (2):
      arm64: dts: imx8mm: add snvs clock to pwrkey
      arm64: dts: imx8mq: add snvs clock to pwrkey

Angus Ainslie (Purism) (7):
      arm64: dts: librem5-devkit: add a vbus supply to usb0
      arm64: dts: librem5-devkit: add the sgtl5000 i2c audio codec
      arm64: dts: librem5-devkit: add the simcom 7100 modem and audio
      arm64: dts: librem5-devkit: allow modem to wake the system from suspend
      arm64: dts: librem5-devkit: add the regulators for DVFS
      arm64: dts: librem5-devkit: allow the redpine card to be removed
      arm64: dts: librem5-devkit: increase the VBUS current in the kernel

Anson Huang (16):
      arm64: dts: freescale: Add i.MX8MP dtsi support
      arm64: dts: freescale: Add i.MX8MP EVK board support
      arm64: dts: imx8mp-evk: Add GPIO LED support
      arm64: dts: imx8mp: Add system counter timer node
      arm64: dts: imx8mn: Adjust 1.2GHz OPP voltage to OD mode
      arm64: dts: imx: add i.MX8QXP thermal support
      arm64: dts: imx8mq: Align iomuxc node name
      arm64: dts: imx8mp: Add src node
      arm64: dts: imx8mn-evk: Add i2c3 support
      arm64: dts: imx8mn-evk: Enable pca6416 on i2c3 bus
      arm64: dts: imx8mp-evk: Add i2c3 support
      arm64: dts: imx8mp-evk: Enable pca6416 on i2c3 bus
      arm64: dts: imx8mm: Add thermal zone support
      arm64: dts: imx8mn: Add CPU thermal zone support
      arm64: dts: imx8mn: Add snvs clock to powerkey
      arm64: dts: imx8mp: Add snvs clock to powerkey

Claudiu Manoil (2):
      arm64: dts: ls1028a: add node for Felix switch
      arm64: dts: ls1028a: enable switch PHYs on RDB

Guido Günther (1):
      arm64: dts: imx8mq-librem5-devkit: Add proximity sensor

Horia Geantă (2):
      arm64: dts: imx8mn: add clock for snvs rtc node
      arm64: dts: imx8mp: add crypto node

Hou Zhiqiang (2):
      arm64: dts: lx2160a: Add PCIe controller DT nodes
      arm64: dts: layerscape: add iommu-map property to pci nodes

Kuldeep Singh (2):
      arm64: dts: lx2160ardb: Update FSPI node properties
      arm64: dts: lx2160aqds: Add FSPI node properties

Martin Kepplinger (1):
      arm64: dts: librem5-devkit: add lsm9ds1 mount matrix

Michael Walle (8):
      arm64: dts: freescale: add Kontron sl28 support
      arm64: dts: ls1028a: add missing SPI nodes
      arm64: dts: ls1028: sl28: explicitly enable network ports
      arm64: dts: freescale: sl28: add SPI flash
      arm64: dts: ls1028a: sl28: fix on-board EEPROMS
      arm64: dts: ls1028a: sl28: expose switch ports in KBox A-230-LS
      arm64: dts: ls1028a: sl28: add support for variant 2
      arm64: dts: ls1028a: disable the felix switch by default

Peng Fan (4):
      arm64: dts: imx8mn: Init rates and parents configs for clocks
      arm64: dts: freescale: s32v234: use generic name bus
      arm64: dts: imx8mm: drop redundant interrupt-parent
      arm64: dts: imx8m: fix aips dts node

Rabeeh Khoury (1):
      arm64: dts: lx2160a-cex7: add on-module eeproms

Russell King (1):
      arm64: dts: lx2160a-cex7: add support for ltc3882 regulator

Silvano di Ninno (1):
      arm64: dts: imx8mn: align name for crypto child nodes

Vitor Massaru Iha (1):
      arm64: dts: imx8mq-phanbell: Add gpio-fan/thermal support

Vladimir Oltean (2):
      arm64: dts: ls1028a: delete extraneous #interrupt-cells for ENETC RCIE
      arm64: dts: ls1028a: disable all enetc ports by default

Xiaowei Bao (1):
      arm64: dts: ls1028a: Add PCIe controller DT nodes

Yangbo Lu (2):
      arm64: dts: ls1088a: support eMMC HS200 speed mode for RDB board
      arm64: dts: ls1028a: support external trigger timestamp fifo of PTP timer

 arch/arm64/boot/dts/freescale/Makefile             |   6 +
 .../fsl-ls1028a-kontron-kbox-a-230-ls.dts          |  91 ++
 .../freescale/fsl-ls1028a-kontron-sl28-var2.dts    |  72 ++
 .../fsl-ls1028a-kontron-sl28-var3-ads2.dts         | 117 +++
 .../freescale/fsl-ls1028a-kontron-sl28-var4.dts    |  51 ++
 .../dts/freescale/fsl-ls1028a-kontron-sl28.dts     | 187 +++++
 arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts  |   1 +
 arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts  |  65 +-
 arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi     | 184 +++-
 arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts  |   1 +
 arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi     |   4 +
 arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi     |   4 +
 .../arm64/boot/dts/freescale/fsl-lx2160a-cex7.dtsi |  37 +
 arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts  |  15 +
 arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts  |   4 +-
 arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi     | 168 ++++
 arch/arm64/boot/dts/freescale/imx8mm-evk.dts       |   2 +
 arch/arm64/boot/dts/freescale/imx8mm.dtsi          |  74 +-
 arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi      |  21 +
 arch/arm64/boot/dts/freescale/imx8mn.dtsi          |  81 +-
 arch/arm64/boot/dts/freescale/imx8mp-evk.dts       | 270 ++++++
 arch/arm64/boot/dts/freescale/imx8mp-pinfunc.h     | 931 +++++++++++++++++++++
 arch/arm64/boot/dts/freescale/imx8mp.dtsi          | 654 +++++++++++++++
 arch/arm64/boot/dts/freescale/imx8mq-evk.dts       |   2 +
 .../boot/dts/freescale/imx8mq-librem5-devkit.dts   | 148 +++-
 arch/arm64/boot/dts/freescale/imx8mq-phanbell.dts  | 104 +++
 arch/arm64/boot/dts/freescale/imx8mq.dtsi          |  18 +-
 arch/arm64/boot/dts/freescale/imx8qxp.dtsi         |  39 +
 arch/arm64/boot/dts/freescale/s32v234.dtsi         |   4 +-
 29 files changed, 3320 insertions(+), 35 deletions(-)
 create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-kbox-a-230-ls.dts
 create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var2.dts
 create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var3-ads2.dts
 create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var4.dts
 create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts
 create mode 100644 arch/arm64/boot/dts/freescale/imx8mp-evk.dts
 create mode 100644 arch/arm64/boot/dts/freescale/imx8mp-pinfunc.h
 create mode 100644 arch/arm64/boot/dts/freescale/imx8mp.dtsi