new file mode 100644
@@ -0,0 +1,263 @@
+General
+=======
+
+A qcow2 image file is organized in units of constant size, which are called
+(host) clusters. A cluster is the unit in which all allocations are done,
+both for actual guest data and for image metadata.
+
+Likewise, the virtual disk as seen by the guest is divided into (guest)
+clusters of the same size.
+
+All numbers in qcow2 are stored in Big Endian byte order.
+
+Header
+======
+
+The first cluster of a qcow2 image contains the file header:
+
+ Byte 0 - 3: magic
+ QCOW magic string ("QFI\xfb")
+
+ 4 - 7: version
+ Version number (only valid value is 2)
+
+ 8 - 15: backing_file_offset
+ Offset into the image file at which the backing file name
+ is stored (NB: The string is not null terminated). 0 if the
+ image doesn't have a backing file.
+
+ 16 - 19: backing_file_size
+ Length of the backing file name in bytes. Must not be
+ longer than 1023 bytes. Undefined if the image doesn't have
+ a backing file.
+
+ 20 - 23: cluster_bits
+ Number of bits that are used for addressing an offset
+ within a cluster (1 << cluster_bits is the cluster size).
+ Must not be less than 9 (i.e. 512 byte clusters).
+
+ Note: qemu as of today has an implementation limit of 2 MB
+ as the maximum cluster size and won't be able to open images
+ with larger cluster sizes.
+
+ 24 - 31: size
+ Virtual disk size in bytes
+
+ 32 - 35: crypt_method
+ 0 for no encryption
+ 1 for AES encryption
+
+ 36 - 39: l1_size
+ Number of entries in the active L1 table
+
+ 40 - 47: l1_table_offset
+ Offset into the image file at which the active L1 table
+ starts. Must be aligned to a cluster boundary.
+
+ 48 - 55: refcount_table_offset
+ Offset into the image file at which the refcount table
+ starts. Must be aligned to a cluster boundary.
+
+ 56 - 59: refcount_table_clusters
+ Number of clusters that the refcount table occupies
+
+ 60 - 63: nb_snapshots
+ Number of snapshots contained in the image
+
+ 64 - 71: snapshots_offset
+ Offset into the image file at which the snapshot table
+ starts. Must be aligned to a cluster boundary.
+
+Directly after the image header, optional sections called header extensions can
+be stored. Each extension has a structure like the following:
+
+ Byte 0 - 3: Header extension type:
+ 0x00000000 - End of the header extension area
+ 0xE2792ACA - Backing file format name
+ other - Unknown header extension, can be safely
+ ignored
+
+ 4 - 7: Length of the header extension data
+
+ 8 - n: Header extension data
+
+ n - m: Padding to round up the header extension size to the next
+ multiple of 8.
+
+The remaining space between the end of the header extension area and the end of
+the first cluster can be used for other data. Usually, the backing file name is
+stored there.
+
+
+Host cluster management
+=======================
+
+qcow2 manages the allocation of host clusters by maintaining a reference count
+for each host cluster. A refcount of 0 means that the cluster is free, 1 means
+that it is used, and >= 2 means that it is used and any write access must
+perform a COW (copy on write) operation.
+
+The refcounts are managed in a two-level table. The first level is called
+refcount table and has a variable size (which is stored in the header). The
+refcount table can cover multiple clusters, however it needs to be contiguous
+in the image file.
+
+It contains pointers to the second level structures which are called refcount
+blocks and are exactly one cluster in size.
+
+Given a offset into the image file, the refcount of its cluster can be obtained
+as follows:
+
+ refcount_block_entries = (cluster_size / sizeof(uint16_t))
+
+ refcount_block_index = (offset / cluster_size) % refcount_block_entries
+ refcount_table_index = (offset / cluster_size) / refcount_block_entries
+
+ refcount_block = load_cluster(refcount_table[refcount_table_index]);
+ return refcount_block[refcount_block_index];
+
+Refcount table entry:
+
+ Bit 0 - 8: Reserved (set to 0)
+
+ 9 - 63: Bits 9-63 of the offset into the image file at which the
+ refcount block starts. Must be aligned to a cluster
+ boundary.
+
+ If this is 0, the corresponding refcount block has not yet
+ been allocated. All refcounts managed by this refcount block
+ are 0.
+
+Refcount block entry:
+
+ Bit 0 - 15: Reference count of the cluster
+
+
+Cluster mapping
+===============
+
+Just as for refcounts, qcow2 uses a two-level structure for the mapping of
+guest clusters to host clusters. They are called L1 and L2 table.
+
+The L1 table has a variable size (stored in the header) and may use multiple
+clusters, however it must be contiguous in the image file. L2 tables are
+exactly one cluster in size.
+
+Given a offset into the virtual disk, the offset into the image file can be
+obtained as follows:
+
+ l2_entries = (cluster_size / sizeof(uint64_t))
+
+ l2_index = (offset / cluster_size) % l2_entries
+ l1_index = (offset / cluster_size) / l2_entries
+
+ l2_table = load_cluster(l1_table[l1_index]);
+ cluster_offset = l2_table[l2_index];
+
+ return cluster_offset + (offset % cluster_size)
+
+L1 table entry:
+
+ Bit 0 - 8: Reserved (set to 0)
+
+ 9 - 55: Bits 9-55 of the offset into the image file at which the L2
+ table starts. Must be aligned to a cluster boundary. If the
+ offset is 0, the L2 table and all clusters described by this
+ L2 table are unallocated.
+
+ 56 - 62: Reserved (set to 0)
+
+ 63: 0 for an L2 table that is unused or requires COW, 1 if its
+ refcount is exactly one. This information is only accurate
+ in the active L1 table.
+
+L2 table entry (for normal clusters):
+
+ Bit 0 - 8: Reserved (set to 0)
+
+ 9 - 55: Bits 9-55 of host cluster offset. Must be aligned to a
+ cluster boundary. If the offset is 0, the cluster is
+ unallocated.
+
+ 56 - 61: Reserved (set to 0)
+
+ 62: 0 (this cluster is not compressed)
+
+ 63: 0 for a cluster that is unused or requires COW, 1 if its
+ refcount is exactly one. This information is only accurate
+ in L2 tables that are reachable from the the active L1
+ table.
+
+L2 table entry (for compressed clusters; x = 62 - (cluster_size - 8)):
+
+ Bit 0 - x: Host cluster offset. This is usually _not_ aligned to a
+ cluster boundary!
+
+ x+1 - 61: Compressed size of the images in sectors of 512 bytes
+
+ 62: 1 (this cluster is compressed using zlib)
+
+ 63: 0 for a cluster that is unused or requires COW, 1 if its
+ refcount is exactly one. This information is only accurate
+ in L2 tables that are reachable from the the active L1
+ table.
+
+If a cluster is unallocated, read requests shall read the data from the backing
+file. If there is no backing file or the backing file is smaller than the image,
+they shall read zeros for all parts that are not covered by the backing file.
+
+Snapshots
+=========
+
+qcow2 supports internal snapshots. Their basic principle of operation is to
+switch the active L1 table, so that a different set of host clusters are
+exposed to the guest.
+
+When creating a snapshot, the L1 table should be copied and the refcount of all
+L2 tables and clusters reachable from this L1 table must be increased, so that
+a write causes a COW and isn't visible in other snapshots.
+
+When loading a snapshot, bit 63 of all entries in the new active L1 table and
+all L2 tables referenced by it must be reconstructed from the refcount table
+as it doesn't need to be accurate in inactive L1 tables.
+
+A directory of all snapshots is stored in the snapshot table, a contiguous area
+in the image file, whose starting offset and length are given by the header
+fields snapshots_offset and nb_snapshots. The entries of the snapshot table
+have variable length, depending on the length of ID, name and extra data.
+
+Snapshot table entry:
+
+ Byte 0 - 7: Offset into the image file at which the L1 table for the
+ snapshot starts. Must be aligned to a cluster boundary.
+
+ 8 - 11: Number of entries in the L1 table of the snapshots
+
+ 12 - 13: Length of the unique ID string describing the snapshot
+
+ 14 - 15: Length of the name of the snapshot
+
+ 16 - 19: Time at which the snapshot was taken in seconds since the
+ Epoch
+
+ 20 - 23: Subsecond part of the time at which the snapshot was taken
+ in nanoseconds
+
+ 24 - 31: Time that the guest was running until the snapshot was
+ taken in nanoseconds
+
+ 32 - 35: Size of the VM state in bytes. 0 if no VM state is saved.
+ If there is VM state, it starts at the first cluster
+ described by first L1 table entry that doesn't describe a
+ regular guest cluster (i.e. VM state is stored like guest
+ disk content, except that it is stored at offsets that are
+ larger than the virtual disk presented to the guest)
+
+ 36 - 39: Size of extra data in the table entry (used for future
+ extensions of the format)
+
+ variable: Extra data for future extensions. Must be ignored.
+
+ variable: Unique ID string for the snapshot (not null terminated)
+
+ variable: Name of the snapshot (not null terminated)
deleted file mode 100644
@@ -1,260 +0,0 @@
-== General ==
-
-A qcow2 image file is organized in units of constant size, which are called
-(host) clusters. A cluster is the unit in which all allocations are done,
-both for actual guest data and for image metadata.
-
-Likewise, the virtual disk as seen by the guest is divided into (guest)
-clusters of the same size.
-
-All numbers in qcow2 are stored in Big Endian byte order.
-
-
-== Header ==
-
-The first cluster of a qcow2 image contains the file header:
-
- Byte 0 - 3: magic
- QCOW magic string ("QFI\xfb")
-
- 4 - 7: version
- Version number (only valid value is 2)
-
- 8 - 15: backing_file_offset
- Offset into the image file at which the backing file name
- is stored (NB: The string is not null terminated). 0 if the
- image doesn't have a backing file.
-
- 16 - 19: backing_file_size
- Length of the backing file name in bytes. Must not be
- longer than 1023 bytes. Undefined if the image doesn't have
- a backing file.
-
- 20 - 23: cluster_bits
- Number of bits that are used for addressing an offset
- within a cluster (1 << cluster_bits is the cluster size).
- Must not be less than 9 (i.e. 512 byte clusters).
-
- Note: qemu as of today has an implementation limit of 2 MB
- as the maximum cluster size and won't be able to open images
- with larger cluster sizes.
-
- 24 - 31: size
- Virtual disk size in bytes
-
- 32 - 35: crypt_method
- 0 for no encryption
- 1 for AES encryption
-
- 36 - 39: l1_size
- Number of entries in the active L1 table
-
- 40 - 47: l1_table_offset
- Offset into the image file at which the active L1 table
- starts. Must be aligned to a cluster boundary.
-
- 48 - 55: refcount_table_offset
- Offset into the image file at which the refcount table
- starts. Must be aligned to a cluster boundary.
-
- 56 - 59: refcount_table_clusters
- Number of clusters that the refcount table occupies
-
- 60 - 63: nb_snapshots
- Number of snapshots contained in the image
-
- 64 - 71: snapshots_offset
- Offset into the image file at which the snapshot table
- starts. Must be aligned to a cluster boundary.
-
-Directly after the image header, optional sections called header extensions can
-be stored. Each extension has a structure like the following:
-
- Byte 0 - 3: Header extension type:
- 0x00000000 - End of the header extension area
- 0xE2792ACA - Backing file format name
- other - Unknown header extension, can be safely
- ignored
-
- 4 - 7: Length of the header extension data
-
- 8 - n: Header extension data
-
- n - m: Padding to round up the header extension size to the next
- multiple of 8.
-
-The remaining space between the end of the header extension area and the end of
-the first cluster can be used for other data. Usually, the backing file name is
-stored there.
-
-
-== Host cluster management ==
-
-qcow2 manages the allocation of host clusters by maintaining a reference count
-for each host cluster. A refcount of 0 means that the cluster is free, 1 means
-that it is used, and >= 2 means that it is used and any write access must
-perform a COW (copy on write) operation.
-
-The refcounts are managed in a two-level table. The first level is called
-refcount table and has a variable size (which is stored in the header). The
-refcount table can cover multiple clusters, however it needs to be contiguous
-in the image file.
-
-It contains pointers to the second level structures which are called refcount
-blocks and are exactly one cluster in size.
-
-Given a offset into the image file, the refcount of its cluster can be obtained
-as follows:
-
- refcount_block_entries = (cluster_size / sizeof(uint16_t))
-
- refcount_block_index = (offset / cluster_size) % refcount_block_entries
- refcount_table_index = (offset / cluster_size) / refcount_block_entries
-
- refcount_block = load_cluster(refcount_table[refcount_table_index]);
- return refcount_block[refcount_block_index];
-
-Refcount table entry:
-
- Bit 0 - 8: Reserved (set to 0)
-
- 9 - 63: Bits 9-63 of the offset into the image file at which the
- refcount block starts. Must be aligned to a cluster
- boundary.
-
- If this is 0, the corresponding refcount block has not yet
- been allocated. All refcounts managed by this refcount block
- are 0.
-
-Refcount block entry:
-
- Bit 0 - 15: Reference count of the cluster
-
-
-== Cluster mapping ==
-
-Just as for refcounts, qcow2 uses a two-level structure for the mapping of
-guest clusters to host clusters. They are called L1 and L2 table.
-
-The L1 table has a variable size (stored in the header) and may use multiple
-clusters, however it must be contiguous in the image file. L2 tables are
-exactly one cluster in size.
-
-Given a offset into the virtual disk, the offset into the image file can be
-obtained as follows:
-
- l2_entries = (cluster_size / sizeof(uint64_t))
-
- l2_index = (offset / cluster_size) % l2_entries
- l1_index = (offset / cluster_size) / l2_entries
-
- l2_table = load_cluster(l1_table[l1_index]);
- cluster_offset = l2_table[l2_index];
-
- return cluster_offset + (offset % cluster_size)
-
-L1 table entry:
-
- Bit 0 - 8: Reserved (set to 0)
-
- 9 - 55: Bits 9-55 of the offset into the image file at which the L2
- table starts. Must be aligned to a cluster boundary. If the
- offset is 0, the L2 table and all clusters described by this
- L2 table are unallocated.
-
- 56 - 62: Reserved (set to 0)
-
- 63: 0 for an L2 table that is unused or requires COW, 1 if its
- refcount is exactly one. This information is only accurate
- in the active L1 table.
-
-L2 table entry (for normal clusters):
-
- Bit 0 - 8: Reserved (set to 0)
-
- 9 - 55: Bits 9-55 of host cluster offset. Must be aligned to a
- cluster boundary. If the offset is 0, the cluster is
- unallocated.
-
- 56 - 61: Reserved (set to 0)
-
- 62: 0 (this cluster is not compressed)
-
- 63: 0 for a cluster that is unused or requires COW, 1 if its
- refcount is exactly one. This information is only accurate
- in L2 tables that are reachable from the the active L1
- table.
-
-L2 table entry (for compressed clusters; x = 62 - (cluster_size - 8)):
-
- Bit 0 - x: Host cluster offset. This is usually _not_ aligned to a
- cluster boundary!
-
- x+1 - 61: Compressed size of the images in sectors of 512 bytes
-
- 62: 1 (this cluster is compressed using zlib)
-
- 63: 0 for a cluster that is unused or requires COW, 1 if its
- refcount is exactly one. This information is only accurate
- in L2 tables that are reachable from the the active L1
- table.
-
-If a cluster is unallocated, read requests shall read the data from the backing
-file. If there is no backing file or the backing file is smaller than the image,
-they shall read zeros for all parts that are not covered by the backing file.
-
-
-== Snapshots ==
-
-qcow2 supports internal snapshots. Their basic principle of operation is to
-switch the active L1 table, so that a different set of host clusters are
-exposed to the guest.
-
-When creating a snapshot, the L1 table should be copied and the refcount of all
-L2 tables and clusters reachable from this L1 table must be increased, so that
-a write causes a COW and isn't visible in other snapshots.
-
-When loading a snapshot, bit 63 of all entries in the new active L1 table and
-all L2 tables referenced by it must be reconstructed from the refcount table
-as it doesn't need to be accurate in inactive L1 tables.
-
-A directory of all snapshots is stored in the snapshot table, a contiguous area
-in the image file, whose starting offset and length are given by the header
-fields snapshots_offset and nb_snapshots. The entries of the snapshot table
-have variable length, depending on the length of ID, name and extra data.
-
-Snapshot table entry:
-
- Byte 0 - 7: Offset into the image file at which the L1 table for the
- snapshot starts. Must be aligned to a cluster boundary.
-
- 8 - 11: Number of entries in the L1 table of the snapshots
-
- 12 - 13: Length of the unique ID string describing the snapshot
-
- 14 - 15: Length of the name of the snapshot
-
- 16 - 19: Time at which the snapshot was taken in seconds since the
- Epoch
-
- 20 - 23: Subsecond part of the time at which the snapshot was taken
- in nanoseconds
-
- 24 - 31: Time that the guest was running until the snapshot was
- taken in nanoseconds
-
- 32 - 35: Size of the VM state in bytes. 0 if no VM state is saved.
- If there is VM state, it starts at the first cluster
- described by first L1 table entry that doesn't describe a
- regular guest cluster (i.e. VM state is stored like guest
- disk content, except that it is stored at offsets that are
- larger than the virtual disk presented to the guest)
-
- 36 - 39: Size of extra data in the table entry (used for future
- extensions of the format)
-
- variable: Extra data for future extensions. Must be ignored.
-
- variable: Unique ID string for the snapshot (not null terminated)
-
- variable: Name of the snapshot (not null terminated)
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> --- docs/specs/qcow2.md | 263 ++++++++++++++++++++++++++++++++++++++++++++++++++ docs/specs/qcow2.txt | 260 ------------------------------------------------- 2 files changed, 263 insertions(+), 260 deletions(-) create mode 100644 docs/specs/qcow2.md delete mode 100644 docs/specs/qcow2.txt