new file mode 100644
@@ -0,0 +1,191 @@
+/*
+ * MPC8544 Silicon/SoC Device Tree Source (post include)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&lbc {
+ #address-cells = <2>;
+ #size-cells = <1>;
+ compatible = "fsl,mpc8544-lbc", "fsl,pq3-localbus", "simple-bus";
+ interrupts = <19 2 0 0>;
+};
+
+/* controller at 0x8000 */
+&pci0 {
+ compatible = "fsl,mpc8540-pci";
+ device_type = "pci";
+ interrupts = <24 0x2 0 0>;
+ bus-range = <0 0xff>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+};
+
+/* controller at 0x9000 */
+&pci1 {
+ compatible = "fsl,mpc8548-pcie";
+ device_type = "pci";
+ #size-cells = <2>;
+ #address-cells = <3>;
+ bus-range = <0 255>;
+ clock-frequency = <33333333>;
+ interrupts = <25 2 0 0>;
+
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ interrupts = <25 2 0 0>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0000 0x0 0x0 0x1 &mpic 0x4 0x1 0x0 0x0
+ 0000 0x0 0x0 0x2 &mpic 0x5 0x1 0x0 0x0
+ 0000 0x0 0x0 0x3 &mpic 0x6 0x1 0x0 0x0
+ 0000 0x0 0x0 0x4 &mpic 0x7 0x1 0x0 0x0
+ >;
+ };
+};
+
+/* controller at 0xa000 */
+&pci2 {
+ compatible = "fsl,mpc8548-pcie";
+ device_type = "pci";
+ #size-cells = <2>;
+ #address-cells = <3>;
+ bus-range = <0 255>;
+ clock-frequency = <33333333>;
+ interrupts = <26 2 0 0>;
+
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ interrupts = <26 2 0 0>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0000 0x0 0x0 0x1 &mpic 0x0 0x1 0x0 0x0
+ 0000 0x0 0x0 0x2 &mpic 0x1 0x1 0x0 0x0
+ 0000 0x0 0x0 0x3 &mpic 0x2 0x1 0x0 0x0
+ 0000 0x0 0x0 0x4 &mpic 0x3 0x1 0x0 0x0
+ >;
+ };
+};
+
+/* controller at 0xb000 */
+&pci3 {
+ compatible = "fsl,mpc8548-pcie";
+ device_type = "pci";
+ #size-cells = <2>;
+ #address-cells = <3>;
+ bus-range = <0 255>;
+ clock-frequency = <33333333>;
+ interrupts = <27 2 0 0>;
+
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ interrupts = <27 2 0 0>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0000 0x0 0x0 0x1 &mpic 0x8 0x1 0x0 0x0
+ 0000 0x0 0x0 0x2 &mpic 0x9 0x1 0x0 0x0
+ 0000 0x0 0x0 0x3 &mpic 0xa 0x1 0x0 0x0
+ 0000 0x0 0x0 0x4 &mpic 0xb 0x1 0x0 0x0
+ >;
+ };
+};
+
+&soc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ device_type = "soc";
+ compatible = "fsl,mpc8544-immr", "simple-bus";
+ bus-frequency = <0>; // Filled out by uboot.
+
+ ecm-law@0 {
+ compatible = "fsl,ecm-law";
+ reg = <0x0 0x1000>;
+ fsl,num-laws = <10>;
+ };
+
+ ecm@1000 {
+ compatible = "fsl,mpc8544-ecm", "fsl,ecm";
+ reg = <0x1000 0x1000>;
+ interrupts = <17 2 0 0>;
+ };
+
+ memory-controller@2000 {
+ compatible = "fsl,mpc8544-memory-controller";
+ reg = <0x2000 0x1000>;
+ interrupts = <18 2 0 0>;
+ };
+
+/include/ "pq3-i2c-0.dtsi"
+/include/ "pq3-i2c-1.dtsi"
+/include/ "pq3-duart-0.dtsi"
+
+ L2: l2-cache-controller@20000 {
+ compatible = "fsl,mpc8544-l2-cache-controller";
+ reg = <0x20000 0x1000>;
+ cache-line-size = <32>; // 32 bytes
+ cache-size = <0x40000>; // L2, 256K
+ interrupts = <16 2 0 0>;
+ };
+
+/include/ "pq3-dma-0.dtsi"
+/include/ "pq3-etsec1-0.dtsi"
+/include/ "pq3-etsec1-2.dtsi"
+
+ ethernet@26000 {
+ cell-index = <1>;
+ };
+
+/include/ "pq3-sec2.1-0.dtsi"
+/include/ "pq3-mpic.dtsi"
+
+ global-utilities@e0000 {
+ compatible = "fsl,mpc8544-guts";
+ reg = <0xe0000 0x1000>;
+ fsl,has-rstcr;
+ };
+};
new file mode 100644
@@ -0,0 +1,63 @@
+/*
+ * MPC8544 Silicon/SoC Device Tree Source (pre include)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+/ {
+ compatible = "fsl,MPC8544";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ interrupt-parent = <&mpic>;
+
+ aliases {
+ serial0 = &serial0;
+ serial1 = &serial1;
+ ethernet0 = &enet0;
+ ethernet1 = &enet2;
+ pci0 = &pci0;
+ pci1 = &pci1;
+ pci2 = &pci2;
+ pci3 = &pci3;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ PowerPC,8544@0 {
+ device_type = "cpu";
+ reg = <0x0>;
+ next-level-cache = <&L2>;
+ };
+ };
+};
@@ -9,339 +9,52 @@
* option) any later version.
*/
-/dts-v1/;
+/include/ "fsl/mpc8544si-pre.dtsi"
+
/ {
model = "MPC8544DS";
compatible = "MPC8544DS", "MPC85xxDS";
- #address-cells = <1>;
- #size-cells = <1>;
-
- aliases {
- ethernet0 = &enet0;
- ethernet1 = &enet1;
- serial0 = &serial0;
- serial1 = &serial1;
- pci0 = &pci0;
- pci1 = &pci1;
- pci2 = &pci2;
- pci3 = &pci3;
- };
-
- cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-
- PowerPC,8544@0 {
- device_type = "cpu";
- reg = <0x0>;
- d-cache-line-size = <32>; // 32 bytes
- i-cache-line-size = <32>; // 32 bytes
- d-cache-size = <0x8000>; // L1, 32K
- i-cache-size = <0x8000>; // L1, 32K
- timebase-frequency = <0>;
- bus-frequency = <0>;
- clock-frequency = <0>;
- next-level-cache = <&L2>;
- };
- };
memory {
device_type = "memory";
- reg = <0x0 0x0>; // Filled by U-Boot
+ reg = <0 0 0 0>; // Filled by U-Boot
};
- soc8544@e0000000 {
- #address-cells = <1>;
- #size-cells = <1>;
- device_type = "soc";
- compatible = "simple-bus";
-
- ranges = <0x0 0xe0000000 0x100000>;
- bus-frequency = <0>; // Filled out by uboot.
-
- ecm-law@0 {
- compatible = "fsl,ecm-law";
- reg = <0x0 0x1000>;
- fsl,num-laws = <10>;
- };
-
- ecm@1000 {
- compatible = "fsl,mpc8544-ecm", "fsl,ecm";
- reg = <0x1000 0x1000>;
- interrupts = <17 2>;
- interrupt-parent = <&mpic>;
- };
-
- memory-controller@2000 {
- compatible = "fsl,mpc8544-memory-controller";
- reg = <0x2000 0x1000>;
- interrupt-parent = <&mpic>;
- interrupts = <18 2>;
- };
-
- L2: l2-cache-controller@20000 {
- compatible = "fsl,mpc8544-l2-cache-controller";
- reg = <0x20000 0x1000>;
- cache-line-size = <32>; // 32 bytes
- cache-size = <0x40000>; // L2, 256K
- interrupt-parent = <&mpic>;
- interrupts = <16 2>;
- };
-
- i2c@3000 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <0>;
- compatible = "fsl-i2c";
- reg = <0x3000 0x100>;
- interrupts = <43 2>;
- interrupt-parent = <&mpic>;
- dfsrr;
- };
-
- i2c@3100 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <1>;
- compatible = "fsl-i2c";
- reg = <0x3100 0x100>;
- interrupts = <43 2>;
- interrupt-parent = <&mpic>;
- dfsrr;
- };
-
- dma@21300 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,mpc8544-dma", "fsl,eloplus-dma";
- reg = <0x21300 0x4>;
- ranges = <0x0 0x21100 0x200>;
- cell-index = <0>;
- dma-channel@0 {
- compatible = "fsl,mpc8544-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x0 0x80>;
- cell-index = <0>;
- interrupt-parent = <&mpic>;
- interrupts = <20 2>;
- };
- dma-channel@80 {
- compatible = "fsl,mpc8544-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x80 0x80>;
- cell-index = <1>;
- interrupt-parent = <&mpic>;
- interrupts = <21 2>;
- };
- dma-channel@100 {
- compatible = "fsl,mpc8544-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x100 0x80>;
- cell-index = <2>;
- interrupt-parent = <&mpic>;
- interrupts = <22 2>;
- };
- dma-channel@180 {
- compatible = "fsl,mpc8544-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x180 0x80>;
- cell-index = <3>;
- interrupt-parent = <&mpic>;
- interrupts = <23 2>;
- };
- };
-
- enet0: ethernet@24000 {
- #address-cells = <1>;
- #size-cells = <1>;
- cell-index = <0>;
- device_type = "network";
- model = "TSEC";
- compatible = "gianfar";
- reg = <0x24000 0x1000>;
- ranges = <0x0 0x24000 0x1000>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <29 2 30 2 34 2>;
- interrupt-parent = <&mpic>;
- phy-handle = <&phy0>;
- tbi-handle = <&tbi0>;
- phy-connection-type = "rgmii-id";
-
- mdio@520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-mdio";
- reg = <0x520 0x20>;
-
- phy0: ethernet-phy@0 {
- interrupt-parent = <&mpic>;
- interrupts = <10 1>;
- reg = <0x0>;
- device_type = "ethernet-phy";
- };
- phy1: ethernet-phy@1 {
- interrupt-parent = <&mpic>;
- interrupts = <10 1>;
- reg = <0x1>;
- device_type = "ethernet-phy";
- };
-
- tbi0: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
- };
-
- enet1: ethernet@26000 {
- #address-cells = <1>;
- #size-cells = <1>;
- cell-index = <1>;
- device_type = "network";
- model = "TSEC";
- compatible = "gianfar";
- reg = <0x26000 0x1000>;
- ranges = <0x0 0x26000 0x1000>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <31 2 32 2 33 2>;
- interrupt-parent = <&mpic>;
- phy-handle = <&phy1>;
- tbi-handle = <&tbi1>;
- phy-connection-type = "rgmii-id";
-
- mdio@520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-tbi";
- reg = <0x520 0x20>;
-
- tbi1: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
- };
-
- serial0: serial@4500 {
- cell-index = <0>;
- device_type = "serial";
- compatible = "ns16550";
- reg = <0x4500 0x100>;
- clock-frequency = <0>;
- interrupts = <42 2>;
- interrupt-parent = <&mpic>;
- };
-
- serial1: serial@4600 {
- cell-index = <1>;
- device_type = "serial";
- compatible = "ns16550";
- reg = <0x4600 0x100>;
- clock-frequency = <0>;
- interrupts = <42 2>;
- interrupt-parent = <&mpic>;
- };
-
- global-utilities@e0000 { //global utilities block
- compatible = "fsl,mpc8548-guts";
- reg = <0xe0000 0x1000>;
- fsl,has-rstcr;
- };
-
- crypto@30000 {
- compatible = "fsl,sec2.1", "fsl,sec2.0";
- reg = <0x30000 0x10000>;
- interrupts = <45 2>;
- interrupt-parent = <&mpic>;
- fsl,num-channels = <4>;
- fsl,channel-fifo-len = <24>;
- fsl,exec-units-mask = <0xfe>;
- fsl,descriptor-types-mask = <0x12b0ebf>;
- };
-
- mpic: pic@40000 {
- interrupt-controller;
- #address-cells = <0>;
- #interrupt-cells = <2>;
- reg = <0x40000 0x40000>;
- compatible = "chrp,open-pic";
- device_type = "open-pic";
- };
+ lbc: localbus@e0005000 {
+ reg = <0 0xe0005000 0 0x1000>;
+ };
- msi@41600 {
- compatible = "fsl,mpc8544-msi", "fsl,mpic-msi";
- reg = <0x41600 0x80>;
- msi-available-ranges = <0 0x100>;
- interrupts = <
- 0xe0 0
- 0xe1 0
- 0xe2 0
- 0xe3 0
- 0xe4 0
- 0xe5 0
- 0xe6 0
- 0xe7 0>;
- interrupt-parent = <&mpic>;
- };
+ board_soc: soc: soc8544@e0000000 {
+ ranges = <0x0 0x0 0xe0000000 0x100000>;
};
pci0: pci@e0008000 {
- compatible = "fsl,mpc8540-pci";
- device_type = "pci";
+ reg = <0 0xe0008000 0 0x1000>;
+ ranges = <0x2000000 0x0 0xc0000000 0 0xc0000000 0x0 0x20000000
+ 0x1000000 0x0 0x00000000 0 0xe1000000 0x0 0x10000>;
+ clock-frequency = <66666666>;
interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
interrupt-map = <
/* IDSEL 0x11 J17 Slot 1 */
- 0x8800 0x0 0x0 0x1 &mpic 0x2 0x1
- 0x8800 0x0 0x0 0x2 &mpic 0x3 0x1
- 0x8800 0x0 0x0 0x3 &mpic 0x4 0x1
- 0x8800 0x0 0x0 0x4 &mpic 0x1 0x1
+ 0x8800 0x0 0x0 0x1 &mpic 0x2 0x1 0 0
+ 0x8800 0x0 0x0 0x2 &mpic 0x3 0x1 0 0
+ 0x8800 0x0 0x0 0x3 &mpic 0x4 0x1 0 0
+ 0x8800 0x0 0x0 0x4 &mpic 0x1 0x1 0 0
/* IDSEL 0x12 J16 Slot 2 */
- 0x9000 0x0 0x0 0x1 &mpic 0x3 0x1
- 0x9000 0x0 0x0 0x2 &mpic 0x4 0x1
- 0x9000 0x0 0x0 0x3 &mpic 0x2 0x1
- 0x9000 0x0 0x0 0x4 &mpic 0x1 0x1>;
-
- interrupt-parent = <&mpic>;
- interrupts = <24 2>;
- bus-range = <0 255>;
- ranges = <0x2000000 0x0 0xc0000000 0xc0000000 0x0 0x20000000
- 0x1000000 0x0 0x0 0xe1000000 0x0 0x10000>;
- clock-frequency = <66666666>;
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- reg = <0xe0008000 0x1000>;
+ 0x9000 0x0 0x0 0x1 &mpic 0x3 0x1 0 0
+ 0x9000 0x0 0x0 0x2 &mpic 0x4 0x1 0 0
+ 0x9000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0
+ 0x9000 0x0 0x0 0x4 &mpic 0x1 0x1 0 0>;
};
pci1: pcie@e0009000 {
- compatible = "fsl,mpc8548-pcie";
- device_type = "pci";
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- reg = <0xe0009000 0x1000>;
- bus-range = <0 255>;
- ranges = <0x2000000 0x0 0x80000000 0x80000000 0x0 0x20000000
- 0x1000000 0x0 0x0 0xe1010000 0x0 0x10000>;
- clock-frequency = <33333333>;
- interrupt-parent = <&mpic>;
- interrupts = <25 2>;
- interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
- interrupt-map = <
- /* IDSEL 0x0 */
- 0000 0x0 0x0 0x1 &mpic 0x4 0x1
- 0000 0x0 0x0 0x2 &mpic 0x5 0x1
- 0000 0x0 0x0 0x3 &mpic 0x6 0x1
- 0000 0x0 0x0 0x4 &mpic 0x7 0x1
- >;
+ reg = <0x0 0xe0009000 0x0 0x1000>;
+ ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000
+ 0x1000000 0x0 0x00000000 0 0xe1010000 0x0 0x10000>;
pcie@0 {
- reg = <0x0 0x0 0x0 0x0 0x0>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
ranges = <0x2000000 0x0 0x80000000
0x2000000 0x0 0x80000000
0x0 0x20000000
@@ -353,31 +66,10 @@
};
pci2: pcie@e000a000 {
- compatible = "fsl,mpc8548-pcie";
- device_type = "pci";
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- reg = <0xe000a000 0x1000>;
- bus-range = <0 255>;
- ranges = <0x2000000 0x0 0xa0000000 0xa0000000 0x0 0x10000000
- 0x1000000 0x0 0x0 0xe1020000 0x0 0x10000>;
- clock-frequency = <33333333>;
- interrupt-parent = <&mpic>;
- interrupts = <26 2>;
- interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
- interrupt-map = <
- /* IDSEL 0x0 */
- 0000 0x0 0x0 0x1 &mpic 0x0 0x1
- 0000 0x0 0x0 0x2 &mpic 0x1 0x1
- 0000 0x0 0x0 0x3 &mpic 0x2 0x1
- 0000 0x0 0x0 0x4 &mpic 0x3 0x1
- >;
+ reg = <0x0 0xe000a000 0x0 0x1000>;
+ ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x10000000
+ 0x1000000 0x0 0x00000000 0 0xe1020000 0x0 0x10000>;
pcie@0 {
- reg = <0x0 0x0 0x0 0x0 0x0>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
ranges = <0x2000000 0x0 0xa0000000
0x2000000 0x0 0xa0000000
0x0 0x10000000
@@ -388,44 +80,11 @@
};
};
- pci3: pcie@e000b000 {
- compatible = "fsl,mpc8548-pcie";
- device_type = "pci";
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- reg = <0xe000b000 0x1000>;
- bus-range = <0 255>;
- ranges = <0x2000000 0x0 0xb0000000 0xb0000000 0x0 0x100000
- 0x1000000 0x0 0x0 0xb0100000 0x0 0x100000>;
- clock-frequency = <33333333>;
- interrupt-parent = <&mpic>;
- interrupts = <27 2>;
- interrupt-map-mask = <0xff00 0x0 0x0 0x1>;
- interrupt-map = <
- // IDSEL 0x1c USB
- 0xe000 0x0 0x0 0x1 &i8259 0xc 0x2
- 0xe100 0x0 0x0 0x2 &i8259 0x9 0x2
- 0xe200 0x0 0x0 0x3 &i8259 0xa 0x2
- 0xe300 0x0 0x0 0x4 &i8259 0xb 0x2
-
- // IDSEL 0x1d Audio
- 0xe800 0x0 0x0 0x1 &i8259 0x6 0x2
-
- // IDSEL 0x1e Legacy
- 0xf000 0x0 0x0 0x1 &i8259 0x7 0x2
- 0xf100 0x0 0x0 0x1 &i8259 0x7 0x2
-
- // IDSEL 0x1f IDE/SATA
- 0xf800 0x0 0x0 0x1 &i8259 0xe 0x2
- 0xf900 0x0 0x0 0x1 &i8259 0x5 0x2
- >;
-
+ board_pci3: pci3: pcie@e000b000 {
+ reg = <0x0 0xe000b000 0x0 0x1000>;
+ ranges = <0x2000000 0x0 0xb0000000 0 0xb0000000 0x0 0x100000
+ 0x1000000 0x0 0x00000000 0 0xb0100000 0x0 0x100000>;
pcie@0 {
- reg = <0x0 0x0 0x0 0x0 0x0>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
ranges = <0x2000000 0x0 0xb0000000
0x2000000 0x0 0xb0000000
0x0 0x100000
@@ -433,70 +92,14 @@
0x1000000 0x0 0x0
0x1000000 0x0 0x0
0x0 0x100000>;
-
- uli1575@0 {
- reg = <0x0 0x0 0x0 0x0 0x0>;
- #size-cells = <2>;
- #address-cells = <3>;
- ranges = <0x2000000 0x0 0xb0000000
- 0x2000000 0x0 0xb0000000
- 0x0 0x100000
-
- 0x1000000 0x0 0x0
- 0x1000000 0x0 0x0
- 0x0 0x100000>;
- isa@1e {
- device_type = "isa";
- #interrupt-cells = <2>;
- #size-cells = <1>;
- #address-cells = <2>;
- reg = <0xf000 0x0 0x0 0x0 0x0>;
- ranges = <0x1 0x0
- 0x1000000 0x0 0x0
- 0x1000>;
- interrupt-parent = <&i8259>;
-
- i8259: interrupt-controller@20 {
- reg = <0x1 0x20 0x2
- 0x1 0xa0 0x2
- 0x1 0x4d0 0x2>;
- interrupt-controller;
- device_type = "interrupt-controller";
- #address-cells = <0>;
- #interrupt-cells = <2>;
- compatible = "chrp,iic";
- interrupts = <9 2>;
- interrupt-parent = <&mpic>;
- };
-
- i8042@60 {
- #size-cells = <0>;
- #address-cells = <1>;
- reg = <0x1 0x60 0x1 0x1 0x64 0x1>;
- interrupts = <1 3 12 3>;
- interrupt-parent = <&i8259>;
-
- keyboard@0 {
- reg = <0x0>;
- compatible = "pnpPNP,303";
- };
-
- mouse@1 {
- reg = <0x1>;
- compatible = "pnpPNP,f03";
- };
- };
-
- rtc@70 {
- compatible = "pnpPNP,b00";
- reg = <0x1 0x70 0x2>;
- };
-
- gpio@400 {
- reg = <0x1 0x400 0x80>;
- };
- };
- };
};
};
};
+
+/*
+ * mpc8544ds.dtsi must be last to ensure board_pci3 overrides pci3 settings
+ * for interrupt-map & interrupt-map-mask
+ */
+
+/include/ "fsl/mpc8544si-post.dtsi"
+/include/ "mpc8544ds.dtsi"
new file mode 100644
@@ -0,0 +1,161 @@
+/*
+ * MPC8544DS Device Tree Source stub (no addresses or top-level ranges)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&board_soc {
+ enet0: ethernet@24000 {
+ phy-handle = <&phy0>;
+ tbi-handle = <&tbi0>;
+ phy-connection-type = "rgmii-id";
+ };
+
+ mdio@24520 {
+ phy0: ethernet-phy@0 {
+ interrupts = <10 1 0 0>;
+ reg = <0x0>;
+ device_type = "ethernet-phy";
+ };
+ phy1: ethernet-phy@1 {
+ interrupts = <10 1 0 0>;
+ reg = <0x1>;
+ device_type = "ethernet-phy";
+ };
+
+ tbi0: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
+
+ enet2: ethernet@26000 {
+ phy-handle = <&phy1>;
+ tbi-handle = <&tbi1>;
+ phy-connection-type = "rgmii-id";
+ };
+
+ mdio@26520 {
+ tbi1: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
+};
+
+&board_pci3 {
+ pcie@0 {
+ interrupt-map-mask = <0xff00 0x0 0x0 0x7>;
+ interrupt-map = <
+ // IDSEL 0x1c USB
+ 0xe000 0x0 0x0 0x1 &i8259 0xc 0x2
+ 0xe100 0x0 0x0 0x2 &i8259 0x9 0x2
+ 0xe200 0x0 0x0 0x3 &i8259 0xa 0x2
+ 0xe300 0x0 0x0 0x4 &i8259 0xb 0x2
+
+ // IDSEL 0x1d Audio
+ 0xe800 0x0 0x0 0x1 &i8259 0x6 0x2
+
+ // IDSEL 0x1e Legacy
+ 0xf000 0x0 0x0 0x1 &i8259 0x7 0x2
+ 0xf100 0x0 0x0 0x1 &i8259 0x7 0x2
+
+ // IDSEL 0x1f IDE/SATA
+ 0xf800 0x0 0x0 0x1 &i8259 0xe 0x2
+ 0xf900 0x0 0x0 0x1 &i8259 0x5 0x2
+ >;
+
+
+ uli1575@0 {
+ reg = <0x0 0x0 0x0 0x0 0x0>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ ranges = <0x2000000 0x0 0xb0000000
+ 0x2000000 0x0 0xb0000000
+ 0x0 0x100000
+
+ 0x1000000 0x0 0x0
+ 0x1000000 0x0 0x0
+ 0x0 0x100000>;
+ isa@1e {
+ device_type = "isa";
+ #interrupt-cells = <2>;
+ #size-cells = <1>;
+ #address-cells = <2>;
+ reg = <0xf000 0x0 0x0 0x0 0x0>;
+ ranges = <0x1 0x0 0x1000000 0x0 0x0
+ 0x1000>;
+ interrupt-parent = <&i8259>;
+
+ i8259: interrupt-controller@20 {
+ reg = <0x1 0x20 0x2
+ 0x1 0xa0 0x2
+ 0x1 0x4d0 0x2>;
+ interrupt-controller;
+ device_type = "interrupt-controller";
+ #address-cells = <0>;
+ #interrupt-cells = <2>;
+ compatible = "chrp,iic";
+ interrupts = <9 2 0 0>;
+ interrupt-parent = <&mpic>;
+ };
+
+ i8042@60 {
+ #size-cells = <0>;
+ #address-cells = <1>;
+ reg = <0x1 0x60 0x1 0x1 0x64 0x1>;
+ interrupts = <1 3 12 3>;
+ interrupt-parent =
+ <&i8259>;
+
+ keyboard@0 {
+ reg = <0x0>;
+ compatible = "pnpPNP,303";
+ };
+
+ mouse@1 {
+ reg = <0x1>;
+ compatible = "pnpPNP,f03";
+ };
+ };
+
+ rtc@70 {
+ compatible = "pnpPNP,b00";
+ reg = <0x1 0x70 0x2>;
+ };
+
+ gpio@400 {
+ reg = <0x1 0x400 0x80>;
+ };
+ };
+ };
+ };
+};
Signed-off-by: Kumar Gala <galak@kernel.crashing.org> --- arch/powerpc/boot/dts/fsl/mpc8544si-post.dtsi | 191 ++++++++++ arch/powerpc/boot/dts/fsl/mpc8544si-pre.dtsi | 63 ++++ arch/powerpc/boot/dts/mpc8544ds.dts | 473 ++----------------------- arch/powerpc/boot/dts/mpc8544ds.dtsi | 161 +++++++++ 4 files changed, 453 insertions(+), 435 deletions(-) create mode 100644 arch/powerpc/boot/dts/fsl/mpc8544si-post.dtsi create mode 100644 arch/powerpc/boot/dts/fsl/mpc8544si-pre.dtsi create mode 100644 arch/powerpc/boot/dts/mpc8544ds.dtsi