[23/23] mtd: spi-nor: Trim what is exposed in spi-nor.h
diff mbox series

Message ID 20200302180730.1886678-24-tudor.ambarus@microchip.com
State New
Headers show
Series
  • mtd: spi-nor: Move manufacturer/SFDP code out of the core
Related show

Commit Message

Ambarus Tudor March 2, 2020, 6:07 p.m. UTC
From: Tudor Ambarus <tudor.ambarus@microchip.com>

The SPI NOR controllers drivers must not be able to use structures that
are meant just for the SPI NOR core.

struct spi_nor_flash_parameter is filled at run-time with info gathered
from flash_info, manufacturer and sfdp data. struct spi_nor_flash_parameter
should be opaque to the SPI NOR controller drivers, make sure it is.

spi_nor_option_flags, spi_nor_read_command, spi_nor_pp_command,
spi_nor_read_command_index and spi_nor_pp_command_index are defined for the
core use, make sure they are opaque to the SPI NOR controller drivers.

Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
---
 drivers/mtd/spi-nor/core.c       |  86 ++++++----
 drivers/mtd/spi-nor/core.h       | 214 +++++++++++++++++++++++++
 drivers/mtd/spi-nor/gigadevice.c |   2 +-
 drivers/mtd/spi-nor/issi.c       |   2 +-
 drivers/mtd/spi-nor/macronix.c   |   4 +-
 drivers/mtd/spi-nor/micron-st.c  |   4 +-
 drivers/mtd/spi-nor/sfdp.c       |  10 ++
 drivers/mtd/spi-nor/spansion.c   |   2 +-
 drivers/mtd/spi-nor/winbond.c    |   2 +-
 drivers/mtd/spi-nor/xilinx.c     |   4 +-
 include/linux/mtd/spi-nor.h      | 259 +------------------------------
 11 files changed, 294 insertions(+), 295 deletions(-)

Patch
diff mbox series

diff --git a/drivers/mtd/spi-nor/core.c b/drivers/mtd/spi-nor/core.c
index a2e1917b608d..860dac1dff90 100644
--- a/drivers/mtd/spi-nor/core.c
+++ b/drivers/mtd/spi-nor/core.c
@@ -802,7 +802,7 @@  static int spi_nor_write_16bit_sr_and_check(struct spi_nor *nor, u8 sr1)
 		ret = spi_nor_read_cr(nor, &sr_cr[1]);
 		if (ret)
 			return ret;
-	} else if (nor->params.quad_enable) {
+	} else if (nor->params->quad_enable) {
 		/*
 		 * If the Status Register 2 Read command (35h) is not
 		 * supported, we should at least be sure we don't
@@ -810,7 +810,7 @@  static int spi_nor_write_16bit_sr_and_check(struct spi_nor *nor, u8 sr1)
 		 *
 		 * We can safely assume that when the Quad Enable method is
 		 * set, the value of the QE bit is one, as a consequence of the
-		 * nor->params.quad_enable() call.
+		 * nor->params->quad_enable() call.
 		 *
 		 * We can safely assume that the Quad Enable bit is present in
 		 * the Status Register 2 at BIT(1). According to the JESD216
@@ -1075,6 +1075,11 @@  static u8 spi_nor_convert_3to4_erase(u8 opcode)
 				      ARRAY_SIZE(spi_nor_3to4_erase));
 }
 
+static bool spi_nor_has_uniform_erase(const struct spi_nor *nor)
+{
+	return !!nor->params->erase_map.uniform_erase_type;
+}
+
 static void spi_nor_set_4byte_opcodes(struct spi_nor *nor)
 {
 	nor->read_opcode = spi_nor_convert_3to4_read(nor->read_opcode);
@@ -1082,7 +1087,7 @@  static void spi_nor_set_4byte_opcodes(struct spi_nor *nor)
 	nor->erase_opcode = spi_nor_convert_3to4_erase(nor->erase_opcode);
 
 	if (!spi_nor_has_uniform_erase(nor)) {
-		struct spi_nor_erase_map *map = &nor->params.erase_map;
+		struct spi_nor_erase_map *map = &nor->params->erase_map;
 		struct spi_nor_erase_type *erase;
 		int i;
 
@@ -1119,10 +1124,10 @@  void spi_nor_unlock_and_unprep(struct spi_nor *nor)
 
 static u32 spi_nor_convert_addr(struct spi_nor *nor, loff_t addr)
 {
-	if (!nor->params.convert_addr)
+	if (!nor->params->convert_addr)
 		return addr;
 
-	return nor->params.convert_addr(nor, addr);
+	return nor->params->convert_addr(nor, addr);
 }
 
 /*
@@ -1227,6 +1232,16 @@  spi_nor_find_best_erase_type(const struct spi_nor_erase_map *map,
 	return NULL;
 }
 
+static u64 spi_nor_region_is_last(const struct spi_nor_erase_region *region)
+{
+	return region->offset & SNOR_LAST_REGION;
+}
+
+static u64 spi_nor_region_end(const struct spi_nor_erase_region *region)
+{
+	return (region->offset & ~SNOR_ERASE_FLAGS_MASK) + region->size;
+}
+
 /**
  * spi_nor_region_next() - get the next spi nor region
  * @region:	pointer to a structure that describes a SPI NOR erase region
@@ -1331,7 +1346,7 @@  static int spi_nor_init_erase_cmd_list(struct spi_nor *nor,
 				       struct list_head *erase_list,
 				       u64 addr, u32 len)
 {
-	const struct spi_nor_erase_map *map = &nor->params.erase_map;
+	const struct spi_nor_erase_map *map = &nor->params->erase_map;
 	const struct spi_nor_erase_type *erase, *prev_erase = NULL;
 	struct spi_nor_erase_region *region;
 	struct spi_nor_erase_command *cmd = NULL;
@@ -1817,7 +1832,7 @@  static int spi_nor_lock(struct mtd_info *mtd, loff_t ofs, uint64_t len)
 	if (ret)
 		return ret;
 
-	ret = nor->params.locking_ops->lock(nor, ofs, len);
+	ret = nor->params->locking_ops->lock(nor, ofs, len);
 
 	spi_nor_unlock_and_unprep(nor);
 	return ret;
@@ -1832,7 +1847,7 @@  static int spi_nor_unlock(struct mtd_info *mtd, loff_t ofs, uint64_t len)
 	if (ret)
 		return ret;
 
-	ret = nor->params.locking_ops->unlock(nor, ofs, len);
+	ret = nor->params->locking_ops->unlock(nor, ofs, len);
 
 	spi_nor_unlock_and_unprep(nor);
 	return ret;
@@ -1847,7 +1862,7 @@  static int spi_nor_is_locked(struct mtd_info *mtd, loff_t ofs, uint64_t len)
 	if (ret)
 		return ret;
 
-	ret = nor->params.locking_ops->is_locked(nor, ofs, len);
+	ret = nor->params->locking_ops->is_locked(nor, ofs, len);
 
 	spi_nor_unlock_and_unprep(nor);
 	return ret;
@@ -2312,7 +2327,7 @@  static int spi_nor_spimem_check_pp(struct spi_nor *nor,
 static void
 spi_nor_spimem_adjust_hwcaps(struct spi_nor *nor, u32 *hwcaps)
 {
-	struct spi_nor_flash_parameter *params =  &nor->params;
+	struct spi_nor_flash_parameter *params = nor->params;
 	unsigned int cap;
 
 	/* DTR modes are not supported yet, mask them all. */
@@ -2411,7 +2426,7 @@  static int spi_nor_select_read(struct spi_nor *nor,
 	if (cmd < 0)
 		return -EINVAL;
 
-	read = &nor->params.reads[cmd];
+	read = &nor->params->reads[cmd];
 	nor->read_opcode = read->opcode;
 	nor->read_proto = read->proto;
 
@@ -2442,7 +2457,7 @@  static int spi_nor_select_pp(struct spi_nor *nor,
 	if (cmd < 0)
 		return -EINVAL;
 
-	pp = &nor->params.page_programs[cmd];
+	pp = &nor->params->page_programs[cmd];
 	nor->program_opcode = pp->opcode;
 	nor->write_proto = pp->proto;
 	return 0;
@@ -2503,7 +2518,7 @@  spi_nor_select_uniform_erase(struct spi_nor_erase_map *map,
 
 static int spi_nor_select_erase(struct spi_nor *nor)
 {
-	struct spi_nor_erase_map *map = &nor->params.erase_map;
+	struct spi_nor_erase_map *map = &nor->params->erase_map;
 	const struct spi_nor_erase_type *erase = NULL;
 	struct mtd_info *mtd = &nor->mtd;
 	u32 wanted_size = nor->info->sector_size;
@@ -2552,7 +2567,7 @@  static int spi_nor_select_erase(struct spi_nor *nor)
 static int spi_nor_default_setup(struct spi_nor *nor,
 				 const struct spi_nor_hwcaps *hwcaps)
 {
-	struct spi_nor_flash_parameter *params = &nor->params;
+	struct spi_nor_flash_parameter *params = nor->params;
 	u32 ignored_mask, shared_mask;
 	int err;
 
@@ -2613,10 +2628,10 @@  static int spi_nor_default_setup(struct spi_nor *nor,
 static int spi_nor_setup(struct spi_nor *nor,
 			 const struct spi_nor_hwcaps *hwcaps)
 {
-	if (!nor->params.setup)
+	if (!nor->params->setup)
 		return 0;
 
-	return nor->params.setup(nor, hwcaps);
+	return nor->params->setup(nor, hwcaps);
 }
 
 /**
@@ -2646,13 +2661,13 @@  static void spi_nor_sfdp_init_params(struct spi_nor *nor)
 {
 	struct spi_nor_flash_parameter sfdp_params;
 
-	memcpy(&sfdp_params, &nor->params, sizeof(sfdp_params));
+	memcpy(&sfdp_params, nor->params, sizeof(sfdp_params));
 
 	if (spi_nor_parse_sfdp(nor, &sfdp_params)) {
 		nor->addr_width = 0;
 		nor->flags &= ~SNOR_F_4B_OPCODES;
 	} else {
-		memcpy(&nor->params, &sfdp_params, sizeof(nor->params));
+		memcpy(nor->params, &sfdp_params, sizeof(*nor->params));
 	}
 }
 
@@ -2663,7 +2678,7 @@  static void spi_nor_sfdp_init_params(struct spi_nor *nor)
  */
 static void spi_nor_info_init_params(struct spi_nor *nor)
 {
-	struct spi_nor_flash_parameter *params = &nor->params;
+	struct spi_nor_flash_parameter *params = nor->params;
 	struct spi_nor_erase_map *map = &params->erase_map;
 	const struct flash_info *info = nor->info;
 	struct device_node *np = spi_nor_get_flash_node(nor);
@@ -2782,8 +2797,8 @@  static void spi_nor_late_init_params(struct spi_nor *nor)
 	 * NOR protection support. When locking_ops are not provided, we pick
 	 * the default ones.
 	 */
-	if (nor->flags & SNOR_F_HAS_LOCK && !nor->params.locking_ops)
-		nor->params.locking_ops = &spi_nor_sr_locking_ops;
+	if (nor->flags & SNOR_F_HAS_LOCK && !nor->params->locking_ops)
+		nor->params->locking_ops = &spi_nor_sr_locking_ops;
 }
 
 /**
@@ -2823,8 +2838,12 @@  static void spi_nor_late_init_params(struct spi_nor *nor)
  * ->default_init() hook or the SFDP parser do not set specific params.
  *		spi_nor_late_init_params()
  */
-static void spi_nor_init_params(struct spi_nor *nor)
+static int spi_nor_init_params(struct spi_nor *nor)
 {
+	nor->params = devm_kzalloc(nor->dev, sizeof(*nor->params), GFP_KERNEL);
+	if (!nor->params)
+		return -ENOMEM;
+
 	spi_nor_info_init_params(nor);
 
 	spi_nor_manufacturer_init_params(nor);
@@ -2836,6 +2855,8 @@  static void spi_nor_init_params(struct spi_nor *nor)
 	spi_nor_post_sfdp_fixups(nor);
 
 	spi_nor_late_init_params(nor);
+
+	return 0;
 }
 
 /**
@@ -2846,14 +2867,14 @@  static void spi_nor_init_params(struct spi_nor *nor)
  */
 static int spi_nor_quad_enable(struct spi_nor *nor)
 {
-	if (!nor->params.quad_enable)
+	if (!nor->params->quad_enable)
 		return 0;
 
 	if (!(spi_nor_get_protocol_width(nor->read_proto) == 4 ||
 	      spi_nor_get_protocol_width(nor->write_proto) == 4))
 		return 0;
 
-	return nor->params.quad_enable(nor);
+	return nor->params->quad_enable(nor);
 }
 
 /**
@@ -2868,7 +2889,7 @@  static int spi_nor_quad_enable(struct spi_nor *nor)
 static int spi_nor_unlock_all(struct spi_nor *nor)
 {
 	if (nor->flags & SNOR_F_HAS_LOCK)
-		return spi_nor_unlock(&nor->mtd, 0, nor->params.size);
+		return spi_nor_unlock(&nor->mtd, 0, nor->params->size);
 
 	return 0;
 }
@@ -2899,7 +2920,7 @@  static int spi_nor_init(struct spi_nor *nor)
 		 */
 		WARN_ONCE(nor->flags & SNOR_F_BROKEN_RESET,
 			  "enabling reset hack; may not recover from unexpected reboots\n");
-		nor->params.set_4byte(nor, true);
+		nor->params->set_4byte(nor, true);
 	}
 
 	return 0;
@@ -2923,7 +2944,7 @@  void spi_nor_restore(struct spi_nor *nor)
 	/* restore the addressing mode */
 	if (nor->addr_width == 4 && !(nor->flags & SNOR_F_4B_OPCODES) &&
 	    nor->flags & SNOR_F_BROKEN_RESET)
-		nor->params.set_4byte(nor, false);
+		nor->params->set_4byte(nor, false);
 }
 EXPORT_SYMBOL_GPL(spi_nor_restore);
 
@@ -3028,7 +3049,6 @@  int spi_nor_scan(struct spi_nor *nor, const char *name,
 	struct device *dev = nor->dev;
 	struct mtd_info *mtd = &nor->mtd;
 	struct device_node *np = spi_nor_get_flash_node(nor);
-	struct spi_nor_flash_parameter *params = &nor->params;
 	int ret;
 	int i;
 
@@ -3079,7 +3099,9 @@  int spi_nor_scan(struct spi_nor *nor, const char *name,
 	mtd->_write = spi_nor_write;
 
 	/* Init flash parameters based on flash_info struct and SFDP */
-	spi_nor_init_params(nor);
+	ret = spi_nor_init_params(nor);
+	if (ret)
+		return ret;
 
 	if (!mtd->name)
 		mtd->name = dev_name(dev);
@@ -3087,12 +3109,12 @@  int spi_nor_scan(struct spi_nor *nor, const char *name,
 	mtd->type = MTD_NORFLASH;
 	mtd->writesize = 1;
 	mtd->flags = MTD_CAP_NORFLASH;
-	mtd->size = params->size;
+	mtd->size = nor->params->size;
 	mtd->_erase = spi_nor_erase;
 	mtd->_read = spi_nor_read;
 	mtd->_resume = spi_nor_resume;
 
-	if (nor->params.locking_ops) {
+	if (nor->params->locking_ops) {
 		mtd->_lock = spi_nor_lock;
 		mtd->_unlock = spi_nor_unlock;
 		mtd->_is_locked = spi_nor_is_locked;
@@ -3115,7 +3137,7 @@  int spi_nor_scan(struct spi_nor *nor, const char *name,
 		mtd->flags |= MTD_NO_ERASE;
 
 	mtd->dev.parent = dev;
-	nor->page_size = params->page_size;
+	nor->page_size = nor->params->page_size;
 	mtd->writebufsize = nor->page_size;
 
 	if (of_property_read_bool(np, "broken-flash-reset"))
diff --git a/drivers/mtd/spi-nor/core.h b/drivers/mtd/spi-nor/core.h
index 3541a84c03d8..7654b6f3b966 100644
--- a/drivers/mtd/spi-nor/core.h
+++ b/drivers/mtd/spi-nor/core.h
@@ -11,6 +11,220 @@ 
 
 #define SPI_NOR_MAX_ID_LEN	6
 
+enum spi_nor_option_flags {
+	SNOR_F_USE_FSR		= BIT(0),
+	SNOR_F_HAS_SR_TB	= BIT(1),
+	SNOR_F_NO_OP_CHIP_ERASE	= BIT(2),
+	SNOR_F_READY_XSR_RDY	= BIT(3),
+	SNOR_F_USE_CLSR		= BIT(4),
+	SNOR_F_BROKEN_RESET	= BIT(5),
+	SNOR_F_4B_OPCODES	= BIT(6),
+	SNOR_F_HAS_4BAIT	= BIT(7),
+	SNOR_F_HAS_LOCK		= BIT(8),
+	SNOR_F_HAS_16BIT_SR	= BIT(9),
+	SNOR_F_NO_READ_CR	= BIT(10),
+	SNOR_F_HAS_SR_TB_BIT6	= BIT(11),
+};
+
+struct spi_nor_read_command {
+	u8			num_mode_clocks;
+	u8			num_wait_states;
+	u8			opcode;
+	enum spi_nor_protocol	proto;
+};
+
+struct spi_nor_pp_command {
+	u8			opcode;
+	enum spi_nor_protocol	proto;
+};
+
+enum spi_nor_read_command_index {
+	SNOR_CMD_READ,
+	SNOR_CMD_READ_FAST,
+	SNOR_CMD_READ_1_1_1_DTR,
+
+	/* Dual SPI */
+	SNOR_CMD_READ_1_1_2,
+	SNOR_CMD_READ_1_2_2,
+	SNOR_CMD_READ_2_2_2,
+	SNOR_CMD_READ_1_2_2_DTR,
+
+	/* Quad SPI */
+	SNOR_CMD_READ_1_1_4,
+	SNOR_CMD_READ_1_4_4,
+	SNOR_CMD_READ_4_4_4,
+	SNOR_CMD_READ_1_4_4_DTR,
+
+	/* Octal SPI */
+	SNOR_CMD_READ_1_1_8,
+	SNOR_CMD_READ_1_8_8,
+	SNOR_CMD_READ_8_8_8,
+	SNOR_CMD_READ_1_8_8_DTR,
+
+	SNOR_CMD_READ_MAX
+};
+
+enum spi_nor_pp_command_index {
+	SNOR_CMD_PP,
+
+	/* Quad SPI */
+	SNOR_CMD_PP_1_1_4,
+	SNOR_CMD_PP_1_4_4,
+	SNOR_CMD_PP_4_4_4,
+
+	/* Octal SPI */
+	SNOR_CMD_PP_1_1_8,
+	SNOR_CMD_PP_1_8_8,
+	SNOR_CMD_PP_8_8_8,
+
+	SNOR_CMD_PP_MAX
+};
+
+/**
+ * struct spi_nor_erase_type - Structure to describe a SPI NOR erase type
+ * @size:		the size of the sector/block erased by the erase type.
+ *			JEDEC JESD216B imposes erase sizes to be a power of 2.
+ * @size_shift:		@size is a power of 2, the shift is stored in
+ *			@size_shift.
+ * @size_mask:		the size mask based on @size_shift.
+ * @opcode:		the SPI command op code to erase the sector/block.
+ * @idx:		Erase Type index as sorted in the Basic Flash Parameter
+ *			Table. It will be used to synchronize the supported
+ *			Erase Types with the ones identified in the SFDP
+ *			optional tables.
+ */
+struct spi_nor_erase_type {
+	u32	size;
+	u32	size_shift;
+	u32	size_mask;
+	u8	opcode;
+	u8	idx;
+};
+
+/**
+ * struct spi_nor_erase_command - Used for non-uniform erases
+ * The structure is used to describe a list of erase commands to be executed
+ * once we validate that the erase can be performed. The elements in the list
+ * are run-length encoded.
+ * @list:		for inclusion into the list of erase commands.
+ * @count:		how many times the same erase command should be
+ *			consecutively used.
+ * @size:		the size of the sector/block erased by the command.
+ * @opcode:		the SPI command op code to erase the sector/block.
+ */
+struct spi_nor_erase_command {
+	struct list_head	list;
+	u32			count;
+	u32			size;
+	u8			opcode;
+};
+
+/**
+ * struct spi_nor_erase_region - Structure to describe a SPI NOR erase region
+ * @offset:		the offset in the data array of erase region start.
+ *			LSB bits are used as a bitmask encoding flags to
+ *			determine if this region is overlaid, if this region is
+ *			the last in the SPI NOR flash memory and to indicate
+ *			all the supported erase commands inside this region.
+ *			The erase types are sorted in ascending order with the
+ *			smallest Erase Type size being at BIT(0).
+ * @size:		the size of the region in bytes.
+ */
+struct spi_nor_erase_region {
+	u64		offset;
+	u64		size;
+};
+
+#define SNOR_ERASE_TYPE_MAX	4
+#define SNOR_ERASE_TYPE_MASK	GENMASK_ULL(SNOR_ERASE_TYPE_MAX - 1, 0)
+
+#define SNOR_LAST_REGION	BIT(4)
+#define SNOR_OVERLAID_REGION	BIT(5)
+
+#define SNOR_ERASE_FLAGS_MAX	6
+#define SNOR_ERASE_FLAGS_MASK	GENMASK_ULL(SNOR_ERASE_FLAGS_MAX - 1, 0)
+
+/**
+ * struct spi_nor_erase_map - Structure to describe the SPI NOR erase map
+ * @regions:		array of erase regions. The regions are consecutive in
+ *			address space. Walking through the regions is done
+ *			incrementally.
+ * @uniform_region:	a pre-allocated erase region for SPI NOR with a uniform
+ *			sector size (legacy implementation).
+ * @erase_type:		an array of erase types shared by all the regions.
+ *			The erase types are sorted in ascending order, with the
+ *			smallest Erase Type size being the first member in the
+ *			erase_type array.
+ * @uniform_erase_type:	bitmask encoding erase types that can erase the
+ *			entire memory. This member is completed at init by
+ *			uniform and non-uniform SPI NOR flash memories if they
+ *			support at least one erase type that can erase the
+ *			entire memory.
+ */
+struct spi_nor_erase_map {
+	struct spi_nor_erase_region	*regions;
+	struct spi_nor_erase_region	uniform_region;
+	struct spi_nor_erase_type	erase_type[SNOR_ERASE_TYPE_MAX];
+	u8				uniform_erase_type;
+};
+
+/**
+ * struct spi_nor_locking_ops - SPI NOR locking methods
+ * @lock:	lock a region of the SPI NOR.
+ * @unlock:	unlock a region of the SPI NOR.
+ * @is_locked:	check if a region of the SPI NOR is completely locked
+ */
+struct spi_nor_locking_ops {
+	int (*lock)(struct spi_nor *nor, loff_t ofs, uint64_t len);
+	int (*unlock)(struct spi_nor *nor, loff_t ofs, uint64_t len);
+	int (*is_locked)(struct spi_nor *nor, loff_t ofs, uint64_t len);
+};
+
+/**
+ * struct spi_nor_flash_parameter - SPI NOR flash parameters and settings.
+ * Includes legacy flash parameters and settings that can be overwritten
+ * by the spi_nor_fixups hooks, or dynamically when parsing the JESD216
+ * Serial Flash Discoverable Parameters (SFDP) tables.
+ *
+ * @size:		the flash memory density in bytes.
+ * @page_size:		the page size of the SPI NOR flash memory.
+ * @hwcaps:		describes the read and page program hardware
+ *			capabilities.
+ * @reads:		read capabilities ordered by priority: the higher index
+ *                      in the array, the higher priority.
+ * @page_programs:	page program capabilities ordered by priority: the
+ *                      higher index in the array, the higher priority.
+ * @erase_map:		the erase map parsed from the SFDP Sector Map Parameter
+ *                      Table.
+ * @quad_enable:	enables SPI NOR quad mode.
+ * @set_4byte:		puts the SPI NOR in 4 byte addressing mode.
+ * @convert_addr:	converts an absolute address into something the flash
+ *                      will understand. Particularly useful when pagesize is
+ *                      not a power-of-2.
+ * @setup:              configures the SPI NOR memory. Useful for SPI NOR
+ *                      flashes that have peculiarities to the SPI NOR standard
+ *                      e.g. different opcodes, specific address calculation,
+ *                      page size, etc.
+ * @locking_ops:	SPI NOR locking methods.
+ */
+struct spi_nor_flash_parameter {
+	u64				size;
+	u32				page_size;
+
+	struct spi_nor_hwcaps		hwcaps;
+	struct spi_nor_read_command	reads[SNOR_CMD_READ_MAX];
+	struct spi_nor_pp_command	page_programs[SNOR_CMD_PP_MAX];
+
+	struct spi_nor_erase_map        erase_map;
+
+	int (*quad_enable)(struct spi_nor *nor);
+	int (*set_4byte)(struct spi_nor *nor, bool enable);
+	u32 (*convert_addr)(struct spi_nor *nor, u32 addr);
+	int (*setup)(struct spi_nor *nor, const struct spi_nor_hwcaps *hwcaps);
+
+	const struct spi_nor_locking_ops *locking_ops;
+};
+
 /**
  * struct spi_nor_fixups - SPI NOR fixup hooks
  * @default_init: called after default flash parameters init. Used to tweak
diff --git a/drivers/mtd/spi-nor/gigadevice.c b/drivers/mtd/spi-nor/gigadevice.c
index 7930e4490dab..447d84bb2128 100644
--- a/drivers/mtd/spi-nor/gigadevice.c
+++ b/drivers/mtd/spi-nor/gigadevice.c
@@ -16,7 +16,7 @@  static void gd25q256_default_init(struct spi_nor *nor)
 	 * indicate the quad_enable method for this case, we need
 	 * to set it in the default_init fixup hook.
 	 */
-	nor->params.quad_enable = spi_nor_sr1_bit6_quad_enable;
+	nor->params->quad_enable = spi_nor_sr1_bit6_quad_enable;
 }
 
 static struct spi_nor_fixups gd25q256_fixups = {
diff --git a/drivers/mtd/spi-nor/issi.c b/drivers/mtd/spi-nor/issi.c
index 3a1c34c41388..ffcb60e54a80 100644
--- a/drivers/mtd/spi-nor/issi.c
+++ b/drivers/mtd/spi-nor/issi.c
@@ -68,7 +68,7 @@  static const struct flash_info issi_parts[] = {
 
 static void issi_default_init(struct spi_nor *nor)
 {
-	nor->params.quad_enable = spi_nor_sr1_bit6_quad_enable;
+	nor->params->quad_enable = spi_nor_sr1_bit6_quad_enable;
 }
 
 static const struct spi_nor_fixups issi_fixups = {
diff --git a/drivers/mtd/spi-nor/macronix.c b/drivers/mtd/spi-nor/macronix.c
index 1ae609c44676..d73bd0363144 100644
--- a/drivers/mtd/spi-nor/macronix.c
+++ b/drivers/mtd/spi-nor/macronix.c
@@ -82,8 +82,8 @@  static const struct flash_info macronix_parts[] = {
 
 static void macronix_default_init(struct spi_nor *nor)
 {
-	nor->params.quad_enable = spi_nor_sr1_bit6_quad_enable;
-	nor->params.set_4byte = spi_nor_en4_ex4_set_4byte;
+	nor->params->quad_enable = spi_nor_sr1_bit6_quad_enable;
+	nor->params->set_4byte = spi_nor_en4_ex4_set_4byte;
 }
 
 static const struct spi_nor_fixups macronix_fixups = {
diff --git a/drivers/mtd/spi-nor/micron-st.c b/drivers/mtd/spi-nor/micron-st.c
index 8017ca58b3a5..5be817d2f27c 100644
--- a/drivers/mtd/spi-nor/micron-st.c
+++ b/drivers/mtd/spi-nor/micron-st.c
@@ -106,8 +106,8 @@  static void micron_st_default_init(struct spi_nor *nor)
 {
 	nor->flags |= SNOR_F_HAS_LOCK;
 	nor->flags &= ~SNOR_F_HAS_16BIT_SR;
-	nor->params.quad_enable = NULL;
-	nor->params.set_4byte = spi_nor_en4_ex4_wen_set_4byte;
+	nor->params->quad_enable = NULL;
+	nor->params->set_4byte = spi_nor_en4_ex4_wen_set_4byte;
 }
 
 static const struct spi_nor_fixups micron_st_fixups = {
diff --git a/drivers/mtd/spi-nor/sfdp.c b/drivers/mtd/spi-nor/sfdp.c
index b790c3ec871f..6829dc7e4f74 100644
--- a/drivers/mtd/spi-nor/sfdp.c
+++ b/drivers/mtd/spi-nor/sfdp.c
@@ -734,6 +734,16 @@  static const u32 *spi_nor_get_map_in_use(struct spi_nor *nor, const u32 *smpt,
 	return ret;
 }
 
+static void spi_nor_region_mark_end(struct spi_nor_erase_region *region)
+{
+	region->offset |= SNOR_LAST_REGION;
+}
+
+static void spi_nor_region_mark_overlay(struct spi_nor_erase_region *region)
+{
+	region->offset |= SNOR_OVERLAID_REGION;
+}
+
 /**
  * spi_nor_region_check_overlay() - set overlay bit when the region is overlaid
  * @region:	pointer to a structure that describes a SPI NOR erase region
diff --git a/drivers/mtd/spi-nor/spansion.c b/drivers/mtd/spi-nor/spansion.c
index 16683983a20e..6756202ace4b 100644
--- a/drivers/mtd/spi-nor/spansion.c
+++ b/drivers/mtd/spi-nor/spansion.c
@@ -74,7 +74,7 @@  static const struct flash_info spansion_parts[] = {
 
 static void spansion_post_sfdp_fixups(struct spi_nor *nor)
 {
-	if (nor->params.size <= SZ_16M)
+	if (nor->params->size <= SZ_16M)
 		return;
 
 	nor->flags |= SNOR_F_4B_OPCODES;
diff --git a/drivers/mtd/spi-nor/winbond.c b/drivers/mtd/spi-nor/winbond.c
index 1e77dffbf729..f15be50024d1 100644
--- a/drivers/mtd/spi-nor/winbond.c
+++ b/drivers/mtd/spi-nor/winbond.c
@@ -97,7 +97,7 @@  static int winbond_set_4byte(struct spi_nor *nor, bool enable)
 
 static void winbond_default_init(struct spi_nor *nor)
 {
-	nor->params.set_4byte = winbond_set_4byte;
+	nor->params->set_4byte = winbond_set_4byte;
 }
 
 static const struct spi_nor_fixups winbond_fixups = {
diff --git a/drivers/mtd/spi-nor/xilinx.c b/drivers/mtd/spi-nor/xilinx.c
index fcf635d89f65..1138bdbf4199 100644
--- a/drivers/mtd/spi-nor/xilinx.c
+++ b/drivers/mtd/spi-nor/xilinx.c
@@ -70,7 +70,7 @@  static int xilinx_nor_setup(struct spi_nor *nor,
 		nor->mtd.erasesize = 8 * nor->page_size;
 	} else {
 		/* Flash in Default addressing mode */
-		nor->params.convert_addr = s3an_convert_addr;
+		nor->params->convert_addr = s3an_convert_addr;
 		nor->mtd.erasesize = nor->info->sector_size;
 	}
 
@@ -79,7 +79,7 @@  static int xilinx_nor_setup(struct spi_nor *nor,
 
 static void xilinx_post_sfdp_fixups(struct spi_nor *nor)
 {
-	nor->params.setup = xilinx_nor_setup;
+	nor->params->setup = xilinx_nor_setup;
 }
 
 static const struct spi_nor_fixups xilinx_fixups = {
diff --git a/include/linux/mtd/spi-nor.h b/include/linux/mtd/spi-nor.h
index dde2988a809e..d3d34c4eea48 100644
--- a/include/linux/mtd/spi-nor.h
+++ b/include/linux/mtd/spi-nor.h
@@ -227,110 +227,6 @@  static inline u8 spi_nor_get_protocol_width(enum spi_nor_protocol proto)
 	return spi_nor_get_protocol_data_nbits(proto);
 }
 
-enum spi_nor_option_flags {
-	SNOR_F_USE_FSR		= BIT(0),
-	SNOR_F_HAS_SR_TB	= BIT(1),
-	SNOR_F_NO_OP_CHIP_ERASE	= BIT(2),
-	SNOR_F_READY_XSR_RDY	= BIT(3),
-	SNOR_F_USE_CLSR		= BIT(4),
-	SNOR_F_BROKEN_RESET	= BIT(5),
-	SNOR_F_4B_OPCODES	= BIT(6),
-	SNOR_F_HAS_4BAIT	= BIT(7),
-	SNOR_F_HAS_LOCK		= BIT(8),
-	SNOR_F_HAS_16BIT_SR	= BIT(9),
-	SNOR_F_NO_READ_CR	= BIT(10),
-	SNOR_F_HAS_SR_TB_BIT6	= BIT(11),
-
-};
-
-/**
- * struct spi_nor_erase_type - Structure to describe a SPI NOR erase type
- * @size:		the size of the sector/block erased by the erase type.
- *			JEDEC JESD216B imposes erase sizes to be a power of 2.
- * @size_shift:		@size is a power of 2, the shift is stored in
- *			@size_shift.
- * @size_mask:		the size mask based on @size_shift.
- * @opcode:		the SPI command op code to erase the sector/block.
- * @idx:		Erase Type index as sorted in the Basic Flash Parameter
- *			Table. It will be used to synchronize the supported
- *			Erase Types with the ones identified in the SFDP
- *			optional tables.
- */
-struct spi_nor_erase_type {
-	u32	size;
-	u32	size_shift;
-	u32	size_mask;
-	u8	opcode;
-	u8	idx;
-};
-
-/**
- * struct spi_nor_erase_command - Used for non-uniform erases
- * The structure is used to describe a list of erase commands to be executed
- * once we validate that the erase can be performed. The elements in the list
- * are run-length encoded.
- * @list:		for inclusion into the list of erase commands.
- * @count:		how many times the same erase command should be
- *			consecutively used.
- * @size:		the size of the sector/block erased by the command.
- * @opcode:		the SPI command op code to erase the sector/block.
- */
-struct spi_nor_erase_command {
-	struct list_head	list;
-	u32			count;
-	u32			size;
-	u8			opcode;
-};
-
-/**
- * struct spi_nor_erase_region - Structure to describe a SPI NOR erase region
- * @offset:		the offset in the data array of erase region start.
- *			LSB bits are used as a bitmask encoding flags to
- *			determine if this region is overlaid, if this region is
- *			the last in the SPI NOR flash memory and to indicate
- *			all the supported erase commands inside this region.
- *			The erase types are sorted in ascending order with the
- *			smallest Erase Type size being at BIT(0).
- * @size:		the size of the region in bytes.
- */
-struct spi_nor_erase_region {
-	u64		offset;
-	u64		size;
-};
-
-#define SNOR_ERASE_TYPE_MAX	4
-#define SNOR_ERASE_TYPE_MASK	GENMASK_ULL(SNOR_ERASE_TYPE_MAX - 1, 0)
-
-#define SNOR_LAST_REGION	BIT(4)
-#define SNOR_OVERLAID_REGION	BIT(5)
-
-#define SNOR_ERASE_FLAGS_MAX	6
-#define SNOR_ERASE_FLAGS_MASK	GENMASK_ULL(SNOR_ERASE_FLAGS_MAX - 1, 0)
-
-/**
- * struct spi_nor_erase_map - Structure to describe the SPI NOR erase map
- * @regions:		array of erase regions. The regions are consecutive in
- *			address space. Walking through the regions is done
- *			incrementally.
- * @uniform_region:	a pre-allocated erase region for SPI NOR with a uniform
- *			sector size (legacy implementation).
- * @erase_type:		an array of erase types shared by all the regions.
- *			The erase types are sorted in ascending order, with the
- *			smallest Erase Type size being the first member in the
- *			erase_type array.
- * @uniform_erase_type:	bitmask encoding erase types that can erase the
- *			entire memory. This member is completed at init by
- *			uniform and non-uniform SPI NOR flash memories if they
- *			support at least one erase type that can erase the
- *			entire memory.
- */
-struct spi_nor_erase_map {
-	struct spi_nor_erase_region	*regions;
-	struct spi_nor_erase_region	uniform_region;
-	struct spi_nor_erase_type	erase_type[SNOR_ERASE_TYPE_MAX];
-	u8				uniform_erase_type;
-};
-
 /**
  * struct spi_nor_hwcaps - Structure for describing the hardware capabilies
  * supported by the SPI controller (bus master).
@@ -406,61 +302,7 @@  struct spi_nor_hwcaps {
 #define SNOR_HWCAPS_ALL		(SNOR_HWCAPS_READ_MASK |	\
 				 SNOR_HWCAPS_PP_MASK)
 
-struct spi_nor_read_command {
-	u8			num_mode_clocks;
-	u8			num_wait_states;
-	u8			opcode;
-	enum spi_nor_protocol	proto;
-};
-
-struct spi_nor_pp_command {
-	u8			opcode;
-	enum spi_nor_protocol	proto;
-};
-
-enum spi_nor_read_command_index {
-	SNOR_CMD_READ,
-	SNOR_CMD_READ_FAST,
-	SNOR_CMD_READ_1_1_1_DTR,
-
-	/* Dual SPI */
-	SNOR_CMD_READ_1_1_2,
-	SNOR_CMD_READ_1_2_2,
-	SNOR_CMD_READ_2_2_2,
-	SNOR_CMD_READ_1_2_2_DTR,
-
-	/* Quad SPI */
-	SNOR_CMD_READ_1_1_4,
-	SNOR_CMD_READ_1_4_4,
-	SNOR_CMD_READ_4_4_4,
-	SNOR_CMD_READ_1_4_4_DTR,
-
-	/* Octal SPI */
-	SNOR_CMD_READ_1_1_8,
-	SNOR_CMD_READ_1_8_8,
-	SNOR_CMD_READ_8_8_8,
-	SNOR_CMD_READ_1_8_8_DTR,
-
-	SNOR_CMD_READ_MAX
-};
-
-enum spi_nor_pp_command_index {
-	SNOR_CMD_PP,
-
-	/* Quad SPI */
-	SNOR_CMD_PP_1_1_4,
-	SNOR_CMD_PP_1_4_4,
-	SNOR_CMD_PP_4_4_4,
-
-	/* Octal SPI */
-	SNOR_CMD_PP_1_1_8,
-	SNOR_CMD_PP_1_8_8,
-	SNOR_CMD_PP_8_8_8,
-
-	SNOR_CMD_PP_MAX
-};
-
-/* Forward declaration that will be used in 'struct spi_nor_flash_parameter' */
+/* Forward declaration that is used in 'struct spi_nor_controller_ops' */
 struct spi_nor;
 
 /**
@@ -491,74 +333,14 @@  struct spi_nor_controller_ops {
 	int (*erase)(struct spi_nor *nor, loff_t offs);
 };
 
-/**
- * struct spi_nor_locking_ops - SPI NOR locking methods
- * @lock:	lock a region of the SPI NOR.
- * @unlock:	unlock a region of the SPI NOR.
- * @is_locked:	check if a region of the SPI NOR is completely locked
- */
-struct spi_nor_locking_ops {
-	int (*lock)(struct spi_nor *nor, loff_t ofs, uint64_t len);
-	int (*unlock)(struct spi_nor *nor, loff_t ofs, uint64_t len);
-	int (*is_locked)(struct spi_nor *nor, loff_t ofs, uint64_t len);
-};
-
-/**
- * struct spi_nor_flash_parameter - SPI NOR flash parameters and settings.
- * Includes legacy flash parameters and settings that can be overwritten
- * by the spi_nor_fixups hooks, or dynamically when parsing the JESD216
- * Serial Flash Discoverable Parameters (SFDP) tables.
- *
- * @size:		the flash memory density in bytes.
- * @page_size:		the page size of the SPI NOR flash memory.
- * @hwcaps:		describes the read and page program hardware
- *			capabilities.
- * @reads:		read capabilities ordered by priority: the higher index
- *                      in the array, the higher priority.
- * @page_programs:	page program capabilities ordered by priority: the
- *                      higher index in the array, the higher priority.
- * @erase_map:		the erase map parsed from the SFDP Sector Map Parameter
- *                      Table.
- * @quad_enable:	enables SPI NOR quad mode.
- * @set_4byte:		puts the SPI NOR in 4 byte addressing mode.
- * @convert_addr:	converts an absolute address into something the flash
- *                      will understand. Particularly useful when pagesize is
- *                      not a power-of-2.
- * @setup:              configures the SPI NOR memory. Useful for SPI NOR
- *                      flashes that have peculiarities to the SPI NOR standard
- *                      e.g. different opcodes, specific address calculation,
- *                      page size, etc.
- * @locking_ops:	SPI NOR locking methods.
- */
-struct spi_nor_flash_parameter {
-	u64				size;
-	u32				page_size;
-
-	struct spi_nor_hwcaps		hwcaps;
-	struct spi_nor_read_command	reads[SNOR_CMD_READ_MAX];
-	struct spi_nor_pp_command	page_programs[SNOR_CMD_PP_MAX];
 
-	struct spi_nor_erase_map        erase_map;
-
-	int (*quad_enable)(struct spi_nor *nor);
-	int (*set_4byte)(struct spi_nor *nor, bool enable);
-	u32 (*convert_addr)(struct spi_nor *nor, u32 addr);
-	int (*setup)(struct spi_nor *nor, const struct spi_nor_hwcaps *hwcaps);
-
-	const struct spi_nor_locking_ops *locking_ops;
-};
-
-/**
- * struct flash_info - Forward declaration of a structure used internally by
- *		       spi_nor_scan()
+/*
+ * Forward declarations that are used internally by the core and manufacturer
+ * drivers.
  */
 struct flash_info;
-
-/**
- * struct spi_nor_manufacturer - Forward declaration of a structure used
- * internally by the core and manufacturer drivers.
- */
 struct spi_nor_manufacturer;
+struct spi_nor_flash_parameter;
 
 /**
  * struct spi_nor - Structure for defining a the SPI NOR layer
@@ -613,7 +395,7 @@  struct spi_nor {
 
 	const struct spi_nor_controller_ops *controller_ops;
 
-	struct spi_nor_flash_parameter params;
+	struct spi_nor_flash_parameter *params;
 
 	struct {
 		struct spi_mem_dirmap_desc *rdesc;
@@ -623,35 +405,6 @@  struct spi_nor {
 	void *priv;
 };
 
-static u64 __maybe_unused
-spi_nor_region_is_last(const struct spi_nor_erase_region *region)
-{
-	return region->offset & SNOR_LAST_REGION;
-}
-
-static u64 __maybe_unused
-spi_nor_region_end(const struct spi_nor_erase_region *region)
-{
-	return (region->offset & ~SNOR_ERASE_FLAGS_MASK) + region->size;
-}
-
-static void __maybe_unused
-spi_nor_region_mark_end(struct spi_nor_erase_region *region)
-{
-	region->offset |= SNOR_LAST_REGION;
-}
-
-static void __maybe_unused
-spi_nor_region_mark_overlay(struct spi_nor_erase_region *region)
-{
-	region->offset |= SNOR_OVERLAID_REGION;
-}
-
-static bool __maybe_unused spi_nor_has_uniform_erase(const struct spi_nor *nor)
-{
-	return !!nor->params.erase_map.uniform_erase_type;
-}
-
 static inline void spi_nor_set_flash_node(struct spi_nor *nor,
 					  struct device_node *np)
 {