diff --git a/arch/arm/include/asm/arch-omap3/mem.h b/arch/arm/include/asm/arch-omap3/mem.h
index 2ac15ce..025a1f7 100644
--- a/arch/arm/include/asm/arch-omap3/mem.h
+++ b/arch/arm/include/asm/arch-omap3/mem.h
@@ -92,6 +92,29 @@ enum {
 		ACTIM_CTRLB_TXP(b)	|	\
 		ACTIM_CTRLB_TXSR(d)
 
+/* Hynix part of AM/DM37xEVM (200MHz optimized) */
+#define HYNIX_TDAL_200		6
+#define HYNIX_TDPL_200		3
+#define HYNIX_TRRD_200		2
+#define HYNIX_TRCD_200		4
+#define HYNIX_TRP_200		3
+#define HYNIX_TRAS_200		8
+#define HYNIX_TRC_200		11
+#define HYNIX_TRFC_200		18
+#define HYNIX_V_ACTIMA_200	\
+		ACTIM_CTRLA(HYNIX_TRFC_200, HYNIX_TRC_200,	\
+				HYNIX_TRAS_200, HYNIX_TRP_200,	\
+				HYNIX_TRCD_200, HYNIX_TRRD_200,	\
+				HYNIX_TDPL_200, HYNIX_TDAL_200)
+
+#define HYNIX_TWTR_200		2
+#define HYNIX_TCKE_200		1
+#define HYNIX_TXP_200		1
+#define HYNIX_XSR_200		28
+#define HYNIX_V_ACTIMB_200	\
+		ACTIM_CTRLB(HYNIX_TWTR_200, HYNIX_TCKE_200,	\
+				HYNIX_TXP_200, HYNIX_XSR_200)
+
 /* Infineon part of 3430SDP (165MHz optimized) 6.06ns */
 #define INFINEON_TDAL_165	6	/* Twr/Tck + Trp/tck		*/
 					/* 15/6 + 18/6 = 5.5 -> 6	*/
diff --git a/board/ti/evm/config.mk b/board/ti/evm/config.mk
deleted file mode 100644
index d173eef..0000000
--- a/board/ti/evm/config.mk
+++ /dev/null
@@ -1,33 +0,0 @@
-#
-# (C) Copyright 2006 - 2008
-# Texas Instruments, <www.ti.com>
-#
-# EVM uses OMAP3 (ARM-CortexA8) cpu
-# see http://www.ti.com/ for more information on Texas Instruments
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-# Physical Address:
-# 8000'0000 (bank0)
-# A000/0000 (bank1)
-# Linux-Kernel is expected to be at 8000'8000, entry 8000'8000
-# (mem base + reserved)
-
-# For use with external or internal boots.
-CONFIG_SYS_TEXT_BASE = 0x80008000
diff --git a/board/ti/evm/evm.c b/board/ti/evm/evm.c
index 8c43463..ae23ced 100644
--- a/board/ti/evm/evm.c
+++ b/board/ti/evm/evm.c
@@ -1,5 +1,5 @@
 /*
- * (C) Copyright 2004-2008
+ * (C) Copyright 2004-2011
  * Texas Instruments, <www.ti.com>
  *
  * Author :
@@ -37,6 +37,7 @@
 #include <asm/gpio.h>
 #include <i2c.h>
 #include <asm/mach-types.h>
+#include <linux/mtd/nand.h>
 #include "evm.h"
 
 #define OMAP3EVM_GPIO_ETH_RST_GEN1		64
@@ -119,6 +120,43 @@ int board_init(void)
 	return 0;
 }
 
+#ifdef CONFIG_SPL_BUILD
+/*
+ * Routine: get_board_mem_timings
+ * Description: If we use SPL then there is no x-loader nor config header
+ * so we have to setup the DDR timings ourself on the first bank.  This
+ * provides the timing values back to the function that configures
+ * the memory.
+ */
+void get_board_mem_timings(u32 *mcfg, u32 *ctrla, u32 *ctrlb, u32 *rfr_ctrl,
+		u32 *mr)
+{
+	int pop_mfr, pop_id;
+
+	/*
+	 * We need to identify what PoP memory is on the board so that
+	 * we know what timings to use.
+	 */
+	identify_nand_chip(&pop_mfr, &pop_id);
+
+	if (pop_mfr == NAND_MFR_HYNIX && pop_id == 0xbc) {
+		*ctrla = HYNIX_V_ACTIMA_200;
+		*ctrlb = HYNIX_V_ACTIMB_200;
+		*mcfg = 0x03588099;
+	} else {
+		*ctrla = MICRON_V_ACTIMA_165;
+		*ctrlb = MICRON_V_ACTIMB_165;
+		/*
+		 * MICRON_V_MCFG_165 would be correct here except that
+		 * we have 128MB not PHYS_SDRAM_1_SIZE (32MB)
+		 */
+		*mcfg = 0x02584099;
+	}
+	*rfr_ctrl = SDP_3430_SDRC_RFR_CTRL_165MHz;
+	*mr = MICRON_V_MR_165;
+}
+#endif
+
 /*
  * Routine: misc_init_r
  * Description: Init ethernet (done here so udelay works)
@@ -238,7 +276,7 @@ int board_eth_init(bd_t *bis)
 }
 #endif /* CONFIG_CMD_NET */
 
-#ifdef CONFIG_GENERIC_MMC
+#if defined(CONFIG_GENERIC_MMC) && !defined(CONFIG_SPL_BUILD)
 int board_mmc_init(bd_t *bis)
 {
 	omap_mmc_init(0);
diff --git a/include/configs/omap3_evm.h b/include/configs/omap3_evm.h
index 47ec39f..dc611ca 100644
--- a/include/configs/omap3_evm.h
+++ b/include/configs/omap3_evm.h
@@ -84,6 +84,13 @@
 #define CONFIG_GENERIC_MMC
 #define CONFIG_OMAP_HSMMC
 #define CONFIG_DOS_PARTITION
+/* SPL */
+#define CONFIG_SPL_MMC_SUPPORT
+#define CONFIG_SPL_FAT_SUPPORT
+#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR	0x300 /* address 0x60000 */
+#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS	0x200 /* 256 KB */
+#define CONFIG_SYS_MMC_SD_FAT_BOOT_PARTITION	1
+#define CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME	"u-boot.img"
 
 /* USB
  *
@@ -94,6 +101,26 @@
 #define CONFIG_MUSB_HCD
 /* #define CONFIG_MUSB_UDC */
 
+/* NAND SPL */
+#define CONFIG_SPL_NAND_SIMPLE
+#define CONFIG_SPL_NAND_SUPPORT
+#define CONFIG_SYS_NAND_5_ADDR_CYCLE
+#define CONFIG_SYS_NAND_PAGE_COUNT	64
+#define CONFIG_SYS_NAND_PAGE_SIZE	2048
+#define CONFIG_SYS_NAND_OOBSIZE		64
+#define CONFIG_SYS_NAND_BLOCK_SIZE	(128*1024)
+#define CONFIG_SYS_NAND_BAD_BLOCK_POS	0
+#define CONFIG_SYS_NAND_ECCPOS		{2, 3, 4, 5, 6, 7, 8, 9,\
+						10, 11, 12, 13}
+#define CONFIG_SYS_NAND_ECCSIZE		512
+#define CONFIG_SYS_NAND_ECCBYTES	3
+#define CONFIG_SYS_NAND_ECCSTEPS	(CONFIG_SYS_NAND_PAGE_SIZE / \
+						CONFIG_SYS_NAND_ECCSIZE)
+#define CONFIG_SYS_NAND_ECCTOTAL       (CONFIG_SYS_NAND_ECCBYTES * \
+						CONFIG_SYS_NAND_ECCSTEPS)
+#define CONFIG_SYS_NAND_U_BOOT_START   CONFIG_SYS_TEXT_BASE
+#define CONFIG_SYS_NAND_U_BOOT_OFFS	0x80000
+
 /* -----------------------------------------------------------------------------
  * Include common board configuration
  * -----------------------------------------------------------------------------
diff --git a/include/configs/omap3_evm_common.h b/include/configs/omap3_evm_common.h
index 54aa7a7..73ee008 100644
--- a/include/configs/omap3_evm_common.h
+++ b/include/configs/omap3_evm_common.h
@@ -27,7 +27,6 @@
 #define CONFIG_SDRC			/* The chip has SDRC controller */
 
 #define CONFIG_OMAP3_EVM		/* This is a OMAP3 EVM */
-#define CONFIG_OMAP3_MICRON_DDR		/* with MICRON DDR part */
 #define CONFIG_TWL4030_POWER		/* with TWL4030 PMIC */
 
 #undef CONFIG_USE_IRQ			/* no support for IRQs */
@@ -289,4 +288,32 @@
 /* Uncomment to define the board revision statically */
 /* #define CONFIG_STATIC_BOARD_REV	OMAP3EVM_BOARD_GEN_2 */
 
+/* Defines for SPL */
+#define CONFIG_SPL
+#define CONFIG_SPL_TEXT_BASE		0x40200800
+#define CONFIG_SPL_MAX_SIZE		(45 * 1024)	/* 45 KB */
+#define CONFIG_SPL_STACK		LOW_LEVEL_SRAM_STACK
+
+#define CONFIG_SPL_BSS_START_ADDR	0x80000000
+#define CONFIG_SPL_BSS_MAX_SIZE		0x80000		/* 512 KB */
+
+#define CONFIG_SPL_LIBCOMMON_SUPPORT
+#define CONFIG_SPL_LIBDISK_SUPPORT
+#define CONFIG_SPL_I2C_SUPPORT
+#define CONFIG_SPL_LIBGENERIC_SUPPORT
+#define CONFIG_SPL_SERIAL_SUPPORT
+#define CONFIG_SPL_POWER_SUPPORT
+#define CONFIG_SPL_OMAP3_ID_NAND
+#define CONFIG_SPL_LDSCRIPT		"$(CPUDIR)/omap-common/u-boot-spl.lds"
+
+/*
+ * 1MB into the SDRAM to allow for SPL's bss at the beginning of SDRAM
+ * 64 bytes before this address should be set aside for u-boot.img's
+ * header. That is 0x800FFFC0--0x80100000 should not be used for any
+ * other needs.
+ */
+#define CONFIG_SYS_TEXT_BASE		0x80100000
+#define CONFIG_SYS_SPL_MALLOC_START	0x80208000
+#define CONFIG_SYS_SPL_MALLOC_SIZE	0x100000
+
 #endif /* __OMAP3_EVM_COMMON_H */
diff --git a/include/configs/omap3_evm_quick_mmc.h b/include/configs/omap3_evm_quick_mmc.h
index 691e4c2..912da7d 100644
--- a/include/configs/omap3_evm_quick_mmc.h
+++ b/include/configs/omap3_evm_quick_mmc.h
@@ -88,4 +88,14 @@
 	"root=/dev/mmcblk0p2 rw "	\
 	"rootfstype=ext3 rootwait"
 
+/*
+ * SPL
+ */
+#define CONFIG_SPL_MMC_SUPPORT
+#define CONFIG_SPL_FAT_SUPPORT
+#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR	0x300 /* address 0x60000 */
+#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS	0x200 /* 256 KB */
+#define CONFIG_SYS_MMC_SD_FAT_BOOT_PARTITION	1
+#define CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME	"u-boot.img"
+
 #endif /* __OMAP3_EVM_QUICK_MMC_H */
diff --git a/include/configs/omap3_evm_quick_nand.h b/include/configs/omap3_evm_quick_nand.h
index 2d18314..2f879c0 100644
--- a/include/configs/omap3_evm_quick_nand.h
+++ b/include/configs/omap3_evm_quick_nand.h
@@ -76,4 +76,26 @@
 	"root=/dev/mtdblock4 rw "	\
 	"rootfstype=jffs2 "
 
+/*
+ * SPL
+ */
+#define CONFIG_SPL_NAND_SIMPLE
+#define CONFIG_SPL_NAND_SUPPORT
+#define CONFIG_SYS_NAND_5_ADDR_CYCLE
+#define CONFIG_SYS_NAND_PAGE_COUNT	64
+#define CONFIG_SYS_NAND_PAGE_SIZE	2048
+#define CONFIG_SYS_NAND_OOBSIZE		64
+#define CONFIG_SYS_NAND_BLOCK_SIZE	(128*1024)
+#define CONFIG_SYS_NAND_BAD_BLOCK_POS	0
+#define CONFIG_SYS_NAND_ECCPOS		{2, 3, 4, 5, 6, 7, 8, 9,\
+						10, 11, 12, 13}
+#define CONFIG_SYS_NAND_ECCSIZE		512
+#define CONFIG_SYS_NAND_ECCBYTES	3
+#define CONFIG_SYS_NAND_ECCSTEPS	(CONFIG_SYS_NAND_PAGE_SIZE / \
+						CONFIG_SYS_NAND_ECCSIZE)
+#define CONFIG_SYS_NAND_ECCTOTAL       (CONFIG_SYS_NAND_ECCBYTES * \
+						CONFIG_SYS_NAND_ECCSTEPS)
+#define CONFIG_SYS_NAND_U_BOOT_START   CONFIG_SYS_TEXT_BASE
+#define CONFIG_SYS_NAND_U_BOOT_OFFS	0x80000
+
 #endif /* __OMAP3_EVM_QUICK_NAND_H */
