| Message ID | 20200227154354.98663-1-james.hilliard1@gmail.com |
|---|---|
| State | Accepted |
| Headers | show |
| Series | [1/1] package/linux-firmware: add missing symlinks | expand |
James, All, On 2020-02-27 08:43 -0700, James Hilliard spake thusly: > As of upstream commit 9cfefbd7fbdaa5ae769e3061c463f8345d146fb7 > we must manually create symlinks as they are no longer present > in the archive but created at installation. > > Signed-off-by: James Hilliard <james.hilliard1@gmail.com> Applied to master, thanks. Regards, Yann E. MORIN. > --- > package/linux-firmware/linux-firmware.mk | 57 ++++++++++++++++++------ > 1 file changed, 43 insertions(+), 14 deletions(-) > > diff --git a/package/linux-firmware/linux-firmware.mk b/package/linux-firmware/linux-firmware.mk > index fd90f261fa..3ced155e69 100644 > --- a/package/linux-firmware/linux-firmware.mk > +++ b/package/linux-firmware/linux-firmware.mk > @@ -71,9 +71,13 @@ endif > > # rt2xx > ifeq ($(BR2_PACKAGE_LINUX_FIRMWARE_RALINK_RT2XX),y) > -# rt3090.bin is a symlink to rt2860.bin > -# rt3070.bin is a symlink to rt2870.bin > -LINUX_FIRMWARE_FILES += rt2860.bin rt2870.bin rt3070.bin rt3071.bin rt3090.bin > +define LINUX_FIRMWARE_INSTALL_RALINK_RT2XX_SYMLINKS > + ln -sf rt2860.bin \ > + $(TARGET_DIR)/lib/firmware/rt3090.bin > + ln -sf rt2870.bin \ > + $(TARGET_DIR)/lib/firmware/rt3070.bin > +endef > +LINUX_FIRMWARE_FILES += rt2860.bin rt2870.bin rt3071.bin > LINUX_FIRMWARE_ALL_LICENSE_FILES += LICENCE.ralink-firmware.txt > endif > > @@ -214,8 +218,13 @@ endif > > # sd8688 > ifeq ($(BR2_PACKAGE_LINUX_FIRMWARE_LIBERTAS_SD8688),y) > -LINUX_FIRMWARE_FILES += libertas/sd8688.bin libertas/sd8688_helper.bin > -# The two files above are but symlinks to those two ones: > +define LINUX_FIRMWARE_INSTALL_LIBERTAS_SD8688_SYMLINKS > + mkdir -p $(TARGET_DIR)/lib/firmware/libertas > + ln -sf ../mrvl/sd8688.bin \ > + $(TARGET_DIR)/lib/firmware/libertas/sd8688.bin > + ln -sf ../mrvl/sd8688_helper.bin \ > + $(TARGET_DIR)/lib/firmware/libertas/sd8688_helper.bin > +endef > LINUX_FIRMWARE_FILES += mrvl/sd8688.bin mrvl/sd8688_helper.bin > LINUX_FIRMWARE_ALL_LICENSE_FILES += LICENCE.Marvell > endif > @@ -320,12 +329,14 @@ endif > > # wl127x > ifeq ($(BR2_PACKAGE_LINUX_FIRMWARE_TI_WL127X),y) > -# wl1271-nvs.bin is a symlink to wl127x-nvs.bin > +define LINUX_FIRMWARE_INSTALL_TI_WL127X_SYMLINKS > + ln -sf wl127x-nvs.bin \ > + $(TARGET_DIR)/lib/firmware/ti-connectivity/wl1271-nvs.bin > +endef > LINUX_FIRMWARE_FILES += \ > ti-connectivity/wl1271-fw-2.bin \ > ti-connectivity/wl1271-fw-ap.bin \ > ti-connectivity/wl1271-fw.bin \ > - ti-connectivity/wl1271-nvs.bin \ > ti-connectivity/wl127x-fw-3.bin \ > ti-connectivity/wl127x-fw-plt-3.bin \ > ti-connectivity/wl127x-nvs.bin \ > @@ -341,15 +352,18 @@ endif > > # wl128x > ifeq ($(BR2_PACKAGE_LINUX_FIRMWARE_TI_WL128X),y) > -# wl1271-nvs.bin and wl12xx-nvs.bin are symlinks to wl127x-nvs.bin > +define LINUX_FIRMWARE_INSTALL_TI_WL128X_SYMLINKS > + ln -sf wl127x-nvs.bin \ > + $(TARGET_DIR)/lib/firmware/ti-connectivity/wl1271-nvs.bin > + ln -sf wl127x-nvs.bin \ > + $(TARGET_DIR)/lib/firmware/ti-connectivity/wl12xx-nvs.bin > +endef > LINUX_FIRMWARE_FILES += \ > ti-connectivity/wl128x-fw-3.bin \ > ti-connectivity/wl128x-fw-ap.bin \ > ti-connectivity/wl128x-fw-plt-3.bin \ > ti-connectivity/wl128x-fw.bin \ > - ti-connectivity/wl1271-nvs.bin \ > ti-connectivity/wl128x-nvs.bin \ > - ti-connectivity/wl12xx-nvs.bin \ > ti-connectivity/wl127x-nvs.bin \ > ti-connectivity/wl128x-fw-4-mr.bin \ > ti-connectivity/wl128x-fw-4-plt.bin \ > @@ -363,13 +377,15 @@ endif > > # wl18xx > ifeq ($(BR2_PACKAGE_LINUX_FIRMWARE_TI_WL18XX),y) > -# wl1271-nvs.bin is a symlink to wl127x-nvs.bin > +define LINUX_FIRMWARE_INSTALL_TI_WL18XX_SYMLINKS > + ln -sf wl127x-nvs.bin \ > + $(TARGET_DIR)/lib/firmware/ti-connectivity/wl1271-nvs.bin > +endef > LINUX_FIRMWARE_FILES += \ > ti-connectivity/wl18xx-fw.bin \ > ti-connectivity/wl18xx-fw-2.bin \ > ti-connectivity/wl18xx-fw-3.bin \ > ti-connectivity/wl18xx-fw-4.bin \ > - ti-connectivity/wl1271-nvs.bin \ > ti-connectivity/wl127x-nvs.bin \ > ti-connectivity/TIInit_7.2.31.bts > LINUX_FIRMWARE_ALL_LICENSE_FILES += LICENCE.ti-connectivity > @@ -563,8 +579,11 @@ LINUX_FIRMWARE_FILES += \ > endif > > ifeq ($(BR2_PACKAGE_LINUX_FIRMWARE_QAT_DH895XCC),y) > -# qat_mmp.bin is a symlink to qat_895xcc_mmp.bin > -LINUX_FIRMWARE_FILES += qat_895xcc.bin qat_895xcc_mmp.bin qat_mmp.bin > +define LINUX_FIRMWARE_INSTALL_QAT_DH895XCC_SYMLINKS > + ln -sf qat_895xcc_mmp.bin \ > + $(TARGET_DIR)/lib/firmware/qat_mmp.bin > +endef > +LINUX_FIRMWARE_FILES += qat_895xcc.bin qat_895xcc_mmp.bin > LINUX_FIRMWARE_ALL_LICENSE_FILES += LICENCE.qat_firmware > endif > > @@ -597,6 +616,15 @@ define LINUX_FIRMWARE_INSTALL_DIRS > endef > endif > > +define LINUX_FIRMWARE_INSTALL_SYMLINKS > + $(LINUX_FIRMWARE_INSTALL_RALINK_RT2XX_SYMLINKS) > + $(LINUX_FIRMWARE_INSTALL_LIBERTAS_SD8688_SYMLINKS) > + $(LINUX_FIRMWARE_INSTALL_TI_WL127X_SYMLINKS) > + $(LINUX_FIRMWARE_INSTALL_TI_WL128X_SYMLINKS) > + $(LINUX_FIRMWARE_INSTALL_TI_WL18XX_SYMLINKS) > + $(LINUX_FIRMWARE_INSTALL_QAT_DH895XCC_SYMLINKS) > +endef > + > ifneq ($(LINUX_FIRMWARE_FILES)$(LINUX_FIRMWARE_DIRS),) > > # Most firmware files are under a proprietary license, so no need to > @@ -619,6 +647,7 @@ define LINUX_FIRMWARE_INSTALL_TARGET_CMDS > mkdir -p $(TARGET_DIR)/lib/firmware > $(LINUX_FIRMWARE_INSTALL_FILES) > $(LINUX_FIRMWARE_INSTALL_DIRS) > + $(LINUX_FIRMWARE_INSTALL_SYMLINKS) > endef > > $(eval $(generic-package)) > -- > 2.20.1 >
James, All, On 2020-02-27 08:43 -0700, James Hilliard spake thusly: > As of upstream commit 9cfefbd7fbdaa5ae769e3061c463f8345d146fb7 > we must manually create symlinks as they are no longer present > in the archive but created at installation. So, as I said, I've applied this to master, for the imminent release. However, long term, I think we should switch to using the WHENCE file as source for the symlinks. Something like: LINUX_FIRMWARE_DEPENDENCIES += $(BR2_COREUTILS_HOST_DEPENDENCY) define LINUX_FIRMWARE_INSTALL_SYMLINKS $(foreach file,$(LINUX_FIRMWARE_FILES),\ sed -r -e '/^Link: $(file) -> (.+)$/!d; s//\1/' $(@D)/WHENCE \ |while read link; do \ ln -sf --relative $(TARGET_DIR)/lib/firmware/$(file) \ $(TARGET_DIR)/lib/firmware/$(dir $(file))/$${link} || exit 1; \ done$(sep)) endef Note: totally untested, and known to break when the link has a sub-dir component, like: Link: netronome/nic_AMDA0096-0001_2x10.nffw -> nic/nic_AMDA0096-0001_2x10.nffw). Care to have a look, please? Regards, Yann E. MORIN. > Signed-off-by: James Hilliard <james.hilliard1@gmail.com> > --- > package/linux-firmware/linux-firmware.mk | 57 ++++++++++++++++++------ > 1 file changed, 43 insertions(+), 14 deletions(-) > > diff --git a/package/linux-firmware/linux-firmware.mk b/package/linux-firmware/linux-firmware.mk > index fd90f261fa..3ced155e69 100644 > --- a/package/linux-firmware/linux-firmware.mk > +++ b/package/linux-firmware/linux-firmware.mk > @@ -71,9 +71,13 @@ endif > > # rt2xx > ifeq ($(BR2_PACKAGE_LINUX_FIRMWARE_RALINK_RT2XX),y) > -# rt3090.bin is a symlink to rt2860.bin > -# rt3070.bin is a symlink to rt2870.bin > -LINUX_FIRMWARE_FILES += rt2860.bin rt2870.bin rt3070.bin rt3071.bin rt3090.bin > +define LINUX_FIRMWARE_INSTALL_RALINK_RT2XX_SYMLINKS > + ln -sf rt2860.bin \ > + $(TARGET_DIR)/lib/firmware/rt3090.bin > + ln -sf rt2870.bin \ > + $(TARGET_DIR)/lib/firmware/rt3070.bin > +endef > +LINUX_FIRMWARE_FILES += rt2860.bin rt2870.bin rt3071.bin > LINUX_FIRMWARE_ALL_LICENSE_FILES += LICENCE.ralink-firmware.txt > endif > > @@ -214,8 +218,13 @@ endif > > # sd8688 > ifeq ($(BR2_PACKAGE_LINUX_FIRMWARE_LIBERTAS_SD8688),y) > -LINUX_FIRMWARE_FILES += libertas/sd8688.bin libertas/sd8688_helper.bin > -# The two files above are but symlinks to those two ones: > +define LINUX_FIRMWARE_INSTALL_LIBERTAS_SD8688_SYMLINKS > + mkdir -p $(TARGET_DIR)/lib/firmware/libertas > + ln -sf ../mrvl/sd8688.bin \ > + $(TARGET_DIR)/lib/firmware/libertas/sd8688.bin > + ln -sf ../mrvl/sd8688_helper.bin \ > + $(TARGET_DIR)/lib/firmware/libertas/sd8688_helper.bin > +endef > LINUX_FIRMWARE_FILES += mrvl/sd8688.bin mrvl/sd8688_helper.bin > LINUX_FIRMWARE_ALL_LICENSE_FILES += LICENCE.Marvell > endif > @@ -320,12 +329,14 @@ endif > > # wl127x > ifeq ($(BR2_PACKAGE_LINUX_FIRMWARE_TI_WL127X),y) > -# wl1271-nvs.bin is a symlink to wl127x-nvs.bin > +define LINUX_FIRMWARE_INSTALL_TI_WL127X_SYMLINKS > + ln -sf wl127x-nvs.bin \ > + $(TARGET_DIR)/lib/firmware/ti-connectivity/wl1271-nvs.bin > +endef > LINUX_FIRMWARE_FILES += \ > ti-connectivity/wl1271-fw-2.bin \ > ti-connectivity/wl1271-fw-ap.bin \ > ti-connectivity/wl1271-fw.bin \ > - ti-connectivity/wl1271-nvs.bin \ > ti-connectivity/wl127x-fw-3.bin \ > ti-connectivity/wl127x-fw-plt-3.bin \ > ti-connectivity/wl127x-nvs.bin \ > @@ -341,15 +352,18 @@ endif > > # wl128x > ifeq ($(BR2_PACKAGE_LINUX_FIRMWARE_TI_WL128X),y) > -# wl1271-nvs.bin and wl12xx-nvs.bin are symlinks to wl127x-nvs.bin > +define LINUX_FIRMWARE_INSTALL_TI_WL128X_SYMLINKS > + ln -sf wl127x-nvs.bin \ > + $(TARGET_DIR)/lib/firmware/ti-connectivity/wl1271-nvs.bin > + ln -sf wl127x-nvs.bin \ > + $(TARGET_DIR)/lib/firmware/ti-connectivity/wl12xx-nvs.bin > +endef > LINUX_FIRMWARE_FILES += \ > ti-connectivity/wl128x-fw-3.bin \ > ti-connectivity/wl128x-fw-ap.bin \ > ti-connectivity/wl128x-fw-plt-3.bin \ > ti-connectivity/wl128x-fw.bin \ > - ti-connectivity/wl1271-nvs.bin \ > ti-connectivity/wl128x-nvs.bin \ > - ti-connectivity/wl12xx-nvs.bin \ > ti-connectivity/wl127x-nvs.bin \ > ti-connectivity/wl128x-fw-4-mr.bin \ > ti-connectivity/wl128x-fw-4-plt.bin \ > @@ -363,13 +377,15 @@ endif > > # wl18xx > ifeq ($(BR2_PACKAGE_LINUX_FIRMWARE_TI_WL18XX),y) > -# wl1271-nvs.bin is a symlink to wl127x-nvs.bin > +define LINUX_FIRMWARE_INSTALL_TI_WL18XX_SYMLINKS > + ln -sf wl127x-nvs.bin \ > + $(TARGET_DIR)/lib/firmware/ti-connectivity/wl1271-nvs.bin > +endef > LINUX_FIRMWARE_FILES += \ > ti-connectivity/wl18xx-fw.bin \ > ti-connectivity/wl18xx-fw-2.bin \ > ti-connectivity/wl18xx-fw-3.bin \ > ti-connectivity/wl18xx-fw-4.bin \ > - ti-connectivity/wl1271-nvs.bin \ > ti-connectivity/wl127x-nvs.bin \ > ti-connectivity/TIInit_7.2.31.bts > LINUX_FIRMWARE_ALL_LICENSE_FILES += LICENCE.ti-connectivity > @@ -563,8 +579,11 @@ LINUX_FIRMWARE_FILES += \ > endif > > ifeq ($(BR2_PACKAGE_LINUX_FIRMWARE_QAT_DH895XCC),y) > -# qat_mmp.bin is a symlink to qat_895xcc_mmp.bin > -LINUX_FIRMWARE_FILES += qat_895xcc.bin qat_895xcc_mmp.bin qat_mmp.bin > +define LINUX_FIRMWARE_INSTALL_QAT_DH895XCC_SYMLINKS > + ln -sf qat_895xcc_mmp.bin \ > + $(TARGET_DIR)/lib/firmware/qat_mmp.bin > +endef > +LINUX_FIRMWARE_FILES += qat_895xcc.bin qat_895xcc_mmp.bin > LINUX_FIRMWARE_ALL_LICENSE_FILES += LICENCE.qat_firmware > endif > > @@ -597,6 +616,15 @@ define LINUX_FIRMWARE_INSTALL_DIRS > endef > endif > > +define LINUX_FIRMWARE_INSTALL_SYMLINKS > + $(LINUX_FIRMWARE_INSTALL_RALINK_RT2XX_SYMLINKS) > + $(LINUX_FIRMWARE_INSTALL_LIBERTAS_SD8688_SYMLINKS) > + $(LINUX_FIRMWARE_INSTALL_TI_WL127X_SYMLINKS) > + $(LINUX_FIRMWARE_INSTALL_TI_WL128X_SYMLINKS) > + $(LINUX_FIRMWARE_INSTALL_TI_WL18XX_SYMLINKS) > + $(LINUX_FIRMWARE_INSTALL_QAT_DH895XCC_SYMLINKS) > +endef > + > ifneq ($(LINUX_FIRMWARE_FILES)$(LINUX_FIRMWARE_DIRS),) > > # Most firmware files are under a proprietary license, so no need to > @@ -619,6 +647,7 @@ define LINUX_FIRMWARE_INSTALL_TARGET_CMDS > mkdir -p $(TARGET_DIR)/lib/firmware > $(LINUX_FIRMWARE_INSTALL_FILES) > $(LINUX_FIRMWARE_INSTALL_DIRS) > + $(LINUX_FIRMWARE_INSTALL_SYMLINKS) > endef > > $(eval $(generic-package)) > -- > 2.20.1 >
diff --git a/package/linux-firmware/linux-firmware.mk b/package/linux-firmware/linux-firmware.mk index fd90f261fa..3ced155e69 100644 --- a/package/linux-firmware/linux-firmware.mk +++ b/package/linux-firmware/linux-firmware.mk @@ -71,9 +71,13 @@ endif # rt2xx ifeq ($(BR2_PACKAGE_LINUX_FIRMWARE_RALINK_RT2XX),y) -# rt3090.bin is a symlink to rt2860.bin -# rt3070.bin is a symlink to rt2870.bin -LINUX_FIRMWARE_FILES += rt2860.bin rt2870.bin rt3070.bin rt3071.bin rt3090.bin +define LINUX_FIRMWARE_INSTALL_RALINK_RT2XX_SYMLINKS + ln -sf rt2860.bin \ + $(TARGET_DIR)/lib/firmware/rt3090.bin + ln -sf rt2870.bin \ + $(TARGET_DIR)/lib/firmware/rt3070.bin +endef +LINUX_FIRMWARE_FILES += rt2860.bin rt2870.bin rt3071.bin LINUX_FIRMWARE_ALL_LICENSE_FILES += LICENCE.ralink-firmware.txt endif @@ -214,8 +218,13 @@ endif # sd8688 ifeq ($(BR2_PACKAGE_LINUX_FIRMWARE_LIBERTAS_SD8688),y) -LINUX_FIRMWARE_FILES += libertas/sd8688.bin libertas/sd8688_helper.bin -# The two files above are but symlinks to those two ones: +define LINUX_FIRMWARE_INSTALL_LIBERTAS_SD8688_SYMLINKS + mkdir -p $(TARGET_DIR)/lib/firmware/libertas + ln -sf ../mrvl/sd8688.bin \ + $(TARGET_DIR)/lib/firmware/libertas/sd8688.bin + ln -sf ../mrvl/sd8688_helper.bin \ + $(TARGET_DIR)/lib/firmware/libertas/sd8688_helper.bin +endef LINUX_FIRMWARE_FILES += mrvl/sd8688.bin mrvl/sd8688_helper.bin LINUX_FIRMWARE_ALL_LICENSE_FILES += LICENCE.Marvell endif @@ -320,12 +329,14 @@ endif # wl127x ifeq ($(BR2_PACKAGE_LINUX_FIRMWARE_TI_WL127X),y) -# wl1271-nvs.bin is a symlink to wl127x-nvs.bin +define LINUX_FIRMWARE_INSTALL_TI_WL127X_SYMLINKS + ln -sf wl127x-nvs.bin \ + $(TARGET_DIR)/lib/firmware/ti-connectivity/wl1271-nvs.bin +endef LINUX_FIRMWARE_FILES += \ ti-connectivity/wl1271-fw-2.bin \ ti-connectivity/wl1271-fw-ap.bin \ ti-connectivity/wl1271-fw.bin \ - ti-connectivity/wl1271-nvs.bin \ ti-connectivity/wl127x-fw-3.bin \ ti-connectivity/wl127x-fw-plt-3.bin \ ti-connectivity/wl127x-nvs.bin \ @@ -341,15 +352,18 @@ endif # wl128x ifeq ($(BR2_PACKAGE_LINUX_FIRMWARE_TI_WL128X),y) -# wl1271-nvs.bin and wl12xx-nvs.bin are symlinks to wl127x-nvs.bin +define LINUX_FIRMWARE_INSTALL_TI_WL128X_SYMLINKS + ln -sf wl127x-nvs.bin \ + $(TARGET_DIR)/lib/firmware/ti-connectivity/wl1271-nvs.bin + ln -sf wl127x-nvs.bin \ + $(TARGET_DIR)/lib/firmware/ti-connectivity/wl12xx-nvs.bin +endef LINUX_FIRMWARE_FILES += \ ti-connectivity/wl128x-fw-3.bin \ ti-connectivity/wl128x-fw-ap.bin \ ti-connectivity/wl128x-fw-plt-3.bin \ ti-connectivity/wl128x-fw.bin \ - ti-connectivity/wl1271-nvs.bin \ ti-connectivity/wl128x-nvs.bin \ - ti-connectivity/wl12xx-nvs.bin \ ti-connectivity/wl127x-nvs.bin \ ti-connectivity/wl128x-fw-4-mr.bin \ ti-connectivity/wl128x-fw-4-plt.bin \ @@ -363,13 +377,15 @@ endif # wl18xx ifeq ($(BR2_PACKAGE_LINUX_FIRMWARE_TI_WL18XX),y) -# wl1271-nvs.bin is a symlink to wl127x-nvs.bin +define LINUX_FIRMWARE_INSTALL_TI_WL18XX_SYMLINKS + ln -sf wl127x-nvs.bin \ + $(TARGET_DIR)/lib/firmware/ti-connectivity/wl1271-nvs.bin +endef LINUX_FIRMWARE_FILES += \ ti-connectivity/wl18xx-fw.bin \ ti-connectivity/wl18xx-fw-2.bin \ ti-connectivity/wl18xx-fw-3.bin \ ti-connectivity/wl18xx-fw-4.bin \ - ti-connectivity/wl1271-nvs.bin \ ti-connectivity/wl127x-nvs.bin \ ti-connectivity/TIInit_7.2.31.bts LINUX_FIRMWARE_ALL_LICENSE_FILES += LICENCE.ti-connectivity @@ -563,8 +579,11 @@ LINUX_FIRMWARE_FILES += \ endif ifeq ($(BR2_PACKAGE_LINUX_FIRMWARE_QAT_DH895XCC),y) -# qat_mmp.bin is a symlink to qat_895xcc_mmp.bin -LINUX_FIRMWARE_FILES += qat_895xcc.bin qat_895xcc_mmp.bin qat_mmp.bin +define LINUX_FIRMWARE_INSTALL_QAT_DH895XCC_SYMLINKS + ln -sf qat_895xcc_mmp.bin \ + $(TARGET_DIR)/lib/firmware/qat_mmp.bin +endef +LINUX_FIRMWARE_FILES += qat_895xcc.bin qat_895xcc_mmp.bin LINUX_FIRMWARE_ALL_LICENSE_FILES += LICENCE.qat_firmware endif @@ -597,6 +616,15 @@ define LINUX_FIRMWARE_INSTALL_DIRS endef endif +define LINUX_FIRMWARE_INSTALL_SYMLINKS + $(LINUX_FIRMWARE_INSTALL_RALINK_RT2XX_SYMLINKS) + $(LINUX_FIRMWARE_INSTALL_LIBERTAS_SD8688_SYMLINKS) + $(LINUX_FIRMWARE_INSTALL_TI_WL127X_SYMLINKS) + $(LINUX_FIRMWARE_INSTALL_TI_WL128X_SYMLINKS) + $(LINUX_FIRMWARE_INSTALL_TI_WL18XX_SYMLINKS) + $(LINUX_FIRMWARE_INSTALL_QAT_DH895XCC_SYMLINKS) +endef + ifneq ($(LINUX_FIRMWARE_FILES)$(LINUX_FIRMWARE_DIRS),) # Most firmware files are under a proprietary license, so no need to @@ -619,6 +647,7 @@ define LINUX_FIRMWARE_INSTALL_TARGET_CMDS mkdir -p $(TARGET_DIR)/lib/firmware $(LINUX_FIRMWARE_INSTALL_FILES) $(LINUX_FIRMWARE_INSTALL_DIRS) + $(LINUX_FIRMWARE_INSTALL_SYMLINKS) endef $(eval $(generic-package))
As of upstream commit 9cfefbd7fbdaa5ae769e3061c463f8345d146fb7 we must manually create symlinks as they are no longer present in the archive but created at installation. Signed-off-by: James Hilliard <james.hilliard1@gmail.com> --- package/linux-firmware/linux-firmware.mk | 57 ++++++++++++++++++------ 1 file changed, 43 insertions(+), 14 deletions(-)