[02/15] spi: set mode bits for "spi-rx-dtr" and "spi-tx-dtr"
diff mbox series

Message ID 20200226125606.22684-3-p.yadav@ti.com
State Superseded
Delegated to: Jagannadha Sutradharudu Teki
Headers show
Series
  • mtd: spi-nor-core: add xSPI Octal DTR support
Related show

Commit Message

Pratyush Yadav Feb. 26, 2020, 12:55 p.m. UTC
These two DT properties express DTR receive and transmit capabilities of
a SPI flash and controller. Introduce two new mode bits: SPI_RX_DTR and
SPI_TX_DTR which correspond to the new DT properties. Set these bits
when the two corresponding properties are present in the device tree.

Signed-off-by: Pratyush Yadav <p.yadav@ti.com>
---
 drivers/spi/spi-uclass.c | 9 +++++++++
 include/spi.h            | 2 ++
 2 files changed, 11 insertions(+)

Patch
diff mbox series

diff --git a/drivers/spi/spi-uclass.c b/drivers/spi/spi-uclass.c
index 4a02d95a34..74e4b5b3ad 100644
--- a/drivers/spi/spi-uclass.c
+++ b/drivers/spi/spi-uclass.c
@@ -435,6 +435,7 @@  int spi_slave_ofdata_to_platdata(struct udevice *dev,
 {
 	int mode = 0;
 	int value;
+	bool dtr;
 
 	plat->cs = dev_read_u32_default(dev, "reg", -1);
 	plat->max_hz = dev_read_u32_default(dev, "spi-max-frequency",
@@ -487,6 +488,14 @@  int spi_slave_ofdata_to_platdata(struct udevice *dev,
 		break;
 	}
 
+	dtr = dev_read_bool(dev, "spi-rx-dtr");
+	if (dtr)
+		mode |= SPI_RX_DTR;
+
+	dtr = dev_read_bool(dev, "spi-tx-dtr");
+	if (dtr)
+		mode |= SPI_TX_DTR;
+
 	plat->mode = mode;
 
 	return 0;
diff --git a/include/spi.h b/include/spi.h
index 852f570eaa..64558a5145 100644
--- a/include/spi.h
+++ b/include/spi.h
@@ -32,6 +32,8 @@ 
 #define SPI_RX_QUAD	BIT(13)			/* receive with 4 wires */
 #define SPI_TX_OCTAL	BIT(14)			/* transmit with 8 wires */
 #define SPI_RX_OCTAL	BIT(15)			/* receive with 8 wires */
+#define SPI_TX_DTR	BIT(16)			/* transmit in DTR protocol */
+#define SPI_RX_DTR	BIT(17)			/* receive in DTR protocol */
 
 /* Header byte that marks the start of the message */
 #define SPI_PREAMBLE_END_BYTE	0xec