diff mbox series

[v1,35/40] i2c: st: Use generic definitions for bus frequencies

Message ID 20200224151530.31713-35-andriy.shevchenko@linux.intel.com
State Superseded
Headers show
Series [v1,01/40] i2c: qup: Move bus frequency definitions to i2c.h | expand

Commit Message

Andy Shevchenko Feb. 24, 2020, 3:15 p.m. UTC 
Since we have generic definitions for bus frequencies, let's use them.

Cc: Patrice Chotard <patrice.chotard@st.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
 drivers/i2c/busses/i2c-st.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)
diff mbox series

Patch

diff --git a/drivers/i2c/busses/i2c-st.c b/drivers/i2c/busses/i2c-st.c
index 54e1fc8a495e..441fc2245f25 100644
--- a/drivers/i2c/busses/i2c-st.c
+++ b/drivers/i2c/busses/i2c-st.c
@@ -213,7 +213,7 @@  static inline void st_i2c_clr_bits(void __iomem *reg, u32 mask)
  */
 static struct st_i2c_timings i2c_timings[] = {
 	[I2C_MODE_STANDARD] = {
-		.rate			= 100000,
+		.rate			= I2C_STANDARD_MODE_FREQ,
 		.rep_start_hold		= 4400,
 		.rep_start_setup	= 5170,
 		.start_hold		= 4400,
@@ -222,7 +222,7 @@  static struct st_i2c_timings i2c_timings[] = {
 		.bus_free_time		= 5170,
 	},
 	[I2C_MODE_FAST] = {
-		.rate			= 400000,
+		.rate			= I2C_FAST_MODE_FREQ,
 		.rep_start_hold		= 660,
 		.rep_start_setup	= 660,
 		.start_hold		= 660,
@@ -835,7 +835,7 @@  static int st_i2c_probe(struct platform_device *pdev)
 
 	i2c_dev->mode = I2C_MODE_STANDARD;
 	ret = of_property_read_u32(np, "clock-frequency", &clk_rate);
-	if ((!ret) && (clk_rate == 400000))
+	if (!ret && (clk_rate == I2C_FAST_MODE_FREQ))
 		i2c_dev->mode = I2C_MODE_FAST;
 
 	i2c_dev->dev = &pdev->dev;