From patchwork Mon Feb 24 11:35:05 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: "Pratik R. Sampat" X-Patchwork-Id: 1243007 Return-Path: X-Original-To: incoming@patchwork.ozlabs.org Delivered-To: patchwork-incoming@bilbo.ozlabs.org Received: from lists.ozlabs.org (lists.ozlabs.org [203.11.71.2]) (using TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits) key-exchange X25519 server-signature RSA-PSS (4096 bits) server-digest SHA256) (No client certificate requested) by ozlabs.org (Postfix) with ESMTPS id 48R0Pq3Zz0z9sP7 for ; Mon, 24 Feb 2020 22:36:15 +1100 (AEDT) Authentication-Results: ozlabs.org; dmarc=none (p=none dis=none) header.from=linux.ibm.com Received: from lists.ozlabs.org (lists.ozlabs.org [IPv6:2401:3900:2:1::3]) by lists.ozlabs.org (Postfix) with ESMTP id 48R0Pq0q8hzDqMd for ; Mon, 24 Feb 2020 22:36:15 +1100 (AEDT) X-Original-To: skiboot@lists.ozlabs.org Delivered-To: skiboot@lists.ozlabs.org Authentication-Results: lists.ozlabs.org; spf=pass (sender SPF authorized) smtp.mailfrom=linux.ibm.com (client-ip=148.163.156.1; helo=mx0a-001b2d01.pphosted.com; envelope-from=psampat@linux.ibm.com; receiver=) Authentication-Results: lists.ozlabs.org; dmarc=none (p=none dis=none) header.from=linux.ibm.com Received: from mx0a-001b2d01.pphosted.com (mx0a-001b2d01.pphosted.com [148.163.156.1]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by lists.ozlabs.org (Postfix) with ESMTPS id 48R0Ns0318zDqM0 for ; Mon, 24 Feb 2020 22:35:24 +1100 (AEDT) Received: from pps.filterd (m0098399.ppops.net [127.0.0.1]) by mx0a-001b2d01.pphosted.com (8.16.0.42/8.16.0.42) with SMTP id 01OBT5a3035022 for ; Mon, 24 Feb 2020 06:35:23 -0500 Received: from e06smtp04.uk.ibm.com (e06smtp04.uk.ibm.com [195.75.94.100]) by mx0a-001b2d01.pphosted.com with ESMTP id 2yb1b759s4-1 (version=TLSv1.2 cipher=AES256-GCM-SHA384 bits=256 verify=NOT) for ; Mon, 24 Feb 2020 06:35:22 -0500 Received: from localhost by e06smtp04.uk.ibm.com with IBM ESMTP SMTP Gateway: Authorized Use Only! Violators will be prosecuted for from ; Mon, 24 Feb 2020 11:35:20 -0000 Received: from b06avi18878370.portsmouth.uk.ibm.com (9.149.26.194) by e06smtp04.uk.ibm.com (192.168.101.134) with IBM ESMTP SMTP Gateway: Authorized Use Only! Violators will be prosecuted; (version=TLSv1/SSLv3 cipher=AES256-GCM-SHA384 bits=256/256) Mon, 24 Feb 2020 11:35:16 -0000 Received: from d06av25.portsmouth.uk.ibm.com (d06av25.portsmouth.uk.ibm.com [9.149.105.61]) by b06avi18878370.portsmouth.uk.ibm.com (8.14.9/8.14.9/NCO v10.0) with ESMTP id 01OBZCTJ32833954 (version=TLSv1/SSLv3 cipher=DHE-RSA-AES256-GCM-SHA384 bits=256 verify=OK); Mon, 24 Feb 2020 11:35:13 GMT Received: from d06av25.portsmouth.uk.ibm.com (unknown [127.0.0.1]) by IMSVA (Postfix) with ESMTP id C7CFA11C058; Mon, 24 Feb 2020 11:35:12 +0000 (GMT) Received: from d06av25.portsmouth.uk.ibm.com (unknown [127.0.0.1]) by IMSVA (Postfix) with ESMTP id 0D72A11C06F; Mon, 24 Feb 2020 11:35:11 +0000 (GMT) Received: from pratiks-thinkpad.in.ibm.com (unknown [9.124.31.88]) by d06av25.portsmouth.uk.ibm.com (Postfix) with ESMTP; Mon, 24 Feb 2020 11:35:10 +0000 (GMT) From: Pratik Rajesh Sampat To: skiboot@lists.ozlabs.org, oohall@gmail.com, ego@linux.vnet.ibm.com, svaidy@linux.ibm.com, premjha2@in.ibm.com, akshay.adiga@linux.vnet.ibm.com, pratik.sampat@in.ibm.com, psampat@linux.ibm.com Date: Mon, 24 Feb 2020 17:05:05 +0530 X-Mailer: git-send-email 2.24.1 In-Reply-To: References: MIME-Version: 1.0 X-TM-AS-GCONF: 00 x-cbid: 20022411-0016-0000-0000-000002E9C117 X-IBM-AV-DETECTION: SAVI=unused REMOTE=unused XFE=unused x-cbparentid: 20022411-0017-0000-0000-0000334CE7EB Message-Id: <75d9032e0b9df432594aaf2fcfca254b6daa42b9.1582543347.git.psampat@linux.ibm.com> X-Proofpoint-Virus-Version: vendor=fsecure engine=2.50.10434:6.0.138, 18.0.572 definitions=2020-02-24_02:2020-02-21, 2020-02-24 signatures=0 X-Proofpoint-Spam-Details: rule=outbound_notspam policy=outbound score=0 spamscore=0 mlxscore=0 malwarescore=0 phishscore=0 mlxlogscore=999 lowpriorityscore=0 bulkscore=0 adultscore=0 impostorscore=0 clxscore=1015 priorityscore=1501 suspectscore=0 classifier=spam adjust=0 reason=mlx scancount=1 engine=8.12.0-2001150001 definitions=main-2002240097 Subject: [Skiboot] [PATCH v5 1/4] Self Save: Introducing Support for SPR Self Save X-BeenThere: skiboot@lists.ozlabs.org X-Mailman-Version: 2.1.29 Precedence: list List-Id: Mailing list for skiboot development List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Errors-To: skiboot-bounces+incoming=patchwork.ozlabs.org@lists.ozlabs.org Sender: "Skiboot" From: Prem Shanker Jha The commit is a merger of commits that makes the following changes: 1. Commit fixes some issues with code found during integration test - replacement of addi with xor instruction during self save API. - fixing instruction generation for MFMSR during self save - data struct updates in STOP API - error RC updates for hcode image build - HOMER parser updates. - removed self save support for URMOR and HRMOR - code changes for compilation with OPAL - populating CME Image header with unsecure HOMER address. Key_Cronus_Test=PM_REGRESS Change-Id: I7cedcc466267c4245255d8d75c01ed695e316720 Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/66580 Tested-by: FSP CI Jenkins Tested-by: HWSV CI Tested-by: PPE CI Tested-by: Jenkins Server Tested-by: Cronus HW CI Tested-by: Hostboot CI Reviewed-by: Gregory S. Still Reviewed-by: RAHUL BATRA Reviewed-by: Jennifer A. Stofer Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/66587 Reviewed-by: Christian R. Geddes Signed-off-by: Prem Shanker Jha Signed-off-by: Akshay Adiga Signed-off-by: Pratik Rajesh Sampat 2. The commit also incorporates changes that make STOP API project agnostic changes include defining wrapper functions which call legacy API. It also adds duplicate enum members which start with prefix PROC instead of P9. Key_Cronus_Test=PM_REGRESS Change-Id: If87970f3e8cf9b507f33eb1be249e03eb3836a5e RTC: 201128 Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/71307 Tested-by: FSP CI Jenkins Tested-by: Jenkins Server Tested-by: Hostboot CI Tested-by: Cronus HW CI Reviewed-by: RANGANATHPRASAD G. BRAHMASAMUDRA Reviewed-by: Gregory S. Still Reviewed-by: Jennifer A Stofer Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/71314 Tested-by: Jenkins OP Build CI Tested-by: Jenkins OP HW Reviewed-by: Daniel M. Crowell Signed-off-by: Prem Shanker Jha Signed-off-by: Pratik Rajesh Sampat --- include/p9_stop_api.H | 79 +- libpore/p9_cpu_reg_restore_instruction.H | 4 + libpore/p9_stop_api.C | 954 +++++++++++++---------- libpore/p9_stop_api.H | 115 ++- libpore/p9_stop_data_struct.H | 4 +- libpore/p9_stop_util.H | 7 +- 6 files changed, 721 insertions(+), 442 deletions(-) diff --git a/include/p9_stop_api.H b/include/p9_stop_api.H index 79abd000..9d3bc1e5 100644 --- a/include/p9_stop_api.H +++ b/include/p9_stop_api.H @@ -63,6 +63,26 @@ typedef enum P9_STOP_SPR_PMCR = 884, // core register P9_STOP_SPR_HID = 1008, // core register P9_STOP_SPR_MSR = 2000, // thread register + + //enum members which are project agnostic + PROC_STOP_SPR_DAWR = 180, // thread register + PROC_STOP_SPR_CIABR = 187, // thread register + PROC_STOP_SPR_DAWRX = 188, // thread register + PROC_STOP_SPR_HSPRG0 = 304, // thread register + PROC_STOP_SPR_HRMOR = 313, // core register + PROC_STOP_SPR_LPCR = 318, // thread register + PROC_STOP_SPR_HMEER = 337, // core register + PROC_STOP_SPR_PTCR = 464, // core register + PROC_STOP_SPR_USPRG0 = 496, // thread register + PROC_STOP_SPR_USPRG1 = 497, // thread register + PROC_STOP_SPR_URMOR = 505, // core register + PROC_STOP_SPR_SMFCTRL = 511, // thread register + PROC_STOP_SPR_LDBAR = 850, // thread register + PROC_STOP_SPR_PSSCR = 855, // thread register + PROC_STOP_SPR_PMCR = 884, // core register + PROC_STOP_SPR_HID = 1008, // core register + PROC_STOP_SPR_MSR = 2000, // thread register + } CpuReg_t; /** @@ -85,6 +105,8 @@ typedef enum STOP_SAVE_SCOM_ENTRY_UPDATE_FAILED = 12, STOP_SAVE_INVALID_FUSED_CORE_STATUS = 13, STOP_SAVE_FAIL = 14, // for internal failure within firmware. + STOP_SAVE_SPR_ENTRY_MISSING = 15, + STOP_SAVE_SPR_BIT_POS_RESERVE = 16, } StopReturnCode_t; /** @@ -101,7 +123,20 @@ typedef enum P9_STOP_SCOM_RESET = 6, P9_STOP_SCOM_OR_APPEND = 7, P9_STOP_SCOM_AND_APPEND = 8, - P9_STOP_SCOM_OP_MAX = 9 + P9_STOP_SCOM_OP_MAX = 9, + + //enum members which are project agnostic + PROC_STOP_SCOM_OP_MIN = 0, + PROC_STOP_SCOM_APPEND = 1, + PROC_STOP_SCOM_REPLACE = 2, + PROC_STOP_SCOM_OR = 3, + PROC_STOP_SCOM_AND = 4, + PROC_STOP_SCOM_NOOP = 5, + PROC_STOP_SCOM_RESET = 6, + PROC_STOP_SCOM_OR_APPEND = 7, + PROC_STOP_SCOM_AND_APPEND = 8, + PROC_STOP_SCOM_OP_MAX = 9, + } ScomOperation_t; /** @@ -114,9 +149,49 @@ typedef enum P9_STOP_SECTION_EQ_SCOM = 2, P9_STOP_SECTION_L2 = 3, P9_STOP_SECTION_L3 = 4, - P9_STOP_SECTION_MAX = 5 + P9_STOP_SECTION_MAX = 5, + + //enum members which are project agnostic + PROC_STOP_SECTION_MIN = 0, + PROC_STOP_SECTION_CORE_SCOM = 1, + PROC_STOP_SECTION_EQ_SCOM = 2, + PROC_STOP_SECTION_L2 = 3, + PROC_STOP_SECTION_L3 = 4, + PROC_STOP_SECTION_MAX = 5, + } ScomSection_t; + + +/** + * @brief List of major incompatibilities between API version. + * @note STOP APIs assumes a specific HOMER layout, certain + * level of CME-SGPE hcode and certain version of self-save restore + * binary. A mismatch can break STOP function. + */ + +/** + * @brief Summarizes bit position allocated to SPRs in save bit mask vector. + */ +typedef enum +{ + BIT_POS_CIABR = 0, + BIT_POS_DAWR = 1, + BIT_POS_DAWRX = 2, + BIT_POS_HSPRG0 = 3, + BIT_POS_LDBAR = 4, + BIT_POS_LPCR = 5, + BIT_POS_PSSCR = 6, + BIT_POS_MSR = 7, + BIT_POS_HID = 21, + BIT_POS_HMEER = 22, + BIT_POS_PMCR = 23, + BIT_POS_PTCR = 24, + BIT_POS_SMFCTRL = 28, + BIT_POS_USPRG0 = 29, + BIT_POS_USPRG1 = 30, +} SprBitPositionList_t; + #ifdef __cplusplus extern "C" { #endif diff --git a/libpore/p9_cpu_reg_restore_instruction.H b/libpore/p9_cpu_reg_restore_instruction.H index cf00ff5e..d69a4212 100644 --- a/libpore/p9_cpu_reg_restore_instruction.H +++ b/libpore/p9_cpu_reg_restore_instruction.H @@ -62,6 +62,10 @@ enum MTSPR_CONST1 = 467, MTMSRD_CONST1 = 178, MFSPR_CONST = 339, + BLR_INST = 0x4e800020, + MTSPR_BASE_OPCODE = 0x7c0003a6, + MFSPR_BASE_OPCODE = 0x7c0002a6, + ATTN_OPCODE = 0x00000200, OPCODE_18 = 18, SELF_SAVE_FUNC_ADD = 0x2300, SELF_SAVE_OFFSET = 0x180, diff --git a/libpore/p9_stop_api.C b/libpore/p9_stop_api.C index 33aaf788..2d9bb549 100644 --- a/libpore/p9_stop_api.C +++ b/libpore/p9_stop_api.C @@ -54,33 +54,33 @@ namespace stopImageSection const StopSprReg_t g_sprRegister[] = { - { P9_STOP_SPR_CIABR, true, 0 }, - { P9_STOP_SPR_DAWR, true, 1 }, - { P9_STOP_SPR_DAWRX, true, 2 }, - { P9_STOP_SPR_HSPRG0, true, 3 }, - { P9_STOP_SPR_LDBAR, true, 4, }, - { P9_STOP_SPR_LPCR, true, 5 }, - { P9_STOP_SPR_PSSCR, true, 6 }, - { P9_STOP_SPR_MSR, true, 7 }, - { P9_STOP_SPR_HRMOR, false, 20 }, - { P9_STOP_SPR_HID, false, 21 }, - { P9_STOP_SPR_HMEER, false, 22 }, - { P9_STOP_SPR_PMCR, false, 23 }, - { P9_STOP_SPR_PTCR, false, 24 }, - { P9_STOP_SPR_SMFCTRL, true, 28 }, - { P9_STOP_SPR_USPRG0, true, 29 }, - { P9_STOP_SPR_USPRG1, true, 30 }, - { P9_STOP_SPR_URMOR, false, 31 }, + { P9_STOP_SPR_CIABR, true, 0 }, + { P9_STOP_SPR_DAWR, true, 1 }, + { P9_STOP_SPR_DAWRX, true, 2 }, + { P9_STOP_SPR_HSPRG0, true, 3 }, + { P9_STOP_SPR_LDBAR, true, 4, }, + { P9_STOP_SPR_LPCR, true, 5 }, + { P9_STOP_SPR_PSSCR, true, 6 }, + { P9_STOP_SPR_MSR, true, 7 }, + { P9_STOP_SPR_HRMOR, false, 255 }, + { P9_STOP_SPR_HID, false, 21 }, + { P9_STOP_SPR_HMEER, false, 22 }, + { P9_STOP_SPR_PMCR, false, 23 }, + { P9_STOP_SPR_PTCR, false, 24 }, + { P9_STOP_SPR_SMFCTRL, true, 28 }, + { P9_STOP_SPR_USPRG0, true, 29 }, + { P9_STOP_SPR_USPRG1, true, 30 }, + { P9_STOP_SPR_URMOR, false, 255 }, }; -const uint32_t MAX_SPR_SUPPORTED = 17; +const uint32_t MAX_SPR_SUPPORTED = 17; const uint32_t LEGACY_CORE_SCOM_SUPPORTED = 15; const uint32_t LEGACY_QUAD_SCOM_SUPPORTED = 63; //----------------------------------------------------------------------------- /** - * @brief vaildated input arguments passed to p9_stop_save_cpureg_control. + * @brief validated input arguments passed to p9_stop_save_cpureg_control. * @param[in] i_pImage point to start of HOMER * @param[in] i_coreId id of the core * @param[in] i_threadId id of the thread @@ -255,7 +255,7 @@ STATIC uint32_t getOriInstruction( const uint16_t i_Rs, const uint16_t i_Ra, */ STATIC uint32_t genKeyForSprLookup( const CpuReg_t i_regId ) { - return getOriInstruction( 0, 0, (uint16_t) i_regId ); + return getOriInstruction( 24, 0, (uint16_t) i_regId ); } //----------------------------------------------------------------------------- @@ -330,7 +330,7 @@ STATIC uint32_t getMtsprInstruction( const uint16_t i_Rs, const uint16_t i_Spr ) */ STATIC uint32_t getMfmsrInstruction( const uint16_t i_Rt ) { - uint32_t mfmsrInstOpcode = ((OPCODE_31 << 26) | (i_Rt << 21) | (MFMSR_CONST)); + uint32_t mfmsrInstOpcode = ((OPCODE_31 << 26) | (i_Rt << 21) | ((MFMSR_CONST)<< 1)); return SWIZZLE_4_BYTE(mfmsrInstOpcode); } @@ -361,8 +361,13 @@ STATIC uint32_t getRldicrInstruction( const uint16_t i_Ra, const uint16_t i_Rs, STATIC uint32_t getMfsprInstruction( const uint16_t i_Rt, const uint16_t i_sprNum ) { - uint32_t mfsprInstOpcode = 0; - mfsprInstOpcode = (( OPCODE_31 << 26 ) | ( i_Rt << 21 ) | ( i_sprNum << 11 ) | ( MFSPR_CONST << 1 )); + uint32_t mfsprInstOpcode = 0; + uint32_t temp = (( i_sprNum & 0x03FF ) << 11); + mfsprInstOpcode = (uint8_t)i_Rt << 21; + mfsprInstOpcode |= (( temp & 0x0000F800 ) << 5); + mfsprInstOpcode |= (( temp & 0x001F0000 ) >> 5); + mfsprInstOpcode |= MFSPR_BASE_OPCODE; + return SWIZZLE_4_BYTE(mfsprInstOpcode); } @@ -615,14 +620,14 @@ STATIC StopReturnCode_t getSprRegIndexAdjustment( const uint32_t i_saveMaskPos, do { - if( (( i_saveMaskPos >= SPR_BIT_POS_8 ) && ( i_saveMaskPos <= SPR_BIT_POS_19 )) || + if( (( i_saveMaskPos >= SPR_BIT_POS_8 ) && ( i_saveMaskPos <= SPR_BIT_POS_20 )) || (( i_saveMaskPos >= SPR_BIT_POS_25 ) && ( i_saveMaskPos <= SPR_BIT_POS_27 )) ) { l_rc = STOP_SAVE_SPR_BIT_POS_RESERVE; break; } - if( (i_saveMaskPos > SPR_BIT_POS_19) && (i_saveMaskPos < SPR_BIT_POS_25 ) ) + if( (i_saveMaskPos > SPR_BIT_POS_20) && (i_saveMaskPos < SPR_BIT_POS_25) ) { *i_sprAdjIndex = 12; } @@ -646,138 +651,9 @@ StopReturnCode_t p9_stop_save_cpureg( void* const i_pImage, const uint64_t i_regData, const uint64_t i_pir ) { - StopReturnCode_t l_rc = STOP_SAVE_SUCCESS; // procedure return code - HomerSection_t* chipHomer = NULL; - SmfHomerSection_t* smfChipHomer = NULL; - - do - { - uint32_t threadId = 0; - uint32_t coreId = 0; - uint32_t lookUpKey = 0; - void* pSprEntryLocation = NULL; // an offset w.r.t. to start of image - void* pThreadLocation = NULL; - bool threadScopeReg = false; - uint8_t l_urmorFix = false; - uint64_t l_sprValue = 0; - uint8_t l_selfRestVer = 0; - - MY_INF(">> p9_stop_save_cpureg" ); - - l_rc = getCoreAndThread( i_pImage, i_pir, &coreId, &threadId ); - - if( l_rc ) - { - MY_ERR("Failed to determine Core Id and Thread Id from PIR 0x%016llx", - i_pir); - break; - } - - MY_INF( " PIR 0x%016llx coreId %d threadid %d " - " registerId %d", i_pir, coreId, - threadId, i_regId ); - - // First of all let us validate all input arguments. - l_rc = validateSprImageInputs( i_pImage, - i_regId, - coreId, - &threadId, - &threadScopeReg ); - - if( l_rc ) - { - // Error: bad argument traces out error code - MY_ERR("Bad input argument rc %d", l_rc ); - - break; - } - - l_urmorFix = *(uint8_t*)((uint8_t*)i_pImage + CPMR_HOMER_OFFSET + CPMR_URMOR_FIX_BYTE); - l_selfRestVer = *(uint8_t *)((uint8_t *)i_pImage + CPMR_HOMER_OFFSET + CPMR_SELF_RESTORE_VER_BYTE ); - - if( l_selfRestVer ) - { - smfChipHomer = ( SmfHomerSection_t*)i_pImage; - - if( threadScopeReg ) - { - pThreadLocation = - &(smfChipHomer->iv_coreThreadRestore[coreId].iv_threadRestoreArea[threadId][0]); - } - else - { - pThreadLocation = - &(smfChipHomer->iv_coreThreadRestore[coreId].iv_coreRestoreArea[0]); - } - } - else //Old fips or OPAL release that doesn't support SMF - { - chipHomer = (HomerSection_t*)i_pImage; - - if( threadScopeReg ) - { - pThreadLocation = - &(chipHomer->iv_coreThreadRestore[coreId][threadId].iv_threadArea[0]); - } - else - { - pThreadLocation = - &(chipHomer->iv_coreThreadRestore[coreId][threadId].iv_coreArea[0]); - } - } - - if( ( SWIZZLE_4_BYTE(BLR_INST) == *(uint32_t*)pThreadLocation ) || - ( SWIZZLE_4_BYTE(ATTN_OPCODE) == *(uint32_t*) pThreadLocation ) ) - { - // table for given core id doesn't exit. It needs to be - // defined. - pSprEntryLocation = pThreadLocation; - } - else - { - // an SPR restore section for given core already exists - lookUpKey = genKeyForSprLookup( i_regId ); - l_rc = lookUpSprInImage( (uint32_t*)pThreadLocation, - lookUpKey, - threadScopeReg, - &pSprEntryLocation, - l_selfRestVer ); - } - - if( l_rc ) - { - MY_ERR("Invalid or corrupt SPR entry. CoreId 0x%08x threadId ", - "0x%08x regId 0x%08x lookUpKey 0x%08x pThreadLocation 0x%08x" - , coreId, threadId, i_regId, lookUpKey, pThreadLocation ); - break; - } - - if( ( P9_STOP_SPR_URMOR == i_regId ) && ( l_urmorFix ) ) - { - l_sprValue = i_regData - URMOR_CORRECTION; - } - else - { - l_sprValue = i_regData; - } - - l_rc = updateSprEntryInImage( (uint32_t*) pSprEntryLocation, - i_regId, - l_sprValue, - UPDATE_SPR_ENTRY ); - - if( l_rc ) - { - MY_ERR( " Failed to update the SPR entry of PIR 0x%08x reg" - "0x%08x", i_pir, i_regId ); - break; - } - - } - while(0); + MY_INF(">> p9_stop_save_cpureg" ); - MY_INF("<< p9_stop_save_cpureg" ); - return l_rc; + return proc_stop_save_cpureg( i_pImage, i_regId, i_regData, i_pir ); } //----------------------------------------------------------------------------- @@ -1003,103 +879,334 @@ StopReturnCode_t p9_stop_save_scom( void* const i_pImage, const ScomOperation_t i_operation, const ScomSection_t i_section ) { - StopReturnCode_t l_rc = STOP_SAVE_SUCCESS; - uint32_t entryLimit = 0; - uint8_t chipletId = 0; - uint32_t nopInst = 0; - uint32_t index = 0; - uint32_t imageVer = 0; - uint32_t entrySwzHeader = 0; - uint32_t l_maxScomRestoreEntry = 0; - ScomEntry_t* pScomEntry = NULL; - ScomEntry_t* pEntryLocation = NULL; - ScomEntry_t* pNopLocation = NULL; - ScomEntry_t* pEditScomHeader = NULL; - StopCacheSection_t* pStopCacheScomStart = NULL; - ScomEntry_t* pTableEndLocationtable = NULL; - uint32_t swizzleAddr; - uint64_t swizzleData; - uint32_t swizzleAttn; - uint32_t swizzleBlr = SWIZZLE_4_BYTE(BLR_INST); - bool cacheEntry = true; - MY_INF(">> p9_stop_save_scom"); - //Reads SGPE image version info from QPMR Header in HOMER - //For backward compatibility, for base version of SGPE Hcode, - //STOP API retains default behavior but adds version specific - //details in each entry in later versions. - imageVer = *(uint32_t*)((uint8_t*)i_pImage + QPMR_HOMER_OFFSET + QPMR_BUILD_VER_BYTE); - imageVer = SWIZZLE_4_BYTE(imageVer); - + return proc_stop_save_scom( i_pImage, i_scomAddress, + i_scomData, i_operation, i_section ); +} - do - { - chipletId = i_scomAddress >> 24; - chipletId = chipletId & 0x3F; +//----------------------------------------------------------------------------- - l_rc = validateScomImageInputs( i_pImage, i_scomAddress, chipletId, i_operation, i_section ); +/** + * @brief searches a self save entry of an SPR in self-save segment. + * @param[in] i_sprBitPos bit position associated with SPR in save mask vector. + * @param[in] l_pSprSaveStart start location of SPR save segment + * @param[in] i_searchLength length of SPR save segment + * @param[in] i_pSaveSprLoc start location of save entry for a given SPR. + * @return STOP_SAVE_SUCCESS if look up succeeds, error code otherwise. + */ +STATIC StopReturnCode_t lookUpSelfSaveSpr( uint32_t i_sprBitPos, uint32_t* l_pSprSaveStart, + uint32_t i_searchLength, uint32_t** i_pSaveSprLoc ) +{ + int32_t l_saveWordLength = (int32_t)(i_searchLength >> 2); + uint32_t l_oriInst = getOriInstruction( 0, 0, i_sprBitPos ); + StopReturnCode_t l_rc = STOP_SAVE_FAIL; - if( l_rc ) + while( l_saveWordLength > 0 ) + { + if( l_oriInst == *l_pSprSaveStart ) { - MY_ERR( "invalid argument: aborting"); + *i_pSaveSprLoc = l_pSprSaveStart; + l_rc = STOP_SAVE_SUCCESS; break; } - if( chipletId >= CORE_CHIPLET_ID_MIN ) - { - // chiplet is core. So, let us find the start address of SCOM area - // pertaining to a core in STOP image. - l_maxScomRestoreEntry = - *(uint32_t*)((uint8_t*)i_pImage + CPMR_HOMER_OFFSET + CPMR_MAX_SCOM_REST_PER_CORE_BYTE); - pScomEntry = CORE_ID_SCOM_START(i_pImage, chipletId ) - cacheEntry = false; + l_pSprSaveStart++; + l_saveWordLength--; + } - if( !l_maxScomRestoreEntry ) - { - //Old HB and new STOP API case. Retain legacy Number - l_maxScomRestoreEntry = SWIZZLE_4_BYTE(LEGACY_CORE_SCOM_SUPPORTED); - } - } - else - { - l_maxScomRestoreEntry = - *(uint32_t*)((uint8_t*)i_pImage + QPMR_HOMER_OFFSET + QPMR_QUAD_MAX_SCOM_ENTRY_BYTE); + return l_rc; +} - if( !l_maxScomRestoreEntry ) - { - // Incase of a bad HOMER header initialization, fall back on legacy number. - l_maxScomRestoreEntry = SWIZZLE_4_BYTE(LEGACY_QUAD_SCOM_SUPPORTED); - } - // chiplet is a cache. let us find start address of cache section - // associated with given chiplet. A cache section associated with - // given chiplet is split in to L2, L3 and EQ area. - pStopCacheScomStart = CACHE_SECTN_START(i_pImage, - chipletId); - } +//----------------------------------------------------------------------------- - l_maxScomRestoreEntry = SWIZZLE_4_BYTE(l_maxScomRestoreEntry); +/** + * @brief searches a self save entry of an SPR in self-save segment. + * @param[in] i_pSaveReg start of editable location of a SPR save entry. + * @param[in] i_sprNum Id of the SPR for which entry needs to be edited. + * @return STOP_SAVE_SUCCESS if look up succeeds, error code otherwise. + */ +STATIC StopReturnCode_t updateSelfSaveEntry( uint32_t* i_pSaveReg, uint16_t i_sprNum ) +{ + StopReturnCode_t l_rc = STOP_SAVE_SUCCESS; - if(( !pStopCacheScomStart ) && ( !pScomEntry) ) + do + { + if( !i_pSaveReg ) { - //Error invalid pointer to SCOM entry in cache or core section - //of STOP image. - MY_ERR("invalid start location for chiplet %d", - chipletId ); + l_rc = STOP_SAVE_FAIL; + MY_ERR( "Failed to update self save area for SPR 0x%04x", i_sprNum ); break; } - switch( i_section ) + if( P9_STOP_SPR_MSR == i_sprNum ) { - case P9_STOP_SECTION_EQ_SCOM: - pScomEntry = pStopCacheScomStart->nonCacheArea; - entryLimit = MAX_EQ_SCOM_ENTRIES; - break; + *i_pSaveReg = getMfmsrInstruction( 1 ); + } + else + { + *i_pSaveReg = getMfsprInstruction( 1, i_sprNum ); + } - case P9_STOP_SECTION_L2: - pScomEntry = pStopCacheScomStart->l2CacheArea; - entryLimit = MAX_L2_SCOM_ENTRIES; - break; + i_pSaveReg++; + + *i_pSaveReg = getBranchLinkRegInstruction( ); + } + while(0); + + return l_rc; +} + +//----------------------------------------------------------------------------- + +StopReturnCode_t p9_stop_save_cpureg_control( void* i_pImage, + const uint64_t i_pir, + const uint32_t i_saveRegVector ) +{ + MY_INF( ">> p9_stop_save_cpureg_control" ); + + return proc_stop_save_cpureg_control( i_pImage, i_pir, i_saveRegVector ); +} + +//----------------------------------------------------------------------------------------------------- + +StopReturnCode_t p9_stop_init_cpureg( void* const i_pImage, const uint32_t i_corePos ) +{ + MY_INF( ">> p9_stop_init_cpureg" ); + + return proc_stop_init_cpureg( i_pImage, i_corePos ); +} + +//----------------------------------------------------------------------------------------------------- + +StopReturnCode_t p9_stop_init_self_save( void* const i_pImage, const uint32_t i_corePos ) +{ + MY_INF( ">> p9_stop_init_self_save" ); + + return proc_stop_init_self_save( i_pImage, i_corePos ); +} + +//----------------------------------------------------------------------------------------------------- + +StopReturnCode_t proc_stop_init_cpureg( void* const i_pImage, const uint32_t i_corePos ) +{ + + StopReturnCode_t l_rc = STOP_SAVE_SUCCESS; + uint32_t* l_pRestoreStart = NULL; + void* l_pTempLoc = NULL; + SmfHomerSection_t* l_pHomer = NULL; + uint32_t l_threadPos = 0; + uint32_t l_lookUpKey = 0; + uint32_t l_sprIndex = 0; + uint8_t l_selfRestVer = 0; + + MY_INF( ">> proc_stop_init_cpureg" ); + + do + { + if( !i_pImage ) + { + l_rc = STOP_SAVE_ARG_INVALID_IMG; + break; + } + + if( i_corePos > MAX_CORE_ID_SUPPORTED ) + { + l_rc = STOP_SAVE_ARG_INVALID_CORE; + break; + } + + l_pHomer = ( SmfHomerSection_t * ) i_pImage; + l_selfRestVer = *(uint8_t *)((uint8_t *)i_pImage + CPMR_HOMER_OFFSET + CPMR_SELF_RESTORE_VER_BYTE ); + + for( l_sprIndex = 0; l_sprIndex < MAX_SPR_SUPPORTED; l_sprIndex++ ) + { + //Check if a given SPR needs to be self-saved each time on STOP entry + + l_lookUpKey = genKeyForSprLookup( ( CpuReg_t )g_sprRegister[l_sprIndex].iv_sprId ); + + if( g_sprRegister[l_sprIndex].iv_isThreadScope ) + { + for( l_threadPos = 0; l_threadPos < MAX_THREADS_PER_CORE; l_threadPos++ ) + { + l_pRestoreStart = + (uint32_t*)&l_pHomer->iv_coreThreadRestore[i_corePos].iv_threadRestoreArea[l_threadPos][0]; + + l_rc = lookUpSprInImage( (uint32_t*)l_pRestoreStart, l_lookUpKey, + g_sprRegister[l_sprIndex].iv_isThreadScope, + &l_pTempLoc, + l_selfRestVer ); + + if( l_rc ) + { + MY_ERR( "Thread SPR lookup failed in p9_stop_init_cpureg SPR %d Core %d Thread %d Index %d", + g_sprRegister[l_sprIndex].iv_sprId, i_corePos, l_threadPos, l_sprIndex ); + break; + } + + l_rc = updateSprEntryInImage( (uint32_t*) l_pTempLoc, + ( CpuReg_t )g_sprRegister[l_sprIndex].iv_sprId, + 0x00, + INIT_SPR_REGION ); + + if( l_rc ) + { + MY_ERR( "Thread SPR region init failed. Core %d SPR Id %d", + i_corePos, g_sprRegister[l_sprIndex].iv_sprId ); + break; + } + + }//end for thread + + if( l_rc ) + { + break; + } + + }//end if SPR threadscope + else + { + l_pRestoreStart = (uint32_t*)&l_pHomer->iv_coreThreadRestore[i_corePos].iv_coreRestoreArea[0]; + + l_rc = lookUpSprInImage( (uint32_t*)l_pRestoreStart, l_lookUpKey, + g_sprRegister[l_sprIndex].iv_isThreadScope, + &l_pTempLoc, l_selfRestVer ); + + if( l_rc ) + { + MY_ERR( "Core SPR lookup failed in p9_stop_init_cpureg" ); + break; + } + + l_rc = updateSprEntryInImage( (uint32_t*) l_pTempLoc, + ( CpuReg_t )g_sprRegister[l_sprIndex].iv_sprId, + 0x00, + INIT_SPR_REGION ); + + if( l_rc ) + { + MY_ERR( "Core SPR region init failed. Core %d SPR Id %d SPR Index %d", + i_corePos, g_sprRegister[l_sprIndex].iv_sprId, l_sprIndex ); + break; + } + + }// end else + + }// end for l_sprIndex + + } + while(0); + + MY_INF( "<< proc_stop_init_cpureg" ); + + return l_rc; +} + +//----------------------------------------------------------------------------------------------------- + +StopReturnCode_t proc_stop_save_scom( void* const i_pImage, + const uint32_t i_scomAddress, + const uint64_t i_scomData, + const ScomOperation_t i_operation, + const ScomSection_t i_section ) +{ + StopReturnCode_t l_rc = STOP_SAVE_SUCCESS; + uint32_t entryLimit = 0; + uint8_t chipletId = 0; + uint32_t nopInst = 0; + uint32_t index = 0; + uint32_t imageVer = 0; + uint32_t entrySwzHeader = 0; + uint32_t l_maxScomRestoreEntry = 0; + ScomEntry_t* pScomEntry = NULL; + ScomEntry_t* pEntryLocation = NULL; + ScomEntry_t* pNopLocation = NULL; + ScomEntry_t* pEditScomHeader = NULL; + StopCacheSection_t* pStopCacheScomStart = NULL; + ScomEntry_t* pTableEndLocationtable = NULL; + uint32_t swizzleAddr; + uint64_t swizzleData; + uint32_t swizzleAttn; + uint32_t swizzleBlr = SWIZZLE_4_BYTE(BLR_INST); + bool cacheEntry = true; + + MY_INF( ">> proc_stop_save_scom" ); + + //Reads SGPE image version info from QPMR Header in HOMER + //For backward compatibility, for base version of SGPE Hcode, + //STOP API retains default behavior but adds version specific + //details in each entry in later versions. + imageVer = *(uint32_t*)((uint8_t*)i_pImage + QPMR_HOMER_OFFSET + QPMR_BUILD_VER_BYTE); + imageVer = SWIZZLE_4_BYTE(imageVer); + + + do + { + chipletId = i_scomAddress >> 24; + chipletId = chipletId & 0x3F; + + l_rc = validateScomImageInputs( i_pImage, i_scomAddress, chipletId, i_operation, i_section ); + + if( l_rc ) + { + MY_ERR( "invalid argument: aborting"); + break; + } + + if( chipletId >= CORE_CHIPLET_ID_MIN ) + { + // chiplet is core. So, let us find the start address of SCOM area + // pertaining to a core in STOP image. + l_maxScomRestoreEntry = + *(uint32_t*)((uint8_t*)i_pImage + CPMR_HOMER_OFFSET + CPMR_MAX_SCOM_REST_PER_CORE_BYTE); + pScomEntry = CORE_ID_SCOM_START(i_pImage, chipletId ) + cacheEntry = false; + + if( !l_maxScomRestoreEntry ) + { + //Old HB and new STOP API case. Retain legacy Number + l_maxScomRestoreEntry = SWIZZLE_4_BYTE(LEGACY_CORE_SCOM_SUPPORTED); + } + } + else + { + l_maxScomRestoreEntry = + *(uint32_t*)((uint8_t*)i_pImage + QPMR_HOMER_OFFSET + QPMR_QUAD_MAX_SCOM_ENTRY_BYTE); + + if( !l_maxScomRestoreEntry ) + { + // Incase of a bad HOMER header initialization, fall back on legacy number. + l_maxScomRestoreEntry = SWIZZLE_4_BYTE(LEGACY_QUAD_SCOM_SUPPORTED); + } + // chiplet is a cache. let us find start address of cache section + // associated with given chiplet. A cache section associated with + // given chiplet is split in to L2, L3 and EQ area. + pStopCacheScomStart = CACHE_SECTN_START(i_pImage, + chipletId); + } + + l_maxScomRestoreEntry = SWIZZLE_4_BYTE(l_maxScomRestoreEntry); + + if(( !pStopCacheScomStart ) && ( !pScomEntry) ) + { + //Error invalid pointer to SCOM entry in cache or core section + //of STOP image. + MY_ERR("invalid start location for chiplet %d", + chipletId ); + break; + } + + switch( i_section ) + { + case P9_STOP_SECTION_EQ_SCOM: + pScomEntry = pStopCacheScomStart->nonCacheArea; + entryLimit = MAX_EQ_SCOM_ENTRIES; + break; + + case P9_STOP_SECTION_L2: + pScomEntry = pStopCacheScomStart->l2CacheArea; + entryLimit = MAX_L2_SCOM_ENTRIES; + break; case P9_STOP_SECTION_L3: pScomEntry = pStopCacheScomStart->l3CacheArea; @@ -1274,131 +1381,60 @@ StopReturnCode_t p9_stop_save_scom( void* const i_pImage, if( NULL == pEntryLocation ) { editAppend = pTableEndLocationtable; - } - else - { - editAppend = pEntryLocation; - - if( P9_STOP_SCOM_OR_APPEND == i_operation ) - { - tempOperation = P9_STOP_SCOM_OR; - } - else - { - tempOperation = P9_STOP_SCOM_AND; - } - } - - l_rc = editScomEntry( swizzleAddr, - swizzleData, - editAppend, - tempOperation ); - - pEditScomHeader = editAppend; - } - break; - - default: - l_rc = STOP_SAVE_SCOM_INVALID_OPERATION; - break; - } - } - while(0); - - if( l_rc ) - { - MY_ERR("SCOM image operation 0x%08x failed for chiplet 0x%08x addr" - "0x%08x", i_operation, chipletId , - i_scomAddress ); - } - else - { - //Update SCOM Restore entry with version and memory layout - //info - updateEntryHeader( pEditScomHeader, imageVer, l_maxScomRestoreEntry ); - } - - MY_INF("<< p9_stop_save_scom"); - return l_rc; -} - -//----------------------------------------------------------------------------- - -/** - * @brief searches a self save entry of an SPR in self-save segment. - * @param[in] i_sprBitPos bit position associated with SPR in save mask vector. - * @param[in] l_pSprSaveStart start location of SPR save segment - * @param[in] i_searchLength length of SPR save segment - * @param[in] i_pSaveSprLoc start location of save entry for a given SPR. - * @return STOP_SAVE_SUCCESS if look up succeeds, error code otherwise. - */ -STATIC StopReturnCode_t lookUpSelfSaveSpr( uint32_t i_sprBitPos, uint32_t* l_pSprSaveStart, - uint32_t i_searchLength, uint32_t** i_pSaveSprLoc ) -{ - int32_t l_saveWordLength = (int32_t)(i_searchLength >> 2); - uint32_t l_oriInst = getOriInstruction( 0, 0, i_sprBitPos ); - StopReturnCode_t l_rc = STOP_SAVE_FAIL; - - while( l_saveWordLength > 0 ) - { - if( l_oriInst == *l_pSprSaveStart ) - { - *i_pSaveSprLoc = l_pSprSaveStart; - l_rc = STOP_SAVE_SUCCESS; - break; - } - - l_pSprSaveStart++; - l_saveWordLength--; - } - - return l_rc; -} - -//----------------------------------------------------------------------------- - -/** - * @brief searches a self save entry of an SPR in self-save segment. - * @param[in] i_pSaveReg start of editable location of a SPR save entry. - * @param[in] i_sprNum Id of the SPR for which entry needs to be edited. - * @return STOP_SAVE_SUCCESS if look up succeeds, error code otherwise. - */ -STATIC StopReturnCode_t updateSelfSaveEntry( uint32_t* i_pSaveReg, uint16_t i_sprNum ) -{ - StopReturnCode_t l_rc = STOP_SAVE_SUCCESS; - - do - { - if( !i_pSaveReg ) - { - l_rc = STOP_SAVE_FAIL; - MY_ERR( "Failed to update self save area for SPR 0x%04x", i_sprNum ); - break; - } + } + else + { + editAppend = pEntryLocation; - if( P9_STOP_SPR_MSR == i_sprNum ) - { - *i_pSaveReg = getMfmsrInstruction( 1 ); - } - else - { - *i_pSaveReg = getMfsprInstruction( 1, i_sprNum ); - } + if( P9_STOP_SCOM_OR_APPEND == i_operation ) + { + tempOperation = P9_STOP_SCOM_OR; + } + else + { + tempOperation = P9_STOP_SCOM_AND; + } + } - i_pSaveReg++; + l_rc = editScomEntry( swizzleAddr, + swizzleData, + editAppend, + tempOperation ); - *i_pSaveReg = getBranchLinkRegInstruction( ); + pEditScomHeader = editAppend; + } + break; + + default: + l_rc = STOP_SAVE_SCOM_INVALID_OPERATION; + break; + } } while(0); + if( l_rc ) + { + MY_ERR("SCOM image operation 0x%08x failed for chiplet 0x%08x addr" + "0x%08x", i_operation, chipletId , + i_scomAddress ); + } + else + { + //Update SCOM Restore entry with version and memory layout + //info + updateEntryHeader( pEditScomHeader, imageVer, l_maxScomRestoreEntry ); + } + + MY_INF( "<< proc_stop_save_scom" ); + return l_rc; } -//----------------------------------------------------------------------------- +//----------------------------------------------------------------------------------------------------- -StopReturnCode_t p9_stop_save_cpureg_control( void* i_pImage, - const uint64_t i_pir, - const uint32_t i_saveRegVector ) +StopReturnCode_t proc_stop_save_cpureg_control( void* i_pImage, + const uint64_t i_pir, + const uint32_t i_saveRegVector ) { StopReturnCode_t l_rc = STOP_SAVE_SUCCESS; uint32_t l_coreId = 0; @@ -1411,8 +1447,10 @@ StopReturnCode_t p9_stop_save_cpureg_control( void* i_pImage, uint32_t* l_pRestoreStart = NULL; uint32_t* l_pSprSave = NULL; void* l_pTempLoc = NULL; + uint32_t * l_pTempWord = NULL; SmfHomerSection_t* l_pHomer = NULL; uint8_t l_selfRestVer = 0; + MY_INF(">> proc_stop_save_cpureg_control" ); do { @@ -1440,6 +1478,11 @@ StopReturnCode_t p9_stop_save_cpureg_control( void* i_pImage, { l_sprPos = g_sprRegister[l_sprIndex].iv_saveMaskPos; + if( l_sprPos > MAX_SPR_BIT_POS ) + { + continue; + } + //Check if a given SPR needs to be self-saved each time on STOP entry if( i_saveRegVector & ( TEST_BIT_PATTERN >> l_sprPos ) ) @@ -1493,139 +1536,187 @@ StopReturnCode_t p9_stop_save_cpureg_control( void* i_pImage, //update specific instructions of self save region to enable saving for SPR l_rc = updateSelfSaveEntry( l_pSprSave, g_sprRegister[l_sprIndex].iv_sprId ); + if( l_rc ) + { + MY_ERR( "Failed to update self save instructions for 0x%08x", + (uint32_t) g_sprRegister[l_sprIndex].iv_sprId ); + } + + if( l_pTempLoc ) + { + l_pTempWord = (uint32_t *)l_pTempLoc; + l_pTempWord++; + *l_pTempWord = getXorInstruction( 0, 0, 0 ); + } + }// end if( i_saveRegVector..) }// end for } while(0); + MY_INF("<< proc_stop_save_cpureg_control" ); + return l_rc; + } //----------------------------------------------------------------------------------------------------- -StopReturnCode_t p9_stop_init_cpureg( void* const i_pImage, const uint32_t i_corePos ) +StopReturnCode_t proc_stop_save_cpureg( void* const i_pImage, + const CpuReg_t i_regId, + const uint64_t i_regData, + const uint64_t i_pir ) { - StopReturnCode_t l_rc = STOP_SAVE_SUCCESS; - uint32_t* l_pRestoreStart = NULL; - void* l_pTempLoc = NULL; - SmfHomerSection_t* l_pHomer = NULL; - uint32_t l_threadPos = 0; - uint32_t l_lookUpKey = 0; - uint32_t l_sprIndex = 0; - uint8_t l_selfRestVer = 0; - MY_INF( ">> p9_stop_init_cpureg" ); + StopReturnCode_t l_rc = STOP_SAVE_SUCCESS; // procedure return code + HomerSection_t* chipHomer = NULL; + SmfHomerSection_t* smfChipHomer = NULL; + + MY_INF(">> proc_stop_save_cpureg" ); do { - if( !i_pImage ) + uint32_t threadId = 0; + uint32_t coreId = 0; + uint32_t lookUpKey = 0; + void* pSprEntryLocation = NULL; // an offset w.r.t. to start of image + void* pThreadLocation = NULL; + bool threadScopeReg = false; + uint8_t l_urmorFix = false; + uint64_t l_sprValue = 0; + uint8_t l_selfRestVer = 0; + + + l_rc = getCoreAndThread( i_pImage, i_pir, &coreId, &threadId ); + + if( l_rc ) { - l_rc = STOP_SAVE_ARG_INVALID_IMG; + MY_ERR("Failed to determine Core Id and Thread Id from PIR 0x%016llx", + i_pir); break; } - if( i_corePos > MAX_CORE_ID_SUPPORTED ) + MY_INF( " PIR 0x%016llx coreId %d threadid %d " + " registerId %d", i_pir, coreId, + threadId, i_regId ); + + // First of all let us validate all input arguments. + l_rc = validateSprImageInputs( i_pImage, + i_regId, + coreId, + &threadId, + &threadScopeReg ); + + if( l_rc ) { - l_rc = STOP_SAVE_ARG_INVALID_CORE; + // Error: bad argument traces out error code + MY_ERR("Bad input argument rc %d", l_rc ); + break; } - l_pHomer = ( SmfHomerSection_t * ) i_pImage; + l_urmorFix = *(uint8_t*)((uint8_t*)i_pImage + CPMR_HOMER_OFFSET + CPMR_URMOR_FIX_BYTE); l_selfRestVer = *(uint8_t *)((uint8_t *)i_pImage + CPMR_HOMER_OFFSET + CPMR_SELF_RESTORE_VER_BYTE ); - for( l_sprIndex = 0; l_sprIndex < MAX_SPR_SUPPORTED; l_sprIndex++ ) + if( l_selfRestVer ) { - //Check if a given SPR needs to be self-saved each time on STOP entry - - l_lookUpKey = genKeyForSprLookup( ( CpuReg_t )g_sprRegister[l_sprIndex].iv_sprId ); + smfChipHomer = ( SmfHomerSection_t*)i_pImage; - if( g_sprRegister[l_sprIndex].iv_isThreadScope ) + if( threadScopeReg ) { - for( l_threadPos = 0; l_threadPos < MAX_THREADS_PER_CORE; l_threadPos++ ) - { - l_pRestoreStart = - (uint32_t*)&l_pHomer->iv_coreThreadRestore[i_corePos].iv_threadRestoreArea[l_threadPos][0]; - - l_rc = lookUpSprInImage( (uint32_t*)l_pRestoreStart, l_lookUpKey, - g_sprRegister[l_sprIndex].iv_isThreadScope, - &l_pTempLoc, - l_selfRestVer ); - - if( l_rc ) - { - MY_ERR( "Thread SPR lookup failed in p9_stop_init_cpureg SPR %d Core %d Thread %d Index %d", - g_sprRegister[l_sprIndex].iv_sprId, i_corePos, l_threadPos, l_sprIndex ); - break; - } - - l_rc = updateSprEntryInImage( (uint32_t*) l_pTempLoc, - ( CpuReg_t )g_sprRegister[l_sprIndex].iv_sprId, - 0x00, - INIT_SPR_REGION ); - - if( l_rc ) - { - MY_ERR( "Thread SPR region init failed. Core %d SPR Id %d", - i_corePos, g_sprRegister[l_sprIndex].iv_sprId ); - break; - } - - }//end for thread - - if( l_rc ) - { - break; - } - - }//end if SPR threadscope + pThreadLocation = + &(smfChipHomer->iv_coreThreadRestore[coreId].iv_threadRestoreArea[threadId][0]); + } else { - l_pRestoreStart = (uint32_t*)&l_pHomer->iv_coreThreadRestore[i_corePos].iv_coreRestoreArea[0]; + pThreadLocation = + &(smfChipHomer->iv_coreThreadRestore[coreId].iv_coreRestoreArea[0]); + } + } + else //Old fips or OPAL release that doesn't support SMF + { + chipHomer = (HomerSection_t*)i_pImage; - l_rc = lookUpSprInImage( (uint32_t*)l_pRestoreStart, l_lookUpKey, - g_sprRegister[l_sprIndex].iv_isThreadScope, - &l_pTempLoc, l_selfRestVer ); + if( threadScopeReg ) + { + pThreadLocation = + &(chipHomer->iv_coreThreadRestore[coreId][threadId].iv_threadArea[0]); + } + else + { + pThreadLocation = + &(chipHomer->iv_coreThreadRestore[coreId][threadId].iv_coreArea[0]); + } + } - if( l_rc ) - { - MY_ERR( "Core SPR lookup failed in p9_stop_init_cpureg" ); - break; - } + if( ( SWIZZLE_4_BYTE(BLR_INST) == *(uint32_t*)pThreadLocation ) || + ( SWIZZLE_4_BYTE(ATTN_OPCODE) == *(uint32_t*) pThreadLocation ) ) + { + // table for given core id doesn't exit. It needs to be + // defined. + pSprEntryLocation = pThreadLocation; + } + else + { + // an SPR restore section for given core already exists + lookUpKey = genKeyForSprLookup( i_regId ); + l_rc = lookUpSprInImage( (uint32_t*)pThreadLocation, + lookUpKey, + threadScopeReg, + &pSprEntryLocation, + l_selfRestVer ); + } - l_rc = updateSprEntryInImage( (uint32_t*) l_pTempLoc, - ( CpuReg_t )g_sprRegister[l_sprIndex].iv_sprId, - 0x00, - INIT_SPR_REGION ); + if( l_rc ) + { + MY_ERR("Invalid or corrupt SPR entry. CoreId 0x%08x threadId ", + "0x%08x regId 0x%08x lookUpKey 0x%08x pThreadLocation 0x%08x" + , coreId, threadId, i_regId, lookUpKey, pThreadLocation ); + break; + } - if( l_rc ) - { - MY_ERR( "Core SPR region init failed. Core %d SPR Id %d SPR Index %d", - i_corePos, g_sprRegister[l_sprIndex].iv_sprId, l_sprIndex ); - break; - } + if( ( P9_STOP_SPR_URMOR == i_regId ) && ( l_urmorFix ) ) + { + l_sprValue = i_regData - URMOR_CORRECTION; + } + else + { + l_sprValue = i_regData; + } - }// end else + l_rc = updateSprEntryInImage( (uint32_t*) pSprEntryLocation, + i_regId, + l_sprValue, + UPDATE_SPR_ENTRY ); - }// end for l_sprIndex + if( l_rc ) + { + MY_ERR( " Failed to update the SPR entry of PIR 0x%08x reg" + "0x%08x", i_pir, i_regId ); + break; + } } while(0); - MY_INF( "<< p9_stop_init_cpureg" ); + MY_INF("<< proc_stop_save_cpureg" ); + return l_rc; } //----------------------------------------------------------------------------------------------------- -StopReturnCode_t p9_stop_init_self_save( void* const i_pImage, const uint32_t i_corePos ) +StopReturnCode_t proc_stop_init_self_save( void* const i_pImage, const uint32_t i_corePos ) { + StopReturnCode_t l_rc = STOP_SAVE_SUCCESS; uint32_t* l_pSaveStart = NULL; SmfHomerSection_t * l_pHomer = NULL; uint32_t l_threadPos = 0; uint32_t l_sprBitPos = 0; uint32_t l_sprIndexAdj = 0; - MY_INF( ">> p9_stop_init_self_save" ); + + MY_INF(">> proc_stop_init_self_save" ); do { @@ -1732,7 +1823,8 @@ StopReturnCode_t p9_stop_init_self_save( void* const i_pImage, const uint32_t i } while(0); - MY_INF( "<< p9_stop_init_self_save" ); + MY_INF("<< proc_stop_init_self_save" ); + return l_rc; } diff --git a/libpore/p9_stop_api.H b/libpore/p9_stop_api.H index 17caedb3..3f6420ff 100644 --- a/libpore/p9_stop_api.H +++ b/libpore/p9_stop_api.H @@ -70,6 +70,26 @@ typedef enum P9_STOP_SPR_PMCR = 884, // core register P9_STOP_SPR_HID = 1008, // core register P9_STOP_SPR_MSR = 2000, // thread register + + //enum members which are project agnostic + PROC_STOP_SPR_DAWR = 180, // thread register + PROC_STOP_SPR_CIABR = 187, // thread register + PROC_STOP_SPR_DAWRX = 188, // thread register + PROC_STOP_SPR_HSPRG0 = 304, // thread register + PROC_STOP_SPR_HRMOR = 313, // core register + PROC_STOP_SPR_LPCR = 318, // thread register + PROC_STOP_SPR_HMEER = 337, // core register + PROC_STOP_SPR_PTCR = 464, // core register + PROC_STOP_SPR_USPRG0 = 496, // thread register + PROC_STOP_SPR_USPRG1 = 497, // thread register + PROC_STOP_SPR_URMOR = 505, // core register + PROC_STOP_SPR_SMFCTRL = 511, // thread register + PROC_STOP_SPR_LDBAR = 850, // thread register + PROC_STOP_SPR_PSSCR = 855, // thread register + PROC_STOP_SPR_PMCR = 884, // core register + PROC_STOP_SPR_HID = 1008, // core register + PROC_STOP_SPR_MSR = 2000, // thread register + } CpuReg_t; /** @@ -110,7 +130,20 @@ typedef enum P9_STOP_SCOM_RESET = 6, P9_STOP_SCOM_OR_APPEND = 7, P9_STOP_SCOM_AND_APPEND = 8, - P9_STOP_SCOM_OP_MAX = 9 + P9_STOP_SCOM_OP_MAX = 9, + + //enum members which are project agnostic + PROC_STOP_SCOM_OP_MIN = 0, + PROC_STOP_SCOM_APPEND = 1, + PROC_STOP_SCOM_REPLACE = 2, + PROC_STOP_SCOM_OR = 3, + PROC_STOP_SCOM_AND = 4, + PROC_STOP_SCOM_NOOP = 5, + PROC_STOP_SCOM_RESET = 6, + PROC_STOP_SCOM_OR_APPEND = 7, + PROC_STOP_SCOM_AND_APPEND = 8, + PROC_STOP_SCOM_OP_MAX = 9, + } ScomOperation_t; /** @@ -123,7 +156,15 @@ typedef enum P9_STOP_SECTION_EQ_SCOM = 2, P9_STOP_SECTION_L2 = 3, P9_STOP_SECTION_L3 = 4, - P9_STOP_SECTION_MAX = 5 + P9_STOP_SECTION_MAX = 5, + + //enum members which are project agnostic + PROC_STOP_SECTION_MIN = 0, + PROC_STOP_SECTION_CORE_SCOM = 1, + PROC_STOP_SECTION_EQ_SCOM = 2, + PROC_STOP_SECTION_L2 = 3, + PROC_STOP_SECTION_L3 = 4, + PROC_STOP_SECTION_MAX = 5, } ScomSection_t; /** @@ -148,7 +189,6 @@ typedef enum BIT_POS_LPCR = 5, BIT_POS_PSSCR = 6, BIT_POS_MSR = 7, - BIT_POS_HRMOR = 20, BIT_POS_HID = 21, BIT_POS_HMEER = 22, BIT_POS_PMCR = 23, @@ -156,7 +196,6 @@ typedef enum BIT_POS_SMFCTRL = 28, BIT_POS_USPRG0 = 29, BIT_POS_USPRG1 = 30, - BIT_POS_URMOR = 31, } SprBitPositionList_t; @@ -229,13 +268,79 @@ p9_stop_save_cpureg_control( void* i_pImage, const uint64_t i_pir, * @brief initializes self-save region with specific instruction. * @param[in] i_pImage start address of homer image of P9 chip. * @param[in] i_corePos physical core's relative position within processor chip. - * @return STOP_SAVE_SUCCESS SUCCESS if self-save is initialized successfully, + * @return STOP_SAVE_SUCCESS if self-save is initialized successfully, * error code otherwise. * @note API is intended only for use case of HOMER build. There is no explicit * effort to support any other use case. */ StopReturnCode_t p9_stop_init_self_save( void* const i_pImage, const uint32_t i_corePos ); +/** + * @brief creates SCOM restore entry for a given scom adress in HOMER. + * @param i_pImage points to start address of HOMER image. + * @param i_scomAddress address associated with SCOM restore entry. + * @param i_scomData data associated with SCOM restore entry. + * @param i_operation operation type requested for API. + * @param i_section section of HOMER in which restore entry needs to be created. + * @return STOP_SAVE_SUCCESS if API succeeds, error code otherwise. + * @note It is an API for creating SCOM restore entry in HOMER. It is agnostic to + * generation of POWER processor. + */ + +StopReturnCode_t proc_stop_save_scom( void* const i_pImage, + const uint32_t i_scomAddress, + const uint64_t i_scomData, + const ScomOperation_t i_operation, + const ScomSection_t i_section ); + +/** + * @brief initializes self save restore region of HOMER. + * @param[in] i_pImage points to base of HOMER image. + * @param[in] i_corePos position of the physical core. + * @return STOP_SAVE_SUCCESS if API succeeds, error code otherwise. + * @note It is an API for initializing self restore region in HOMER. It is agnostic to + * generation of POWER processor. + */ +StopReturnCode_t proc_stop_init_cpureg( void* const i_pImage, const uint32_t i_corePos ); + +/** + * @brief enables self save for a given set of SPRs + * @param[in] i_pImage points to start address of HOMER image. + * @param[in] i_pir PIR value associated with core and thread. + * @param[in] i_saveRegVector bit vector representing the SPRs that needs to be self saved. + * @return STOP_SAVE_SUCCESS if API succeeds, error code otherwise. + * @note It is an API for enabling self save of SPRs and it is agnostic to + * generation of POWER processor. + */ +StopReturnCode_t proc_stop_save_cpureg_control( void* i_pImage, + const uint64_t i_pir, + const uint32_t i_saveRegVector ); + +/** + * @brief creates an SPR restore entry in HOMER + * @param[in] i_pImage points to start address of HOMER image. + * @param[in] i_pir PIR value associated with core and thread. + * @param[in] i_saveRegVector bit vector representing the SPRs that needs to be self saved. + * @return STOP_SAVE_SUCCESS if API succeeds, error code otherwise. + * @note It is an API for enabling self save of SPRs and it is agnostic to + * generation of POWER processor. + */ +StopReturnCode_t proc_stop_save_cpureg( void* const i_pImage, + const CpuReg_t i_regId, + const uint64_t i_regData, + const uint64_t i_pir ); + +/** + * @brief initializes self-save region with specific instruction. + * @param[in] i_pImage start address of homer image. + * @param[in] i_corePos physical core's relative position within processor chip. + * @return STOP_SAVE_SUCCESS if self-save is initialized successfully, + * error code otherwise. + * @note API is project agnostic and is intended only for use case of HOMER build. + * There is no explicit effort to support any other use case. + */ +StopReturnCode_t proc_stop_init_self_save( void* const i_pImage, const uint32_t i_corePos ); + #ifdef __cplusplus } // extern "C" }; // namespace stopImageSection ends diff --git a/libpore/p9_stop_data_struct.H b/libpore/p9_stop_data_struct.H index 1e9721e0..4e73aab5 100644 --- a/libpore/p9_stop_data_struct.H +++ b/libpore/p9_stop_data_struct.H @@ -67,9 +67,9 @@ enum SIZE_PER_SPR_RESTORE_INST = ((4 * sizeof(uint8_t)) / sizeof(uint32_t)), MAX_THREAD_LEVEL_SPRS = 11, MAX_CORE_LEVEL_SPRS = 6, - MAX_SPR_BIT_POS = 31, + MAX_SPR_BIT_POS = 30, SPR_BIT_POS_8 = 8, - SPR_BIT_POS_19 = 19, + SPR_BIT_POS_20 = 20, SPR_BIT_POS_25 = 25, SPR_BIT_POS_27 = 27, }; diff --git a/libpore/p9_stop_util.H b/libpore/p9_stop_util.H index 3266fdef..79b4e959 100644 --- a/libpore/p9_stop_util.H +++ b/libpore/p9_stop_util.H @@ -5,7 +5,7 @@ /* */ /* OpenPOWER HostBoot Project */ /* */ -/* Contributors Listed Below - COPYRIGHT 2016,2017 */ +/* Contributors Listed Below - COPYRIGHT 2016,2018 */ /* [+] International Business Machines Corp. */ /* */ /* */ @@ -95,7 +95,10 @@ typedef struct uint64_t cpmrMagicWord; uint32_t buildDate; uint32_t version; - uint8_t reserve1[7]; + uint8_t reserve1[4]; + uint8_t selfRestoreVer; + uint8_t stopApiVer; + uint8_t urmorFix; uint8_t fusedModeStatus; uint32_t cmeImgOffset; uint32_t cmeImgLength;