diff mbox series

[committed] amdgcn: Use correct offset mode for gather/scatter

Message ID d52c6739-3594-dba7-25c6-ed9675e40c58@codesourcery.com
State New
Headers show
Series [committed] amdgcn: Use correct offset mode for gather/scatter | expand

Commit Message

Andrew Stubbs Feb. 21, 2020, 2:17 p.m. UTC 
When I forward ported the scatter/gather patterns from my GCC 9 
implementation I didn't notice that GCC 10 has a different naming 
scheme. :-(

The patterns were being used because all GCN vector loads end up being 
scatter/gather, but not by the actual vectorizer. The test fails were 
there to see, but there are still a lot of those to work through.

This patch uses the new two-mode naming scheme and implements the 
offsets correctly. This is actually a step forward for GCN because the 
offsets are always SImode, regardless of the primary mode.

Andrew
diff mbox series

Patch

amdgcn: Use correct offset mode for gather/scatter

The scatter/gather pattern names changed for GCC 10, but I hadn't noticed.
This switches the patterns to the new offset mode scheme.

2020-02-21  Andrew Stubbs  <ams@codesourcery.com>

	gcc/
	* config/gcn/gcn-valu.md (gather_load<mode>): Rename to ...
	(gather_load<mode>v64si): ... this and set operand 2 to V64SI.
	(scatter_store<mode>): Rename to ...
	(scatter_store<mode>v64si): ... this and set operand 1 to V64SI.
	(scatter<mode>_exec): Delete. Move contents ...
	(mask_scatter_store<mode>): ... here, and rename that to ...
	(mask_gather_load<mode>v64si): ... this. Set operand 2 to V64SI.
	Remove mode conversion.
	(mask_gather_load<mode>): Rename to ...
	(mask_scatter_store<mode>v64si): ... this. Set operand 1 to V64SI.
	Remove mode conversion.
	* config/gcn/gcn.c (gcn_expand_scaled_offsets): Remove mode conversion.

diff --git a/gcc/config/gcn/gcn-valu.md b/gcc/config/gcn/gcn-valu.md
index d5e6d0a625a..a0cc9a2d8fc 100644
--- a/gcc/config/gcn/gcn-valu.md
+++ b/gcc/config/gcn/gcn-valu.md
@@ -679,10 +679,10 @@ 
 ;;   fields normally found in a MEM.
 ;; - Multiple forms of address expression are supported, below.
 
-(define_expand "gather_load<mode>"
+(define_expand "gather_load<mode>v64si"
   [(match_operand:VEC_ALLREG_MODE 0 "register_operand")
    (match_operand:DI 1 "register_operand")
-   (match_operand 2 "register_operand")
+   (match_operand:V64SI 2 "register_operand")
    (match_operand 3 "immediate_operand")
    (match_operand:SI 4 "gcn_alu_operand")]
   ""
@@ -811,9 +811,9 @@ 
   [(set_attr "type" "flat")
    (set_attr "length" "12")])
 
-(define_expand "scatter_store<mode>"
+(define_expand "scatter_store<mode>v64si"
   [(match_operand:DI 0 "register_operand")
-   (match_operand 1 "register_operand")
+   (match_operand:V64SI 1 "register_operand")
    (match_operand 2 "immediate_operand")
    (match_operand:SI 3 "gcn_alu_operand")
    (match_operand:VEC_ALLREG_MODE 4 "register_operand")]
@@ -833,34 +833,6 @@ 
     DONE;
   })
 
-(define_expand "scatter<mode>_exec"
-  [(match_operand:DI 0 "register_operand")
-   (match_operand 1 "register_operand")
-   (match_operand 2 "immediate_operand")
-   (match_operand:SI 3 "gcn_alu_operand")
-   (match_operand:VEC_ALLREG_MODE 4 "register_operand")
-   (match_operand:DI 5 "gcn_exec_reg_operand")]
-  ""
-  {
-    operands[5] = force_reg (DImode, operands[5]);
-
-    rtx addr = gcn_expand_scaled_offsets (DEFAULT_ADDR_SPACE, operands[0],
-					  operands[1], operands[3],
-					  INTVAL (operands[2]), operands[5]);
-
-    if (GET_MODE (addr) == V64DImode)
-      emit_insn (gen_scatter<mode>_insn_1offset_exec (addr, const0_rtx,
-						      operands[4], const0_rtx,
-						      const0_rtx,
-						      operands[5]));
-    else
-      emit_insn (gen_scatter<mode>_insn_2offsets_exec (operands[0], addr,
-						       const0_rtx, operands[4],
-						       const0_rtx, const0_rtx,
-						       operands[5]));
-    DONE;
-  })
-
 ; Allow any address expression
 (define_expand "scatter<mode>_expr<exec_scatter>"
   [(set (mem:BLK (scratch))
@@ -2795,10 +2767,10 @@ 
     DONE;
   })
 
-(define_expand "mask_gather_load<mode>"
+(define_expand "mask_gather_load<mode>v64si"
   [(match_operand:VEC_ALLREG_MODE 0 "register_operand")
    (match_operand:DI 1 "register_operand")
-   (match_operand 2 "register_operand")
+   (match_operand:V64SI 2 "register_operand")
    (match_operand 3 "immediate_operand")
    (match_operand:SI 4 "gcn_alu_operand")
    (match_operand:DI 5 "")]
@@ -2806,16 +2778,6 @@ 
   {
     rtx exec = force_reg (DImode, operands[5]);
 
-    /* TODO: more conversions will be needed when more types are vectorized. */
-    if (GET_MODE (operands[2]) == V64DImode)
-      {
-	rtx tmp = gen_reg_rtx (V64SImode);
-	emit_insn (gen_truncv64div64si2_exec (tmp, operands[2],
-					      gcn_gen_undef (V64SImode),
-					      exec));
-	operands[2] = tmp;
-      }
-
     rtx addr = gcn_expand_scaled_offsets (DEFAULT_ADDR_SPACE, operands[1],
 					  operands[2], operands[4],
 					  INTVAL (operands[3]), exec);
@@ -2836,9 +2798,9 @@ 
     DONE;
   })
 
-(define_expand "mask_scatter_store<mode>"
+(define_expand "mask_scatter_store<mode>v64si"
   [(match_operand:DI 0 "register_operand")
-   (match_operand 1 "register_operand")
+   (match_operand:V64SI 1 "register_operand")
    (match_operand 2 "immediate_operand")
    (match_operand:SI 3 "gcn_alu_operand")
    (match_operand:VEC_ALLREG_MODE 4 "register_operand")
@@ -2847,18 +2809,20 @@ 
   {
     rtx exec = force_reg (DImode, operands[5]);
 
-    /* TODO: more conversions will be needed when more types are vectorized. */
-    if (GET_MODE (operands[1]) == V64DImode)
-      {
-	rtx tmp = gen_reg_rtx (V64SImode);
-	emit_insn (gen_truncv64div64si2_exec (tmp, operands[1],
-					      gcn_gen_undef (V64SImode),
-					      exec));
-	operands[1] = tmp;
-      }
+    rtx addr = gcn_expand_scaled_offsets (DEFAULT_ADDR_SPACE, operands[0],
+					  operands[1], operands[3],
+					  INTVAL (operands[2]), exec);
 
-    emit_insn (gen_scatter<mode>_exec (operands[0], operands[1], operands[2],
-				       operands[3], operands[4], exec));
+    if (GET_MODE (addr) == V64DImode)
+      emit_insn (gen_scatter<mode>_insn_1offset_exec (addr, const0_rtx,
+						      operands[4], const0_rtx,
+						      const0_rtx,
+						      exec));
+    else
+      emit_insn (gen_scatter<mode>_insn_2offsets_exec (operands[0], addr,
+						       const0_rtx, operands[4],
+						       const0_rtx, const0_rtx,
+						       exec));
     DONE;
   })
 
diff --git a/gcc/config/gcn/gcn.c b/gcc/config/gcn/gcn.c
index 531f47aff4c..a8fd7d6d52f 100644
--- a/gcc/config/gcn/gcn.c
+++ b/gcc/config/gcn/gcn.c
@@ -1861,15 +1861,6 @@  rtx
 gcn_expand_scaled_offsets (addr_space_t as, rtx base, rtx offsets, rtx scale,
 			   bool unsigned_p, rtx exec)
 {
-  /* Convert the offsets to V64SImode.
-     TODO: more conversions will be needed when more types are vectorized. */
-  if (GET_MODE (offsets) == V64DImode)
-    {
-      rtx tmp = gen_reg_rtx (V64SImode);
-      emit_insn (gen_truncv64div64si2 (tmp, offsets));
-      offsets = tmp;
-    }
-
   rtx tmpsi = gen_reg_rtx (V64SImode);
   rtx tmpdi = gen_reg_rtx (V64DImode);
   rtx undefsi = exec ? gcn_gen_undef (V64SImode) : NULL;