Message ID | 20200218093555.948922-1-poros@redhat.com |
---|---|
State | Accepted |
Delegated to: | David Miller |
Headers | show |
Series | [net-next] phy: avoid unnecessary link-up delay in polling mode | expand |
On 18.02.2020 10:35, Petr Oros wrote: > commit 93c0970493c71f ("net: phy: consider latched link-down status in > polling mode") removed double-read of latched link-state register for > polling mode from genphy_update_link(). This added extra ~1s delay into > sequence link down->up. > Following scenario: > - After boot link goes up > - phy_start() is called triggering an aneg restart, hence link goes > down and link-down info is latched. > - After aneg has finished link goes up. In phy_state_machine is checked > link state but it is latched "link is down". The state machine is > scheduled after one second and there is detected "link is up". This > extra delay can be avoided when we keep link-state register double read > in case when link was down previously. > > With this solution we don't miss a link-down event in polling mode and > link-up is faster. > > Details about this quirky behavior on Realtek phy: > Without patch: > T0: aneg is started, link goes down, link-down status is latched > T0+3s: state machine runs, up-to-date link-down is read > T0+4s: state machine runs, aneg is finished (BMSR_ANEGCOMPLETE==1), > here i read link-down (BMSR_LSTATUS==0), > T0+5s: state machine runs, aneg is finished (BMSR_ANEGCOMPLETE==1), > up-to-date link-up is read (BMSR_LSTATUS==1), > phydev->link goes up, state change PHY_NOLINK to PHY_RUNNING > > With patch: > T0: aneg is started, link goes down, link-down status is latched > T0+3s: state machine runs, up-to-date link-down is read > T0+4s: state machine runs, aneg is finished (BMSR_ANEGCOMPLETE==1), > first BMSR read: BMSR_ANEGCOMPLETE==1 and BMSR_LSTATUS==0, > second BMSR read: BMSR_ANEGCOMPLETE==1 and BMSR_LSTATUS==1, > phydev->link goes up, state change PHY_NOLINK to PHY_RUNNING > > Signed-off-by: Petr Oros <poros@redhat.com> > --- Reviewed-by: Heiner Kallweit <hkallweit1@gmail.com>
From: Petr Oros <poros@redhat.com> Date: Tue, 18 Feb 2020 10:35:55 +0100 > commit 93c0970493c71f ("net: phy: consider latched link-down status in > polling mode") removed double-read of latched link-state register for > polling mode from genphy_update_link(). This added extra ~1s delay into > sequence link down->up. > Following scenario: > - After boot link goes up > - phy_start() is called triggering an aneg restart, hence link goes > down and link-down info is latched. > - After aneg has finished link goes up. In phy_state_machine is checked > link state but it is latched "link is down". The state machine is > scheduled after one second and there is detected "link is up". This > extra delay can be avoided when we keep link-state register double read > in case when link was down previously. > > With this solution we don't miss a link-down event in polling mode and > link-up is faster. > > Details about this quirky behavior on Realtek phy: > Without patch: > T0: aneg is started, link goes down, link-down status is latched > T0+3s: state machine runs, up-to-date link-down is read > T0+4s: state machine runs, aneg is finished (BMSR_ANEGCOMPLETE==1), > here i read link-down (BMSR_LSTATUS==0), > T0+5s: state machine runs, aneg is finished (BMSR_ANEGCOMPLETE==1), > up-to-date link-up is read (BMSR_LSTATUS==1), > phydev->link goes up, state change PHY_NOLINK to PHY_RUNNING > > With patch: > T0: aneg is started, link goes down, link-down status is latched > T0+3s: state machine runs, up-to-date link-down is read > T0+4s: state machine runs, aneg is finished (BMSR_ANEGCOMPLETE==1), > first BMSR read: BMSR_ANEGCOMPLETE==1 and BMSR_LSTATUS==0, > second BMSR read: BMSR_ANEGCOMPLETE==1 and BMSR_LSTATUS==1, > phydev->link goes up, state change PHY_NOLINK to PHY_RUNNING > > Signed-off-by: Petr Oros <poros@redhat.com> Applied, thank you.
diff --git a/drivers/net/phy/phy-c45.c b/drivers/net/phy/phy-c45.c index a1caeee1223617..bceb0dcdecbd61 100644 --- a/drivers/net/phy/phy-c45.c +++ b/drivers/net/phy/phy-c45.c @@ -239,9 +239,10 @@ int genphy_c45_read_link(struct phy_device *phydev) /* The link state is latched low so that momentary link * drops can be detected. Do not double-read the status - * in polling mode to detect such short link drops. + * in polling mode to detect such short link drops except + * the link was already down. */ - if (!phy_polling_mode(phydev)) { + if (!phy_polling_mode(phydev) || !phydev->link) { val = phy_read_mmd(phydev, devad, MDIO_STAT1); if (val < 0) return val; diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c index 2a973265de8095..be0129231c2a1c 100644 --- a/drivers/net/phy/phy_device.c +++ b/drivers/net/phy/phy_device.c @@ -1930,9 +1930,10 @@ int genphy_update_link(struct phy_device *phydev) /* The link state is latched low so that momentary link * drops can be detected. Do not double-read the status - * in polling mode to detect such short link drops. + * in polling mode to detect such short link drops except + * the link was already down. */ - if (!phy_polling_mode(phydev)) { + if (!phy_polling_mode(phydev) || !phydev->link) { status = phy_read(phydev, MII_BMSR); if (status < 0) return status;
commit 93c0970493c71f ("net: phy: consider latched link-down status in polling mode") removed double-read of latched link-state register for polling mode from genphy_update_link(). This added extra ~1s delay into sequence link down->up. Following scenario: - After boot link goes up - phy_start() is called triggering an aneg restart, hence link goes down and link-down info is latched. - After aneg has finished link goes up. In phy_state_machine is checked link state but it is latched "link is down". The state machine is scheduled after one second and there is detected "link is up". This extra delay can be avoided when we keep link-state register double read in case when link was down previously. With this solution we don't miss a link-down event in polling mode and link-up is faster. Details about this quirky behavior on Realtek phy: Without patch: T0: aneg is started, link goes down, link-down status is latched T0+3s: state machine runs, up-to-date link-down is read T0+4s: state machine runs, aneg is finished (BMSR_ANEGCOMPLETE==1), here i read link-down (BMSR_LSTATUS==0), T0+5s: state machine runs, aneg is finished (BMSR_ANEGCOMPLETE==1), up-to-date link-up is read (BMSR_LSTATUS==1), phydev->link goes up, state change PHY_NOLINK to PHY_RUNNING With patch: T0: aneg is started, link goes down, link-down status is latched T0+3s: state machine runs, up-to-date link-down is read T0+4s: state machine runs, aneg is finished (BMSR_ANEGCOMPLETE==1), first BMSR read: BMSR_ANEGCOMPLETE==1 and BMSR_LSTATUS==0, second BMSR read: BMSR_ANEGCOMPLETE==1 and BMSR_LSTATUS==1, phydev->link goes up, state change PHY_NOLINK to PHY_RUNNING Signed-off-by: Petr Oros <poros@redhat.com> --- drivers/net/phy/phy-c45.c | 5 +++-- drivers/net/phy/phy_device.c | 5 +++-- 2 files changed, 6 insertions(+), 4 deletions(-)