[2/4] configs/beeelink_gs1: bump to U-boot 2020.01
diff mbox series

Message ID 20200216211937.27200-2-peron.clem@gmail.com
State New
Headers show
Series
  • [1/4] configs/beeelink_gs1: bump to ATF v2.2
Related show

Commit Message

Clément Péron Feb. 16, 2020, 9:19 p.m. UTC
The U-boot patch has been upstreamed.

Bump U-boot version and drop the patch.

Signed-off-by: Clément Péron <peron.clem@gmail.com>
---
 ...01-arm-dts-sync-dts-for-Allwinner-H6.patch | 279 ------------------
 configs/beelink_gs1_defconfig                 |   3 +-
 2 files changed, 1 insertion(+), 281 deletions(-)
 delete mode 100644 board/beelink/gs1/patches/uboot/0001-arm-dts-sync-dts-for-Allwinner-H6.patch

Patch
diff mbox series

diff --git a/board/beelink/gs1/patches/uboot/0001-arm-dts-sync-dts-for-Allwinner-H6.patch b/board/beelink/gs1/patches/uboot/0001-arm-dts-sync-dts-for-Allwinner-H6.patch
deleted file mode 100644
index 8e695f6416b9..000000000000
--- a/board/beelink/gs1/patches/uboot/0001-arm-dts-sync-dts-for-Allwinner-H6.patch
+++ /dev/null
@@ -1,279 +0,0 @@ 
-From 99cade8743158889b3e8db93c003b3318ebd4bda Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Cl=C3=A9ment=20P=C3=A9ron?= <peron.clem@gmail.com>
-Date: Sun, 11 Aug 2019 22:38:57 +0200
-Subject: [PATCH] arm: dts: sync dts for Allwinner H6
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Sync Kernel DTS for Allwinner H6 boards.
-
-Drop /omit-if-no-ref/ keyword as it's not supported by U-boot.
-
-commit <d45331b00ddb> Linux 5.3-rc4
-
-Signed-off-by: Clément Péron <peron.clem@gmail.com>
----
- arch/arm/dts/sun50i-h6-beelink-gs1.dts | 76 ++++++++++++++++++++++++++
- arch/arm/dts/sun50i-h6-pine-h64.dts    | 12 ++++
- arch/arm/dts/sun50i-h6.dtsi            | 46 +++++++++++++++-
- 3 files changed, 131 insertions(+), 3 deletions(-)
-
-diff --git a/arch/arm/dts/sun50i-h6-beelink-gs1.dts b/arch/arm/dts/sun50i-h6-beelink-gs1.dts
-index 54b0882bed..0dc33c90dd 100644
---- a/arch/arm/dts/sun50i-h6-beelink-gs1.dts
-+++ b/arch/arm/dts/sun50i-h6-beelink-gs1.dts
-@@ -14,6 +14,7 @@
- 	compatible = "azw,beelink-gs1", "allwinner,sun50i-h6";
- 
- 	aliases {
-+		ethernet0 = &emac;
- 		serial0 = &uart0;
- 	};
- 
-@@ -21,6 +22,17 @@
- 		stdout-path = "serial0:115200n8";
- 	};
- 
-+	connector {
-+		compatible = "hdmi-connector";
-+		type = "a";
-+
-+		port {
-+			hdmi_con_in: endpoint {
-+				remote-endpoint = <&hdmi_out_con>;
-+			};
-+		};
-+	};
-+
- 	leds {
- 		compatible = "gpio-leds";
- 
-@@ -41,6 +53,40 @@
- 	};
- };
- 
-+&de {
-+	status = "okay";
-+};
-+
-+&ehci0 {
-+	status = "okay";
-+};
-+
-+&emac {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&ext_rgmii_pins>;
-+	phy-mode = "rgmii";
-+	phy-handle = <&ext_rgmii_phy>;
-+	phy-supply = <&reg_aldo2>;
-+	status = "okay";
-+};
-+
-+&hdmi {
-+	status = "okay";
-+};
-+
-+&hdmi_out {
-+	hdmi_out_con: endpoint {
-+		remote-endpoint = <&hdmi_con_in>;
-+	};
-+};
-+
-+&mdio {
-+	ext_rgmii_phy: ethernet-phy@1 {
-+		compatible = "ethernet-phy-ieee802.3-c22";
-+		reg = <1>;
-+	};
-+};
-+
- &mmc0 {
- 	vmmc-supply = <&reg_cldo1>;
- 	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
-@@ -57,6 +103,15 @@
- 	status = "okay";
- };
- 
-+&ohci0 {
-+	status = "okay";
-+};
-+
-+&pio {
-+	vcc-pd-supply = <&reg_cldo1>;
-+	vcc-pg-supply = <&reg_aldo1>;
-+};
-+
- &r_i2c {
- 	status = "okay";
- 
-@@ -177,8 +232,29 @@
- 	};
- };
- 
-+&r_pio {
-+	/*
-+	 * PL0 and PL1 are used for PMIC I2C
-+	 * don't enable the pl-supply else
-+	 * it will fail at boot
-+	 *
-+	 * vcc-pl-supply = <&reg_aldo1>;
-+	 */
-+	vcc-pm-supply = <&reg_aldo1>;
-+};
-+
- &uart0 {
- 	pinctrl-names = "default";
- 	pinctrl-0 = <&uart0_ph_pins>;
- 	status = "okay";
- };
-+
-+&usb2otg {
-+	dr_mode = "host";
-+	status = "okay";
-+};
-+
-+&usb2phy {
-+	usb0_vbus-supply = <&reg_vcc5v>;
-+	status = "okay";
-+};
-diff --git a/arch/arm/dts/sun50i-h6-pine-h64.dts b/arch/arm/dts/sun50i-h6-pine-h64.dts
-index 4802902e12..1898345183 100644
---- a/arch/arm/dts/sun50i-h6-pine-h64.dts
-+++ b/arch/arm/dts/sun50i-h6-pine-h64.dts
-@@ -127,6 +127,12 @@
- 	status = "okay";
- };
- 
-+&pio {
-+	vcc-pc-supply = <&reg_bldo2>;
-+	vcc-pd-supply = <&reg_cldo1>;
-+	vcc-pg-supply = <&reg_aldo1>;
-+};
-+
- &r_i2c {
- 	status = "okay";
- 
-@@ -243,10 +249,16 @@
- 	pcf8563: rtc@51 {
- 		compatible = "nxp,pcf8563";
- 		reg = <0x51>;
-+		interrupt-parent = <&r_intc>;
-+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
- 		#clock-cells = <0>;
- 	};
- };
- 
-+&r_pio {
-+	vcc-pm-supply = <&reg_aldo1>;
-+};
-+
- &uart0 {
- 	pinctrl-names = "default";
- 	pinctrl-0 = <&uart0_ph_pins>;
-diff --git a/arch/arm/dts/sun50i-h6.dtsi b/arch/arm/dts/sun50i-h6.dtsi
-index e0dc4a05c1..a117f479ae 100644
---- a/arch/arm/dts/sun50i-h6.dtsi
-+++ b/arch/arm/dts/sun50i-h6.dtsi
-@@ -101,7 +101,7 @@
- 		#size-cells = <1>;
- 		ranges;
- 
--		display-engine@1000000 {
-+		bus@1000000 {
- 			compatible = "allwinner,sun50i-h6-de3",
- 				     "allwinner,sun50i-a64-de2";
- 			reg = <0x1000000 0x400000>;
-@@ -203,11 +203,32 @@
- 			#reset-cells = <1>;
- 		};
- 
-+		dma: dma-controller@3002000 {
-+			compatible = "allwinner,sun50i-h6-dma";
-+			reg = <0x03002000 0x1000>;
-+			interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
-+			clocks = <&ccu CLK_BUS_DMA>, <&ccu CLK_MBUS_DMA>;
-+			clock-names = "bus", "mbus";
-+			dma-channels = <16>;
-+			dma-requests = <46>;
-+			resets = <&ccu RST_BUS_DMA>;
-+			#dma-cells = <1>;
-+		};
-+
- 		sid: sid@3006000 {
- 			compatible = "allwinner,sun50i-h6-sid";
- 			reg = <0x03006000 0x400>;
- 		};
- 
-+		watchdog: watchdog@30090a0 {
-+			compatible = "allwinner,sun50i-h6-wdt",
-+				     "allwinner,sun6i-a31-wdt";
-+			reg = <0x030090a0 0x20>;
-+			interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
-+			/* Broken on some H6 boards */
-+			status = "disabled";
-+		};
-+
- 		pio: pinctrl@300b000 {
- 			compatible = "allwinner,sun50i-h6-pinctrl";
- 			reg = <0x0300b000 0x400>;
-@@ -243,6 +264,18 @@
- 				bias-pull-up;
- 			};
- 
-+			/*
-+			 * /omit-if-no-ref/ isn't supported by U-boot
-+			 * keep this comment to avoid bad sync with Linux
-+			 */
-+			mmc1_pins: mmc1-pins {
-+				pins = "PG0", "PG1", "PG2", "PG3",
-+				       "PG4", "PG5";
-+				function = "mmc1";
-+				drive-strength = <30>;
-+				bias-pull-up;
-+			};
-+
- 			mmc2_pins: mmc2-pins {
- 				pins = "PC1", "PC4", "PC5", "PC6",
- 				       "PC7", "PC8", "PC9", "PC10",
-@@ -294,6 +327,8 @@
- 			resets = <&ccu RST_BUS_MMC1>;
- 			reset-names = "ahb";
- 			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
-+			pinctrl-names = "default";
-+			pinctrl-0 = <&mmc1_pins>;
- 			status = "disabled";
- 			#address-cells = <1>;
- 			#size-cells = <0>;
-@@ -445,7 +480,6 @@
- 			resets = <&ccu RST_BUS_OHCI3>,
- 				 <&ccu RST_BUS_EHCI3>;
- 			phys = <&usb2phy 3>;
--			phy-names = "usb";
- 			status = "disabled";
- 		};
- 
-@@ -457,7 +491,6 @@
- 				 <&ccu CLK_USB_OHCI3>;
- 			resets = <&ccu RST_BUS_OHCI3>;
- 			phys = <&usb2phy 3>;
--			phy-names = "usb";
- 			status = "disabled";
- 		};
- 
-@@ -613,6 +646,13 @@
- 			#reset-cells = <1>;
- 		};
- 
-+		r_watchdog: watchdog@7020400 {
-+			compatible = "allwinner,sun50i-h6-wdt",
-+				     "allwinner,sun6i-a31-wdt";
-+			reg = <0x07020400 0x20>;
-+			interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
-+		};
-+
- 		r_intc: interrupt-controller@7021000 {
- 			compatible = "allwinner,sun50i-h6-r-intc",
- 				     "allwinner,sun6i-a31-r-intc";
--- 
-2.20.1
-
diff --git a/configs/beelink_gs1_defconfig b/configs/beelink_gs1_defconfig
index e5354168db5c..c48c02c4508c 100644
--- a/configs/beelink_gs1_defconfig
+++ b/configs/beelink_gs1_defconfig
@@ -8,7 +8,6 @@  BR2_SYSTEM_DHCP="eth0"
 BR2_ROOTFS_POST_BUILD_SCRIPT="board/beelink/gs1/post-build.sh"
 BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh"
 BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/beelink/gs1/genimage.cfg"
-BR2_GLOBAL_PATCH_DIR="board/beelink/gs1/patches/"
 
 # Kernel Linux headers same as kernel, a 5.3 series
 BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_3=y
@@ -32,7 +31,7 @@  BR2_TARGET_ARM_TRUSTED_FIRMWARE_PLATFORM="sun50i_h6"
 BR2_TARGET_UBOOT=y
 BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
 BR2_TARGET_UBOOT_CUSTOM_VERSION=y
-BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2019.10"
+BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2020.01"
 BR2_TARGET_UBOOT_BOARD_DEFCONFIG="beelink_gs1"
 BR2_TARGET_UBOOT_NEEDS_DTC=y
 BR2_TARGET_UBOOT_NEEDS_PYLIBFDT=y