[net-next,1/3] net: phy: broadcom: Allow BCM54810 to use bcm54xx_adjust_rxrefclk()
diff mbox series

Message ID 20200214233853.27217-2-f.fainelli@gmail.com
State Superseded
Delegated to: David Miller
Headers show
Series
  • net: phy: Better support for BCM54810
Related show

Commit Message

Florian Fainelli Feb. 14, 2020, 11:38 p.m. UTC
The function bcm54xx_adjust_rxrefclk() works correctly on the BCM54810
PHY, allow this device ID to proceed through.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
 drivers/net/phy/broadcom.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

Comments

Andrew Lunn Feb. 15, 2020, 4:12 p.m. UTC | #1
On Fri, Feb 14, 2020 at 03:38:51PM -0800, Florian Fainelli wrote:
> The function bcm54xx_adjust_rxrefclk() works correctly on the BCM54810
> PHY, allow this device ID to proceed through.
> 
> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>

Reviewed-by: Andrew Lunn <andrew@lunn.ch>

    Andrew

Patch
diff mbox series

diff --git a/drivers/net/phy/broadcom.c b/drivers/net/phy/broadcom.c
index 7d68b28bb893..4ad2128cc454 100644
--- a/drivers/net/phy/broadcom.c
+++ b/drivers/net/phy/broadcom.c
@@ -194,7 +194,8 @@  static void bcm54xx_adjust_rxrefclk(struct phy_device *phydev)
 	/* Abort if we are using an untested phy. */
 	if (BRCM_PHY_MODEL(phydev) != PHY_ID_BCM57780 &&
 	    BRCM_PHY_MODEL(phydev) != PHY_ID_BCM50610 &&
-	    BRCM_PHY_MODEL(phydev) != PHY_ID_BCM50610M)
+	    BRCM_PHY_MODEL(phydev) != PHY_ID_BCM50610M &&
+	    BRCM_PHY_MODEL(phydev) != PHY_ID_BCM54810)
 		return;
 
 	val = bcm_phy_read_shadow(phydev, BCM54XX_SHD_SCR3);