ext4/002: remove EXT4_EOFBLOCKS_FL test
diff mbox series

Message ID 20200214164249.21868-1-enwlinux@gmail.com
State Not Applicable
Headers show
Series
  • ext4/002: remove EXT4_EOFBLOCKS_FL test
Related show

Commit Message

Eric Whitney Feb. 14, 2020, 4:42 p.m. UTC
This test exercises obsolete ext4-specific functionality that will be
removed in the kernel's 5.7 release.  Once that happens, ext4/002 will
always fail, so remove the test to avoid the noise.

Signed-off-by: Eric Whitney <enwlinux@gmail.com>
---
 tests/ext4/002     | 168 -----------------------------------------------------
 tests/ext4/002.out |   7 ---
 tests/ext4/group   |   1 -
 3 files changed, 176 deletions(-)
 delete mode 100755 tests/ext4/002
 delete mode 100644 tests/ext4/002.out

Comments

Theodore Y. Ts'o Feb. 14, 2020, 4:47 p.m. UTC | #1
On Fri, Feb 14, 2020 at 11:42:49AM -0500, Eric Whitney wrote:
> This test exercises obsolete ext4-specific functionality that will be
> removed in the kernel's 5.7 release.  Once that happens, ext4/002 will
> always fail, so remove the test to avoid the noise.
> 
> Signed-off-by: Eric Whitney <enwlinux@gmail.com>

Reviewed-by: Theodore Ts'o <tytso@mit.edu>

Patch
diff mbox series

diff --git a/tests/ext4/002 b/tests/ext4/002
deleted file mode 100755
index 986834bb..00000000
--- a/tests/ext4/002
+++ /dev/null
@@ -1,168 +0,0 @@ 
-#! /bin/bash
-# SPDX-License-Identifier: GPL-2.0
-# Copyright (c) 2010 Google, Inc.  All Rights Reserved.
-#
-# FS QA Test No. ext4/002
-#
-# Test to ensure that the EOFBLOCK_FL gets set/unset correctly.
-#
-# As found by Theodore Ts'o:
-# If a 128K file is falloc'ed using the KEEP_SIZE flag, and then
-# write exactly 128K, the EOFBLOCK_FL doesn't get cleared correctly.
-# This is bad since it forces e2fsck to complain about that inode.
-# If you have a large number of inodes that are written with fallocate
-# using KEEP_SIZE, and then fill them up to their expected size,
-# e2fsck will potentially complain about a _huge_ number of inodes.
-# This would also cause a huge increase in the time taken by e2fsck
-# to complete its check.
-#
-# Test scenarios covered:
-# 1. Fallocating X bytes and writing Y (Y<X) (buffered and direct io)
-# 2. Fallocating X bytes and writing Y (Y=X) (buffered and direct io)
-# 3. Fallocating X bytes and writing Y (Y>X) (buffered and direct io)
-#
-# These test cases exercise the normal and edge case conditions using
-# falloc (and KEEP_SIZE).
-#
-# Ref: http://thread.gmane.org/gmane.comp.file-systems.ext4/20682
-#
-seq=`basename $0`
-seqres=$RESULT_DIR/$seq
-echo "QA output created by $seq"
-
-here=`pwd`
-tmp=/tmp/$$
-status=1        # failure is the default!
-trap "_cleanup; exit \$status" 0 1 2 3 15
-
-# Test specific macros.
-BIT_NOT_SET=0   # inode flag - 0x400000 bit is not set.
-BIT_SET=1       # inode flag - 0x400000 bit is set.
-
-# Generic test cleanup function.
-_cleanup()
-{
-  cd /
-  rm -f $tmp.*
-}
-
-# Ext4 uses the EOFBLOCKS_FL bit when fallocating blocks with KEEP_SIZE
-# enabled. The only time this bit should be set is when extending the allocated
-# blocks further than what the i_size represents. In the situations wherein the
-# i_size covers all allocated blocks, this bit should be cleared.
-
-# Checks the state of the sample file in the filesystem and returns whether
-# the inode flag 0x400000 is set or not.
-_check_ext4_eof_flag()
-{
-  # Check whether EOFBLOCK_FL is set.
-  # For ext4 filesystems: use debugfs to check if EOFBLOCKS_FL is set.
-  # Other filesystems: do nothing. The default fsck at the end of the test
-  # should catch any potential errors.
-  if [ "${FSTYP}" == "ext4" ]; then
-    bit_set=1
-
-    # Unmount the ${SCRATCH_DEV}
-    _scratch_unmount
-
-    # Run debugfs to gather file_parameters - specifically iflags.
-    file_params=`debugfs ${SCRATCH_DEV} -R "stat ${1}" 2>&1 | grep -e Flags:`
-    iflags=${file_params#*Flags: }
-
-    # Ensure that the iflags value was parsed correctly.
-    if [ -z ${iflags} ]; then
-      echo "iFlags value was not parsed successfully." >> $seqres.full
-      status=1
-      exit ${status}
-    fi
-
-    # Check if EOFBLOCKS_FL is set.
-    if ((${iflags} & 0x400000)); then
-      echo "EOFBLOCK_FL bit is set." >> $seqres.full
-      bit_set=1
-    else
-      echo "EOFBLOCK_FL bit is not set." >> $seqres.full
-      bit_set=0
-    fi
-
-    # Check current bit state to expected value.
-    if [ ${bit_set} -ne ${2} ]; then
-      echo "Error: Current bit state incorrect." >> $seqres.full
-      status=1
-      exit ${status}
-    fi
-
-    # Mount the ${SCRATCH_DEV}
-    _scratch_mount
-  fi
-}
-
-# Get standard environment, filters and checks.
-. ./common/rc
-. ./common/filter
-
-# Prerequisites for the test run.
-_supported_fs ext4
-_supported_os Linux
-_require_xfs_io_command "falloc"
-_require_scratch
-
-# Real QA test starts here.
-rm -f $seqres.full
-
-_scratch_mkfs >> $seqres.full 2>&1
-_scratch_mount
-
-BLOCK_SIZE=$(_get_block_size $SCRATCH_MNT)
-
-# Begin test cases.
-echo "Test 1: Fallocate 10 blocks and write 1 block (buffered io)." \
-    >> $seqres.full
-${XFS_IO_PROG} -f				\
-    -c "falloc -k 0 $((10 * $BLOCK_SIZE))"	\
-    -c "pwrite 0 $BLOCK_SIZE"			\
-    ${SCRATCH_MNT}/test_1 | _filter_xfs_io_blocks_modified
-_check_ext4_eof_flag test_1 ${BIT_SET}
-
-echo "Test 2: Fallocate 10 blocks and write 1 block (direct io)." \
-    >> $seqres.full
-${XFS_IO_PROG} -f -d				\
-    -c "falloc -k 0 $((10 * $BLOCK_SIZE))"	\
-    -c "pwrite 0 $BLOCK_SIZE"			\
-    ${SCRATCH_MNT}/test_2 | _filter_xfs_io_blocks_modified
-_check_ext4_eof_flag test_2 ${BIT_SET}
-
-echo "Test 3: Fallocate 10 blocks and write 10 blocks (buffered io)." \
-    >> $seqres.full
-${XFS_IO_PROG} -f				\
-    -c "falloc -k 0 $((10 * $BLOCK_SIZE))"	\
-    -c "pwrite 0 $((10 * $BLOCK_SIZE))"		\
-    ${SCRATCH_MNT}/test_3 | _filter_xfs_io_blocks_modified
-_check_ext4_eof_flag test_3 ${BIT_NOT_SET}
-
-echo "Test 4: Fallocate 10 blocks and write 10 blocks (direct io)." \
-    >> $seqres.full
-${XFS_IO_PROG} -f -d				\
-    -c "falloc -k 0 $((10 * $BLOCK_SIZE))"	\
-    -c "pwrite 0 $((10 * $BLOCK_SIZE))"		\
-    ${SCRATCH_MNT}/test_4 | _filter_xfs_io_blocks_modified
-_check_ext4_eof_flag test_4 ${BIT_NOT_SET}
-
-echo "Test 5: Fallocate 32 blocks, seek 64 blocks and write 1 block (buffered io)." \
-    >> $seqres.full
-${XFS_IO_PROG} -f					\
-    -c "falloc -k 0 $((32 * $BLOCK_SIZE))"		\
-    -c "pwrite $((64 * $BLOCK_SIZE)) $BLOCK_SIZE"	\
-    ${SCRATCH_MNT}/test_5 | _filter_xfs_io_blocks_modified
-_check_ext4_eof_flag test_5 ${BIT_NOT_SET}
-
-echo "Test 6: Fallocate 32 blocks, seek to 64 blocks and write 1 block (direct io)." \
-    >> $seqres.full
-${XFS_IO_PROG} -f -d					\
-    -c "falloc -k 0 $((32 * $BLOCK_SIZE))"		\
-    -c "pwrite $((64 * $BLOCK_SIZE)) $BLOCK_SIZE"	\
-    ${SCRATCH_MNT}/test_6 | _filter_xfs_io_blocks_modified
-_check_ext4_eof_flag test_6 ${BIT_NOT_SET}
-
-status=0
-exit ${status}
diff --git a/tests/ext4/002.out b/tests/ext4/002.out
deleted file mode 100644
index 1605a115..00000000
--- a/tests/ext4/002.out
+++ /dev/null
@@ -1,7 +0,0 @@ 
-QA output created by 002
-Blocks modified: [0 - 0]
-Blocks modified: [0 - 0]
-Blocks modified: [0 - 9]
-Blocks modified: [0 - 9]
-Blocks modified: [64 - 64]
-Blocks modified: [64 - 64]
diff --git a/tests/ext4/group b/tests/ext4/group
index 9dfc0d35..62483c3f 100644
--- a/tests/ext4/group
+++ b/tests/ext4/group
@@ -4,7 +4,6 @@ 
 # - comment line before each group is "new" description
 #
 001 auto prealloc quick zero
-002 auto quick prealloc
 003 auto quick
 004 auto dump
 005 auto quick metadata ioctl rw