[v3,1/2] dt-bindings: i2c: cros-ec-tunnel: convert i2c-cros-ec-tunnel.txt to yaml
diff mbox series

Message ID 20200213214656.9801-1-dafna.hirschfeld@collabora.com
State Superseded
Headers show
Series
  • [v3,1/2] dt-bindings: i2c: cros-ec-tunnel: convert i2c-cros-ec-tunnel.txt to yaml
Related show

Commit Message

Dafna Hirschfeld Feb. 13, 2020, 9:46 p.m. UTC
Convert the binding file i2c-cros-ec-tunnel.txt to yaml format.

This was tested and verified on ARM and ARM64 with:

make dt_binding_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/i2c/i2c-cros-ec-tunnel.yaml
make dtbs_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/i2c/i2c-cros-ec-tunnel.yaml

Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
---
Changes since v1:
- changing the subject to start with "dt-bindings: i2c: cros-ec-tunnel:"
- changing the license to (GPL-2.0-only OR BSD-2-Clause)
- removing "Guenter Roeck <groeck@chromium.org>" from the maintainers list
- adding ref: /schemas/i2c/i2c-controller.yaml

Changes since v2:
- adding another patch that fixes a warning found by this patch


 .../bindings/i2c/i2c-cros-ec-tunnel.txt       | 39 ------------
 .../bindings/i2c/i2c-cros-ec-tunnel.yaml      | 63 +++++++++++++++++++
 2 files changed, 63 insertions(+), 39 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/i2c/i2c-cros-ec-tunnel.txt
 create mode 100644 Documentation/devicetree/bindings/i2c/i2c-cros-ec-tunnel.yaml

Comments

Sebastian Reichel Feb. 13, 2020, 10:35 p.m. UTC | #1
Hi,

On Thu, Feb 13, 2020 at 10:46:55PM +0100, Dafna Hirschfeld wrote:
> Convert the binding file i2c-cros-ec-tunnel.txt to yaml format.
> 
> This was tested and verified on ARM and ARM64 with:
> 
> make dt_binding_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/i2c/i2c-cros-ec-tunnel.yaml
> make dtbs_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/i2c/i2c-cros-ec-tunnel.yaml
> 
> Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
> ---

[...]

> +examples:
> +  - |
> +    cros-ec@0 {
> +        compatible = "google,cros-ec-spi";
> +        i2c-tunnel {
> +            compatible = "google,cros-ec-i2c-tunnel";
> +            #address-cells = <1>;
> +            #size-cells = <0>;
> +            google,remote-bus = <0>;
> +
> +            battery: sbs-battery@b {

This should be "battery@b {", since node names are supposed to
match the class of the device instead of the name of the device.

> +                compatible = "sbs,sbs-battery";
> +                reg = <0xb>;
> +                sbs,poll-retry-count = <1>;
> +            };
> +        };
> +    };

-- Sebastian

Patch
diff mbox series

diff --git a/Documentation/devicetree/bindings/i2c/i2c-cros-ec-tunnel.txt b/Documentation/devicetree/bindings/i2c/i2c-cros-ec-tunnel.txt
deleted file mode 100644
index 898f030eba62..000000000000
--- a/Documentation/devicetree/bindings/i2c/i2c-cros-ec-tunnel.txt
+++ /dev/null
@@ -1,39 +0,0 @@ 
-I2C bus that tunnels through the ChromeOS EC (cros-ec)
-======================================================
-On some ChromeOS board designs we've got a connection to the EC (embedded
-controller) but no direct connection to some devices on the other side of
-the EC (like a battery and PMIC).  To get access to those devices we need
-to tunnel our i2c commands through the EC.
-
-The node for this device should be under a cros-ec node like google,cros-ec-spi
-or google,cros-ec-i2c.
-
-
-Required properties:
-- compatible: google,cros-ec-i2c-tunnel
-- google,remote-bus: The EC bus we'd like to talk to.
-
-Optional child nodes:
-- One node per I2C device connected to the tunnelled I2C bus.
-
-
-Example:
-	cros-ec@0 {
-		compatible = "google,cros-ec-spi";
-
-		...
-
-		i2c-tunnel {
-			compatible = "google,cros-ec-i2c-tunnel";
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			google,remote-bus = <0>;
-
-			battery: sbs-battery@b {
-				compatible = "sbs,sbs-battery";
-				reg = <0xb>;
-				sbs,poll-retry-count = <1>;
-			};
-		};
-	}
diff --git a/Documentation/devicetree/bindings/i2c/i2c-cros-ec-tunnel.yaml b/Documentation/devicetree/bindings/i2c/i2c-cros-ec-tunnel.yaml
new file mode 100644
index 000000000000..a14d821ff65d
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/i2c-cros-ec-tunnel.yaml
@@ -0,0 +1,63 @@ 
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/i2c-cros-ec-tunnel.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: I2C bus that tunnels through the ChromeOS EC (cros-ec)
+
+maintainers:
+  - Benson Leung <bleung@chromium.org>
+  - Enric Balletbo i Serra <enric.balletbo@collabora.com>
+
+description: |
+  On some ChromeOS board designs we've got a connection to the EC (embedded
+  controller) but no direct connection to some devices on the other side of
+  the EC (like a battery and PMIC). To get access to those devices we need
+  to tunnel our i2c commands through the EC.
+  The node for this device should be under a cros-ec node like google,cros-ec-spi
+  or google,cros-ec-i2c.
+
+allOf:
+  - $ref: /schemas/i2c/i2c-controller.yaml#
+
+properties:
+  compatible:
+    const:
+      google,cros-ec-i2c-tunnel
+
+  google,remote-bus:
+    $ref: "/schemas/types.yaml#/definitions/uint32"
+    description: The EC bus we'd like to talk to.
+
+  "#address-cells": true
+  "#size-cells": true
+
+patternProperties:
+  "^.*@[0-9a-f]+$":
+    type: object
+    description: One node per I2C device connected to the tunnelled I2C bus.
+
+additionalProperties: false
+
+required:
+  - compatible
+  - google,remote-bus
+
+examples:
+  - |
+    cros-ec@0 {
+        compatible = "google,cros-ec-spi";
+        i2c-tunnel {
+            compatible = "google,cros-ec-i2c-tunnel";
+            #address-cells = <1>;
+            #size-cells = <0>;
+            google,remote-bus = <0>;
+
+            battery: sbs-battery@b {
+                compatible = "sbs,sbs-battery";
+                reg = <0xb>;
+                sbs,poll-retry-count = <1>;
+            };
+        };
+    };