@@ -4,7 +4,7 @@ set -e
#set -x
# there is no legacy backend to test
-[[ $XT_MULTI == */xtables-nft-multi ]] || { echo "skip $XT_MULTI"; exit 0; }
+[[ $XT_MULTI == *xtables-nft-multi ]] || { echo "skip $XT_MULTI"; exit 0; }
# fill arptables manually
@@ -3,7 +3,7 @@
set -e
# there is no legacy backend to test
-[[ $XT_MULTI == */xtables-nft-multi ]] || { echo "skip $XT_MULTI"; exit 0; }
+[[ $XT_MULTI == *xtables-nft-multi ]] || { echo "skip $XT_MULTI"; exit 0; }
# arptables-restore reuses preloaded targets and matches, make sure defaults
# apply to consecutive rules using the same target/match as a previous one
@@ -4,7 +4,7 @@ set -e
set -x
# there is no legacy backend to test
-[[ $XT_MULTI == */xtables-nft-multi ]] || { echo "skip $XT_MULTI"; exit 0; }
+[[ $XT_MULTI == *xtables-nft-multi ]] || { echo "skip $XT_MULTI"; exit 0; }
$XT_MULTI arptables -N foo
@@ -1,86 +1,89 @@
#!/bin/sh
+case "$XT_MULTI" in
+*xtables-nft-multi)
+ ;;
+*)
+ echo "skip $XT_MULTI"
+ exit 0
+ ;;
+esac
+
get_entries_count() { # (chain)
$XT_MULTI ebtables -L $1 | sed -n 's/.*entries: \([0-9]*\).*/\1/p'
}
set -x
-case "$XT_MULTI" in
-*/xtables-nft-multi)
- for t in filter nat;do
- $XT_MULTI ebtables -t $t -L || exit 1
- $XT_MULTI ebtables -t $t -X || exit 1
- $XT_MULTI ebtables -t $t -F || exit 1
- done
-
- for t in broute foobar ;do
- $XT_MULTI ebtables -t $t -L &&
- $XT_MULTI ebtables -t $t -X &&
- $XT_MULTI ebtables -t $t -F
- if [ $? -eq 0 ]; then
- echo "Expect nonzero return for unsupported table"
- exit 1
- fi
- done
+for t in filter nat;do
+ $XT_MULTI ebtables -t $t -L || exit 1
+ $XT_MULTI ebtables -t $t -X || exit 1
+ $XT_MULTI ebtables -t $t -F || exit 1
+done
- $XT_MULTI ebtables -t filter -N FOO || exit 1
- $XT_MULTI ebtables -t filter -N FOO
+for t in broute foobar ;do
+ $XT_MULTI ebtables -t $t -L &&
+ $XT_MULTI ebtables -t $t -X &&
+ $XT_MULTI ebtables -t $t -F
if [ $? -eq 0 ]; then
- echo "Duplicate chain FOO"
- $XT_MULTI ebtables -t filter -L
+ echo "Expect nonzero return for unsupported table"
exit 1
fi
+done
- entries=$(get_entries_count FOO)
- if [ $entries -ne 0 ]; then
- echo "Unexpected entries count in empty unreferenced chain (expected 0, have $entries)"
- $XT_MULTI ebtables -L
- exit 1
- fi
- $XT_MULTI ebtables -A FORWARD -j FOO
- entries=$(get_entries_count FORWARD)
- if [ $entries -ne 1 ]; then
- echo "Unexpected entries count in FORWARD chain (expected 1, have $entries)"
- $XT_MULTI ebtables -L
- exit 1
- fi
+$XT_MULTI ebtables -t filter -N FOO || exit 1
+$XT_MULTI ebtables -t filter -N FOO
+if [ $? -eq 0 ]; then
+ echo "Duplicate chain FOO"
+ $XT_MULTI ebtables -t filter -L
+ exit 1
+fi
- entries=$(get_entries_count FOO)
- if [ $entries -ne 0 ]; then
- echo "Unexpected entries count in empty referenced chain (expected 0, have $entries)"
- $XT_MULTI ebtables -L
- exit 1
- fi
+entries=$(get_entries_count FOO)
+if [ $entries -ne 0 ]; then
+ echo "Unexpected entries count in empty unreferenced chain (expected 0, have $entries)"
+ $XT_MULTI ebtables -L
+ exit 1
+fi
- $XT_MULTI ebtables -A FOO -j ACCEPT
- entries=$(get_entries_count FOO)
- if [ $entries -ne 1 ]; then
- echo "Unexpected entries count in non-empty referenced chain (expected 1, have $entries)"
- $XT_MULTI ebtables -L
- exit 1
- fi
+$XT_MULTI ebtables -A FORWARD -j FOO
+entries=$(get_entries_count FORWARD)
+if [ $entries -ne 1 ]; then
+ echo "Unexpected entries count in FORWARD chain (expected 1, have $entries)"
+ $XT_MULTI ebtables -L
+ exit 1
+fi
- $XT_MULTI ebtables -t filter -N BAR || exit 1
- $XT_MULTI ebtables -t filter -N BAZ || exit 1
+entries=$(get_entries_count FOO)
+if [ $entries -ne 0 ]; then
+ echo "Unexpected entries count in empty referenced chain (expected 0, have $entries)"
+ $XT_MULTI ebtables -L
+ exit 1
+fi
- $XT_MULTI ebtables -t filter -L | grep -q FOO || exit 1
- $XT_MULTI ebtables -t filter -L | grep -q BAR || exit 1
- $XT_MULTI ebtables -t filter -L | grep -q BAZ || exit 1
+$XT_MULTI ebtables -A FOO -j ACCEPT
+entries=$(get_entries_count FOO)
+if [ $entries -ne 1 ]; then
+ echo "Unexpected entries count in non-empty referenced chain (expected 1, have $entries)"
+ $XT_MULTI ebtables -L
+ exit 1
+fi
- $XT_MULTI ebtables -t filter -L BAZ || exit 1
- $XT_MULTI ebtables -t filter -X BAZ || exit 1
- $XT_MULTI ebtables -t filter -L BAZ | grep -q BAZ
- if [ $? -eq 0 ]; then
- echo "Deleted chain -L BAZ ok, expected failure"
- $XT_MULTI ebtables -t filter -L
- exit 1
- fi
+$XT_MULTI ebtables -t filter -N BAR || exit 1
+$XT_MULTI ebtables -t filter -N BAZ || exit 1
- $XT_MULTI ebtables -t $t -F || exit 0
- ;;
-*)
- echo "skip $XT_MULTI"
- ;;
-esac
+$XT_MULTI ebtables -t filter -L | grep -q FOO || exit 1
+$XT_MULTI ebtables -t filter -L | grep -q BAR || exit 1
+$XT_MULTI ebtables -t filter -L | grep -q BAZ || exit 1
+
+$XT_MULTI ebtables -t filter -L BAZ || exit 1
+$XT_MULTI ebtables -t filter -X BAZ || exit 1
+$XT_MULTI ebtables -t filter -L BAZ | grep -q BAZ
+if [ $? -eq 0 ]; then
+ echo "Deleted chain -L BAZ ok, expected failure"
+ $XT_MULTI ebtables -t filter -L
+ exit 1
+fi
+
+$XT_MULTI ebtables -t $t -F || exit 0
@@ -4,7 +4,7 @@ set -e
#set -x
# there is no legacy backend to test
-[[ $XT_MULTI == */xtables-nft-multi ]] || { echo "skip $XT_MULTI"; exit 0; }
+[[ $XT_MULTI == *xtables-nft-multi ]] || { echo "skip $XT_MULTI"; exit 0; }
# fill ebtables manually
@@ -3,7 +3,7 @@
set -e
# there is no legacy backend to test
-[[ $XT_MULTI == */xtables-nft-multi ]] || { echo "skip $XT_MULTI"; exit 0; }
+[[ $XT_MULTI == *xtables-nft-multi ]] || { echo "skip $XT_MULTI"; exit 0; }
# ebtables-restore reuses preloaded targets and matches, make sure defaults
# apply to consecutive rules using the same target/match as a previous one
@@ -3,7 +3,7 @@
set -e
# there is no legacy backend to test
-[[ $XT_MULTI == */xtables-nft-multi ]] || { echo "skip $XT_MULTI"; exit 0; }
+[[ $XT_MULTI == *xtables-nft-multi ]] || { echo "skip $XT_MULTI"; exit 0; }
$XT_MULTI ebtables --init-table
$XT_MULTI ebtables -A FORWARD -i nodev123 -o nodev432 -j ACCEPT
@@ -3,7 +3,7 @@
set -e
# there is no legacy backend to test
-[[ $XT_MULTI == */xtables-nft-multi ]] || { echo "skip $XT_MULTI"; exit 0; }
+[[ $XT_MULTI == *xtables-nft-multi ]] || { echo "skip $XT_MULTI"; exit 0; }
EXPECT='*filter
:INPUT ACCEPT
@@ -231,7 +231,7 @@ for table in nat mangle raw filter;do
done
case "$XT_MULTI" in
-*/xtables-nft-multi)
+*xtables-nft-multi)
# nft-multi displays chain names in different order, work around this for now
tmpfile2=$(mktemp)
sort "$tmpfile" > "$tmpfile2"
@@ -86,7 +86,7 @@ if [ $LINES1 -ne $LINES2 ]; then
fi
case "$XT_MULTI" in
-*/xtables-nft-multi)
+*xtables-nft-multi)
attempts=$((RANDOM%10))
attempts=$((attempts+1))
;;
@@ -5,17 +5,18 @@
# xtables: avoid bogus 'is incompatible' warning
case "$XT_MULTI" in
-*/xtables-nft-multi)
- nft -v >/dev/null || exit 0
- nft 'add table ip nft-test; add chain ip nft-test foobar { type filter hook forward priority 42; }' || exit 1
- nft 'add table ip6 nft-test; add chain ip6 nft-test foobar { type filter hook forward priority 42; }' || exit 1
-
- $XT_MULTI iptables -L -t filter || exit 1
- $XT_MULTI ip6tables -L -t filter || exit 1
+*xtables-nft-multi)
;;
*)
echo skip $XT_MULTI
+ exit 0
;;
esac
+nft -v >/dev/null || exit 0
+nft 'add table ip nft-test; add chain ip nft-test foobar { type filter hook forward priority 42; }' || exit 1
+nft 'add table ip6 nft-test; add chain ip6 nft-test foobar { type filter hook forward priority 42; }' || exit 1
+
+$XT_MULTI iptables -L -t filter || exit 1
+$XT_MULTI ip6tables -L -t filter || exit 1
exit 0
@@ -2,7 +2,7 @@
set -e
-[[ $XT_MULTI == */xtables-nft-multi ]] || { echo "skip $XT_MULTI"; exit 0; }
+[[ $XT_MULTI == *xtables-nft-multi ]] || { echo "skip $XT_MULTI"; exit 0; }
$XT_MULTI iptables -A INPUT -p tcp --dport 53 ! -s 192.168.0.1 -j ACCEPT
$XT_MULTI ip6tables -A INPUT -p tcp --dport 53 ! -s feed:babe::1 -j ACCEPT
@@ -2,7 +2,7 @@
set -e
-[[ $XT_MULTI == */xtables-nft-multi ]] || { echo "skip $XT_MULTI"; exit 0; }
+[[ $XT_MULTI == *xtables-nft-multi ]] || { echo "skip $XT_MULTI"; exit 0; }
comment1="foo bar"
comment2="xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx"
When testing host binaries, XT_MULTI variable contains just the program name without path component which most skip checks didn't expect. Fix them, and while being at it also reduce indenting level in two scripts by moving the skip check up front with an early exit call. Fixes: 416898e335322 ("tests/shell: Support testing host binaries") Signed-off-by: Phil Sutter <phil@nwl.cc> --- .../arptables/0001-arptables-save-restore_0 | 2 +- .../0002-arptables-restore-defaults_0 | 2 +- .../arptables/0003-arptables-verbose-output_0 | 2 +- .../testcases/ebtables/0001-ebtables-basic_0 | 135 +++++++++--------- .../ebtables/0002-ebtables-save-restore_0 | 2 +- .../ebtables/0003-ebtables-restore-defaults_0 | 2 +- .../testcases/ebtables/0004-save-counters_0 | 2 +- .../testcases/ebtables/0005-ifnamechecks_0 | 2 +- .../firewalld-restore/0001-firewalld_0 | 2 +- .../testcases/ipt-restore/0004-restore-race_0 | 2 +- .../shell/testcases/nft-only/0001compat_0 | 15 +- .../shell/testcases/nft-only/0002invflags_0 | 2 +- .../nft-only/0003delete-with-comment_0 | 2 +- 13 files changed, 88 insertions(+), 84 deletions(-)