pwm: imx27: fix clk handling in pwm_imx27_apply()
diff mbox series

Message ID
State New
Headers show
  • pwm: imx27: fix clk handling in pwm_imx27_apply()
Related show

Commit Message

Uwe Kleine-König Feb. 9, 2020, 9:31 p.m. UTC
pwm_imx27_apply() enables the clocks if the previous PWM state was
disabled. Given that the clocks are supposed to be left on iff the PWM
is running, the decision to disable the clocks at the end of the
function must not depend on the previous state.

Without this fix the enable count of the two affected clocks increases
by one whenever pwm_apply changes from one disabled state to another.

Fixes: bd88d319abe9 ("pwm: imx27: Unconditionally write state to hardware")
Signed-off-by: Uwe Kleine-König <>
 drivers/pwm/pwm-imx27.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff mbox series

diff --git a/drivers/pwm/pwm-imx27.c b/drivers/pwm/pwm-imx27.c
index 35a7ac42269c..7e5ed0152977 100644
--- a/drivers/pwm/pwm-imx27.c
+++ b/drivers/pwm/pwm-imx27.c
@@ -289,7 +289,7 @@  static int pwm_imx27_apply(struct pwm_chip *chip, struct pwm_device *pwm,
 	writel(cr, imx->mmio_base + MX3_PWMCR);
-	if (!state->enabled && cstate.enabled)
+	if (!state->enabled)
 	return 0;