[OpenWrt-Devel,v2] ath79: add gpio4 pinmux on TL-WR841N/ND v8, WR842N v2, MR3420 v2
diff mbox series

Message ID 20200209153813.19904-1-freifunk@adrianschmutzler.de
State Under Review
Delegated to: Adrian Schmutzler
Headers show
Series
  • [OpenWrt-Devel,v2] ath79: add gpio4 pinmux on TL-WR841N/ND v8, WR842N v2, MR3420 v2
Related show

Commit Message

Adrian Schmutzler Feb. 9, 2020, 3:38 p.m. UTC
This adds a pinmux to the shared DTSI for TP-Link TL-WR841N/ND v8,
TL-WR842N v2 and TL-MR3420 v2. It is supposed to be the equivalent
of:

/* config gpio4 as normal gpio function */
ath79_gpio_output_select(TL_MR3420V2_GPIO_USB_POWER,AR934X_GPIO_OUT_GPIO);

While at it, move the jtag_disable_pins to &gpio node and remove the
redundant status=okay there.

This should allow to enable USB power on these devices.

Fixes: FS#2753

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
---
 target/linux/ath79/dts/ar9341_tplink.dtsi | 12 ++++++++----
 1 file changed, 8 insertions(+), 4 deletions(-)

Patch
diff mbox series

diff --git a/target/linux/ath79/dts/ar9341_tplink.dtsi b/target/linux/ath79/dts/ar9341_tplink.dtsi
index 0a950bd1a6..7c3dc6be96 100644
--- a/target/linux/ath79/dts/ar9341_tplink.dtsi
+++ b/target/linux/ath79/dts/ar9341_tplink.dtsi
@@ -18,9 +18,6 @@ 
 	keys: keys {
 		compatible = "gpio-keys";
 
-		pinctrl-names = "default";
-		pinctrl-0 = <&jtag_disable_pins>;
-
 		rfkill {
 			label = "WiFi";
 			linux,code = <KEY_RFKILL>;
@@ -85,7 +82,14 @@ 
 };
 
 &gpio {
-	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&jtag_disable_pins &pmx_usb_power>;
+};
+
+&pinmux {
+	pmx_usb_power: pinmux_usb_power {
+		pinctrl-single,bits = <0x4 0x0 0xff>;
+	};
 };
 
 &eth0 {